my phone is bricked i think - Epic 4G General

so i tried to update my phone to EC05 thru odin with the sydicaterom 1.1 (i was on 1.0.2) so i downloaded the modem and the odin package on this website for it and when i tried to flash it (was in download mode on my phone) it went stright to fail in odin and then my phone reset and now when i turn on my phone or plug it into the computer or wall charger it comes up with a little picture of a phone and then 2 dots and then a ! and then a little computer . and when i try to hold the power,cam,volume down buttons it does the same the only thing i can do on my phone is enter download mode thru power and holding 1 what can i do i am stuck. when i plug my phone into the computer so odin can read it nothing happens even when i put it in download mode my 2 computers wont read my phone

icebear8 said:
so i tried to update my phone to EC05 thru odin with the sydicaterom 1.1 (i was on 1.0.2) so i downloaded the modem and the odin package on this website for it and when i tried to flash it (was in download mode on my phone) it went stright to fail in odin and then my phone reset and now when i turn on my phone or plug it into the computer or wall charger it comes up with a little picture of a phone and then 2 dots and then a ! and then a little computer . and when i try to hold the power,cam,volume down buttons it does the same the only thing i can do on my phone is enter download mode thru power and holding 1 what can i do i am stuck. when i plug my phone into the computer so odin can read it nothing happens even when i put it in download mode my 2 computers wont read my phone
Click to expand...
Click to collapse
Your phone is probably not bricked if you can enter download mode.
Have you tried a different cable??? Also, for now - just to see if your phone is in bad shape, I would try to download a stock DI18 or something. Maybe the ROM image you have is corrupted.

tryin to find a different cable right now my kids went and hid my usb cable for my phone and using my gfs phone usb (which is a LG) but until then this is all i got lol but yea i did try different roms and the DI18 and EB which i was on and odin wont even get my phone to pop up

icebear8 said:
tryin to find a different cable right now my kids went and hid my usb cable for my phone and using my gfs phone usb (which is a LG) but until then this is all i got lol but yea i did try different roms and the DI18 and EB which i was on and odin wont even get my phone to pop up
Click to expand...
Click to collapse
Why would you odin in the first place when we have the flashable.zips... Much easier. Just go back into download mode and reodin and you should be just fine.

i found the right cable but odin still wont find my phone =/. thats the problem is that odin wont do anything because it wont see my phone in download mode i DID get into CWM and tried reinstalling my roms and stuff but when it gets done installing whatever i want to install it restarts and goes to the whole phone and computer icon

Look through the general section in this forum and go to the how to video thread. It will show you how to properly use odin. There is also a video showing you how to update to ec05. Id post the link but I'm on my phone.
Sent from my SPH-D700 using XDA App

icebear8 said:
i found the right cable but odin still wont find my phone =/. thats the problem is that odin wont do anything because it wont see my phone in download mode i DID get into CWM and tried reinstalling my roms and stuff but when it gets done installing whatever i want to install it restarts and goes to the whole phone and computer icon
Click to expand...
Click to collapse
This happened to me and I had to pull my battery and start up in download mode again. Try that.

did what that guide said to do i put in download mode and plug my cable in and still no go it will not connect to computer nothing comes up in odin. i tried takin battery out and sd card and putting them back in and no go (also did with out battery in the phone)

I thought my phone was bricked it was stuck, I had pulled the battery out several times and nothing, so I left the battery out for a couple of hours and when I put the battery back in it started working, not sure why just happy it did, word to the wise sprint wont work on the phone unless you have everything back to stock, I tried before leaving the battery out, before I got to sprint the phone wouldnt do anything let it off over night to take to sprint to try and get a new one I figured since it wont boot at all they will never know, but as luck would have it when I got to sprint after giving up on the phone and leaving it off over night, the sprint rep turns it on and it goes straight to clock work :0, its worth a try

Did you install the samsung drivers?? Did you try different micro usb cables?
Sent from my SPH-D700 using XDA App

tried different cables, different computers, different drivers, still nothing

Good news: As long as you can enter Download mode on your phone, it should not be bricked
Bad news: there are many reasons a computer would not see a phone in download mode
1) wrong/bad drivers
2) bad cable
3) bad/flakey USB port on computer
4) bad/flakey usb port on phone
my tip: With the phone in download mode, instead of trying to use ODIN, download the EB13 SWUpdate exe and try using that. It will wipe the phone just like ODIN, but is a lot less tempermental, and almost foolproof compaired to ODIN, and will retore the phone to stock EB13, at which point the EC05 update can be copied to the SD Card and then run to update to EC05

Related

Soft Bricked Help!

Trying to fix a friends Vibrant...
He was running jk6 software when the phone bricked itself in his pocket (?).
Now, the only thing we can do is access download mode by holding down the power button.
If I run Odin, and try to start up the phone into download mode, none of the COM Ports detect the phone, even though he is in download mode. Conventional methods don't work (Starting up ODIN, Plug in USB, hold down volume buttons). Only way I access download mode is by holding the power button down.
Any Help?
Try switching to a different USB port.
Sent from my SGH-T959 using XDA App
Dimitri_010 said:
Trying to fix a friends Vibrant...
He was running jk6 software when the phone bricked itself in his pocket (?).
Now, the only thing we can do is access download mode by holding down the power button.
If I run Odin, and try to start up the phone into download mode, none of the COM Ports detect the phone, even though he is in download mode. Conventional methods don't work (Starting up ODIN, Plug in USB, hold down volume buttons). Only way I access download mode is by holding the power button down.
Any Help?
Click to expand...
Click to collapse
You need to make sure the computer has the usb drivers installed. Simple plug and play won't work. Its good you can get into download mode. Look in the bible sticky and download and install the usb drivers. Also if its windows vista or 7, when you open odin don't double click it. Right click and run as administrator. Also, make sure you open odin first before you connect the phone to the computer. Good luck.
Sent from my SGH-T959 using XDA App
Drivers have already been installed.
I can access download mode perfectly using my Vibrant and ODIN recognizes it, but when i plug my friends Vibrant in, thats when the problems happen.
For the record, when I plug my friends Vibrant into the USB port..a message pops up saying that one of the usb devices attached has malfunctioned (Code 43). I'm thinking this is directly related to ODIN not recognizing it (although it recognizes mine)
If you can reach download mode fear not its not an issue with the phone its definitely a problem with the drivers or maybe even try a different usb cable.
Yea, but I can only reach download mode. Phone will not boot into recovery, or even start up, just download mode lol. And i dont think its the USB, seeing as how i can plug in my other Vibrant and odin detects it immediately (on the same computer).
Dimitri_010 said:
Yea, but I can only reach download mode. Phone will not boot into recovery, or even start up, just download mode lol. And i dont think its the USB, seeing as how i can plug in my other Vibrant and odin detects it immediately (on the same computer).
Click to expand...
Click to collapse
Well if the very same usb cable and port recognizes your phone (I'm assuming you both have the same exact phones) and odin recognizes your phone and not his, then his usb port on his phone must be where the problem lies... Try looking it, or even opening your phone and cleaning his usb port or something. Or try a different computer. if you can get into download mode don't worry, you'll find a way to fix your phone.
Still having the same problems. Tried a different USB cable, different computer running Odin...no luck. Only my computer detects that the phone even exists by shooting me an error saying that the device has malfunctioned. Phone just stays in download mode...Odin doesnt detect it. I've tried different methods to have ODIN detect it and still nothing.
Had to go through this too, but didn't have another phone in download mode to test against.
Win7 x64, tried a bunch of different drivers, but in the end was running the ones that come with Samsung Kies. In my case it ended up working without the original samsung cable (just a generic one), and with a USB port hanging right off my motherboard at the back of my tower. I have two USB ports on the front of my tower and they always errored, no matter what combinations I tried (including the same cable and driver). But when I switched to a port at the back, I got past the malfunctioning USB device error. Also, it seemed like Odin likes to be running when the phone boots into download mode. This took hours but phone runs perfectly now.

ODIN COM port problem

I've tried every way possible of getting ODIN to give me a yellow COM box with no positive results.
Followed instructions to the T everytime. Tried all 4 different USB ports on my desktop, Ive tried three different versions of ODIN, v1.0, v1.3, and v1.7.
What am I trying to do in ODIN you might ask? Flash my phone back to stock. I had AXURA 2.2.7.1 and wanted to go back to 2.1 eClair. ODIN stopped mid-flash to stock, so I went to sleep and left it alone, Woke up with the same situation. Pulled cord, pulled battery. Now I get the "Phone ! Computer" sign.
Really need to recover my phone as fast as possible, as it is the only phone I have (No landline either!)
Why am I not getting a COM port #?
Open up Odin .
Then plug the cable into the PC only .
Then pull the battery from the phone and wait about 5 seconds .
Now hold both volume buttons and put the battery back in (dont let go) .
Still holding the both volume buttons now plug in the usb cable to the phone .
You should now be in download mode and Odin should see the phone .
If not try using a different usb port preferably one directly off the motherboard .
Also try right clicking MY COMPUTER then selecting MANAGE then click Device MANAGER to see if it being recognized .
Followed your instructions twice, nothing. Checked device manager and I dont see anything indicating the phone is being recognized.
It's a driver issue. You need to use the Samsung Mobile driver rather than the SGH-t959_Vibrant_USB_Drivers driver. There was a thread or even multiple threads containing both drivers. The Kies Mini contains the Samsung Mobile driver. Do a search or something and you'll find them. There are multiple ways you can do this. If you want, you can try uninstalling whatever driver you have now. Uninstall Kies Mini if you have it installed and still not recognized. Reboot and reinstall Kies Mini. reboot and do you Odin thing. GL
Have you installed the drivers .
If not download and install the drivers found here .
http://forum.xda-developers.com/showthread.php?t=728929
Its fixed. Apparently the drivers I downloaded on my desktop were wrong, or something. Went upstairs and grabbed my mom's laptop that I was using last night when this problem happened, and it went right through. Thanks all!

[Q] Desperate Need of Help

Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Did you restart the computer at all?
usb debugging enabled?
i have trouble connecting sometimes and it's always solved by restarting the phone.
Basementboyz24 said:
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Click to expand...
Click to collapse
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
megabiteg said:
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Click to expand...
Click to collapse
Did everything up till 5, and that did not work because the computer would still not recognize the phone. What now?
squshy 7 said:
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Im Using Vista and No Drivers were there.... And I guess I may be at the last resort point. Full details?
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
I had issues with mine taking the update (and issues with it beforehand) and getting it recognized on two different computer, multiple times, it seems completely random whether or not it would work sometimes.
thepervster said:
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
Click to expand...
Click to collapse
Any confirmation on whether or not this is safe and will work???
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
thepervster said:
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
Click to expand...
Click to collapse
I dont see how this is going to help me since I am not on stock....
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
thepervster said:
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Click to expand...
Click to collapse
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Basementboyz24 said:
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Click to expand...
Click to collapse
Hate to ask, but did you follow the instructions EXACTLY as the SW Updater tool says? Pull battery (next) - Download mode (next) - plug into PC (next) - Pull battery (again) (next).
One of the steps the tool does has to do with installing drivers... you mentioned Vista, but is it 32 or 64 bit? Have you tried a different PC?
Whosdaman said:
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
Click to expand...
Click to collapse
I have the exact issue with my phone. I can only connect to my computer using the back usb ports (off the motherboard). I'm on windows 7. If you haven't, give that a shot. Even try uninstalling the drivers, connecting to the back usb ports and see what it does.
Saw someone post about Odin only working when they flipped the phone face down - thought it had something to do with the accelerometer. I suspect that in that case it might just be a bad connection and flipping the phone over made the contacts work. Worth trying though it you are desperate.

Help please... Can't boot or get pc to see phone

Problem:
my darn phone won't boot unless I use same battery. I can't get my laptop to recognize phone even in boot loader mode. The only way I can boot phone is to battery pull or plug it in. I'm stuck. Can't odin without pc seeing it, wives phone works great same pc same cable same batteries. Can't shut it off as plugging it in reboots it.... Can't do usb storage....
Tried:
1) I installed several roms after clearing everything, factory reset, and nothing works. I even reinstalled clockwork. Please help.... 2) my wived phone works with my pc and other batteries.
3) wives phone on same rom
4) I have same issue from stock rom or my current rom clean gb even without any personal apps or changes
Please help.
Sent from my SPH-D700 using XDA App
Try putting it into download without a battery. Have Odin ready, plug in usb cable without battery in then put it into download mode. Odin in EC05 stock tar, then root and flash after that.
Sent from my SPH-D700 using XDA App
Dang..... Nope..... Pc doesnt reconize.....i had fingers crossed.. Hummm.. ItS like phone is stuck in some sort of boot mode....
Awhile back i deleted the boot animation and shutdown animation files... I wonder if that did something. Since then clean gb rom has installed new animations files which work..
Sent from my SPH-D700 using XDA App
Not to sound dumb, but are you using the same cord as your wife to try and make transfers? I have a computer in my living room, with 2 different USB Cords that my wife and I use for charging in the evenings. One of them connects to the computer properly, the other is unreliable for data and wont ever recognize a phone attached to it. Figured I'd ask so you can rule that out.
Also if the USB port is plugged into a hub, or front of the PC, try moving it to a USB port in the back of your PC that is directly attached to the motherboard. Also make sure there is nothing inside your phone USB slot. I have had some crap get in there (hence the slider on top I NEVER close when I unplug it, ) and it wouldn't connect to PC either.
These are both obvious solutions but we might as well try and start there. Let me know. I'd say uninstall/reinstall the drivers on the computer also, but if one phone works, and the other doesn't so it's not the drivers.
I had a similiar problem where my GF's phone connected fine with USB debugging on but my phone wouldn't. Tried goin back to stock...everything. Finally just put USB debugging on, plugged my phone in, went to Device Manager and where it said Samsung Android, I hit update drivers from Windows Update. Took like 20 minutes but everything worked fine after that.
I am using same chord and port as I did with my wives phone. Good question. I cleaned the contacts in the usb port still nothing. I had usb debugging on... Just tried it with it off nothing.... I really think I may have garbage data or something messing it up. When I installed ask these roms over the last year I only cleared data like once every 10-20 rom loads our when the rom did it itself. I've never had any issues til now.
Sent from my SPH-D700 using XDA App
Did you reinstall all 5 drivers and then try to Odin back to stock with battery out?
I have reinstalled all the drivers and used my wifes phone to compete installs as it wouldn't recognize mine. once we figure this out I will certainly odin to stock and start clean!
Sent from my SPH-D700 using XDA App
Dumb question.... is your wives phone the same phone as yours? ..... try going to the samsung website. Navigate to your phone and you can grab the drivers from there....
That's how I got mine.
Sent from my Cyanogen Epic.
troyolson92 said:
I have reinstalled all the drivers and used my wifes phone to compete installs as it wouldn't recognize mine. once we figure this out I will certainly odin to stock and start clean!
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If it comes up as unknown device then you'll need to go into the device manager and unistall the software for it. Then advance install the drivers for the unknown device it should then recognise the phone and install the Samsung usb composite device, gadget serial control, and the Samsung mobile Modem. Hope this helps
Sent from my OG Epic
Try these drivers may make a difference its for win 32 bit
Thank you and every one for your help! I will try to install the driver file you attached. I do appreciate your help.
wife has same phone exact same setup as mine. What keeps driving me crazy its her works fine, mine is unknown device. I will try to install drivers again as suggested.... I'll report back in the morning,.thank you!
Sent from my SPH-D700 using XDA App
Yeah seems like wth its the same phone ^^. But make sure you open the zip and get the drivers out. Let me know if that works I've seen this problem with certain computers it has something to do with itunes sometimes I'm sure you have itunes and if you don't then its windows sometimes needs to be reinstalled.
Sent from my OG Epic
Samsung Galaxy S2 Stuck in ODIN Mode
I too have a similar issue.
My Sprint Samsung Galaxy S2 fails to connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
ODIN MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
Any ideas?
Perhaps you can ask in the correct Epic Touch thread instead of the Epic with the keyboard thread. More likely someone there will be able to help you.
Sent from my SAMSUNG-SGH-I717 using xda premium

[Q] Help... MJA ->MK2 cannot

So I got my phone a month ago. Just rooted and kept stock ROM.
Now keeping getting prompt to install MK2... So finally got around to looking at it today.
I downloaded the stockish ROM, but it says I need to be on MK2 before I flash. So Im trying to install MK2 via the instructions here.
I have ODIN and the file, but I cannot get my phone to be recognized on either computer I have when I open ODIN. I've tried to update the drivers, etc and nothing. All it does when I plug in my phone is charge. I dont see the option to change the MTP either.
Just need some help. Im not a newb, but im stuck and have spent a couple hours trying to figure out where to go.
supdawg said:
So I got my phone a month ago. Just rooted and kept stock ROM.
Now keeping getting prompt to install MK2... So finally got around to looking at it today.
I downloaded the stockish ROM, but it says I need to be on MK2 before I flash. So Im trying to install MK2 via the instructions here.
I have ODIN and the file, but I cannot get my phone to be recognized on either computer I have when I open ODIN. I've tried to update the drivers, etc and nothing. All it does when I plug in my phone is charge. I dont see the option to change the MTP either.
Just need some help. Im not a newb, but im stuck and have spent a couple hours trying to figure out where to go.
Click to expand...
Click to collapse
You have to put your phone in download mode to use odin. Power off your phone, then while holding down volume press and hold power until it boots into the download mode menu. Select volume up to enter download mode. Now connect your phone to the computer and odin should recognize it.
cruise350 said:
You have to put your phone in download mode to use odin. Power off your phone, then while holding down volume press and hold power until it boots into the download mode menu. Select volume up to enter download mode. Now connect your phone to the computer and odin should recognize it.
Click to expand...
Click to collapse
Thanks... But I've tried this. And while I am in download mode, when I open up ODIN, it screen never goes green. So I know it doesnt recognize the phone. I've tried to close and reopen the app and unplug and replug the phone, which usually solves this issue to no avail. Its like it doesn't recognize the phone at all... Which I used the same computer to root the phone in the first place, so totally weird to me.
Make sure that you are using the latest version of Odin (3.09?) and running it as an administrator. If you have Kies installed, uninstall it. If all that fails, uninstall and reinstall the Samsung drivers. Should fix the problem.
And you are just trying install the MK2 modem correct?
Sent from my SPH-L720 using Tapatalk
Get a new USB cable if all else fails I have had 4 stock Samsung cables ( the white one's ) go bad just FYI..
Was the USB cable!

Categories

Resources