MS Voice Command German - Advantage X7500, MDA Ameo General

Hi all,
finally got my Ameo with CarKit and MS Voice Command through CarKit running...
but: the electronic German is very bad to understand, and - on the other hand - you must have very much look to be understood by your Ameo (and Voice Command).
Who has some more experience with that software ?
Dieter

do you use voicecommand 1.5 for 1.6?

I'm using 1.6
Dieter

Related

Project VCABT - Voice Command Activation over Bluetooth

UPDATED 11/12/05
Just to clarify. This patch enables you to launch Voice Command (or any other app) by pressing your bluetooth headset button. It DOES NOT transfer sytem audio to the headset OR allow you to issues Voice commands via the headset. Its still a top peice of work tho ;-)
Some people also have an issue where the BT headset audio receiver will stay on indefinitely using up its battery unless you place a call or turn it off.
I dont get this issue. YMMV!
--
rmg.
UPDATED 24/11/05
There is now a working patch to enable BT Audio streaming to STEREO BT headsets only.
http://forum.xda-developers.com/viewtopic.php?t=33532
This works fine with VCABT patch
--
rmg.
UPDATED 20/08/05
You need to be logged in to download the zip file!
--
rmg.
UPDATED 14/08/08
Dear all.
There is now a working hack to allow voice dial activation from a bluetooth headset.
NOTES
1. This hack DOES NOT transfer system audio to the headset via bluetooth. That is still being worked on.
2. This hack only works on the HTC Magician.
To date it has worked on all Magician types including:
iMate Jam
Qtek S100 S110
MDA Compact
Orange M500
VPA Compact
XDA MINI
Instructions:
Download the zip and install the cab file to enable the hack. Thats it!
Note:
The cab file will place a copy of voicecmd.exe in /windows and rename it to Voice Signal Launcher.exe
If you use another voice activation program you will have to copy the .exe, put it in /windows and rename it to Voice Signal Launcher.exe
If you have any questions not covered here please ask them in the thread and somewill help
Credits:
Hack created by Psneddon
Cab created by adamz
Scroll down to the bottom of the post to grab the file!
--
rmg.
Original post below:
Hi,
I am making a new thread for all discussion related to getting voice command working over bluetooth, i.e you push the button on your headset and the Voice Command activates.
This functionality has been achieved on the Eten M500, which uses the M$ bluetooth stack
See
http://translate.google.com/transla...&hl=en&ie=UTF-8&oe=UTF-8&prev=/language_tools
Stack the Bluetooth implemented in the Eten M500 has been realized from the same Eten on the base of stack the Microsoft.
The society has enriched it, and this is now in a position to offering the following profiles: Service Discovery, Headset and Hands-free, Dial-up, Object Exchange, Generic Access, Serial Port and Gateway-audio.
This last one is of great importance, since beyond guaranteeing I listen of the sounds of system or the reproduced MP3 in cap (optional), allows the operation of the application Voice Commander (about which we will speak in the next page), concurring to directly command the device from a Bluetooth earpiece.
E' instead absent profile PAN (Person Network Area), that it would have allowed the device to approach Internet in presneza of points of Bluetooth access.
Click to expand...
Click to collapse
We need a dump of the Eten M500 rom, and then we need someone with more braincells than me ;-) to extract the Bluetooth stack....
Is this possible / doable?
Click to expand...
Click to collapse
Yess please!!! That's what we've been waiting for the whole time!!!
Let's make it work, ppl!
Did you notice if your JAM is in sleep mode pusing button on the headset actually wakes it up? At least, that what happenes with my Bluespoon AX, also it supports last number dialing by pressing volume buttom fro more that 2 sec. It prooves that JAM understands keypresses on the headset! Even on pre-production MPX unit it worked with MS stack!
Did the MPX have the M$ stack?
It may be easier to get a rom dump of that rather than the ETEN,
IIRC it was only the pre production MPX's that enabled VC over BT?
Does anyone here own a Pre ProMPX or an Eten 500?
There are many people on HowardForums that have both phones.
The hard part is to get them to do it.
i can hang up a call with my scala500 bluetooth headset, it just will not answer.....
From what I can see on this translated page, ETEN has a bit more advanced bt stack than JAM. I am not sure, if that is MS newer stack or ETEN's customized stack. Either way, I want it.
as far as I know.. the BT stack used by E-Ten 500 is made by the same company that made the device....
I hope we can get this to work.... :wink: it's very nice to have something more advanced the stupid M$ BT stack...
Hello guys.I have an .exe file that is a firmware upgrade for Eten P700 that probably have the same bt stak that M500,because it is using voice command 1.5 from Cyberon.
If any one want to try to play with that .exe i can upload it to somewhere.
Can you upload it please to XDA-DEV ftp site?
Cyberon's Voice Commander is different from Microsoft Voice Command. Can anyone confirm that it's Voice Command from Microsoft that even supports this feature at all?
contribuition
I have a QTEK9090 but i think this happens in all models, so it could work on all models:
with the bluetooth headset ON, if you press ANSWER on the headset, if wakes the phone and you hear kind of a phoneline noise. I know the QTEK can't send/receive sound to/from bluetooth if its is not in a call (BT3900). What we have to try, is to build a program that accepts signal from the phoneline, like it would try to make a phone call so that bluetooth comunication is ON, and then listen to the micro to get the voice dialer message. Instead of trying to make the QTEK send/receive normal audio thruw BT, why not make a program that access the phone line to send/receive audio? the quality is not the same, but we could shurelly could voice dial at least.
I'm not a PPC programmer, but i've done some programs in other languages, so I have a programmer mind Hope this helps someone who knows how to program for this device.
byMaC
Here we go lads.It is english languaje. P700_V44 .zip 17711KB
ftp://xdaupload:[email protected]/P700_V44 .ZIP
BTW if any one can extract the cab´s files of cyberon voice command and post it i will apreciate it,because i still looking for version 1.5 to install it on my Qtek S100.
User22 said:
BTW if any one can extract the cab´s files of cyberon voice command and post it i will apreciate it,because i still looking for version 1.5 to install it on my Qtek S100.
Click to expand...
Click to collapse
I only have the 1.2 version
jackleung said:
User22 said:
BTW if any one can extract the cab´s files of cyberon voice command and post it i will apreciate it,because i still looking for version 1.5 to install it on my Qtek S100.
Click to expand...
Click to collapse
I only have the 1.2 version
Click to expand...
Click to collapse
Well,i mince stracting from the firmware that i allready uploaded.
Any news about extracting something from that file ???
Please Please Please Please can any developer who is willing to help with this head over to HoFo and this thread:
http://www.howardforums.com/showthread.php?t=655524
Where there are several ETEN 500 owners ready to help.
To reiterate, the plan is to find a way to dump the ETEN ROM, and then have a look and try to work out how they enriched the M$ BT stack to allow Voice Command to work over Bluetooth.
Many thanks.
--
rmg.
I have n eten M500. Jus tell me what exactly i haveta do and i will do all that i can.
Can you dump out a copy of the bluetooth stack?
I'm not an expert...mm...hope some one can give you the right advice!
I dunno if there is a way to put in a cab the installation..however do exist something like an upgrade? I mean on the Eten cd there is something like a bluetooth upgrade or something helpfull?
Hoping someone can direct this hack.
Come on, we've got a chance! There's a user who want to help us...

SPV M600 & MS Voice Command v1.5

Hello all,
Just thinking about purchasing a SPV M600 as a back up phone to M5000. Without using a bluetooth headset HTC can be a littly bricky to hold as phone. Used VC constantly with M5000 can I presume rightly that there is no problems with Voice Command installations on SPV M600? Thanks for taking to the time to and hopefully supply an answer.
Tom
Blackburn (UK)
No problems at all with voice commands for contacts apps etc, you can even configure one of your buttons to activate voice command. I can call anyone on my contact list with the press of 1 button
Voice Command v1.5
Thanks for giving your comments. Reaaly helpful in making my purchasing decision.
Altough you can use MS Voice Command 1.5 on the Prophet, you can experience peformance problems. You will also notice that changing your SIP could take a long time (i.e. changing INPUT from Keyboard to something else).
The problem is not the Prophet but MS Voice Command and WM5. The software has not been optimised for WM5 :-(

Voice command 1.6 & Bluetooth

So, I go Voice Command 1.6, and BT Voice command config 0.9f (Mentioned in this thread) and I cannot get the voice dial to work through bluetooth. The exact software works fine on a TyTn (Hermes - Tested on a cingular 8525). I tried a complete nuke & page on my Wizard (Cingular 8125) and installed just the voice command and the BT Voice command config. Still no dice. Any ideas?
thardie said:
So, I go Voice Command 1.6, and BT Voice command config 0.9f (Mentioned in this thread) and I cannot get the voice dial to work through bluetooth. The exact software works fine on a TyTn (Hermes - Tested on a cingular 8525). I tried a complete nuke & page on my Wizard (Cingular 8125) and installed just the voice command and the BT Voice command config. Still no dice. Any ideas?
Click to expand...
Click to collapse
Info on your BT device might help here my friend. I'm using a nXZEN 5500 and have no trouble. Actually, since going to this 1.60 I DON'T have to run any reg tweaks/hacks.

Voice Command Button

Hi All
Have just flashed my Orange SPV M3100 with Schaps WM6 Pro 3.60a, which is so far one of best WM6 upgrades I have tried . Only problem is that Voice command button on side no longer works , and my Bluetooth head set will not enable voice command either.
Can some on please help as voice dialling is important part of my old wm5 as can’t use phone to dial while driving.
Have had more time to search looks like i need Cyberon Voice Dialer, but cnat find it yet.

[Q] disable voicedial posible??

Looking for some days now..
I have a parrot mki9000. a basic bluetooth carkit
if I press the callbutton on the parrot, voicedial on the phone kicks in.
The parrot used to say: who would you like to call ( in dutch, with winmobile )
now I have to bend to the phone to say the name.
I seem not to be able to disable the google voicedial.
cyanogenmod 7 3.00 on HTC HD2
Is this happening to me only?
Is this a parrotproblem? have upgraded firmware
is this an androidproblem?
Is this a cyanogedmodproblem?
thanks
Frank
I have the same problem with my motorola devy (on froyo) in combination with parrot 9100.
I liked the parrot's own voice dailing better then the android voice command.
Anyone's got a solution?
gr marc

Categories

Resources