Hi, i really need some help. I am trying to install android on my HTC leo but my call 'accept' key doesnt work so when i am getting to the part in DAF.exe where i have to use the volume buttons to scroll up and down and select (out of the 12 options) different options i cant choose one.
Is there a way around this?
Thanks
J
No. You are probably stuck running winmo with android on sd, unless someonhe edits magldr/cwm to use a different key, which currently no one has.
Get you call/send key working is about the only option you have.
Related
HELP
I installed WM2K5 V1.60, happy as a baby.
But by installing the first ppc-program the mda2 won’t reset
I try anything also put the battery out and in it stays at the same screen, see attachment...PLEASE HELP
Do you mean it wont go back to WM2003 ?
If so then , thats because you have installed a new ROM ont your phone ... it will never be able to return to the old WM2003 you used to see when doing a hard reset because that software has been overwrote by the new WM2005 ROM.
There most likely will be a way to downgrade to WM2003 though.
If thats not what u ment then im sorry for talkin crap
You are saying it is sticking on the boot screen, but it was ok until you installed a program? Which program did you install?
try to format storage
you better go tho the wiki page and find how to hard-reset
then go to the boot menu and format the storage i beleave that will solve it
The program that I installed was the [email protected]#$% “MobiMate WorldMate 2005 Professional V3.0.20”
I let the battery out for the night and I tried this morning,
I know I was desperate so you try anything
I try also to overwrite the WM2k5, no contact with the mda2.
If the picture (see attachment) is showing the “hard reset” then I don it, without result...it sty at the start screen (see above)
If hard-reset is other combination, then please show me
Guys please help
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
pschoch said:
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
Oh man, you are an angel
Respect, for the master, who bring my mda2 back to life
Giga thanks mate
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
avatar_ro said:
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
Click to expand...
Click to collapse
Have you READ the Wiki?
Good luck
(
i dont know whats happening !!!!!!!!!!!!
but i tried EVERYTHING and still stucks at bootloader screen!!!
the thing is ... that this method does not work "1) Use two fingers to simultaneously press the RECORD and CAMERA buttons of the phone (on the phone's left side). Whilst these two buttons are depressed, use the stylus to click the soft-reset button underneath the phone - keep the two buttons depressed until the boot loader screen appears.
2) This should enable three options on the boot screen. These options allows a YES/NO response. Use the RECORD and CAMERA buttons to navigate between the options, and switch the YES/NO values. Set the following:
1] Enable KITL: NO (this is a debug tracing option which isn't required, except possibly for developers)
2] Format Registry Hive: YES (clears the registry)
3] Format Storage: YES (formats the internal memory: "\" directory, and under "\RamDisk\". Items under any storage card "\Storage Card\" are not formatted).
i can make a YES or NO at KTL but i cant scroll down with those keys to enable option 2 and 3
any ideas?
3) Once these options are set, press the MAIL button (in between today and the Pocket IE button) to confirm these options, and continue with the Registry and Storage format.
4) The device performs the reset, and the Windows CE setup screens (ie. screen alignment etc.) appear. Continue as per a new install.
"
I am new to running droid on my leo, I seem to be having trouble getting the command line correct for soft keys while using the latest version of home tab editor. Having the clrcad.exe and haret.exe as soft keys would be ideal for me. I have android on my sd. any suggestions?
odes said:
I am new to running droid on my leo, I seem to be having trouble getting the command line correct for soft keys while using the latest version of home tab editor. Having the clrcad.exe and haret.exe as soft keys would be ideal for me. I have android on my sd. any suggestions?
Click to expand...
Click to collapse
Why do you have to make things complicated when you can install EBL or JMZ and put a shortcut on Home Tab?
I have Jmz dualboot installed on my device memory but do not see it in my list of programs when attempting to add it as a free link, I am also new to the hd2(have had it about a month) so still learning it as well, Adding it as a shortcut was my first choice but when I could not find it as an option I figured just custom softkey it with it's command line. Perhaps I installed jmz incorrectly?
got it thank for the suggestion
Hi guys, I need help. Today I hacked android device HTC Aria and installed WindowsCE 6.5! Everything working perfect expect hardware buttons (but volUp and volDown working). I want to change layouts for button keypad "call, home, menu, back, endcall". Where is stored preferences about hard keys, is this is in registry or it is in a dll? Thanks!
you can down rom , change rom
Hi all, Not been around for a long time, but I've picked up a HD2 to play around with WP7.
Settled on Yuki/XBmods BTTF ROM - fully updated (8107). Although I have an issue with the physical keys on the device - they only light up when they're being pressed - they don't remain on for a few seconds afterwards.
I've installed Leo Advanced (As I've read that can change those settings), but when I try to load up key map, the HD2 will vibrate once then close Leo Advanced (It has full root permissions through use of WP7 Root Tools).
Is there a registry setting where I can change this, or a fix I've overlooked to get Leo Advanced working? I've tried a search but I'm not finding anything specific to this ROM. If I use pdaimates or Ansars rom the backlit keys are fine.
No backlight on BTTF (Cotulla Driver not installed)
I'm guessing there's no way around this?