Related
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
which parrot system do you have and what firmware
tested qtek 2020 1.66 without Bluetooth Tools
DriveBlue 3.13 o.k.
CK3000 3.13 o.k
CK3100 4.02 o.k
CK3300 4.02 o.k GPS tested with Destinator 3 :roll:
CK3500 4.02 o.k GPS tested with Destinator 3
Hi
I have ROM 1.60, the parrot worked until I installed the bluetooth tools, and now it doesn't
Cheers
JustinP
so uninstall bluetooth tools
I have unistalled the bluetoth tools, and the parrot now works, but as predicted the gps does not.
I need both of these thing working, and if they dont the device will be going back.
I cant beleive how unfinished the spv-m1000 is.
JustinP
justinp said:
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
Click to expand...
Click to collapse
same here
i deinstalled bt tools. only solution to get my parrot ck3000 v3.13 working correctly (most of the time)
regards ize|man
I do have the same problem.
But I'm not using a GPS right now and running without Bluetooth Tools. Like izeman said, this way it's working most of the time.
Currently I am planning on buying a bluetooth GPS Receiver and am pretty much interested in an solution.
So if you find one, please let us all know.
mobileprofi said:
CK3300 4.02 o.k GPS tested with Destinator 3
CK3500 4.02 o.k GPS tested with Destinator 3
Click to expand...
Click to collapse
Can you post your experience with CK3x00. How is it working with XDA II? Like CK3000 or better?
I am not able to use the latest version of BT Tools too because of the CK3000. Try the previous version. My Carkit works ok, but I dont have GPS.
Ian
IanF said:
My Carkit works ok, but I dont have GPS.
Ian
Click to expand...
Click to collapse
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Madcap Magician said:
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Click to expand...
Click to collapse
Features are limited, the caller gets echo (but that I am sure this is just an installation issue), without a mount it is impossible to dial while on the move and I still tend to plug it in to charge it while on the move (cig lighter).
Its not as good as I thought it would be and I am thinking of going for a fixed installation. This is no reflection on the kit, just the way I use it.
Hope this helps?
BT tools Plantronics, Parrot and Seefree
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Hi,
If you are using BT Tools v 1.1.0.0 (12.4.2004) it wont. You need to go back a version.
Ian
so with version 1.0.1.2 it should work? :?
PTD said:
so with version 1.0.1.2 it should work? :?
Click to expand...
Click to collapse
Works for me.
Re: BT tools Plantronics, Parrot and Seefree
I tried a previous version of BT tools... doesn't work. Any ideas? But de-installing works fine. But I can only connect one headset (BT Tools recognizes both the plantronics as the parrot as a headset and without BT Tools it can manage only one headset. But then... with BT Tools it doesn't wordk at all...)
PTD said:
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Click to expand...
Click to collapse
Hi, I've planned to by the new XDAII i (in Belgium the Qtek 2020).
Does anybody can tell me if it is OK with a bluetooth car Kit? With the XDAII normal, I have a lot a Bleutooth problems that I hadn't with the Mini.
Thanks for your answers.
I've had no issues with the BT on XDA2i, other than my old headset wouldn't work with it - something i've now discovered was probably more to do with the headset than the phone.
All other aspects of BT work a dream.
Cheers
Ant
PS - XDA2i uses a Widcomm (now Broadcom) BT stack, not the MS one as used on the 2.
Still can't get my XDaIIi to send files via BT to my laptop! :evil: I tried it with my old XDA 2 and it works a treat........
Someone please help, i don't know how many times i've posted this topic
anyone has the same problem ?
When I'm using TomTom 5 as navigator and i receive or make a phone call, the navigator stops everything and when a finished my phone call everything comes back again.
Why ?????
I have the same and I thought it was normal beacuse the bt can handle only one device, isn't it?
No
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Re: No
filippino said:
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Click to expand...
Click to collapse
In fact, I did manage to get 3 connections (GPS, Headset, ActiveSync) at one time w/o problem.
To answer yr original question, my Tomtom 5.0 works fine on phone call.
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
BTW, I am using GPS Gate all the time so that I can open 2 GPS software (TT and Routis 2). Maybe that's another reason I didn't have problem.
I have the same problem.
I am using i TREK GPS and Jabra 800.
When im navigating, and in the middle I receieve a phone call, the GPS connection hangs even after the phone call ends.
I usualy make a SR after that and continue navigating.
What is the problem??
Thank you
Same story is with my MDA T-Mobile Compact:
EVERY (I stress it) EVERY time I use it with Jabra BT-800 and GPS receiver BT-338 when OziExplorerCE is on for a short time suddenly Ozi hangs. I try to restart it - no way, when BT option is touched, Magician says: NO BT HARDWARE ON THIS DEVICE INSTALLED. Only SR (sometimes even only HR) helps.
Tried to use JAM_Bluetooth_No_Hardware_Patch-1.CAB - it does not help.
Is there a solution? GURU, wake up, please!
Same sad story. This time it's about PocketGPSMoscow software, GPS BT-338 and SBH-100 BT Hand-free.
Every time there is an incoming call, the device looses BT connection to the GPS module.
Turning BT on and off does help,but doesn't bring much comfort. I hope this is not the BT-338 problem.
Should anyone have any bright ideas on how to find a solution to the problem, many will be very greateful.
It's strange. I really doesn't have any problem w/ my Imate Jam (flashed w/ O2 Traditional Chinese 1.11 rom) using my TomTom BT GPS w/ Sony HBH 600 BT headset.
Maybe you guys can try the following to see if it works. (for rom of 1.11 or later)
1. pair yr GPS w/ the pda.
2. In BT Com port setting, make sure both incoming port for Com4 and outgoing port for Com5 is check
3. Install GPSGate, set input port as Com5 and create virtual port Com6
4. Uninstall TomTom BT GPS driver since U doesn't need it at all
5. In TomTom GPS setting, choose "Other GPS" and choose "Franson VSerial Com6"
Let me know if this works 4 U or not.
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
If you ask me : the problem isn't with your BT but with the phone.
I only use an GPS BT receiver and if somebody calls me, i pick up the phone and also then the GPS disconnects until the call ended ...
zoom21 said:
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
Click to expand...
Click to collapse
I've got 1.12 and I'm sure GSM is not involved - BT is the dead fish.
Every time I have a BT connection with Jabra and BT-338 simultaneously, EVEN when there is NO incoming calls, BT + GPS hang the Magician.
Unfortunately I do not remember if this bug happens when Only BT-338 is connected. Will check and report.
After trying at least 10 different conbinations of rom/bt stack/patch, finally get bt GPS and A2DP headset to co-exist on my XDA II. I want to thank the brains of this forum...
BTW, Here is the first impression:
1.A2DP functioning well.
2.AVRCP also works!
3.Sound quality is great, no dropping/cut-off.
4.Machine is a bit slower when streaming music.
5.Occational re-bonding of the BT GPS receiver needed, but painless, takes less than a minute.
Still enjoying/testing...
I'm using i-Mate PPCPE (XDA II), Moto HT-820 headset, Belkin(Fortuna?) BT GPS receiver. WM5 ROM 2.01a.32WWE (dl from buzzdev), Radio 1.18.00...
Thanks again guys!
WOW, please tel us how?
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Re: WOW, please tel us how?
MrGucciman said:
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Click to expand...
Click to collapse
If you only need stereo headset, ROM1.72WWE will be okay, just install widcomm BT stack (http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=73), you don't need wm5.
If you have BT GPS as well, you need to upgrade to wm5, everything works; or you can use xda2jojo's WM2003seUpgrade (http://forum.xda-developers.com/vie...days=0&postorder=asc&highlight=2003se&start=0), but you have to switch between MS BT stack and wicomm BT stack to use stereo headset and GPS.
good luck.
Dear All,
I'm looking for a tools to switch off/on Freehand.
Why ? Because to use Tomtom bluetooth GPS, Freehand should be off (can't attach 2 devices at same time).
Thanks for your help !
Silkup.
silkup said:
Dear All,
I'm looking for a tools to switch off/on Freehand.
Why ? Because to use Tomtom bluetooth GPS, Freehand should be off (can't attach 2 devices at same time).
Thanks for your help !
Silkup.
Click to expand...
Click to collapse
really? hrmm i wonder if it's just the bluetooth version then on the hermes, cause i use tomtom 6 on my hermes and i have talked to my wife on my bluetooth headset while tom tom stayed running on my way home from work
that's 2 devices at same time as my gps is bluetooth
and so is my headset
cyberjak said:
really? hrmm i wonder if it's just the bluetooth version then on the hermes, cause i use tomtom 6 on my hermes and i have talked to my wife on my bluetooth headset while tom tom stayed running on my way home from work
that's 2 devices at same time as my gps is bluetooth
and so is my headset
Click to expand...
Click to collapse
Hello !
If I
1 : switch off "freehand option" of my headset
2 : Start Tomtom
3 : switch on "freehand option"
It's working, but 3 hours to start tomtom
Regards,
Silkup.
2 bluetooth devices WM6
i'am using WM6 from Helmi.
With official WM2003 ROM and widcomm stack i can use
headset adn GPS at the same time, but with WM6 and
MS stack no.
Are there some methods to solve this issue?
Does exists widcomm for WM6?
Thank's