Hello to all! I'm new to the forum, but I have read a lot of information here and really like it.
I have an HTC Touch Diamond II. I had to do a software reset. Now I don't have a Quick GPS, that's why I downloaded SeaSgee. It worked and downloaded the packedephemeris.ee, but now when I click on Download button, it shows me this error:
Error: Send error!
I think that the problem is in the phone options or in the firewall of the windows XP may be...
Please help me,
thank you!
Drakosha said:
Hello to all!
I think, I've finally found the reason why Chevron almost never works. After a few days of struggle, I managed to successfully unlock my HD2 three times in a row, all by the same trick.
The idea is to change the IP which Chevron emulates DURING the process of jailbreak. Here's step-by-step.
1 - Disable LAN card in your PC (Control Panel\Network and Internet\Network Connections\ right click on "Local Area Connection" and choose "disable"). It is very important to disable ALL connections, but you MUST remember which one is used for Internet access (see below, why).
2 - Do all the standard steps of unlock - install certificate, start WPConnect e.t.s. When Chevron fails to unlock - LEAVE IT OPEN.
3. Start Notepad and open hosts. Delete lines added by Chevron (at the bottom). Save. LEAVE NOTEPAD OPEN.
4. Press Win+R and enter IPConfig /flushdns , press "enter". CMD window will blink for a second - that's normal.
5. Press Win+R again (there will be IPConfig /flushdns typed already), but DO NOT PRESS "ENTER", just leave this window open.
6. Now the trick. Start WPConnect. WHILE it connects, continue to repeatedly press "Unlock" button in Chevron, until the black CMD window of WPconnect disappears. Chevron will fail to do its job, but that's in fact is the very thing we need.
7. Now, do not touch Chevron window, just return to Network Connections and ENABLE yor LAN card.
8. Go to Notepad and JUST CLICK "Save", do not alter anything inside.
9. Return to the window with the typed command IPConfig /flushdns . Press Enter.
10. Start WPConnect, WAIT until it disappears, and press "Unlock" button in Chevron. You're done - this time unlock would work.
At least, it worked for me 3 times in a row, while NO other ways worked.
Best regards - Draco.
P.S. If you have firewall - disable it before doing anything.
P.P.S. Win7 from NAND + MDJ Desire HD 4.4 from SD = best phone in the world
Click to expand...
Click to collapse
I have followed other guides posted here before, but none is as reliable as this one. Flawless. (Note that Zune is not required at all during this process, WPConnect is used)
Extra precautions :
1) Make sure port 443 is not used. You can open command prompt and type netstat -aon. From there, check which ip ends with 443 and check its PID number.
Once you have acquired the PID, go to command prompt and type tskill <PID number>.
2) Close skype.
3) Turn off your antivirus / firewall.
4) Make sure that during executing WPconnect.exe you're phone should NOT in be in sleep-mode/locked.
5) Make sure your host file located in C:\Windows\system32\drivers\etc\ is not read-only.
Credits to member Drakosha.
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
dissa said:
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
Click to expand...
Click to collapse
WPconnect is an executable used to connect your PC to wp7 devices without having to open ZUNE.
You can find out more about it here http://forum.xda-developers.com/showthread.php?p=10609273#post10609273
I test all solution, why not these one? I will reflash WP7 and test
Thanks for the TIP !
Ok.. now I know.. but the major problem is that I have Windows Xp.. so no chance to try tha trick... :-(
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
birel3107 said:
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
Click to expand...
Click to collapse
Can you read what is says in the window before it closes? Usually WPconnect just opens for 2-3 seconds and after a connection is established it will close back. If it says "Connection is established" or something like that, means you're good to go.
Read the steps carefully.
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
or this one!
yeah, that's just the same as I get when running WPConnect.
Yes but does it solve your problem?
I post 2 screenshot;
-Compltly close Zune
-Connect the device
Here's what i did, connect the phone to PC via USB, let zune opens and sync. Then close zune. Rune WPconnect.exe. It should say "Trying to establish a connection with blablabal" then "Connection established" and it will close. Try that.
G-ThGraf said:
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
Click to expand...
Click to collapse
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Niglet said:
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Click to expand...
Click to collapse
No it was for help birel !
Sent from my HTC HD2 using XDA App
I made it 3 times and it works !
BIG BIG Thanks!
G-ThGraf said:
I made it 3 times and it works !
BIG BIG Thanks!
Click to expand...
Click to collapse
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
I'm from Russia. sorry for my english. stll, not working for me, i'v done all steps, but can't unlock my hd2.
birel3107 said:
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
Click to expand...
Click to collapse
Hum, only (no lock--> set to never..)
I did, step by step what |OP| Posted !
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Improve said:
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
This is the one that i use on Windows Seven 64 bits Ultimate
AS ABOVE
i've followed the steps , dont say im a leecher cause i read through all.
host file checked - no window developer services
regedit.exe - edited the registry
installed zune
installed microsoft sdk
activation code - gotten
network adapters were disabled when trying the steps below
so how i go about doing this and it doesnt work
1 : connect phone and install cert
2 : start WPConnect.exe to establish a connection
3 : Start zune
4 : place unlocker at C:\
5: error messages pops out .
tried on my laptop and desktop all same problem.
PS , ive been doing all this for two days , researching every night till3am while i have school next day. i have no idea what i still need to do.
Try to restart the computer, maybe some IM software took the port 443
Thats what I did
any other help ?... i check for the port too already. i will try it now again
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
TheATHEiST said:
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
Click to expand...
Click to collapse
tried , no avail
lionhart1001987 said:
tried , no avail
Click to expand...
Click to collapse
thats it ? ... no help ?
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
Why are you quoting yourself??
Also people have tried to help you, Yu are obviously doing something wrong or there is something on your pc that is blocking your connection, try and read some guides and disable anything that could potentially be blocking it.
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
OK start up your mobile. Is the date and time correct (Very important) if all ok then start zune. open up the chevron on c/drive and see if it will connect with ot the Ohno message.
You may have to do this a few times. try the other computer as well.
Some guy's can get the chevron to work, by puting the date a few months forward NOT back.
If you do manage to get the chevron unlocked, then dont lock it.
Make sure to swith off spyware detectors, and put your antivirus into stand by mode until you complete this tasks.
and read this thread: http://forum.xda-developers.com/showthread.php?t=912218
Russ
EDIT: SOLVED ALL MY PROBLEMS THANKS AGAIN FOR HELPING
Hi
so im trying to install this Rom and it needed 400mb recovery
so i tried to install it but i cant get DFT installer to recognize my phone or something i get this common error:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
and i tried a lots of solutions but no change
then i wiped all data on my phone and my sd card... tryed again and the same thing!
tried task29 and the same error .. it seems that no installer is recognizing to my phone and now im without Rom .
pleeeaaaas help and i'll be really appreciated
try these
in win7/vista run application as administrator
in xp run as -> uncheck "protect my computer data..." or simpy run as administrator if you know your admin info
also if you are using active sync just make it so it doesnt allow usb connection (in active sync, file -> conn. settings -> there you will find it, just make sure its unchecked)
edit:
just remembered, before starting to flash dtf disable firewall and/or antivirus cause they can cause trouble as well
You have to disable USB connections in ActiveSync. Should work then.
shtabe said:
try these
in win7/vista run application as administrator
in xp run as -> uncheck "protect my computer data..." or simpy run as administrator if you know your admin info
also if you are using active sync just make it so it doesnt allow usb connection (in active sync, file -> conn. settings -> there you will find it, just make sure its unchecked)
edit:
just remembered, before starting to flash dtf disable firewall and/or antivirus cause they can cause trouble as well
Click to expand...
Click to collapse
I tried all of these earlier an it didn't work
then i tried it with the fire wall turned off it didn't work either.
can't i just reset my whole phone and install hspl and magldr again?
and thanks for helping anyway
make sure you have the correct drivers installed
I got the same error few nights ago, and it turned out to be the dft package. I dl 'd the 150meg cwm installer several times that night,same each time. But I had a copy of the 250meg one I'd downloaded 5days ago, edited the flash.cfg added the image file and it flashed first time.
Give this a try ..
http://forum.xda-developers.com/showthread.php?t=981811
It Should Help ..
thanks WarlockW that was very helping
but i tried to flash the 400mb revovery it gave me some kind of error
so now im installing the 350mb and then i'll install the rom and i hope it works..
but im reeaaally thankfull to u and everybody that tries to help .
EDIT:the error that i have when flashing 400 mb is
first some words and numbers then this written in red
PARSE CFG FAILD
AF FAILD 6!
what does this means?
can i fix it??
It's OKAY
i solved all my problem
i runed the installation from other pc and it worked
Thanks guys for helping
snipy said:
It's OKAY
i solved all my problem
i runed the installation from other pc and it worked
Thanks guys for helping
Click to expand...
Click to collapse
What version of windows were you using that didn't work, and what version were you using that did?
win7 didn't work.
then when i tried win vista it worked perfectly..
then i tried with another usb port on win7 and it worked.
so the OS wasn't the problem .
Hello, there all forum members.
I need some help right now. I flashed my Galaxy S6 edge+ to 2AOJ1 from OGG (I guess it was the version), whenever I try to sideload to U2APB2 I get error: protocol fault (no status) message, I tried changing file name to OTA.zip, even using it without changing name, with same results I'm using Windows 10, tried on XP SP3 and same thing happened... Do anyone have any ideas, or have had this problem before? Hope u can help to solve it, best regards.