Database Users

[Q] nand flash problem

Hi guys, when I start to flash, halfway, I get an error message. sorry for my bad english. i need a solution please. thanks
Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)

butxo said:
Hi guys, when I start to flash, halfway, I get an error message. sorry for my bad english. i need a solution please. thanks
Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
Click to expand...
Click to collapse
Try flashing Magdlr again. Then flash your ROM.

butxo said:
Hi guys, when I start to flash, halfway, I get an error message. sorry for my bad english. i need a solution please. thanks
Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
Click to expand...
Click to collapse
Did you start with a custom ROM or a stock ROM? I've heard some people say that starting the process with a stock ROM helps? Not sure why that would matter, but if flashing MAGLDR again doesn't work, try it.

Thanks, i'm using a custom rom with the last drivers ( BSB 7) and i just reinstalled magldr an the problem persist.

I suggested the following to a user this morning who had the same problem and he managed to install. I'm not sure which of the steps are all necessary but give it a try.
1. Turn off your pc Anti Virus.
2. Re-download your NAND rom zip file
3. Remove sd card
4. Run daf.exe as Administrator.

How hard is it to understand that "questions" get asked in the "Q&A" forum and general stuff gets discussed in the "general" forum.
This forum is for "development"

simply install winmo stock rom, and do everything again (installing magldr n rom), it'll work...

Thanks i reinstall all again and well done

Few pointers to several errors
Hi everyone, I did some reading and some trials and errors...
had 2 errors when flashing mdj's revolution nand with my xp-monster:
Error Description: USB init failed Info: .\RSPL\RSPL.cpp (723)
solution;
- untick usb-connections in active sync, then run install/daf/andr_install -.exe
then came the next misshap..
Error Description: send partition data failed Info: .\RSPL\RSPL.cpp (802)
Error Description: Info: .\RSPL\RSPL.cpp (545)
had this one with the other mdj's build also (rev. HD). several times (kept trying, cuz one came very close (progress bar I mean).
then read somewhere that taking out the SD Card might help..
solution;
- take out SD Card.
now I'm nursing my AD-Sense baby
hope this helps
grtz Jawroy

Jawroy99 said:
solution;
- take out SD Card.
Click to expand...
Click to collapse
I can confirm. This solves the problem.
Thank you very much

removing the sd-card does not help me ..
gives the 802 error
additionally on the screen it says
Flashing 0 partition...0 [219-240] M1 Block 0, Bad CRC!
please help...

i had 545 problem and nothing helped me until i perfomed task29.. its quicker then installing stock rom again sorry for bad engl

Had the same issue after flashing magldr 1.12 and wp7 rom ... flashing magldr 1.11 and it worked again. Had errors both with mdj's cyanogen 7 mod and vanilla gingerbread nexus nand. Running now mdj's

- i have tried flashing pretty much all nand roms.
Using windows 7 .....
- changed radio from 2.25 to 2.14
- changed over to dutty wm rom and then flash magldr.
- ran task 29.
- changed to stock spl 2.08 and then back to hardspl 3.
and i get the following on the daf installer
""Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description: partition CRC error.
Info: .\RSPL\RSPL.cpp (561)
"
and on magldr screen.
it creates the partition... and then throws error
Flashing 0 partition...0 [219-8A3] M1 Block 3, Bad CRC!
.have tried all possible combinations of Radio, WM ROM, Task29, MAGLDR.
even tried magldr 1.12 still same issue.
even removing sdcard does not help ( and running task 29)
clk1.1 did work to flash... but however it has issues as of now.. (wifi and random reboots)
Need help to Get MAGLDR working on my phone.... pls !!!!!

got that error too:
First i flashed MGLDR 1.12, then MDJ 2.6 NAND Rom
Got the error....
Reinstalled MAGLDR 1.12
Removed SD Card
Flashed Rom, and it worked!!!
On a Tmo HD2

ssamsonice said:
I can confirm. This solves the problem.
Thank you very much
Click to expand...
Click to collapse
I can confirm this also.

i am like the other two posters. tried removing card, flashing stock rom and still get that error message right at the end of the process. have tried on two different pcs

same problem
i have the same problem as the people in this thread and it started when i tried to flash windows phone 7. now i cant even flash an android rom to nand using magldr1.11. and yes i have tried task 29 and yes i have got the 2.15.5etc radio and yes i have hspl 2.08 and so far i have tried using a different usb port. everything i try lands me in the same place and i am getting desperate because i fear that i have bricked my hd2 not good for me! so any method that is different from the ones i have read from this thread and a few other threads then i would be happy to listen.
also i have noticed that all of the solutions to this problem are based on trying and trying again, this doesn't work for me cos i have tried about 30 times no exaggeration.
i appreciate any help.

chris1nielsen said:
i have the same problem as the people in this thread and it started when i tried to flash windows phone 7. now i cant even flash an android rom to nand using magldr1.11. and yes i have tried task 29 and yes i have got the 2.15.5etc radio and yes i have hspl 2.08 and so far i have tried using a different usb port. everything i try lands me in the same place and i am getting desperate because i fear that i have bricked my hd2 not good for me! so any method that is different from the ones i have read from this thread and a few other threads then i would be happy to listen.
also i have noticed that all of the solutions to this problem are based on trying and trying again, this doesn't work for me cos i have tried about 30 times no exaggeration.
i appreciate any help.
Click to expand...
Click to collapse
How far did you get with the WP7 install? The problem with WP7 is that it formats your sd card and it is not always recognised properly. Try formatting your sd card again.

using the usb flasher tool the progress bar goes nowhere but the partitions are created and the data is starting to transfer (nothing happens to the sd card i can always see it and access it after using an external reader). i get a bad crc error and i assume that crc means cyclic redundancy check so i guess the magldr is assuming that the partition is bad. however i can still use the partitions by flashing a custom winmo rom to nand so i am assuming that either magldr is not able to create the partitions properly. does magldr create the partitions on the sd card? if so then your answer of reformatting the sd card could be valid? ill have to try it. however i assume that winPhone 7 creates the partitions on the sd card so this trying will be in vain.
however i will try reformatting the sd card so i ask which format should i use, fat32 or ntfs
thanks for the help.
its probably worth noting that even trying to flash a rom without the sd card achieves the same errors with magldr1.11 and 1.12 while trying to flash an android rom.
so to use android now i am forced to use the old method of going through win mo to boot android with haret.

[Q] Help! is my magic bricked?

I tried to root my htc magic and install a custom ROM.
After rooting it successfully (I followed theunlockr.com one click method), I tried to install Cyanogenmod-5 For Dream/Magic V5.0.8. When i reset, it stuck at the logo screen.
I tried wipe & reset + flash again, it still stuck. (the sd card is inserted properly)
I also tried other ROMs (Cyanogenmod 6.1.0 and other custom ROMs on the theunlockr.com). It still stuck at the logo screen.
The worst thing is: I do not have a nandroid backup.
What can I do?
Please Help~! Thanks in advance!

There are like a 1000 thread like yours.... and WE ALWAYS ask for the same thing...
Can you try to guess what it is?
Try to read the first 3-5 pages of this sub-forum.

I'm not exactly sure what answer you are looking for, but I would be willing to bet that it's not ALL the fastboot info.
Okay, you got me. That IS what you want.

fossilwatch said:
I tried to root my htc magic and install a custom ROM.
After rooting it successfully (I followed theunlockr.com one click method), I tried to install Cyanogenmod-5 For Dream/Magic V5.0.8. When i reset, it stuck at the logo screen.
I tried wipe & reset + flash again, it still stuck. (the sd card is inserted properly)
I also tried other ROMs (Cyanogenmod 6.1.0 and other custom ROMs on the theunlockr.com). It still stuck at the logo screen.
The worst thing is: I do not have a nandroid backup.
What can I do?
Please Help~! Thanks in advance!
Click to expand...
Click to collapse
This thread is going to have a 24 hours lifespan starting now unless the OP can provide to us his/her fastboot information.
To get that you have to hold the volume down key while powering on your device. You should get a white screen with text.
Type out all of the text in your reply.
Also, while your at it, give us the links that you were following so we can verify that you were following the correct information.

Binary100100 said:
This thread is going to have a 24 hours lifespan starting now unless the OP can provide to us his/her fastboot information.
To get that you have to hold the volume down key while powering on your device. You should get a white screen with text.
Type out all of the text in your reply.
Also, while your at it, give us the links that you were following so we can verify that you were following the correct information.
Click to expand...
Click to collapse
Sorry i am a newbie in rooting so did not know what information i need to provide.
Fastboot info:
SAPPHIRE PVT 32A SHIP S-ON H
HBBOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
The rooting guide I followed: http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
For installation of custom ROM: http://forum.xda-developers.com/showthread.php?t=688262
Thank you!

Download these, put them on your SD card, then flash them from recovery in the same order:
Super Wipe
CM 6.1
Google Apps
EBI1 Port for 32A Devices
Pershoot's OC/UV Kernel
Let us know if this works.

DonJuan692006 said:
Download these, put them on your SD card, then flash them from recovery in the same order:
Super Wipe
CM 6.1
Google Apps
EBI1 Port for 32A Devices
Pershoot's OC/UV Kernel
Let us know if this works.
Click to expand...
Click to collapse
Thank you!
Super Wipe - Installed successfully
CM 6.1 - Installed successfully
Google Apps - Installed successfully
EBI1 Port for 32A Devices - Installed successfully
Pershoot's OC/UV Kernel - - Unsuccessful
Screen showed:
~~~~~~~~~~~~~~~~~
Installing from sdcard...
Finding update package…
Opening update package…
Verifying update package…
E: No signature (7 files)
E:Verification failed
Installation aborted.
~~~~~~~~~~~~~~~~~

Dunno why it failed. Did it boot after flashing the rest of them?

DonJuan692006 said:
Dunno why it failed. Did it boot after flashing the rest of them?
Click to expand...
Click to collapse
Sorry I do not get your question. You mean reset? No it did not reset after fail installation.
The one that failed is the last zip file to flash. The other zip files before this are all ok.

Just try to boot now... it should start :0)

mumilover said:
Just try to boot now... it should start :0)
Click to expand...
Click to collapse
OMG IT STARTS!!
But I cannot sign in my gmail account. Having the same problem as forum.cyanogenmod.com/topic/11867-cannot-sign-in-to-google-account/
Should I wipe data? or reflash gapps?

No... just skip all of that.. let the rom load... wait 10 min... then restart.. let it work for 10 min... now inside accounts, try to add google account.
You already did a complete wipe(the superwipe you did before). Gapps is only some applications. gapps = Google apps,, apps = applications.

I still cannot sign in gmail account after 4 hours. What could go wrong?

Problem solved! Sincere thanks to all of you for your kind help!
By the way, is it ok that I remove the zip files inside?

Yes you can delete the .zip files from your SD card but I would keep them saved somewhere on your computer in case your need to reflash later on. What did you do to fix your Google Account issue?

DonJuan692006 said:
Yes you can delete the .zip files from your SD card but I would keep them saved somewhere on your computer in case your need to reflash later on. What did you do to fix your Google Account issue?
Click to expand...
Click to collapse
I did not do anything. It just worked suddenly.
I have been using new ROM for 2 days. The data connection goes on and off. I cannot sign in to google account MOSTof the time and have no access to Market. It is very frustrating.
Does anyone know what's wrong?

Legend for swift cannot read sim card

Any suggestions please?

GSM doesn't work in legendforswift. Install the Swift-Sense ROM instead.

What rom is that i've never seen it before

how to install swift sense that shows me error .....please help

rajatbajpai0072 said:
how to install swift sense that shows me error .....please help
Click to expand...
Click to collapse
You need to downgrade your Clockwork Recovery to version 2.5.1.8. This will allow you to use the old-style Amend update.zip files.

i tried but shows me "symlink line 1 error" something like that...please help

redownload and format sd card via recovery i don't recommend you to flash this ... incomming calls are working but nothing else

[Q] MyTouch 4g Installation aborted message

Hey, I have a myTouch 4g that's Perm-Rooted and True S=Off, yet, I can't custom ROMs. I've followed the step provided by ELBdelorean's "How to Flash CyanogenMod 7 Nightlies on myTouch 4G" and the Unlockr's "How To: Load a Custom ROM on the T-Mobile MyTouch 4G / HTC Glacier" videos but had no success. I have tried flashing Iced Glacier, CM7, and MIUI; every time, I get message saying installation has been aborted! Any ideas? I'm very new to this, so I apologize if this is a dumb question.

There is a lot of details missing from your post.
What recovery version are you using?
What are you using to flash - Recovery or ROM Manager?
What is the exact error message, and when does it appear?

1. I am using version 3.0.2.4 of ClockworkMod.
2. I have tried using both Recovery and ROM Manager.
3. The exact error message is "Installation aborted"; it pops up while in Recovery about to seconds after I try to install the .zip ROM.
I hope that this is enough info. I followed the aforementioned videos to a T. The only things that are different between what I say and the video were my Recovery version and that the text was never green. Please see aforementioned videos if you are not sure what I mean. Thanks for taking time to read my post. Please let me know what you find out! : )

Are u checkin the md5sum? Are u dwnloadin the file file frm the comp or phone? Make sure u dnt extract the file,leave it as a zip & put it to the root of the sd card(not in any folder)..
Mytouch 4g-white
Permrooted s-off
Root Method-gfree
CWR-3.0.2.4
Rom-Royalginger v2.1

I have tried downloading them from my phone's browser, from the ROM Manger app; and I have also tried downloading them on my computers (Mac & PC) and then copying them to the root of my SD card, making sure that the files remained in .zip format. I am not sure what the md5sum is, so if you could explain, I will check it. I have searched everywhere for an answer to my problem, but have had no luck.
Mytouch 4g-Black
Perm-Rooted S-OFF
Root Method-gfree
CWR-3.0.2.4
Currently still running stock :'(

http://en.wikipedia.org/wiki/Md5sum
In the recovery, there's an option to copy recovery log to SD card. Could you post that log here? I hope it'll shed some light.

Hey, the "Others" folder where "move recovery.log to SD card" resides does not show up. I am not sure how else to find it. Sorry.

Hey, I think I solved the problem. For anyone else out there who has had the same problem as described above, I believe most of my problems had to do with free space with my internal phone memory! I don't know much at all about flashing ROMs, but I am now running CM7 after flashing, loading into boot-loop, rebooting, completing another wipe/factory reset, and rebooting again! Thanks for all the help guys; I would be lost without this forum : )

[Q] new HD2 owner with issues! Please help :)

I have a HD2 but the down button is not working.
It has magldr 1.3 installed and the phone is running CM7. The mod version is MDJ's CyanogenMod 7 (v2.6) A2SD+
I really want to install a more up to date rom,a miui rom would be my chosen way.
Ive tried going through the process for one such rom.
I get to the point of running DAF and I get the following error:-
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (359)
After this I tried selecting the AD recovery option I get this message in MAGLDR saying "No boot sources"
Ive no idea if cLK is even installed on the phone.
Any help with repairing the down button would be great. Ive seen new housings on ebay and one thread I read suggested this would replace the volume rocker. can anyone confirm this or a way of repairing it would be great.
Im not new to Android but I usually use clockwork mod on my other devices.
This HD2 Android experience is totally new!
I know that using clockwork mod I dont need a down button because I can go straight into recovery from rom manager. I have rom manager on the phone and have installed clockwork mod but what ever I do the phone just goes into MAGLDR.
Ive spent the best part of today trying to sort this out but all ive ended up with is a huge headache.
Any help would be really appreciated!

Welcome to the world of HD2
go to these steps:
- Run Task29 (will delete you phone storage complete (all data will be erase!)).
- Make sure you've got the right radio rom - but i think so
- install MAGLDR or CLK - i would prefer magldr for beginners
- flash Clockwork Mod Recovery
- flash your rom
if you need help with these steps, look in the forum after the HD2 Toolkit or even take a look with my tool (see signature) - its not up2date - but the steps and the tools which im using are )
i hope i can help ya a bit
edit:
oh your down button dont work - bad.. no down button no clockworkmod :/

Hi aagain, I'm glad you started a new thread.
I'd get a magldr user to confirm this before you try it but I think the 'no boot sources' error means cwm isn't present or corrupt. I know magldr users can flash cement via DAF but don't know if you have to do it from trial colour screen, if so your SOL. Try looking into flashing recovery via adb fastboot, I'm sorry I don't have time to research more for you, have a driving lesson in 10 min's
Sent from my HD2 using XDA App

Thanks for your reply.
I tried doing a task 29 wipe but the problem is I need a down button to get the phone in that mode.

Hmm ive never used adb fastboot but is it possible to do everything I need to do with this to get it working this way?

Update:-
I found a past post saying about AD recovery No sources found error and a fix was given where you used to HD2 tookit to do a MAGLDR Repartition.
I tried this and I can now access clockwork mod via MAGLDR.

Ok ive now been able to install the miui rom I wanted.
Many thanks for your help guys