Strange touch screen problem - HD2 Android Q&A, Help & Troubleshooting and Genera

I've run into a problem as of late. The top 1/4" of my touch screen only works sometimes, and when i long press the power button and the power off menu comes up the entire touch screen stops working but the hard buttons still work fine, and if i get out of the power off menu the touch screen still doesnt work. I figure this has to be some sort of software problem.
Has anyone else experience this? I figure this has to be some sort of software problem. i did a task 29 and formatted my sd card and everything but the problem still persists. If any one has anyone can shed some light on this it would be much appreciated. It's a very annoying problem. Im using hyperdroid gbx v11

It's not a software but a hardware problem...i hope your phone is still under warranty, because you need a display and/or digitizer replacement. The hd2 has a construction weekness, the digitizer's connector is under the power off button, so if you push hard or very often that button, that can causes this error...a lot of people in this board have/had this problem

pappt said:
It's not a software but a hardware problem...i hope your phone is still under warranty, because you need a display and/or digitizer replacement. The hd2 has a construction weekness, the digitizer's connector is under the power off button, so if you push hard or very often that button, that can causes this error...a lot of people in this board have/had this problem
Click to expand...
Click to collapse
thankfully im still under warranty. Thanks for the help

Related

New X01HT owner with questions

hi, i'm a new owner and there are a few things that are bugging me and i'm not sure if it's normal or if it's problematic.
-the start menu pops up sometimes when i slide out the keyboard. is this normal?
-the device can only be charged when the usb is connected to my computer, but not when the usb is connected to an ac adapter.
-keys are mixed up (i supposed because of the Japanese keyboard layout, and i think i saw a fix for this)
when sliding out the keyboard, it takes about 6-8 seconds to adjust from portrait to landscape(with the start menu popping up when going to landscape).
-is it normal for the touchscreen to be completely unresponsive when the keyboard is slid out?
-the touchscreen is completely unresponsive sometimes while the keyboard is hidden and i have to either press random buttons or slide the keyboard in and out to get response back.
sorry for my noobishness and thanks in advance.
ok i've managed to solve the keyboard layout problem and i guess the delay is typical,. but the following problems/issues still exist:
-the start menu pops up sometimes when i slide out the keyboard. is this normal?
-the device can only be charged when the usb is connected to my computer, but not when the usb is connected to an ac adapter.
-is it normal for the touchscreen to be completely unresponsive when the keyboard is slid out?
-the touchscreen is completely unresponsive sometimes while the keyboard is hidden and i have to either press random buttons or slide the keyboard in and out to get response back.
thanks in advance.
anyone? any kinda help would be great
ji1386 said:
ok i've managed to solve the keyboard layout problem and i guess the delay is typical,. but the following problems/issues still exist:
-the start menu pops up sometimes when i slide out the keyboard. is this normal?
-the device can only be charged when the usb is connected to my computer, but not when the usb is connected to an ac adapter.
-is it normal for the touchscreen to be completely unresponsive when the keyboard is slid out?
-the touchscreen is completely unresponsive sometimes while the keyboard is hidden and i have to either press random buttons or slide the keyboard in and out to get response back.
thanks in advance.
Click to expand...
Click to collapse
Hi ji1386
I'm afraid that does not sound good. I have seen at least two other cases where the keyboard being slid out causes the start menu to pop up. It was concluded that pressure is being put on the touch sensitive screen by the mechanism. This is a hardware issue and can also show as programmes suddenly closing for no ovvious reason and I think this may also be responsible for the touch screen not responding when keyboard open. In summary pressure on the touch sensitive screen somewhere when there should not be.
If the device is under warranty I'd go for an immediate replacement. Perhaps just before doing so I would try a HARD reset just to be sure.
Mike
mikechannon said:
Hi ji1386
I'm afraid that does not sound good. I have seen at least two other cases where the keyboard being slid out causes the start menu to pop up. It was concluded that pressure is being put on the touch sensitive screen by the mechanism. This is a hardware issue and can also show as programmes suddenly closing for no ovvious reason and I think this may also be responsible for the touch screen not responding when keyboard open. In summary pressure on the touch sensitive screen somewhere when there should not be.
If the device is under warranty I'd go for an immediate replacement. Perhaps just before doing so I would try a HARD reset just to be sure.
Mike
Click to expand...
Click to collapse
hi, thanks a lot for the response. it really helps. now for the other problems
-is it normal for the the touchscreen to stop responding to taps when the keyboard is slid out?
ji1386 said:
hi, thanks a lot for the response. it really helps. now for the other problems
-is it normal for the the touchscreen to stop responding to taps when the keyboard is slid out?
Click to expand...
Click to collapse
No it's not normal. The screen should respond as normal. For example when using word, even with the keyboard ou you should still be able to tap for the soft keyboard, tap on bold, centre, tap in text to inser a word etc etc.
If you can't I think it's because the keyboard mechanism is somehow putting pressure at some point on the screen i.e the same issue as the start menu popping up. If a hard reset does not cure this then it's a repair job or replacement under warranty I'd say.
Mike
mikechannon said:
No it's not normal. The screen should respond as normal. For example when using word, even with the keyboard ou you should still be able to tap for the soft keyboard, tap on bold, centre, tap in text to inser a word etc etc.
If you can't I think it's because the keyboard mechanism is somehow putting pressure at some point on the screen i.e the same issue as the start menu popping up. If a hard reset does not cure this then it's a repair job or replacement under warranty I'd say.
Mike
Click to expand...
Click to collapse
thanks mike for all your help.
More bad news...since yesterday, the touch-screen no longer responds at all...completely unresponsive to tap or touch. I've tried hard/soft reseting and still got nothing...
I have however managed to get it to charge through a wall outlet. but it's a bit buggy...
Unfortunately, I bought this phone used locally and the guy isn't responding to any of my phone calls/emails, but whatever karma will come back to haunt him...I was thinking about taking this to a small claims court, but i dunno how to go about doing so and if my case will hold up...
anyway, I've had to take it to a repair shop. They said they'd order in a screen and replace it for $150 cad and it should fix it, if not a diagnosis charge of 20 bucks...
this should bring the total cost of this phone to $725cad...great...
Hopefully it solves all my problems. I'm guessing the start menu problem and the touch responsiveness problems get solved after this.
ji1386 said:
thanks mike for all your help.
More bad news...since yesterday, the touch-screen no longer responds at all...completely unresponsive to tap or touch. I've tried hard/soft reseting and still got nothing...
I have however managed to get it to charge through a wall outlet. but it's a bit buggy...
Unfortunately, I bought this phone used locally and the guy isn't responding to any of my phone calls/emails, but whatever karma will come back to haunt him...I was thinking about taking this to a small claims court, but i dunno how to go about doing so and if my case will hold up...
anyway, I've had to take it to a repair shop. They said they'd order in a screen and replace it for $150 cad and it should fix it, if not a diagnosis charge of 20 bucks...
this should bring the total cost of this phone to $725cad...great...
Hopefully it solves all my problems. I'm guessing the start menu problem and the touch responsiveness problems get solved after this.
Click to expand...
Click to collapse
I certainly hope it works out ok. Changing the screen assumes (possibly correctly) that the screen is at fault. If the screen is fine just getting pressure put on it somewhere then it will be a bit of luck whether it solves problem or not. A key problem here is that the screen is sensitive to touch, even on the area under the bezel - which of course is absolutely daft. Combine this with the fact that there is not a lot of room for heat expansion and the slide out keyboard can cause minor distortions in the casing and you have potential for a certain percentage of devices to have problems. Thankfully now far less than early models but still being reported.
Good Luck
Mike
Took it to a repair shop this week. Opened it up and looks like a damaged flex ribbon cable (possibly from sliding out the keyboard or just a faulty cable) is the culprit behind the unresponsive touchscreen.
Apparently those are impossible to find (if not very hard). i live in Canada where parts for these phones are quite scarce, so I'm not too sure what i should do. The guy said he could try to find a replacement part, but it'd take almost a month.
Anyway, just thought I'd mention it to let anyone with unresponsive touch screens know. I guess just add this to the list of possible causes.
how did you fix keyboard layout problem
Ji1836,
Can you please let me know how you solved the keyboard layout problem.
I also have a softbank X01HT with a japanese keyboard layout. I have upgraded to WM6 BLACK 2.5. But some keys are mixed up like the dot and comma and others as well. I tried the fixes in the wiki but nothing worked.
Aprreciate your help.

Touchscreen not responsive unless left softkey is constantly pressed

Hey guys!
I've seen people complain about broken Wizard LCD/touchscreen around here but none of them said anything about partially functioning touchscreen. So here it goes:
A few days ago my phone stopped responding to taps. Just like that! I updated the phone with the latest ROM from HTC (official) and no change. Since then I've been lurking this forum trying to find something similar ...
I've flashed it with custom roms, now I'm trying the WM6 with the hope that maybe the touchscreen will respond to taps by itself, without me having to keep the left softkey pressed while tapping. I can't decide if this is a hardware or a software issue.
If anyone should have any idea about this, please advise. I'm not afraid to open it up or anything like that...
ps: waiting on a replacement touchscreen I ordered off of eBay. ($12)
Thanks a bunch,
kevin
Same Problem
My touchscreen has been acting up lately and today it just stopped working. Tried many things like you with no luck. However I followed your advice on pressing the left soft key and the touch screen started working.
Does anyone have any clues?
touch screen prob.
if your touch screen is not responding then you have to chang the touch screen if it responce some where in time then you open you device and just resolder the touch screen film connector (back side of screen)its just get drysoldered thats why these things happen like you press rite side of screen and it geting work again if relese its stop working................
you have to do only re sloder the connector of touchscreen
Different Problem
Like the post originator said, the screen does work, you just have to hold the left soft key down while tapping. Also did take it apart and didn't see any problems.
Mine just developed this issue, anyone have a fix? I've got a digitizer (Touch panel) on order from ebay as a 1st step. Anyone have any other ideas?
Thanks!
Ok this is odd, but I'm suddenly having the same issue. Touchscreen doesn't work unless I'm holding the left soft key as well... This has to be software right? Anyone have any ideas yet?
I dont have this problem.. but this is 'interesting' I'm wondering, if it is hardware or software problem. For hardware problem, you can try pressing on the area around the left softkey rather than the left softkey. For hardware, you can check to see if it is working after a hardreset?
phillyjaq said:
Ok this is odd, but I'm suddenly having the same issue. Touchscreen doesn't work unless I'm holding the left soft key as well... This has to be software right? Anyone have any ideas yet?
Click to expand...
Click to collapse
This issue has to be related to corrupted software that was installed, I mean how can this many people have the same exact problem around the same time if it's hardware related. Compare notes: All those having this issue,submit the most recent software that was installed, and if everyone installed the same thing, then that's the culprit!
8125
2.25.11.1

Touch Screen Not working.. plz help.

Hi mates yesterday i bought a used herm...with excellent condition. but when i opened any dialog. the window closed automatically. and the screen light remains always on. and touch is creating problems.
and after some time the touch screen totally stop working. i dont know what happened. al the buttons are working fine. i upgraded my t-mobile herm to its original t-mobile wm6 rom. and again the touch screen is not working. and the screen light always stay on..
so is this hardware or software problem.?
guide me if you have any clue about this..
according to my thinking.. i think some button is pressed continuesly.. but everything is working fine.. only the touch is not working.
broken digitizer for the touch screen, buy a replacement lcd/digitizer together and replace yourself, about $100Aud. Use Mike Channons site to download the service manual. Use the search function and type in "htc service manual hermes".
As for the light, you will have to use your buttons to navigate to settings>system>backlight>battery power and external power. you can select how long the backlight remains on for.
Cheers...
Hi mate thanks for your reply.. Actually the situation is that. the screen is working perfectly. all buttons are also working perfectly. but suddenly the touch feature stopped working.
that time i was just opening some menus and they closed automatically. it looks like that there is some button pressed. and the screen light never stops. it continuously remains on. all buttons are working perfectly and everything. on the touch feature is not working.
i upgraded my device with genuine shipped t-mobile wm6 rom and again it stopped at the starting screen where i have to click the screen and the device brings the window for stylus adjustment.
so i wanna ask that is this also possible that some touch drivers are corrupted or something like this.? or is this a hardware failure.?
Kind Regards
I had same problem, it was hardware. Thats why I said to change the lcd. It is theoretically possible to replace JUST the digitizer, BUT, it is a MAJOR hassle.
As for getting past the alignment stage, look up Remote Screen Alignment. Its a cab file that stores the alignment settings on your pc. You WILL have to have a friend that has the same phone so you can get their settings as you need to copy them to your pc first. You can then copy the settings to your phone so you can use it until you replace that pesky lcd...
Cheers.....
I had a similar problem with my hermes. After a lot of investigating, I found out that this is a heat related issue with the hermes. The unit will heat up an some connection somwhere gets messed up and continually registers ghost taps on the upper right corner of the screen, which causes the continual opening and closing of programs/task manager. This overloads the phone which then causes the screen to eventually become unresponsive due to excessive computing.
With my phone, it must be heat related because it will only occur during or after heavy use or overcharging. Other people have had this exact problem with the conclusion being overheating. The worse part is, there is apparently no way to fix this, replacing the screen doesn't change anything. setting your screen alignment very far left will fix the problem but then everything you tap needs to be compensated for.
Good luck, hate to be the harbinger of bad news, but it's better to know whats wrong and that you can't fix it then not know whats wrong and keep trying to fix it.
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
kingsfan said:
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
Click to expand...
Click to collapse
Some of the suggestions in the white screen thread/s might help. The problem is that those who have the heat related problem will find it very difficult to trace the actual fault. The heat may be causing miniscule expansions on the boards / components and connectors. The tiniest of cracks or poor connections can therefore break with the expansion.
Another theory is that rather than heat it might be a capacitor that is breaking down either over time or again through heating. Unless you are a skilled electronic engineer that is virtually impossible to check, particularly since schematics are not available.
You might just be lucky if you dismantled and re-assembled - it might just re-set a connector or adjust a board so it does not get affected in future. That would be very much a matter of luck and of course potentially the situation might be made worse!
Mike
Hi mates. I am back with some issue.. i moved my device to a repair center and he said that its a software issue. and he fixed my device without changing any rom.. i dont know how..
but again when i open some window like programs. the right scrollbar make a problem... when i move scrollbar it automatically press the top close button..i aligned my screen 3 times but same problem with right side scroll bar.
and after playing with it. the touch totally stopped.
now the thing is.all the buttons are working fine and everything is working fine. even sms and calls. but when i check sms and press my scroller button. it displays the right click menu instead of opening the sms. and the screen light is continuesly on. as something is pressed. so. i think this thing wil help. i am now trying this method to check my pc.
http://inuchanbt.blog54.fc2.com/blog-entry-99.html
check this out as well.
i will send you details soon.
might just have something lodged between the case and screen.. also to get rid of the screen alignment, cable it up and delete welcome from the startup programs and then reset it.. should get you past it so at least you can use it until you repair your screen

[Q] [HELP] Hardware Buttons Pressing Eachother

I just got an HD2 so I could run mango.
Only one problem though.
The hardware buttons are pressing each other.
For example,most of the time when i press the back button ,it presses the power button instead. It's like the spring or whatever is pressing down both if them and hutting the power button first. It also happens a lot when I press the Windows button,which will press down the back button instead. It's definitely a hardware issue. Has anyone else had this issue? Does anyone have a possible fix?
Thank you!
Somehow, the flex assembly for the buttons became misaligned. You will have to take apart your hd2 to fix it..
Has anyone else had this problem and successfully fixed it?
e334 said:
Somehow, the flex assembly for the buttons became misaligned. You will have to take apart your hd2 to fix it..
Click to expand...
Click to collapse
I watched the disassembly video when I replaced the housing of my HD2, and you have to take it apart pretty much completley to reach the buttons.
The risk of damaging something is pretty high, isn't it?
mekkelrichards said:
Has anyone else had this problem and successfully fixed it?
Click to expand...
Click to collapse
You got your HD2 used? I would guess it's a sign of wear.
I'm experiencing the same problem, not most of the time, but sometimes.
Since I'm on Android I started using Button Savior some time ago, hopping I can preserve my buttons a little longer. Don't know if there's a similar app for WP7.
...but sooner or later it'll be time for a new device.
Yeah, you will have to buy new tape or use CA glue to seat the lcd/digitizer assembly back onto the chassis when you put it back together. The risk of damaging isn't that high if you be careful to not touch the button contacts (they will fall off but it can be fixed with tiny drops of super glue) and careful not to rip any flex cables.

[Q] Strange screen Problem HD2

Hi guys, first post. So heres the problem. My HD2 screen is not glued properly to the base of the phone and it has a little space between them at the bottom right corner ( next to the Power button), whenever i press the screen to close the gap the phone freezes, and i have to remove the batery. It is getting really annoying couse i cant even put the damn thing in my pocket without it freezing. The hardware keys dont even work i just have to restart it. So my question is does any1 know of this problem and can he/she offer a way out?
Sorry for my english. thanks in advance
Sounds like it been opened before & had not the best assembly.
Would imagine hardware button ribbon is torn or pulled out of socket hence no buttons.
freezing issue could be down to issue with digitizer ribbon or button ribbon or worse ?
Do you have any issues with screen touch & do you know full history of the handset.
If black Void sticker is missing from case screw near battery pins then you know it been opened & most repairs including so called specialists are poor from ones I've seen.
I know this is the last thing you want to hear but if it were my device I'd take it apart and redo the assembly myself. Theres plenty of how-to videos with detailed steps. Hope this helps.
Sent from my SGH-T889 using xda app-developers app

Categories

Resources