Trying to fix a friends Vibrant...
He was running jk6 software when the phone bricked itself in his pocket (?).
Now, the only thing we can do is access download mode by holding down the power button.
If I run Odin, and try to start up the phone into download mode, none of the COM Ports detect the phone, even though he is in download mode. Conventional methods don't work (Starting up ODIN, Plug in USB, hold down volume buttons). Only way I access download mode is by holding the power button down.
Any Help?
Try switching to a different USB port.
Sent from my SGH-T959 using XDA App
Dimitri_010 said:
Trying to fix a friends Vibrant...
He was running jk6 software when the phone bricked itself in his pocket (?).
Now, the only thing we can do is access download mode by holding down the power button.
If I run Odin, and try to start up the phone into download mode, none of the COM Ports detect the phone, even though he is in download mode. Conventional methods don't work (Starting up ODIN, Plug in USB, hold down volume buttons). Only way I access download mode is by holding the power button down.
Any Help?
Click to expand...
Click to collapse
You need to make sure the computer has the usb drivers installed. Simple plug and play won't work. Its good you can get into download mode. Look in the bible sticky and download and install the usb drivers. Also if its windows vista or 7, when you open odin don't double click it. Right click and run as administrator. Also, make sure you open odin first before you connect the phone to the computer. Good luck.
Sent from my SGH-T959 using XDA App
Drivers have already been installed.
I can access download mode perfectly using my Vibrant and ODIN recognizes it, but when i plug my friends Vibrant in, thats when the problems happen.
For the record, when I plug my friends Vibrant into the USB port..a message pops up saying that one of the usb devices attached has malfunctioned (Code 43). I'm thinking this is directly related to ODIN not recognizing it (although it recognizes mine)
If you can reach download mode fear not its not an issue with the phone its definitely a problem with the drivers or maybe even try a different usb cable.
Yea, but I can only reach download mode. Phone will not boot into recovery, or even start up, just download mode lol. And i dont think its the USB, seeing as how i can plug in my other Vibrant and odin detects it immediately (on the same computer).
Dimitri_010 said:
Yea, but I can only reach download mode. Phone will not boot into recovery, or even start up, just download mode lol. And i dont think its the USB, seeing as how i can plug in my other Vibrant and odin detects it immediately (on the same computer).
Click to expand...
Click to collapse
Well if the very same usb cable and port recognizes your phone (I'm assuming you both have the same exact phones) and odin recognizes your phone and not his, then his usb port on his phone must be where the problem lies... Try looking it, or even opening your phone and cleaning his usb port or something. Or try a different computer. if you can get into download mode don't worry, you'll find a way to fix your phone.
Still having the same problems. Tried a different USB cable, different computer running Odin...no luck. Only my computer detects that the phone even exists by shooting me an error saying that the device has malfunctioned. Phone just stays in download mode...Odin doesnt detect it. I've tried different methods to have ODIN detect it and still nothing.
Had to go through this too, but didn't have another phone in download mode to test against.
Win7 x64, tried a bunch of different drivers, but in the end was running the ones that come with Samsung Kies. In my case it ended up working without the original samsung cable (just a generic one), and with a USB port hanging right off my motherboard at the back of my tower. I have two USB ports on the front of my tower and they always errored, no matter what combinations I tried (including the same cable and driver). But when I switched to a port at the back, I got past the malfunctioning USB device error. Also, it seemed like Odin likes to be running when the phone boots into download mode. This took hours but phone runs perfectly now.
Related
I've tried every way possible of getting ODIN to give me a yellow COM box with no positive results.
Followed instructions to the T everytime. Tried all 4 different USB ports on my desktop, Ive tried three different versions of ODIN, v1.0, v1.3, and v1.7.
What am I trying to do in ODIN you might ask? Flash my phone back to stock. I had AXURA 2.2.7.1 and wanted to go back to 2.1 eClair. ODIN stopped mid-flash to stock, so I went to sleep and left it alone, Woke up with the same situation. Pulled cord, pulled battery. Now I get the "Phone ! Computer" sign.
Really need to recover my phone as fast as possible, as it is the only phone I have (No landline either!)
Why am I not getting a COM port #?
Open up Odin .
Then plug the cable into the PC only .
Then pull the battery from the phone and wait about 5 seconds .
Now hold both volume buttons and put the battery back in (dont let go) .
Still holding the both volume buttons now plug in the usb cable to the phone .
You should now be in download mode and Odin should see the phone .
If not try using a different usb port preferably one directly off the motherboard .
Also try right clicking MY COMPUTER then selecting MANAGE then click Device MANAGER to see if it being recognized .
Followed your instructions twice, nothing. Checked device manager and I dont see anything indicating the phone is being recognized.
It's a driver issue. You need to use the Samsung Mobile driver rather than the SGH-t959_Vibrant_USB_Drivers driver. There was a thread or even multiple threads containing both drivers. The Kies Mini contains the Samsung Mobile driver. Do a search or something and you'll find them. There are multiple ways you can do this. If you want, you can try uninstalling whatever driver you have now. Uninstall Kies Mini if you have it installed and still not recognized. Reboot and reinstall Kies Mini. reboot and do you Odin thing. GL
Have you installed the drivers .
If not download and install the drivers found here .
http://forum.xda-developers.com/showthread.php?t=728929
Its fixed. Apparently the drivers I downloaded on my desktop were wrong, or something. Went upstairs and grabbed my mom's laptop that I was using last night when this problem happened, and it went right through. Thanks all!
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Did you restart the computer at all?
usb debugging enabled?
i have trouble connecting sometimes and it's always solved by restarting the phone.
Basementboyz24 said:
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Click to expand...
Click to collapse
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
megabiteg said:
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Click to expand...
Click to collapse
Did everything up till 5, and that did not work because the computer would still not recognize the phone. What now?
squshy 7 said:
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Im Using Vista and No Drivers were there.... And I guess I may be at the last resort point. Full details?
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
I had issues with mine taking the update (and issues with it beforehand) and getting it recognized on two different computer, multiple times, it seems completely random whether or not it would work sometimes.
thepervster said:
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
Click to expand...
Click to collapse
Any confirmation on whether or not this is safe and will work???
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
thepervster said:
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
Click to expand...
Click to collapse
I dont see how this is going to help me since I am not on stock....
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
thepervster said:
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Click to expand...
Click to collapse
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Basementboyz24 said:
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Click to expand...
Click to collapse
Hate to ask, but did you follow the instructions EXACTLY as the SW Updater tool says? Pull battery (next) - Download mode (next) - plug into PC (next) - Pull battery (again) (next).
One of the steps the tool does has to do with installing drivers... you mentioned Vista, but is it 32 or 64 bit? Have you tried a different PC?
Whosdaman said:
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
Click to expand...
Click to collapse
I have the exact issue with my phone. I can only connect to my computer using the back usb ports (off the motherboard). I'm on windows 7. If you haven't, give that a shot. Even try uninstalling the drivers, connecting to the back usb ports and see what it does.
Saw someone post about Odin only working when they flipped the phone face down - thought it had something to do with the accelerometer. I suspect that in that case it might just be a bad connection and flipping the phone over made the contacts work. Worth trying though it you are desperate.
My phone is running DL30 based Blackhole 4.01 with the DL09 modem. When I try to plug my phone into a computer, the phone detects the computer, but the computer does not detect the phone.
- The phone starts charging
- The phone says "USB Debugging Connected"
- The computer does nothing
- adb devices lists no devices
- same thing in download mode, the computer doesn't see the phone
I have tried on OS X and booted into Windows XP.
I have no idea how to handle this. The one thing I tried was installing the Stock/rooted DL30 rom instead of Blackhole, but that didn't seem to fix and I went back.
To make matters worse, assuming that everything in ROM Manager is basically safe, I accidentally installed orange clockwork today and I cannot figure out how to get back to a working clockwork. The All ClockworkMod Recoveries option in ROM Manager does nothing - they all say download error.
Wow. If anybody can help with any of this, that would be great. Thanks everyone.
Did you install the proper samsung drivers onto the computer.
Edit: Also did you try to Odin, the title indicates no odin, but your explanation doesnt say so. (Open Odin, remove battery, hold down volume and insert usb cable)
what do you mean "onto my phone?" My Windows system has samsung drivers and OS X were both previously able to connect, use odin, etc. I don't know when it stopped working.
Yeah, odin doesn't work because the computer never detects that the phone is attached.
BatsShadow said:
what do you mean "onto my phone?" My Windows system has samsung drivers and OS X were both previously able to connect, use odin, etc. I don't know when it stopped working.
Click to expand...
Click to collapse
Sorry, meant computer.
What do you mean odin stopped working, your explanation doesnt say anything about odin as my edit in above post.
What I mean is that I used odin to install DL09. After that, I don't recall every attaching to my computer, but when I tried recently to install EB01, it no longer works. Sometime after flashing DL09, my phone is no longer detected by computer.
Im saying does odin detect the phone, not the computer.
You can odin the updated CWM (non orange) from here:
http://forum.xda-developers.com/showthread.php?t=942021
no, odin does not see the phone.
Have you put your phone in debugging mode
Sent from my SCH-I500 using XDA App
Read the first posy pleaseeee...
okubricko said:
Have you put your phone in debugging mode
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
Are you sure Odin doesn't work?
Check USB settings on your phone. My rom gives me media player mode and mass storage mode. Don't have my cable with me to test if media player mode stays hidden from the pc.
wynalazca said:
Are you sure Odin doesn't work?
Check USB settings on your phone. My rom gives me media player mode and mass storage mode. Don't have my cable with me to test if media player mode stays hidden from the pc.
Click to expand...
Click to collapse
Odin uses download mode with phone off.. What would this matter?
Sent from my Rocking dj05, themed superdark w/o swype mod, voodoo 5, with custom boot and shutdown.. With premium xda app.
I was IRL with OP trying to solve this a few days ago. It's not that improper/no drivers are installed, the computer literally does not detect that there is a device connected to that USB port. lsusb on Linux turns up just the controllers and root hubs, and devmgmt.msc on XP does not show anything attached at all, even after a manual hardware scan. adb shows absolutely nothing. My Captivate does show up on all the same scans, regardless of the USB mode (Kies/mass storage/media player/what have you.)
He has tried this on multiple computers, so individual ports/USB controllers/drivers/OS bugaboos have been effectively ruled out.
My thought is that between your last flash, OP, and now, your physical microUSB port on the phone is damaged. If you no can haz insurance, I'd say you're SOL.
FYI: The phone does not say "debugging connected" when plugged into the wall. I think the my USB connector is damaged or something. I may consider seeing if I can get it repaired, or I may just wait until I can get a different phone that's better supported by manufacturer (and therefore by the mod community)
Okay im running windows xp, and i have all those drivers installed...
http://www.userdrivers.com/PDA-Mobil...dows-XP-Vista/
and http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
so what am i missing to get my vibrant to be recognised by odin in download mode????
What are you running currently?
simply honey 3.6..... gingerbread
By chance did you forget to enable usb debugging?
idk, i flashed from a 2.2.1 rom to simply honey 3.6 through rom manager, but i did have it enabled through before i flashed for sure.... And usb debugging is not required for download mode as (i think) thats a whole different thing???
It needs to be enabled to use Odin. Also, sometimes for Odin to see my phone I have to unplug my phone and open Odin a few times before I finally get Odin to see my phone. It's very finicky for me, always has been
Sent from my SGH-T959 using XDA Premium App
helikido said:
Okay im running windows xp, and i have all those drivers installed...
http://www.userdrivers.com/PDA-Mobil...dows-XP-Vista/
and http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
so what am i missing to get my vibrant to be recognised by odin in download mode????
Click to expand...
Click to collapse
Go into windows device manager. Make sure that your computer is even seeing the device and that it has recognized the drivers for it. If it recognizes it, try rebooting computer then restart the process. Also make sure your phone is actually in DOWNLOAD mode. Not Recovery mode.
If you do not know the difference between the two, let us now and we'll assist further.
Happy hacking!
I use to always have trouble with Odin..then one day someone mentioned they always right clicked on Odin and chose "run as Administrator", I have never done that because I figured I was the administrator....but once I did it, never had a problem since.
Another problem I run into (well not anymore) is the USB port I plugged into. If I was on a hub or something it wouldn't work. If I plug right into my computer it works properly.
I also use adb commands to get into download and recovery when I'm Odin'ing. It also let's me know if my phone is detected by the OS.
#adb devices (should show your phone listed)
#adb reboot download (reboots your phone into download mode)
#adb reboot recovery (reboots your phone into recovery mode)
You'll need the SDK installed for adb to work.
Since I started doing these things, I have had ZERO problems with Odin and flashing my phone.
ay.. usb debuging was enabled before i flashed... now if my turn turns on it goee onto a bootloop... so everytime i cinnect my phone to the computer it says device not recognised. ohh and one thing to mention is that my computer doesnt have a highspeed usb port
Three button to download mode - power+vol up+vol down and see if you can get it into download mode then plug in usb (1.0 should work), then run odin...
otherwise i think you're looking at trying to make one of those jigs or replacing your phone...
try
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Afaik the three button combo is for
Recovery mode. Follow the above directions up to the power button part. While holding both volume buttons, it should go directly into download mode when the usb us plugged in
Try removing all drivers then reinstall if xp doesn't pick it up
Beware of angry gingerbread man
power off phone
pull out battery
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
Enjoy and also make sure u have the proper samsung drivers
Install samsung kies mini. It gives you the correct drivers. I once installed those and it messed it up. So install kies mini.
adamcooks said:
Afaik the three button combo is for
Recovery mode. Follow the above directions up to the power button part. While holding both volume buttons, it should go directly into download mode when the usb us plugged in
Try removing all drivers then reinstall if xp doesn't pick it up
Beware of angry gingerbread man
Click to expand...
Click to collapse
This is what happens when you do it a certain way for a long time, you forget certain things...lol
try another computer?
goodluck
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
IAmTechFreq said:
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
Click to expand...
Click to collapse
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Yoinx said:
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Well you see man , I cant change anything in Device Manager since my phone isn't being detected. It didn't install drivers fully fully since my phone isnt recognized. Even in TWRP or "Download Mode/ Firmware Update" Nothing happens no drivers installing or anything even but it does boot it up to that point....and its just normal boot up i see the LG logo and my led goes from green to blueish in a smooth transition and it doesnt stop until i turn it off. The method i got into recovery is holding all those buttons down its not a problem for me to get into it. I also have another problem it doesn't seem to want to mount my usb otg by samsung.
what do i do
So i tried the otg route but I can't mount it. I have everything connected and once I go into recovery to mount usb-otg, nothing happens.
I just need some way to get a ROM.zip in my phone
Computer does not recognize my phone.
Stuck at LG logo unless I enter recovery.
Sideload doesnt work.
OTG doesnt work.
I've tried at least 4 different guides with no luck.
Why don't you manually install drivers from online?
ive tried
tzzeri said:
Why don't you manually install drivers from online?
Click to expand...
Click to collapse
ive tried that already and it doesnt list anything from the LG folder.
I realized the phone will say start the adb sideload feature. so, when i put the "abd sideload file.zip" command on my pc i just wait a few minutes and it says daemon not running on port 5037 and then start successfuly and then error :device not found.
it can seem to reognize my device wether its in recovery, or download mode or fastboot mode.
Try again in other pc that has never been conected to an LG Phone before. It can perfectly be a conflict with drivers installed in the OS.
I've tried man
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
IAmTechFreq said:
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
Click to expand...
Click to collapse
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
tzzeri said:
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
Click to expand...
Click to collapse
No there is no problem with your USB cord or port. You need to do following steps.
http://forum.xda-developers.com/showthread.php?t=2432476
https://www.youtube.com/watch?feature=youtu.be&v=g01Pa7cgdSM&app=desktop
Please let me know if you succeed.
All credit goes to #bender_007