Hi,
I saw there are several topics on bricked tab's but mine seems to have a different problem: It wont switch on, when I connect it to my pc it wont switch on and doesnt do anything. And finally when I connect it to my charger the following screen goes on and off: (attachment). I also cant get it in download mode to restore it with Odin. Can somebody help?
Thanks in advance.
rozza21 said:
Hi,
I saw there are several topics on bricked tab's but mine seems to have a different problem: It wont switch on, when I connect it to my pc it wont switch on and doesnt do anything. And finally when I connect it to my charger the following screen goes on and off: (attachment). I also cant get it in download mode to restore it with Odin. Can somebody help?
Thanks in advance.
Click to expand...
Click to collapse
flash with PIT file only, and it will work again!
The above post assumes your pc is recognizing the tab at all. Charge it to full (overnight if you can) on a wall charger, then attempt to plug it in via usb to your pc. If it recognizes it, attempt the pit flash (without download mode obviously)
It also helps to know how this happened...
Sent from my "way better than an iPad" tab.
btyork said:
The above post assumes your pc is recognizing the tab at all. Charge it to full (overnight if you can) on a wall charger, then attempt to plug it in via usb to your pc. If it recognizes it, attempt the pit flash (without download mode obviously)
It also helps to know how this happened...
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
the above post is mine....is just an example "how to" my tab is not connected to computer ....and I agree with you = no need to go in download mode. just flash as it is!
ovigt71 said:
the above post is mine....is just an example "how to" my tab is not connected to computer ....and I agree with you = no need to go in download mode. just flash as it is!
Click to expand...
Click to collapse
I flashed a wrong rom and it failed in odin. I'l try the recharge. Thanks.
recharged the whole night, still not going on or showing a yellow box in odin. What do I do?
It worked! Thankyou so much all.
Related
so i tried to update my phone to EC05 thru odin with the sydicaterom 1.1 (i was on 1.0.2) so i downloaded the modem and the odin package on this website for it and when i tried to flash it (was in download mode on my phone) it went stright to fail in odin and then my phone reset and now when i turn on my phone or plug it into the computer or wall charger it comes up with a little picture of a phone and then 2 dots and then a ! and then a little computer . and when i try to hold the power,cam,volume down buttons it does the same the only thing i can do on my phone is enter download mode thru power and holding 1 what can i do i am stuck. when i plug my phone into the computer so odin can read it nothing happens even when i put it in download mode my 2 computers wont read my phone
icebear8 said:
so i tried to update my phone to EC05 thru odin with the sydicaterom 1.1 (i was on 1.0.2) so i downloaded the modem and the odin package on this website for it and when i tried to flash it (was in download mode on my phone) it went stright to fail in odin and then my phone reset and now when i turn on my phone or plug it into the computer or wall charger it comes up with a little picture of a phone and then 2 dots and then a ! and then a little computer . and when i try to hold the power,cam,volume down buttons it does the same the only thing i can do on my phone is enter download mode thru power and holding 1 what can i do i am stuck. when i plug my phone into the computer so odin can read it nothing happens even when i put it in download mode my 2 computers wont read my phone
Click to expand...
Click to collapse
Your phone is probably not bricked if you can enter download mode.
Have you tried a different cable??? Also, for now - just to see if your phone is in bad shape, I would try to download a stock DI18 or something. Maybe the ROM image you have is corrupted.
tryin to find a different cable right now my kids went and hid my usb cable for my phone and using my gfs phone usb (which is a LG) but until then this is all i got lol but yea i did try different roms and the DI18 and EB which i was on and odin wont even get my phone to pop up
icebear8 said:
tryin to find a different cable right now my kids went and hid my usb cable for my phone and using my gfs phone usb (which is a LG) but until then this is all i got lol but yea i did try different roms and the DI18 and EB which i was on and odin wont even get my phone to pop up
Click to expand...
Click to collapse
Why would you odin in the first place when we have the flashable.zips... Much easier. Just go back into download mode and reodin and you should be just fine.
i found the right cable but odin still wont find my phone =/. thats the problem is that odin wont do anything because it wont see my phone in download mode i DID get into CWM and tried reinstalling my roms and stuff but when it gets done installing whatever i want to install it restarts and goes to the whole phone and computer icon
Look through the general section in this forum and go to the how to video thread. It will show you how to properly use odin. There is also a video showing you how to update to ec05. Id post the link but I'm on my phone.
Sent from my SPH-D700 using XDA App
icebear8 said:
i found the right cable but odin still wont find my phone =/. thats the problem is that odin wont do anything because it wont see my phone in download mode i DID get into CWM and tried reinstalling my roms and stuff but when it gets done installing whatever i want to install it restarts and goes to the whole phone and computer icon
Click to expand...
Click to collapse
This happened to me and I had to pull my battery and start up in download mode again. Try that.
did what that guide said to do i put in download mode and plug my cable in and still no go it will not connect to computer nothing comes up in odin. i tried takin battery out and sd card and putting them back in and no go (also did with out battery in the phone)
I thought my phone was bricked it was stuck, I had pulled the battery out several times and nothing, so I left the battery out for a couple of hours and when I put the battery back in it started working, not sure why just happy it did, word to the wise sprint wont work on the phone unless you have everything back to stock, I tried before leaving the battery out, before I got to sprint the phone wouldnt do anything let it off over night to take to sprint to try and get a new one I figured since it wont boot at all they will never know, but as luck would have it when I got to sprint after giving up on the phone and leaving it off over night, the sprint rep turns it on and it goes straight to clock work :0, its worth a try
Did you install the samsung drivers?? Did you try different micro usb cables?
Sent from my SPH-D700 using XDA App
tried different cables, different computers, different drivers, still nothing
Good news: As long as you can enter Download mode on your phone, it should not be bricked
Bad news: there are many reasons a computer would not see a phone in download mode
1) wrong/bad drivers
2) bad cable
3) bad/flakey USB port on computer
4) bad/flakey usb port on phone
my tip: With the phone in download mode, instead of trying to use ODIN, download the EB13 SWUpdate exe and try using that. It will wipe the phone just like ODIN, but is a lot less tempermental, and almost foolproof compaired to ODIN, and will retore the phone to stock EB13, at which point the EC05 update can be copied to the SD Card and then run to update to EC05
Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.
usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate
its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]
thanks for all you that respond to mt post :good:
thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
flash stock rom using odin
Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:
walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode
lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah
walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery
marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.
walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there
install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app
Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:
Hey guys so I decided today to have fun with my S4 (i9500 variant). But I am encountering a weird problem in here.
I am able to connect my phone when it's booted can copy, adb, everything, but the story changes when I put the phone in Download Mode, no sound (default windows device connect sound) is played on my PC and Odin doesn't detect my phone but as soon as I connect my USB cable (while in Download mode) and remove my battery Odin shows "Added!!!" as soon as I put the battery in it shows "Removed!!!" and the phone disconnects!
I got the battery idea from this video: http://www.youtube.com/watch?v=YO7TVY2UXEY
Video exactly depicts the scenario I am going through but when the guy re-inserts his battery his phone isn't disconnected while mine is.
Yes, I have uninstalled and reinstalled Kies, downloaded drivers separately and installed them everything is perfect from that view.
Bump, any ideas?
5pace said:
Bump, any ideas?
Click to expand...
Click to collapse
Maybe u are doing bad process:
1. Put ur phone in DOWNLOAD MODE without touch the battery.
2. Open ODIN (latest version as possible).
3. Conect ur phone to ur pc.
4. Voilá.
Joku1981 said:
Maybe u are doing bad process:
1. Put ur phone in DOWNLOAD MODE without touch the battery.
2. Open ODIN (latest version as possible).
3. Conect ur phone to ur pc.
4. Voilá.
Click to expand...
Click to collapse
I know already did that. :/
5pace said:
I know already did that. :/
Click to expand...
Click to collapse
Are ya using the original USB conector?
Joku1981 said:
Are ya using the original USB conector?
Click to expand...
Click to collapse
Yes sir.
Did you try a different pc? I would try that to rule out the pc factor.
Lennyz1988 said:
Did you try a different pc? I would try that to rule out the pc factor.
Click to expand...
Click to collapse
I didn't I'll try on my laptop later, to be honest I don't think PC would a problem ad it works perfectly wheb the phone is booted, also my PC would be impliedly ruled out since it's a powerhouse and everything's perfect from that view.
I think it would be driver or cable problem.
So, i just got an s10+ exynos from a friend, the screen is ok and the back too, the problem is that the phone is weird asf
i'm trying to put it in download mode for like 2 days
so, the phone show the samsung s10+ logo if i plug it on a outlet
BUT if i plug the phone on my pc usb, the screen just goes black and vibrate every 5 seconds or 10 idk
can anyone help me?
ps : i flashed the phone one time, and it failed (device info) in odin, and now if i sucess to boot it in download mode, the phone is not detected by odin
please someone can help me
Goldmnkey said:
So, i just got an s10+ exynos from a friend, the screen is ok and the back too, the problem is that the phone is weird asf
i'm trying to put it in download mode for like 2 days
so, the phone show the samsung s10+ logo if i plug it on a outlet
BUT if i plug the phone on my pc usb, the screen just goes black and vibrate every 5 seconds or 10 idk
can anyone help me?
ps : i flashed the phone one time, and it failed (device info) in odin, and now if i sucess to boot it in download mode, the phone is not detected by odin
please someone can help me
Click to expand...
Click to collapse
ok, so you can or can not reliably get the screen to show download mode?
i can't even go in download mode sadly
Goldmnkey said:
i can't even go in download mode sadly
Click to expand...
Click to collapse
is the battery dead as a doornail?
the battery don't look like it's dead because when i plug the phone it vibrates like a bootloop, but black screen |ONLY ON USB| BUT if i plug it on a outlet the samsung screen show up but bootloop and if i unplug it the screen goes off and nothing happen
Goldmnkey said:
the battery don't look like it's dead because when i plug the phone it vibrates like a bootloop, but black screen |ONLY ON USB| BUT if i plug it on a outlet the samsung screen show up but bootloop and if i unplug it the screen goes off and nothing happen
Click to expand...
Click to collapse
update : i can boot into download mode if it's plugged on a outlet, but i still can't if usb, anyone can help me pleasee
Goldmnkey said:
update : i can boot into download mode if it's plugged on a outlet, but i still can't if usb, anyone can help me pleasee
Click to expand...
Click to collapse
Try another cable and/or usb port.
Try accessing using Windows Drive Management if not already.
Check Windows Event Viewer for error messages.
blackhawk said:
Try another cable and/or usb port.
Try accessing using Windows Drive Management if not already.
Check Windows Event Viewer for error messages.
Click to expand...
Click to collapse
UPDATE :
ok, now i can enter download mode, but the phone is not detected by odin, it's detected by the pc but not odin.
already tried to re-install kies, samsung usb drivers and smart switch nothing works, can someone help me ? i broke my main phone and i need this one
Goldmnkey said:
UPDATE :
ok, now i can enter download mode, but the phone is not detected by odin, it's detected by the pc but not odin.
already tried to re-install kies, samsung usb drivers and smart switch nothing works, can someone help me ? i broke my main phone and i need this one
Click to expand...
Click to collapse
I never used Odin.
-Reboot- always reboot...
Try again.
Try another (all) USB port(s).
Check Event Viewer for error messages.