no usb connection in bootloader/magldr - HD2 Android Q&A, Help & Troubleshooting and Genera

i've made a hardreset via the bootloader on my hd2 and now when it has booted, sense crashes at the startup all the time and i can't see the device on the Pc (win7) i've tried to flash the dft rom again but i can't get no usb connection in the bootloader(wait usb) or the magldr menu(i have magldr 1.12). the led light is orange it's charging and it shows the menu of the connections for the pc /charge, htc sync etc... but even no connection. have i bricked my phone? :/

When you go to HSPL (tri colour) with your USB connected does it recognize your HD2 there?

no, it doesn't, when i connect the usb-cable to my hd2 and then connect it to the pc and go to the HSPL there is no usb or serial at the bottom, it is only white but when i got to the HSPL without connecting to the pc i have serial, does it matter?

Yeah that's like the most important thing. Have you tried a different USB socket/cable?
Sent from my HTC Vision using XDA App

yes different sockets but only the cable i have

Ohh well try use get a different cable. Ant old micro USB will work. I don't think there's anything you can do if SPL won't even recognize it.
Sent from my HTC Vision using XDA App

okay, i will try a different one, hopefully it works

have you reinstalled windows mobille device centre? sounds like the drivers are not installed correctly

Or Reboot PC, I had this problem, and freaked out. Till I rebooted my PC, and everything worked again.

The drivers wouldn't matter. The PC would still recognize the connection between both phone and PC. I actually never heard of this problem before. I only had a HD2 for 3 or so months though.
Sent from my HTC Vision using XDA App

Skellyyy said:
The drivers wouldn't matter. The PC would still recognize the connection between both phone and PC. I actually never heard of this problem before. I only had a HD2 for 3 or so months though.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
drivers do matter, i uninstalled the windows device centre then when you boot magldr it will stick and not find the usb, so yes drivers do matter, it was only upon reinstalling the drivers that it was found in magldr usb flash mode

yes i uninastalled wdc and no connection, i installed it again and it has tried to install the driver but unknown device no drivers found or device removed

Richy99 said:
drivers do matter, i uninstalled the windows device centre then when you boot magldr it will stick and not find the usb, so yes drivers do matter, it was only upon reinstalling the drivers that it was found in magldr usb flash mode
Click to expand...
Click to collapse
Yes they matter for flashing this through MAGLDR and if you don't have them you'll get a RAPI.DLL error. MAGLDR isn't the same as the bootloader though. The bootloader should just recognize the connection. But obviously there's something wrong with the phone as the phone when in bootloader isn't trying to do anything.
Lol I fail at explaining it.
Sent from my HTC Vision using XDA App

can i flash the windows mobile leo.nbh via the sd card?
i've flashed the artemis rom via the sd but there was winmo installed does it work when i have android installed?

Erm I don't really understand the question but if you mean can you flash the stock Leo ROM over MAGLDR and Android well then yes it is. Just rename it to LEOIMG.nbh and pop your SD card in and flash it. So you've flashed Artemis ROM already? I'd rather flash that as you still have HSPL and not SPL. But yeah you can easily flash the stock ROM via SD card and it will flash over Android.
Sent from my HTC Vision using XDA App

no i havent flashed artemis
i want to flash the stock htc winmo rom3.14
i have SPL-2.08. HSPL
Hmm flashing wp7 via the sd isn't possible, yet? am i right?

Yeah you're right its not possible. Don't think it is possible anyway. If you flash stock you'll lose HSPL and just return to stock which is 2.08.0000. If you do that and it fails you'll be stuck in the bootloader and won't have the ability to flash anything because you need HSPL to do that. So I recommend you flash a custom WinMo ROM from the SD card first and see if it works.
Sent from my HTC Vision using XDA App

okay i'll try a custom rom, thank you

Any luck with this man?
Sent from my HTC Vision using XDA App

Im also waiting for a response. My phone just shows SERIAL in bootloader. no USB signs at all. The phone charges on Android, but it doesnt load the SDCARD to be seen on windows. My be a Radio problem because when I try to flash anything from the SDCARD (holding vol down and turning on), the screen show the tricolor, then flashes really quick like in 1/4 of a second, then go back to the tricolor. its getting painfully annoying! Anyone with some sort of solution.

Related

[q] need help

Im switching to nand rom,but my laptop will not huck up to my leo vire usb.....so is it poss to flash by bluetooth? Thanks
OP,
I'm going to assume when you use the term NAND ROM, you're implying that you're trying to install Android onto your device.
Having said that, what do you mean exactly that your HD2 is not able to connect to your laptop?
Are you not able to get "USB" in the tri-colored screen when connecting your HD2 to your laptop? Or has your laptop busted all of its USB ports?
KARMIK said:
Im switching to nand rom,but my laptop will not huck up to my leo vire usb.....so is it poss to flash by bluetooth? Thanks
Click to expand...
Click to collapse
If you mean your computer is not recognizing your HD2 while pluged in then this is fixable. If you are trying to flash a NAND Andriod ROM you need to hold down the power button as you turn on your HD2 until you see MAGLDR come up and then select NAND flasher then flash the ROM. You can not use the bootloder to flash a NAND Andriod ROM. Also the reason why your computer is not recognizing your HD2 in bootloader is when you installed MAGLDR to your HD2 it changed the drivers for your phone on the USB port you used to flash MAGLDR. So if you ever want to reflash a Wndows Mobile ROM you will have to use a different USB port or manually change the drivers on your USB port back to your stock drivers for your HD2. You can also try using anothet computer. If non of the above helps try anoyher USB cable yours could posibbly be faulty.
KARMIK said:
Im switching to nand rom,but my laptop will not huck up to my leo vire usb.....so is it poss to flash by bluetooth? Thanks
Click to expand...
Click to collapse
MAN BE CAREFUL AND FLASH AFTER GOING THROUGH THE HELP PROVIDED HERE DEPENDING ON THE HD2 VERSION U HAVE EURO OR T MOBILE
FLASH VIA CWM FROM MALGDR AND INSTALL FROM SD CARD
http://forum.xda-developers.com/showthread.php?t=653614
http://forum.xda-developers.com/showthread.php?t=609477

[Q] Computer won't recognize HD2 w/ WP7 to flash Android

Right now my HD2 is flashed with WP7 using Magldr. I want to get rid of the WP7 and try android. But when I plug my phone into the computer the computer won't find my phone. Zune finds it just fine, but when I search for devices nothing comes up, not even unknown. I've tried different cords, different ports and I don't know what to do.
caitiebugg87 said:
Right now my HD2 is flashed with WP7 using Magldr. I want to get rid of the WP7 and try android. But when I plug my phone into the computer the computer won't find my phone. Zune finds it just fine, but when I search for devices nothing comes up, not even unknown. I've tried different cords, different ports and I don't know what to do.
Click to expand...
Click to collapse
this is what actually did last night.....i downloaded a win6.5 rom i put the phone in bootloader(the tri color screen,u knw....volume down and power on at same time)....i then proceeded to Romupdate.....and let it flash win6.5....after that i booted...went to the win6.5 menu and reformetted the sd card....after that i mounted the sdcard and did the basic steps.....installed manglr then clockworld then install rom zip....well i hope i helped if u need help feel free to pm me
boot into the magldr loader and select usb flasher mode, see if it turns to usb
u can always flash via the microsd card.
Yes, thank you all so much!! I put it in USB Flasher Mode, and it worked!

Phone crashed restore needed

hello, i have a htc hd2 with cyanogen mod 6 on it. a few days ago it started saying i hadnt a sd card.. then a days after that my screen gamma turned way up so it was almost white, afterthat my touchscreen didnt worked anymore and afterthat it stucks when i try to unlock my simcart.
i would like to backup games and that **** but i cant get into my phone
so i think i need to install software again or something. so is there a tut that can help me out. with installing new nand os or fixing my problem?
thnx very very much
More information pls.
Do you have clockwork mod?
Sent from my HTC HD2 using xda premium
reply
You should install hd2 nand toolkit on your computer it allows you to install lateat magldr and clockwork mod to phone when this is done you can install another rom to your hd2. If your phone is corrupted you may need to reinstall win 6.5 to you phone in order to install spl and new radio in order to get your phone working. Read up on it here on xda or check installing roms or android on hd2 on youtube in step by step guides hooe this helps
hey i have no clockwork mod, cyanogen 6
and i dont know the radio. when i connect my phone to my computer i hear a sound but not the right connected sound. my phone is recharging but not file transfering. with this problem i cant install any other rom's radio's or reset my phone with task29.
please any help
iefen said:
hey i have no clockwork mod, cyanogen 6
and i dont know the radio. when i connect my phone to my computer i hear a sound but not the right connected sound. my phone is recharging but not file transfering. with this problem i cant install any other rom's radio's or reset my phone with task29.
please any help
Click to expand...
Click to collapse
Go into bootloader and the do task29
SwiftKeyed from my HTC HD2 via XDA PREMIUM APP
already tried, when i go into bootloader it doesnt say usb when i m connected it says nothing except if i turn my cable out of it then it says serial.
if i try it without it says usb down, it says check connection on task29
Maybe the usb cable is broken?!
SwiftKeyed from my HTC HD2 via XDA PREMIUM APP

[Q] Waiting USB ... in MAGLDR USB Flasher

Hi alls,
I was using MIUI NAND Rom and one day, I would like to change to Sense based ROM. I firstly re-flashed (and partitioned) my HD2 but get stuck at "Wait USB ..." when entering Flasher mode.
I am using Windows 7 - 32bit, with Windows Mobile Device Center installed; ADB USB installed and working properly (Windows regconized my HD2 as MAGLDR).
It's weird because I used to flashed NAND ROM almost dozen times before. I also tried to flash back to WM6.5 and start over again, HardSPL is Oke, it still regconized my USB connection. But after flash MAGLDR 1.13, I cannot get Flasher mode worked. Already tried downgrade MAGLDR 1.11, still cannot worked.
I read all related threads. I tried different USB drivers (from Google, HTCSync, PDANET, EasyTelther) but no hope until now. It's very frustrated
Any body has encountered this problem ? Please help !
Thanks in advance,
Try to do task29.
And a real complete reinstall.
Task 29
Magldr
Cwm
Then Rom
Sent from my HD2 using xda premium

Cannot Flash

Hi, got an HD2 1024 have been able to flask roms and other things fine until today....I use Magldr to flash roms and I wanted to to use Clk for another rom,wen I get to bootloader screen and it says USB I then go on to flash the RUU but it will not only it will wime out,and cannot do task 29 will not flash that...any help...anyone??
No task 29, you booted in tri-color and tried?
Sent from my HTC HD2 using XDA App
yea everytime i get to the tri-color screen and it says"usb" start up the RUU
and it doesnt start flashing,just times out,says usb not connected.tried a different usb port still no progress.tried the prog HD2 Toolkit same results.
it will go into magldr and can do roms and such but cannot flash in tri-color.
gatekeeper007 said:
yea everytime i get to the tri-color screen and it says"usb" start up the RUU
and it doesnt start flashing,just times out,says usb not connected.tried a different usb port still no progress.tried the prog HD2 Toolkit same results.
it will go into magldr and can do roms and such but cannot flash in tri-color.
Click to expand...
Click to collapse
Check drivers are installed on PC in device manager (right click my comp - manage - device manager) and make sure u are running apps as administrator
Sent from my HTC HD2 using XDA App

Categories

Resources