1. Is there any way to let my BT haedset Blutrek G2 work beside BT SonyEricsson car kit HCB 30? I mean that even if I pared both on my Qtek2020, I can't decide wich of them to use on incoming or makeing a call, becouse just one of them will work (generally the first one pared).
2. How can I let my TOMTOM BT Receiver be recognized by other GPS SoftWare tomtom 3.03 apart?
...sorry for my poor English
thanx a lot for your time!
:wink: :wink: :wink:
anyone has the same problem ?
When I'm using TomTom 5 as navigator and i receive or make a phone call, the navigator stops everything and when a finished my phone call everything comes back again.
Why ?????
I have the same and I thought it was normal beacuse the bt can handle only one device, isn't it?
No
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Re: No
filippino said:
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Click to expand...
Click to collapse
In fact, I did manage to get 3 connections (GPS, Headset, ActiveSync) at one time w/o problem.
To answer yr original question, my Tomtom 5.0 works fine on phone call.
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
BTW, I am using GPS Gate all the time so that I can open 2 GPS software (TT and Routis 2). Maybe that's another reason I didn't have problem.
I have the same problem.
I am using i TREK GPS and Jabra 800.
When im navigating, and in the middle I receieve a phone call, the GPS connection hangs even after the phone call ends.
I usualy make a SR after that and continue navigating.
What is the problem??
Thank you
Same story is with my MDA T-Mobile Compact:
EVERY (I stress it) EVERY time I use it with Jabra BT-800 and GPS receiver BT-338 when OziExplorerCE is on for a short time suddenly Ozi hangs. I try to restart it - no way, when BT option is touched, Magician says: NO BT HARDWARE ON THIS DEVICE INSTALLED. Only SR (sometimes even only HR) helps.
Tried to use JAM_Bluetooth_No_Hardware_Patch-1.CAB - it does not help.
Is there a solution? GURU, wake up, please!
Same sad story. This time it's about PocketGPSMoscow software, GPS BT-338 and SBH-100 BT Hand-free.
Every time there is an incoming call, the device looses BT connection to the GPS module.
Turning BT on and off does help,but doesn't bring much comfort. I hope this is not the BT-338 problem.
Should anyone have any bright ideas on how to find a solution to the problem, many will be very greateful.
It's strange. I really doesn't have any problem w/ my Imate Jam (flashed w/ O2 Traditional Chinese 1.11 rom) using my TomTom BT GPS w/ Sony HBH 600 BT headset.
Maybe you guys can try the following to see if it works. (for rom of 1.11 or later)
1. pair yr GPS w/ the pda.
2. In BT Com port setting, make sure both incoming port for Com4 and outgoing port for Com5 is check
3. Install GPSGate, set input port as Com5 and create virtual port Com6
4. Uninstall TomTom BT GPS driver since U doesn't need it at all
5. In TomTom GPS setting, choose "Other GPS" and choose "Franson VSerial Com6"
Let me know if this works 4 U or not.
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
If you ask me : the problem isn't with your BT but with the phone.
I only use an GPS BT receiver and if somebody calls me, i pick up the phone and also then the GPS disconnects until the call ended ...
zoom21 said:
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
Click to expand...
Click to collapse
I've got 1.12 and I'm sure GSM is not involved - BT is the dead fish.
Every time I have a BT connection with Jabra and BT-338 simultaneously, EVEN when there is NO incoming calls, BT + GPS hang the Magician.
Unfortunately I do not remember if this bug happens when Only BT-338 is connected. Will check and report.
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
Hello all,
Just thinking about purchasing a SPV M600 as a back up phone to M5000. Without using a bluetooth headset HTC can be a littly bricky to hold as phone. Used VC constantly with M5000 can I presume rightly that there is no problems with Voice Command installations on SPV M600? Thanks for taking to the time to and hopefully supply an answer.
Tom
Blackburn (UK)
No problems at all with voice commands for contacts apps etc, you can even configure one of your buttons to activate voice command. I can call anyone on my contact list with the press of 1 button
Voice Command v1.5
Thanks for giving your comments. Reaaly helpful in making my purchasing decision.
Altough you can use MS Voice Command 1.5 on the Prophet, you can experience peformance problems. You will also notice that changing your SIP could take a long time (i.e. changing INPUT from Keyboard to something else).
The problem is not the Prophet but MS Voice Command and WM5. The software has not been optimised for WM5 :-(
Hi all,
finally got my Ameo with CarKit and MS Voice Command through CarKit running...
but: the electronic German is very bad to understand, and - on the other hand - you must have very much look to be understood by your Ameo (and Voice Command).
Who has some more experience with that software ?
Dieter
do you use voicecommand 1.5 for 1.6?
I'm using 1.6
Dieter