Related
The old keyboard still comes up. I installed the .CAB file and I don't know what else to do. help me Please be patient with me. Just switched from G1 to this phone literally 1 day ago. Still not used to 6.5 WinMO.
you have to either hold down the arrow key next to the keyboard button or hold down the button itself. When I first got my TMOUS HD2 I had to hold down the arrow key. But after flashing it to kumar, I just had to hold down the keyboard button.
it works! As simple as that seemed, I feel like a completely dumbass noob.
thread can be closed now
I installed Swype 3.9 and everything worked fine. I accidentally uninstalled it because some skin cab I installed didn't work so I was trying to delete that file but instead I deleted Swype program file through file explorer. I know, dumb.
I tried to re-install the swype cab but everytime I try, program file folder doesn't install and the keyboard doesn't appear. I have no idea why it doesn't install program file folder. Anyone have solution to my problem?
Just reflashed the image on my phone to the latest Energyrom Sense 2.5
Since doing so, I have problems with Copilot Live 8. It appears to be an issue with the screen overlay as the menu buttons for Copilot are down at the bottom of the screen where this ROM has the start button.
When in Copilot the start button is covered up by the copilot screen and the menu buttons do not work at the bottom.
Any ideas on how to fix?
I am also using Co Pilot live. And while it does consume the full screen, hard buttons work just fine. I am using the Titanium only version, as I use SPB MS as my primary shell.
Have you tried uninstalling and reloading CoPilot?
I think that's by design for Copilot. Opera 10 and Mini 5 also hog up the whole screen. If you need the start menu, and you don't have a device that already has a hard start button, perhaps you can map one of your hard keys to the start menu w/ the Rhodium Keyboard Config floating around these boards.
I'm using Copilot 8 on an Energy's latest 21903 rom, and it works just fine.
I unfortunately cannot do an uninstall as I cannot select the up arrow in the bottom left corner when copilot is running.
I can do a re-install by running the CAB again and it finishes OK.
All other areas of the screen work, but since I cannot select the up arrow bottom in the lower left corner, I cannot change any settings, or modify anything. It's stuck once it comes up.
Ran find in the previous energy ROM I had loaded.
Reflashing to ER 21903 Sense 2.5 and will Re-Install copilot to see what happens.
I'm totally stumped on this one!
I've wiped the device several times with Task 29 and re-flashed with several different builds of 21903 with no luck.
Co-Pilot is on my flash drive and I have deleted the folders, re-copied from my PC and kicked off the CAB files again. Still no luck.
My problems started after putting on 23569 build which puts the start button right across the bottom of the screen where the copilot buttons are located.
I thought task 29 would wipe everything and get me back to start, but it appears that there is something leftover somewhere that is causing this.
Anyone care to give some thoughts?
[email protected] said:
I'm totally stumped on this one!
I've wiped the device several times with Task 29 and re-flashed with several different builds of 21903 with no luck.
Co-Pilot is on my flash drive and I have deleted the folders, re-copied from my PC and kicked off the CAB files again. Still no luck.
My problems started after putting on 23569 build which puts the start button right across the bottom of the screen where the copilot buttons are located.
I thought task 29 would wipe everything and get me back to start, but it appears that there is something leftover somewhere that is causing this.
Anyone care to give some thoughts?
Click to expand...
Click to collapse
Weird, I had problems with my tp2 after installing 23569 and loading copilot... put me in a bootloader loop 4 times. Not completely sure that this combo is involved, but the problems started after the maxmanila version of 23569 was flashed. For more details see this thread: http://forum.xda-developers.com/showthread.php?t=691984
let me know how it goes...
You could try this...
1. Hard Reset (with phone off hold down talk and end buttons and press the power button)
2. abort setup
3. start to bootloader
4. flash task 29
5. reflash HardSPL
6. Flash favorite ROM
7. Load Copilot
This sequence is what I finally did to overcome whatever broke mine. Keep in mind that I am still testing the fix AND I am not smart enough to know what I didn't need to do but it's working and I am using copilot without problems.
Hi all
I had the exact same issue.
When choosing the language during the installation the "next" arrow at the bottom of the screen didnt work.
The issue was with a 28xxx rom.
After in installed a 21xxx rom the issue wasnt solved.
Eventualy i reinstalled the original rom from the htc site....still no luck!
I noticed, on my sd-card there was one cab file for installation (copilot_wmsp.cab)
Om my pc there were two cabfiles: copilot_wmsp.cab and copilot_wmppc.cab.
Probable for use on an SmartPhone or PocketPC.
When i copied the files from my pc to my phone and installed copilot_wmsp.cab the issue still wasent solved.
When i installd copilot_wmppc, it worked perfectly. The configuration screen has a little diffrent layout, and that worked.
Now i have the latest energyrom 28xxx with working Copilot!
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
bravo261 said:
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
Click to expand...
Click to collapse
yes i have the android folder on the root of my card,
yes i tried an other card
yes i do follow instructions all the time
hopefully someone else will reply then. i'm also using an energy rom, and i just hit clrcad and then haret and i end up booting into android after the initial setup time.
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
frostmore said:
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
Click to expand...
Click to collapse
i also have .50 for the rado version and i tried many ROMs but no luck, i also reflashed my phone
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Check you RAM in WM. If it's 320mb, you can't run Android for now...
Sent from my Desire HD using XDA App
malaeus said:
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Click to expand...
Click to collapse
all done but still the same problem, task29, update radio, update ROM, flash,
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
frostmore said:
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
Click to expand...
Click to collapse
- htc leo 576 MB RAM size
- Manila version 2.5.20181527.0
- radio 2.08.50.05
- Rom thedarkone (dexter)
- Model # HTC HD2 T8585
- OS 5.2.23148
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Hi - I think your response here may have answered my thread as well The end of this dream..
http://forum.xda-developers.com/showthread.php?t=859504
There one thing you can do to run Android on your HD2. yes, I have an HD2 too and currently T-Mobile. 8 month experience with it.
I noticed your Radio is 2.08. There is a latest version which is 2.15.50.14. If you flash your radio, it might going to work. Try it though.
Since you already got HardSPL, you are good to flash radio. Get the 2.15.50.14 in the link: http://forum.xda-developers.com/showthread.php?t=611787
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
uta77 said:
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
I can confirm this is working! Thank you very much!
After using Android MCCM HD 4.0 http://forum.xda-developers.com/showthread.php?t=954030 i was unable to launch any unsigned WiMo application including haret, total commander, sktools and any registry editor!
schnurzelat
Thanks!
@uta77 : Thanks! Yours was the only solution that worked!
Actually, just running SDA_ApplicationUnlock.exe was enough for me to get CeRegEdit to change the registry - after changing policy 0000101a to 1, all apps started working again!
thanks uta77
uta77
thank you really much! i was all evening arguing with myself to avoid an hard reset. and you solved my problem.
Big Thanks!
I had to make all your suggested changes before it worked but saved me from a hard reset!
Hi, i really need some help. I am trying to install android on my HTC leo but my call 'accept' key doesnt work so when i am getting to the part in DAF.exe where i have to use the volume buttons to scroll up and down and select (out of the 12 options) different options i cant choose one.
Is there a way around this?
Thanks
J
No. You are probably stuck running winmo with android on sd, unless someonhe edits magldr/cwm to use a different key, which currently no one has.
Get you call/send key working is about the only option you have.