Related
I can't install new ROM.
WinMo ROM:
- I can't use bootloader, because it is still stop at 0%, and than after a few minutes disconnect the connection.
- When I try to rename nbh file to leoimg.nbh and copy to root of storage card, it is write out "Loading..." and thats all.
Android ROM: I have magldr 1.11 and hspl 2.08, select from magldr menu that Flashermode, than start nand rom install, but it is just still don't work.
When I try to install WinPhone7 with flasher mode, it is perfectly works, but don't boot after rom flasher.
Why I can't install new rom?
PLEASE HELP ME, because I can't use my phone now!
try to run task 29 from bootloader:
step 1: phone off: hold down volume down button and then shortly press the power button: the bootloader coloured screen appairs
step 2: connect usb cable (usb should appear on the screen)
step 3: run taks 29 with a radio rom (this can be any radio)
step 4: when phone resets hold down volume down button again you will come into bootloader again and then flash a new (android nand or winmo rom (so go into bootloader first)
The phone is totally empty after task29, so before flashing a nand android rom you will have to install magldr again
This should solve your problem, I hope
I't is not working. I did it yesterday.
It's looks like working, than still stay 0%.
I can't use bootloader with success
slk-A4 said:
try to run task 29 from bootloader:
step 1: phone off: hold down volume down button and then shortly press the power button: the bootloader coloured screen appairs
step 2: connect usb cable (usb should appear on the screen)
step 3: run taks 29 with a radio rom (this can be any radio)
step 4: when phone resets hold down volume down button again you will come into bootloader again and then flash a new (android nand or winmo rom (so go into bootloader first)
The phone is totally empty after task29, so before flashing a nand android rom you will have to install magldr again
This should solve your problem, I hope
Click to expand...
Click to collapse
When I use bootloader allways stop at 0% and still 0% until disconnect.
Other way? I can't use from SD card root too...(leoimg.nbh) because it's stop loading display (like the other way 0%)...
I just bought an HD2 with windows phone 7 already installed. The guy i bought it from said that the phone came like that from the previous owner.
From what I can tell, windows phone 7 has been flashed to the nand/internal memory.
Can someone point me in the direction of where to look to remove this OS so that I can install the other wonderful Rom's developed for the HD2 (android, meego, etc)?
I've been looking around but i'm a little lost.
Thanks!
Personally i would seriously consider taking the HD2 back to its stock defaults and then work forward, the problem of using someone elses work is that you dont actually learn anything, which is what this commuinity is all about
So if you want my advice do an SD card flash of a stock ROM for your device
first things first, go to HTCs website
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
grab yourself a stock ROM (if you have a 1024MB version of the HD2 then be careful!)
extract the file you downloaded, use winrar or 7zip
- Take the "RUU_signed.nbh" and copy it to a blank SD card .
- Rename it to "leoimg.nbh"
- put that SD card in the HD2
- Reset the device while pressing the volume down button.
- Follow directions
that should perform an SD card flash, meaning it will remove absolutely everything and start from scratch, ie Windows Mobile
you can then decide what you want to install and go from there
as a rule the process is HSPL>RADIO>(MAGLDR)>ROM
http://forum.xda-developers.com/showthread.php?t=914924
has some general guides
but as a rule you should really just do to the thread of your chosen OS, that should have some stickys on how to do things and dont forget the wiki!
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
aludus said:
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
Click to expand...
Click to collapse
nope!
your holding down the power button arent you?
take out the battery
hold the vol DOWN key
put the battery in (keep holding down vol down)
then "tap" power button (push and let go) the phone will vibrate a bit
keep holding down the vol down key until the tri colour screen comes on, if you copied the .nbh file and renamed it too your SD card it "should" allow you to install it
i tried it to it stays on red green blue white serial.
i have installed win7 but want to loose it
aludus said:
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
Click to expand...
Click to collapse
afraid not !!
and are you sure you held down the volume down button before pressing the power key !!
cos if you did....i am sorry to say...but yes...i had this issue in the past where i was not at all able to go into the bootloader..the one with the 3 color screen !!
tried everything...finally succeeded !! in case you have this issue...i shall tell you how i was finally able to get into bootloader and flash a stock/custom ROM.
ruthlessboy said:
i tried it to it stays on red green blue white serial.
i have installed win7 but want to loose it
Click to expand...
Click to collapse
yea...so once when you are on the 3 color screen why dont you simply go ahead connect your USB and flash a custom ROM ???
or if you want stock...copy the .nbh file in your SD Card...and the flashing will start automatically...get it ???
Whats your reason for wasnting to remove WP7?
I personally think its better than most roms, and a about tied with the energy rom.
try flashing Yukis V5 and you might prefer WP7
no connection
backlashsid said:
afraid not !!
and are you sure you held down the volume down button before pressing the power key !!
cos if you did....i am sorry to say...but yes...i had this issue in the past where i was not at all able to go into the bootloader..the one with the 3 color screen !!
tried everything...finally succeeded !! in case you have this issue...i shall tell you how i was finally able to get into bootloader and flash a stock/custom ROM.
yea...so once when you are on the 3 color screen why dont you simply go ahead connect your USB and flash a custom ROM ???
or if you want stock...copy the .nbh file in your SD Card...and the flashing will start automatically...get it ???
Click to expand...
Click to collapse
i did all of that but when it comes to flashing it stays on zero and wont flash giving an error
which rom should i use?? and guide please
thank u
i am new so pls help
k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob
thank you i will try that later
Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...
Hi,
I want to instal WP7 on my HTC HD2.
In the tutorial i use i should use the Rom update utility to get MAGLDR on my phone.
When i try to use this utility i don't get further than 0% and after some time i get a error (error 626)
What i did is:
- I reseted my HTC HD2.
- I started the Rom update utility. It says that i need a update from 1.66.404.1 to 2.00.000.0.
- So when i start this it will restart my phone and show me a progres bar.
This will stay on 0% and after 10 minutes the utility gives me a message that says:
You connection is lost(error 626). Than i need to "recover" my phone by taking the battery out and put in in again.
When i do this it wel restart my phone with the WM6.5 so nothing happend.
I tryed the following things:
- A different usb cable and usb port.
- redownload the Rom Update Utility from this site.
- Hard reset my phone.
Nothing happend a still geth the same error.
Does someone know how to fix this?
Or is there a defferent way to install WP7 on my HTC HD2.
Thanks,
Maarten
read tutorial from my signature
I will try that thanks.
I finished step 0.5 and 1.
But when I am at the line "When phone boot in MAGLDR use:"
I get stuck.
The MAGLDR is installed but when the phone restart i get stuck on the white HTC screen.
Any clou what i should do next?
if not boot, press and hold power button to start magldr....
I tryed it but it wont do anything else than go to the white boot sreen with the Green HTC logo.
I tryed to press the power button for a long time and while he is booting.
Butt notting more than te boot screen shows.
The only way to start the phone again is to remove the battery.
I can get in the "red-green-blue-white screen"
I already tryed to reinstall the magldr. But no luck.
And what do you meen with "in not boot"?
The only thing it does do is boot to this logo and that's it. So its always booting when i turn it on...
"if not boot to magldr"
which HSPL you have installed on device?
try install WM6.5 first then install magldr....
first time when phone boot after magldr flashed, must boot to magldr automatically
I have HSPL2.08
It doesn't start the magldr automatically.
Even if i hold the power button. It just starting with a white boot screen with HTC logo.
Don't know how to install wm6.5 again.
Please help. I would like to use my phone tomorow again.
Edit:
Maybe it's bricked...
boot to threecolor screen and flash WM6.5
Ok I flash back to WM6.5
What to do now?
Follow the instructions again i asume.
Anyway many thanks for your help!!!
yes, after flash, install magldr and continue...
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
you cant flash WP7 without magldr menu (setting options and enable USB flasher in magldr)...
yes this magldr is ok...
http://forum.xda-developers.com/showthread.php?t=893618
to be sure, which version of HD2 you have?
also check data in bootloader screen (threecolor)
Data in bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Version:
I know i don't have the t-mobile version.
HTC HD2 T8585
MasterMaarten said:
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
Click to expand...
Click to collapse
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
hjhjhj said:
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
Click to expand...
Click to collapse
I used the manual from dxdy:
STEP 0.5 - from same beginning, WP7 never or not installed on phone
- If needed (if Android NAND installed, or if any error during flash
process, erase NAND with Task29). Flashing WM6.5 not needed.
- if you have SIM locked phone and want unlock with code, you can this only in WM6.5
- insert formatted microSD card to FAT32 in phone
- flash radio if you want (if flash version available) or use radio upgrade during ROM flashing (put radio file
part00.bin in data.zip file before ROM flash)
STEP 1. - when HSPL and/or MAGLDR not installed
- Flash HSPL 2.08 if needed (put device in bootloader before Flash:
press and hold Volume down + Power button)
- Flash MAGLDR 1.13 (put device in bootloader before Flash:
press and hold Volume down + Power button)
Click to expand...
Click to collapse
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
MasterMaarten said:
I used the manual from dxdy:
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
Click to expand...
Click to collapse
you should do task29 whether you have android or not....between flashes even if wp7. task29 cleans out the memory area where the OS will reside.
as for the radio...radio thread for the TMOUS radio is here:
http://forum.xda-developers.com/showthread.php?t=1111613
more than likely you shouldn't have to flash a radio, but it won't hurt. only have to do it once.
in order to use the rom flash utility...you have to go into magdlr main screen...scroll down to and select 10. Services, then select 5. CleanMBR, and then 4. Uselast24NAND. Finally, back at the main set of options select 5. USB Flash.
Then you kick off your DWI.exe in admin mode.
I managed to flash a stock rom back, because i wanted to go to another ROM now. I have HSPL 2.08. installed and now i want to install MAGLDR 1.13. However, if i make activesync connection and i let the MAGLDR program install, the HD2 goes to bootloader, then shows the installation loading screen for half a second and then just goes back to bootloader. I just cant get MAGLDR installed and so i cant use my device, i really need help because I dont have a backup device, help plz!
HD2 Toolkit 4.2.0.1;
http://www.mediafire.com/?2qz0xa7xfxney47
Radio ROM 2.15.50.14;
http://www.mediafire.com/?1th8o158r2t6dba
And your Android ROM.....
This is use for NAND Android ROM installation.
First of all, Format your SDCARD like FAT32 with your PC . you must create over your sdcard ext3 or ext4 partition area size of 1Gb with a partition tool. Copy your Android ROM inside the FAT32 partition. Then insert it to your HTC.
If you have EU model HTC HD2 can continue.
1. Setup HD2 Toolkit in your PC(Win7) and start it.
2. Close your phone completly.
3. Push "Volume Down" button and "Call Off" button same time until your phone shows you 4 different colored screen. You must check if your HSPL is 2.08.HSPL.
4. Plug your phone to PC, and see "Serial" to "USB" sign.
5. HD2 Toolkit is our assistance. Push the "Task29" button and go on. it will fomat your phone. You must push the "Volume Down" button when you see %100 on the screen and wait until you see 4 colored screen. Of course you must check again "USB" sign.
6. Now, Unzip "Radio 2.15..zip" on your desktop, then you will have 2 files. Launch DAF.exe with Administrator rights using your right click.. Go on and push the "Volume Down" button when you see %100 on the screen and wait until you see 4 colored screen. check again "USB" sign.
7. Push the HD2 Toolkit "magldr" button and go on. Don't touch any thing this time, when it finished, it will open up with magldr.
8. Use volume up down button and select "4 USB Flash" mode with "Call answer" button. When you see on the screen "USB Flash......USB" then choose "System Partition Size (MAGLDR)=custom" and write "cache size (in MB)=5" (or whatever) left side on the HD2 Toolkit and push the "Repartition" button. Write correct partition number(for example 200). (some rom has 5/200/5.. it shows that (CWM size = 5MB/System size = 200MB/Cache size = 5MB)) and go on...
9. Reboot your HTC Device. When magldr screen show up, select "AD Recovery" with volume down-up, push the "Call Answer" button.
10. Select the "install zip file" and select "install zip from sdcard" and choose your rom and go on.
that's all..
Niekzb said:
I managed to flash a stock rom back, because i wanted to go to another ROM now. I have HSPL 2.08. installed and now i want to install MAGLDR 1.13. However, if i make activesync connection and i let the MAGLDR program install, the HD2 goes to bootloader, then shows the installation loading screen for half a second and then just goes back to bootloader. I just cant get MAGLDR installed and so i cant use my device, i really need help because I dont have a backup device, help plz!
Click to expand...
Click to collapse
To install MAGLDR, you must enter the tri-clour screen(bootloader).
1. Turn off your phone
2. While keeping the voloume down button pressed, turn it on. (Dont let the volume down button go until you see the tri-colour screen)
3. Then connect the phone to the pc via usb
4. Make sure the activesync connects.
5. The "serial" on the bootloader will change to "usb"(this part is on your phone)
6. Now flash MAGLDR
Hope it helps
Really appreciate the help but look, when i try Task 29 or anything else that needs the bootloader, it says USB in the bootloader screen, and i also hear the sound when you connect a usb to you windows pc. But then when I open task 29 i get connection errors. I am sure i have HSPL 2.08. I get connection errors with everything I try to flash; stock rom, task 29, magldr...
Have you ever try to run Task29 with "run as Administrator", or you should stop your antivirus.
or...
You can try to replace your driver with this one..
Google Android Drivers
http://d-h.st/jIk
Just tried all that, didnt work. Also task 29 cant make connection for some reason while USB is on the screen in bootloader..
But for some reason i did manage to flash the radio..
NVM, for some reason i just worked! thanks for the help!
i didn't do anything but i can just accept "thanks" button
well, if you could help me just 1 more time.. haha. Now when i try to install recovery with the DAF file, the USB Flasher mode just freezes.. cant flash it. what now?!
man,I think that one of your drivers may be effecting your HTC Driver. Don't touch anything when DAF is running.
mmmm.. your cable may be broken, don't touch it when in progress..
Or you must reboot your computer, sometimes it works.
Will try now, be right back !
Nope, didnt work.. closed as much processes as i could but still nothing.. getting desperate, dont have a phone tomorrow if I cant get it to work. Isnt there a way to install recovery without flasher mode? any other ideas?
sorry man.. check your "ActiveSync". and i don't have another idea..
You can try to install from SD card