Hi to all,
I bought for work my Xperia x8 in Norway, with a Telenor Norway SIM. Now I will go to work in Ireland, but I always use this phone. I got the Network unlock code, but unfortunately I cannot enter the code because when I insert it I get the message:
"Network unlock request unsuccessful"
After I checked the service menu under SIM lock, I got :
[x] Network 0
[] Network subset 10
[] Service provider 10
[] Corporate 10
[] SIM 0
How do I reset the NCK counter?
Any updates? Able to reset? What if you update OTA? What if you use PC Companion to update the phone?
poincare01 said:
Hi to all,
I bought for work my Xperia x8 in Norway, with a Telenor Norway SIM. Now I will go to work in Ireland, but I always use this phone. I got the Network unlock code, but unfortunately I cannot enter the code because when I insert it I get the message:
"Network unlock request unsuccessful"
After I checked the service menu under SIM lock, I got :
[x] Network 0
[] Network subset 10
[] Service provider 10
[] Corporate 10
[] SIM 0
How do I reset the NCK counter?
Click to expand...
Click to collapse
You can get your x8 unlocked for €15 here in Ireland
Related
I've just hard resetted my hd, I've installaed network wizard but when I lauch it the filed country and operator remain blank...I can't choise and I can't configure...why? what can I do?
I today receiver my T-mobile G2 from USA, i obtained an unlocking code for sim card lock and the phone opens now. But it cannon search for networks and i cannot register to any network. When i put the enclosed sim card of T-mobile it searches and finds all greek networks. But with my card all i get is error... I also noticed that when i configure a new apn the MCC and MNC codes arent filled automatically as they should be. Even when i manually entered them (MCC 202 and MNC 05 for GR Cosmote) and saved it, i could not found it on the list. So i think the problem is it cannot read properly the MCC MNC codes from sim card
Update
After entering the unlocking code when i tried the tmo card it also cannot find any nettworks. When i go to hboot and choose simlock i get error message:
FAT32 init ok
Open MCCMNC file fail
Open CID file fail
I buy from ebay this phone (say unlocked)
I put my ENTEL gsm chip (1900mhz) and get:
network error
only emergency services available
I try one Telefonica gsm chip
same error
I make hard spl, and change the rom WhiteStone_WM6.5_D3C5.U4_Build 23569
and I get same error
don't have unlock gsm setting, have inside settings-security only :-encryption -certificates -phone lock -factory reset
I select gsm/umts only
gsm network selection manual & select entel(gsm) y says en registering on the network...
and current network stay in: searching...
os version: 5.2.23569
rom v: 3.04.605.D3C5.U4C WWE
radio: 2.25.00WVL
what's wrong???
well
I change the rom to energy
and now I have the sim security icon, and ask for the unlock code
I buy from http://www.htcunlocknow.com the most cheaper $13.5
I'm waiting the code
the ebay seler will get bad points
problem solved
Urgent matter. I bought a huawei P10 lite from another person, I performed a hard reset and when I finished I can't get any signal on my device. It reads no service or emergency calls only. I tried everything on the net but nothing. The code *#*#4636#*#* doesn't work. The code that does work is *#*#6130#*#* but it's not very helpful. Can anyone help me to turn the radio on. Which code are for this process. Please send me solutions because it's urgent because I can't use my device.
Most likely, the phone is Locked to some mobile carrier.
Unfortunately there is no free way to unlock it!!!
About 3 weeks ago I had the same problems with P8Lite.
Paid solution:
- Go to https://www.dc-unlocker.com/buy and buy 3 credits (3 Euro) and create new account
- After a successful payment on your email you will receive Username and Password (check the Spam folder)
- Download HCU Client - https://hcu-client.com/download/
- Login with your Username and Password
- Put your P10Lite in the Manufacture mode
- Type this: *#*#2846579#*#*
- Go to ProjectMenu -> Background settings -> USB ports settings -> Manufacture mode
- Then connect the phone to PC via USB cable
- Press Read Phone Info
- Go to tap Unlock and press Direct SIM Unlock
- Finally, on the right side you should see Unlock done and the phone will turn off
- Turn on your phone and it will be unlocked.
Tested and works on P8 Lite, HCU cliend support P10 Lite and you can unlock it.
I think that it isn't locked because I tried with 3 different sim cards each in different mobile network.
I am still waiting for solutions. Thank you.
Some problem with IMEI or OEMinfo maybe ?.. try flash new FW
Still the same problem. Does anyone knows the shortcut to engineer mode? The new code because I found on the net some old codes but they didn't work.
There is no engeneering mode in P10 lite.
But as I said, I'm almost sure that phone is locked. Ask the previous owner what SIM card (mobile carrier / country) was used.
There is one other menu that is ProjectMenu
Insert you SIM card and check you SIM Lock status:
*#*#2846579#*#*
ProjectMenu -> Network Information Query -> SIM Lock Info
If you get "SIMLOCK_DEACTIVATE" then all it's okay and your phone isn't locked. But that means you probably have other big problems!
Can your phone has physically malfunction? Sim slots problem?
Also why you didn't test the phone before buying it?
Have you thought about mobile repair service?
Still the same problem
I installed a new software using update option and I get signal for five minutes but I wasn't able to use it because it didn't connect to network, then the no service and emergency calls only appear, oscillating between sim cards. The sim cards used are in different mobile service.
If I install Oreo the problem could disappear?
If so can anyone send me the link that I can download and install using update.app method?
If not could you suggest me a different solution.
Now shows that it's charging but the percentage of the battery drops.
Could be the same software problem?
Hello,
How do I pass my Huawei P10 Lite from WAS-L01AC02(locked by vodafone) to WAS-L01AC432(Global Europe Version)?
Thanks
This may helps... if you just wants to rebrand the phone and unlock 2nd SIM slot: https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-lx1c432-successfully-t3737383
But if your SIM slot is locked to Vodafone there is no free way to unlock the SIM slots. In this case you need HCU Client and 3 credits (3 euro) to unlock the slots!
The easiest way to buy credits is by PayPal directly from DC-unlocker: https://www.dc-unlocker.com/buy
HCU Client: https://hcu-client.com/
SIM Unlock tutorial: http://hcu-client.com/huawei-mtk-phone-sim-unlock/
You need to enter into Manufacture Mode: *#*#2846579#*#*
Project menu -> Background settings -> USB Ports -> Manufacture Mode
Then run HCU Client, log in to your Account, connect the phone, go to tab Unlock, press Direct SIM Unlock.
Aalesund said:
This may helps... if you just wants to rebrand the phone and unlock 2nd SIM slot: https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-lx1c432-successfully-t3737383
But if your SIM slot is locked to Vodafone there is no free way to unlock the SIM slots. In this case you need HCU Client and 3 credits (3 euro) to unlock the slots!
The easiest way to buy credits is by PayPal directly fronm DC-unlocker: https://www.dc-unlocker.com/buy
HCU Client: https://hcu-client.com/
SIM Unlock tutorial: http://hcu-client.com/huawei-mtk-phone-sim-unlock/
You need to enter into Manufacture Mode: *#*#2846579#*#*
Project menu -> Background settings -> USB Ports -> Manufacture Mode
Then run HCU Client, log in to your Account, connect the phone, go to tab Unlock, press Direct SIM Unlock.
Click to expand...
Click to collapse
I had a Huawei p8 lite and i downloaded a rom(i think its was a stock rom) from a video from YouTube ( channel Huawei device). And after that my model number was BalongC432. (I did all that for free). And Also i unlocked the 2nd sim card wirh that rom C432.
I think it could happen that um My p10 lite Also.
Are you sure that theee are a free way to do this for free?
Thanks anyway.
I want to Turn my was-Lx1ac02 to was-lx1ac432 because i want android 8.0 beta in my phone
https://forum.xda-developers.com/p10-lite/help/want-to-install-android-8-huawei-p10-t3789618