Related
Hello again everyone, I recently purchased a used HTC hd2, it has android on it now with clockworkmod recovery app also, But I want to put CM7 on it, So I reboot....Hold down power....select number 8 for the recovery, and it says go go go......but does nothing, I have a slide 3g my touch as well, but I am not comfortable with this phone yet....2 questions....I want to install cm7....can someone link me the exact file I need?...I'll worry about diff roms and themes later.....AND...How do I get into recovery to flash this cm7 rom?...I have mgcldr 1.3 on the phone now, a 8 gig sd card...I want to install the apps to the sdcard as well.....I have searched all over the forums and google, but like I said, I am confused on this only cause it is so new to me, and a bit different than mt3g......Help?...Thanks so much for reading.......Larry
find a good CM rom, and there you will find all instructions, usually it tells you how to.
but you can always reflash magldr and then go by ROM flashing instructions to reflash CWM recovery.
If choosing 'ad recovery' stops at 'go go go', i'd first try it a couple more times. I've had recovery fail a time or two the exact same way, only to work fine the next time I tried it.
If it just won't go into cwm recovery after trying a few times, re-flash cwm recovery with the appropriate system partition size for the rom you intend to flash. Do this by hooking your phone up to your pc by the usb cable and choosing 'usb flasher' in the magldr menu and then flash the recovery image. There is a thread to find your cwm recovery image in the 'hd2 android nand development' forum. Each nand rom thread usually says in the first post what size recovery image is preferred for that particular rom.
The hd2 may seem a bit confusing coming from a native android device, but compared to the mt3gslide, it's pretty straightforward, what with the slide's s-off procedure and the old rooting methods (I rooted back before rooting the slide was super easy lol). Once you can load up cwm, you'll feel right at home, it's just like flashing your old slide from that point on.
Sent from my HTC HD2 using XDA App
dirtylarry10 said:
Hello again everyone, I recently purchased a used HTC hd2, it has android on it now with clockworkmod recovery app also, But I want to put CM7 on it, So I reboot....Hold down power....select number 8 for the recovery, and it says go go go......but does nothing, I have a slide 3g my touch as well, but I am not comfortable with this phone yet....2 questions....I want to install cm7....can someone link me the exact file I need?...I'll worry about diff roms and themes later.....AND...How do I get into recovery to flash this cm7 rom?...I have mgcldr 1.3 on the phone now, a 8 gig sd card...I want to install the apps to the sdcard as well.....I have searched all over the forums and google, but like I said, I am confused on this only cause it is so new to me, and a bit different than mt3g......Help?...Thanks so much for reading.......Larry
Click to expand...
Click to collapse
Hey
You may have a older version of CWM on your HD2. Go to option #2 Boot AD SD and see if that boots CWM If that works you are good but I do recommend going to the CWM threadcand downloading the newer version of CWM, just check the thread on your ROM to see what partion size you need with CWM. If it does not work you might have to flash the newer version anyway as the oder version required you to place two files for CWM on your SD card. The new CWM just flashes to NAND memory like a ROM would. You can either click on the link to CWM in my sig to go to the thread on CWM or you can click on my guide I wrote on MAGLDR and CWM that I have linked in my sig also. I Really recommended you read my guidecas you said you are new to the HD2. It will tell you exactly how to flash both versions new and old of CWM and all kinds of stuff that will help you out. All you need to do when downloading anew ROM is make sure you get the ROM download that says for MAGLDR or has MAGLDR in the file download link in the ROM thread. The ROM download links are usually in the first or secound post of the ROM thread. There are several CM7 based ROMs in the HD2 Android NAND Development forum. Just look for the Cyanogen 7 or CM7 in the thread title. Here is a link to the forum.
http://forum.xda-developers.com/forumdisplay.php?f=928
Thanks guys....SO I have the nand rom for 250Mb..(opr whatever its called), I then push to sd card, after unzipping the file....I then hit option 4 on phone, and run daf.exe...but I get this error
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Now I googled that and found people saying go to control panel...then active sync, and disable usb etc....but...What control panel?....and..I dont have active sync either......layman terms?....lol thanks guys...getting close....Larry
dirtylarry10 said:
Thanks guys....SO I have the nand rom for 250Mb..(opr whatever its called), I then push to sd card, after unzipping the file....I then hit option 4 on phone, and run daf.exe...but I get this error
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Now I googled that and found people saying go to control panel...then active sync, and disable usb etc....but...What control panel?....and..I dont have active sync either......layman terms?....lol thanks guys...getting close....Larry
Click to expand...
Click to collapse
Are you talking about flashing Clockwork Mod Recovery or A ROM?
it is something...
LOOK FOR FLASHING INSTRUCTIONS INSIDE YOUR ROM THREAD
Got it....the hard way...lol I did some extensive reading 101, and realized i needed to flash roms a diff way because of nand....lol.....after I reinstalled mgcldr ....thanks guys......Now....to find some awesome nand roms that will help me save the damn battery life......what a hog this is, but I am loving it bigtime.....Dirty
I decided to change WM6.5 on my htc hd 2 phone, Flashed to 2.08 HSPL
and Radio to 2.15, Installed MAGLDR.
I wanted to install andriod rom image but using Dark Force installer, I have an error msg that is as follows can anybody help me.
SD Kernel open failed, appears in red colour, before eMAGLDR Menu
When Boot menu appears and I try and install andriod by Dark Force installer the following msg comes up.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I want to install andriod, but would be happy to revert to WM6.5 ,can anybody help. (it is wife's telephone and she is angry with me! you will save me)
Gary
It looks like you have to start all over from the beginning, try a youtube tutorial there are many out there and many of the more experienced techs on here actually post those videos. Good luck and make sure you follow it step by step. Also check out a thread by a moderator by the name of MSkip he posted on here directions on how to install a rom on your phone.. it's located in the HD2 section.
I think you've probably got everything right except for the actual ROM flash. There aren't too many Android NAND roms that you can flash the usual way (i.e the DAF like loaders you used for HSPL and magldr), but you can try flashing CWM and then a good NAND Android rom. Check out the Android NAND development forum for a suitable rom to flash, you'll most likely find the relevant instructions there. Or you can start over with YouTube tutorials to guide you (that's what I did). Best of luck.
Hey Guys,
at first, i hope this question isnt coming again and again, but i couldn't find anything helpful (for ME!) yet.
I have the HTC HD2 and got really tired of Windows Phone 6.5, so i changed it to Android. (Took me weeks to figure that out until it worked)
My current ROM:
Android 2.2 HTC Desire
Kernel 2.6.32.15 by cotulla
I use Magdlr and boot from NAND.
Superuser Elite is installed (bought it), but i cant update it - no matter what i do, it wont let me be root. I even tried the terminal, but when i type in "su" it directly says "permission denied". The problem is, my phone memory is low and i cant install apps directly on the sd-card (never found a guide how to get this automatically done).
What can i do??
i am rly desperate... the sad thing is, my boyfriend (yes, i am a girl) isnt much into smartphone stuff though he's got the new htc sensation - and also not into unix / linux systems - it seems all the guys i know besides only use an iPhone and google won't be my friend...
PLS PLS PLS HELP ME!
oh and sry for the bad language, grammar etc - i'm german ;-)
that is an old, out of date rom. It was the first proof of concept release when cotulla created magldr, so i would advise you to move to a different more recent rom. (We now have roms running android 2.3, 3 and even some early android 4 roms.)
There are very very few roms that flash in quite the same way, now, so you would need to learn about flashing CWM(clockwork, clockworkmod, clockwork recovery, it has several names)
Go get the 'android toolkit' from the android nand section, and then go read some of the guides from HERE
Mialeelay said:
Hey Guys,
at first, i hope this question isnt coming again and again, but i couldn't find anything helpful (for ME!) yet.
I have the HTC HD2 and got really tired of Windows Phone 6.5, so i changed it to Android. (Took me weeks to figure that out until it worked)
My current ROM:
Android 2.2 HTC Desire
Kernel 2.6.32.15 by cotulla
I use Magdlr and boot from NAND.
Superuser Elite is installed (bought it), but i cant update it - no matter what i do, it wont let me be root. I even tried the terminal, but when i type in "su" it directly says "permission denied". The problem is, my phone memory is low and i cant install apps directly on the sd-card (never found a guide how to get this automatically done).
What can i do??
i am rly desperate... the sad thing is, my boyfriend (yes, i am a girl) isnt much into smartphone stuff though he's got the new htc sensation - and also not into unix / linux systems - it seems all the guys i know besides only use an iPhone and google won't be my friend...
PLS PLS PLS HELP ME!
oh and sry for the bad language, grammar etc - i'm german ;-)
Click to expand...
Click to collapse
does it have app2sd built in the rom?
does the rom need sd-ext?
are you using tmobile or eu hd2?
MORE U EXPLAIN,MORE HELP U GET LOL
for a start,download link2sd from the market its free and easy to use,open the app,choose ext2,if a error msg appears,IGNORE IT for now and click on any app thats moveable u want to move to see if that works 1st
Old, outdated ROM with no root access. Use a newer one.
Yep its an old ROM. Don't worry though, you'll be able to redownload superuser on a new ROM. Just do what Sam says and it'll work fine. Surprised you even knew that you could flash android on to the hd2, because "you're a girl".
= What are you even doing asking whether or not you should root your phone on XDA?! =
ok guys thank you for the detailed informations!
i didnt know the rom is outdated - i guess installing a new one is the best idea in that case. i thought of that before, but it took me so long to get this one working so i wasn't in the mood for re-installing yet.
THANK YOU all, i will let you know if it worked - in case i cant fix this, would someone be able to help me via teamviewer?
Mialeelay said:
ok guys thank you for the detailed informations!
i didnt know the rom is outdated - i guess installing a new one is the best idea in that case. i thought of that before, but it took me so long to get this one working so i wasn't in the mood for re-installing yet.
THANK YOU all, i will let you know if it worked - in case i cant fix this, would someone be able to help me via teamviewer?
Click to expand...
Click to collapse
I'm pretty sire you won't need to give remote access, you'll be able to do it. All you'll need is the latest magldr 1. 13 (if I'm not mistaking)
Once you've got that, you just need to flash the clockwork mod daf file from usb flasher on magldr, then when you flash into clockwork its easy, just flash a zip file.
You can backup ROM's etc. from clockwork so its really convenient.
= What are you even doing asking whether or not you should root your phone on XDA?! =
I totally crashed it!!
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Start from the beggining by reflasing with the 3 colours on the screen, im no expert and I use magloader not clk, so try doing a fresh one with magloader and see how it goes
Mialeelay said:
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Click to expand...
Click to collapse
Plug the phone into the PC. Hold the back arrow key after turning the phone on to boot to fastboot . Then either try flashing Cwm via the NAND toolkit or do it manually through fastboot.
P. S. Did you install a radio?
Sent from my HD2 using XDA App
try to do it the way "typhoon" discribed it in his thread
http://forum.xda-developers.com/showthread.php?t=933951
under "Clean Install MAGLDR" with "Install tutorials"
(ich hab´s so gemacht und es funktionierte super)
thank you all, i will try the typhoon way out now..
Mialeelay said:
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Click to expand...
Click to collapse
Flash HSPL 3 pkg pick 2.0.8. HSPL, Than Task29 than use the toolkit and pick clk partition than when thats done hold back button and select recovery click install and follow the prompts. than hold home until you see recovery menu.
I DID IT
THANK YOU ALL!
I finally got it working
Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards
zgeorgiev said:
Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards
Click to expand...
Click to collapse
Did u flashed radio ?
I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.
zgeorgiev said:
I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.
Click to expand...
Click to collapse
Let mi simple u Task29 and Radio Rom
Task 29 - When u do task 29 to phone u delete everything even radio rom. So the thing u need to do is do this for magldr :
-Task29
-Radio Rom
-Magldr
-CWM
-Wipe
-Flash Rom
-Calibrate battery (some roms do it itself)
If it will make u easier i can make tutorial but im pretty much sure there is milions of them .
Try that way and report if it worked . Its 30min process.
EDIT: HD2 powered by WM is crippled yea. Android is far superiour even withou cam. But let me tell u one thing first thing why i tooked HD2 is Windows by stock and customization possible. Didnt carred about low battery etc. Windows is till now unbeatable bussines platform. iOs is near but its not it. Android hard to get bussines capable like windows 7. What I mean windows is bussines ready,iPhone is kinda ready and on android u have to customize like hell to get everything (at least what I as system admin need)
Task29 does not delete your radio. I was sure of it because I had flashed my phone a lot of times in the past, but anyway, I tried your method and the result was the same. When I install Magldr and then CWM, the phone does not let me enter the CWM menu so I cannot continue with the flashing of the Android ROM itself. It is just not possible without CWM. I also tried cLK method but when I press and hold the home key, the phone restarts and I get to a dead end once again. Thanks for your help anyway.
As far as WM is concerned, there is absolutely no chance for me to use this phone with this OS. if I cannot find a way to manage the problem I will just sell the phone and buy a native Android one which will make things much easier for me.
Best regards
Which rom are u trying to install?
Sent from my HTC HD2 using Tapatalk
It is all the same which one because when you are not able to enter the CWM menu you cannot install anything, but for instance, let's say this one: http://forum.xda-developers.com/showthread.php?t=1264828
I had problems booting that rom too. Try this one http://forum.xda-developers.com/showthread.php?t=1326217 almost perfect. Mwakious has some bugs i w8 for him to fix it
You don't follow what I say. I cannot enter CWM menu so I cannot even start flashing any ROM, it doesn't matter which one it is.
Merry Christmass by the way!
Which windows mobile u have/had ? Can u run android from sd ? Can u tell me exact procedure u tried to install nand android? If u want to try ffaster u can pm me to send u skype or gtalk.
Hi
I have the same issue, in bootloader on ad recovery.. i get cannot read ramdisk image, I will not uninstall ANDROID, because I will no longer support android, if I can not install any other roms
Any other advice, but to not lose my actual ROM!!!!
PS: I had installed ROM Manager latest, and installed clockwork from rom manager, Till then the recovery worked....
Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App
Reaper1337 said:
Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App
Click to expand...
Click to collapse
And do I lose my actual ANDROID ROM?
And How to use that toolkit?
THANK YOU IN ADVANCE!
EDIT:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
THANK YOU!!!
rilley said:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
Click to expand...
Click to collapse
Could you please explain me step by step how exactly you managed to solve the problem. I installed HD2 Toolkit 4.2.0.1 and try to use Update recovery function but the console that opens after I start the process freezes and I cannot continue. There is an explanation in it saying that probably the USB connectin is not good. However I use the USB flasher in Magldr menu for this connection between the phone and the PC and I don't know another way to connect both devices for the installation process. Is there something that I am missing?
By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
Thanks in advance!
@By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
For this question I do not know any answer, but for USB Connection I know because I had the same problem:
Put your phone in debugging mode.. and connect it to PC..
Use usbdeview to delete any android drivers from that list..
Then in device manager find any new hardware, and right click, and update: Browse my driver manually> Let me pick my driver> find the driver from http://forum.xda-developers.com/showthread.php?t=1090783 find "Download Drivers By T-Macgnolia", and after that you need to find Android Driver installed in device manager, after that hd2 toolkit will work.
Solution
You have to copy the files in the. Zip attachment inside the SD.
Make the whole process as usual, but instead choose the option you choose AD Recovery Boot option AD DS.
This way you can access the recovery menu and load the rom.
regards
Thx a lot!!!
This worked for me- just perfect!!!
Mikel
Worked for me as well, thanks very much, I was about to see how far the phone could fly.
Thanks
Hi, and many thanks.
I fixed my error like a charm.
Had the same problem
Thank you, this realy helped me out!
Hi guys!
I've got a problem.
I got a HTC HD2 with android on it.
I am not quite sure, how it was done because a friend of mine did this some time ago and i can't contact him...
Now i want to give the phone to my girlfriend, but I can't remove my google-account from it. I even set up her Google-Account on the phone but no luck, it says I'd have to reset the phone to stock settings.
Already did that but i wouldn't help, I am still not able to remove my account.
Of course i don't wanna share any details of my account with anyone else...
So I wanted to "update" the Android-System on it, but since I am kinda new to this, I don't know how... I don't even know with which method the Android-System was set up on the phone (NAND or SD).
Can you guys help me please?
I don't know what information you need to help me, so just ask here please and I will give you any information you need
Thanks!!
1, reboot your hd2 into recovery mode
2, choose "wipe factory",press "yes"
ps:it will delete your gmail account,and alos delete all the information...after that,u will get a new phone,i mean new syetem...
How do I put my phone into recovery mode?
Hold down the power button while booting?
There is only an "AD Recovery" option, and when I select it, it says "No boot sources"..
Looks like your golden friend had had android using the DAF.exe installer, which is rust old.
You'll need to upgrade your ROM as well; I presume it is old, too.
Use the link in my sig to look for "HD2 NAND Toolkit", follow that thread and it will guide you through the installation of a rom of your choice.
Hey!
Thank you for your responses
In the thread I was reading ([March 15] [Sense 3.5] Energy™ -.¸¸.·´¯ SensationXL/Runnymede build that just works ) it says, i have to start from a windows mobile based HD2.
Do I have to start up WinMo 6.5 in order to install Android? Because I am afraid I can't do that anymore (or I just don't know how...).
Or can I start up my phone (it will boot Android automatically) and follow the instructions from the thread instead?
Ok so i downloaded that tool, then started to "wipe" (Task 29) my phone.
Now it won't boot any further than until the white screen with green "htc" on it... :/ I think I might have broken the phone now? (( help!!
Yes, because task 29 wipes everything so there's nothing to boot.
Phone into bootloader
Apply magldr
Phone into magldr - USB flasher
In toolkit choose required partition size and click repartition
Into magldr - ad nand
Cwm will start, use it to flash the rom.zip.
Could of just tell him to flash a cwm recovery instead of "task29"... now he have to start all over... keep us updated on where you are at and what have you done so far...
Sent from my LG-P999 using xda premium