I've just hard resetted my hd, I've installaed network wizard but when I lauch it the filed country and operator remain blank...I can't choise and I can't configure...why? what can I do?
Related
HI everyone,
I have a HTC tytn with the last rom and bootloader 1.09 (I had the portuguese rom with bootloader 1.04). The problem I'm having has also in the portuguese rom .. I try to connect to a wireless connection that is wep /open with a PEAP certificate! I can successful connect, put my user and password then about 20seg my connection friezes and only a soft reset and restore the wireless connection again!!!!!!!!
I have the certificate installed, I have connection/internet in that 20seg then I don't know how just friezes up!
Can anyone help me with this problem?
Thanks all for all support
I want also to report , my friend has also a HTC tytn with the portuguese rom.. same problem!!!!!
I have a spv m700 (operator orange romania) with wm5 . After i update soft (OS 5.2.1948)(Build 18548.0.7.2) i have some problem with wap acces and internet acces. This operator run at the firs boot aome tasks (disable vlans... etc..).
I want to copy a full image from his operator and unpack it to see what is inside this tasks. Which soft can I use cu copy full image (dump i think that is the name...) from a new mobile and unpack ?
Thanks
sv M700
I have an orange spv M700 in UK and i connect to the internet via GPRS and G3. Maybe you don't have G3 in Romania. I would check your internet connections in System in Settings. If this does not work I suggest you call Orange customer services in Romania on 150.
helpdesk from romania doesn't know about their stucture.
I admit that i'm novice in wm6, but i'm expert in w2k3, so i know something about SO and lan...
I ask operator to give me the .cab(s) and .tsk from orange ... but they doesn't knows about what's happened when a new phone with orange software is conected or default reset....
Internet is working in H, so is ok, but wap doesn't work... so, when i see on their task on another phone ... disable vlan 14 ... and some other...
Can i extract a rom image and unpack with some software? That's the solution, i think
I seek other 9502 ultimate owners and experts advice on the below:
Upon trying to connect to the internet using the GPRS functionality, I always receive the following error message:
“Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufacturer’s documentation and try again”
I have tried the following steps:
- Reviewed the connection settings picked up by the Imate configurator upon first boot, they were correct.
- Tried to remove the SIM card and use it on my JAMin, the device connected smoothly (with the above same connection settings).
- Hard reseted the device, still it didn’t connect.
- Checked the Operator settings of my provider on the internet, they are the same ones loaded by the Imate Configurator
- Tried another SIM card, same thing
- Went to the service provider and changed the SIM card and got a new one, same error
I shall appreciate any assistance.
UPDATE
Finally!!!!
After installing the new WM 6.1, the device connected smoothly
.
From a 9502 owner
Hi, I have read your post and looked at my Ultimate to find anything obvious and I cannot. I am on O2 in the UK and used the configurator settings which worked fine. If there are any settngs you would like me to verify for you, let me know.
Oh! did you check the phone settings as well as the network connection settings, it's possible that a default in there does not tally with your provider (Goto the Wireless Manager and Tap MENU|PHONE SETTINGS).
Cheers
Eden
GPRS - Ultimate 9502
Thx for your reply.
I have tried every possible combination of Network / Band selection from the phone settings but it didn't work.
Imate have responded that it may be a ROM issue and that they are working on an new updated ROM to be available soon that will probably solve the problem.
Meanwhile i am trying to figure out some registery tweak that could fix the problem (trial and error)
WM 6.1 Link please
Can you please post the link to the WM 6.1 ROM that resolved your problem.
Thanks
iMate 9502 WM 6.1 ROM
http://forum.xda-developers.com/showthread.php?t=407336&referrerid=676710
I live in Switzerland and I bought HTC Shift from US.
I'm trying to connect in SnapVUE via 3g SIM but I always get "the answering modem has disconnected".
Can perhaps help i00 rom ? (http://forum.xda-developers.com/showthread.php?t=480525&highlight=sim+lock)
Any help ?
Thanks.
Most probably you need to enter the correct GPRS/UMTS username/pass in your connection settings.
You could also do a "clear snapvue" and have the automatic settings take effect.
Find your APN username and password for your GPRS telco and enter it in connection settings, You might even need to create a new 3G connection first.
Flash i00 ROM anyway, it will greatly enhance your shift.
Hi lucid,
I don't have GPRS/UMTS username/pass.
The SIM I'm using works well without user/pass on a Tytn II so I don't think they are required, aren't they?
When you say "Clear SnapVUE" do you mean to reset it using HTC official tool?
Because I already did it.
When I try to set up conection I do the following (read on HTCmanual):
Snapvue --> Settings --> Connection setup --> select country and carrier --> autoconfigure --> restart
After that I try to connect but get the same errors.
Thanks for help; I have to make it works.
i have a spv c500 from orange uk to unlock i install active sync4.5 and conect fone to pc it was conected and build partnership but wen i run in fone HTCUnlock-CVS den device didnt explored and give some problem to explore den i delete partnership from pc and tried but fail to explore.but wen i next day i conected the fone to pc it didnt made any partnership and gives the following error
wat should i do for this any idea?
same problem
any one can solve it
waiting
i had the same problem but found these guides to help me.
http://shadowork.net/soubor/2005/09/20/activesync.via.bluetooth.pdf to help set up the active sync
and http://spod.cx/blog/unlocking_orange_spv_c500.shtml to unlock the phone.
mine was on orange uk and now is working fine on o2UK
hope this helps and thanks to those who wrote the guides
Just says "Action cancelled"
I need a T-Mobile backup phone and tried to unlock my Orange C500 with this software.
I just get a screen saying "Action cancelled".
Is the software no longer functional?
I turned of my Firewall (M$ & Peerguardian) and I was linked to Activesync.
Can anyone help?
I just dealt with a similar problem unlocking an unbranded smt5600 for AT&T
I was having all sorts of active sync issues - which likely are a result of either:
a) device's activesync client not initializing
fix) Hard reset your device - this will reinstall a fresh version of the local activesync client. At very least this will require you to set up a fresh partnership
b) device is having USB problems
fix) if you are running wm5+, make sure to go to start>settings>connections> USB to PC (or whatever it's called) and uncheck the "Enable advanced network functionality" box
c) might be a host problem...
fix) any number of things. You've already started on the right path by disabling the firewall. I've read about many problems from people trying this on Vista machines.
Hope you figure it out!
Still no luck but trying.
Thank you for the help.
I even tried entering the IP address into IE still with no luck
I will try it on someone else machine.
I have a UK Orange SPV C500, running
Windosw Mobile 2003 v4.21.1088(Build 14217)
Radio Version 0
Operator: 4.1.1.4
Manufacturer: 1.1.1.91
Microsoft: 4.21.14217.0
No idea how to hard reset or update to a newer version.
It worked
Okay, It worked.
I tried it again and it worked perfectly (with both firewalls on)
I can only assume the site was down the first few times I tried it.
I am now happily using my unlocked SPV C500
Once I get my new phone back I'll be interested in updating the firmware now.