Related
before i asked how to flash my t-mobile hd2 and some of friends helped me and finally i did it )) thanks everyone...
now i learned about task 29. i have a few questions about it. first i think there are diffrent task 29 and i really couldn't understand which one for t-mobile hd2. second task 29 format my device so if i format my device by task 29 will i have to flash a radoi before i flash rom? i mean does task 29 also format the radio too? i didn't need to flash any radio before i flashed kumar's rom. but i thought maybe i need to flash a radio if i use task 29...
thanks for everyone....
Muzun28 said:
before i asked how to flash my t-mobile hd2 and some of friends helped me and finally i did it )) thanks everyone...
now i learned about task 29. i have a few questions about it. first i think there are diffrent task 29 and i really couldn't understand which one for t-mobile hd2. second task 29 format my device so if i format my device by task 29 will i have to flash a radoi before i flash rom? i mean does task 29 also format the radio too? i didn't need to flash any radio before i flashed kumar's rom. but i thought maybe i need to flash a radio if i use task 29...
thanks for everyone....
Click to expand...
Click to collapse
There are two different ones and both are safe for the HD2. One will erase your radio (task 29 w/mitty-also requires you to intall pc drivers) the other (task 29 w/o mitty) doesn't need drivers or and wont remove the already installed radio. Below is a link to the task 29 w/o mitty which wont touch your already installed raido and the second link is to a video tutorial on how to preform task 29. FYI Remove both the sim and sd card before tasking it.
Task 29 w/o mitty by doloop (wont delete raido)
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
Video Tutorial
http://www.youtube.com/watch?v=DtTDuc4V4cU
If you need anymore help check out my sticky, the link is in my sig or at the top of the General Forum. Towards the bottom of the 1st page you have tons of Leo flashing video guides.
What happens if you task29 with the sim card in the phone? I did it a couple times last night without removing it.
juggs said:
What happens if you task29 with the sim card in the phone? I did it a couple times last night without removing it.
Click to expand...
Click to collapse
Nothing apparently. I'm just paranoid.
ddgarcia05 said:
Nothing apparently. I'm just paranoid.
Click to expand...
Click to collapse
Now that you mention it, I will too. I'm paranoid also.
thank you so much for this information....
I tried to use Task29 and...
I tried to use Task29 and the screen of the TP2 says: " STICK TOGETHER"
That means that I have to start saving to get me another phone or is there any hope to fix my beloved phone, thanks!!!!
I've been an active member ( I read a lot),but somehow I made a fatal mistake and my phone's screen says "stick together"; I tried to press the soft keys and power button at the same time, and nothing happens!! Any help is appreciated!!!!
saltinez said:
I tried to use Task29 and the screen of the TP2 says: " STICK TOGETHER"
That means that I have to start saving to get me another phone or is there any hope to fix my beloved phone, thanks!!!!
I've been an active member ( I read a lot),but somehow I made a fatal mistake and my phone's screen says "stick together"; I tried to press the soft keys and power button at the same time, and nothing happens!! Any help is appreciated!!!!
Click to expand...
Click to collapse
You need to get the TP2 into bootloader mode and flash a new rom from there.
Here's a link on how to get the phone into bootloader mode. http://forum.ppcgeeks.com/showthread.php?t=97778
saltinez said:
I tried to use Task29 and the screen of the TP2 says: " STICK TOGETHER"
That means that I have to start saving to get me another phone or is there any hope to fix my beloved phone, thanks!!!!
I've been an active member ( I read a lot),but somehow I made a fatal mistake and my phone's screen says "stick together"; I tried to press the soft keys and power button at the same time, and nothing happens!! Any help is appreciated!!!!
Click to expand...
Click to collapse
Did you use the task 29 for the HD2 on a TP2?
so basically task 29 lets you delete the previous ROM, then you can load any ROM on to the device? i need a warranty claim so im trying to get rid of this custom ROM and i need the stock ROM, please help guys please
Will doing a Task 29 allow the phone from Windows to boot faster? Just asking cuz most of the time my phone will get stuck on "Stick Together" while booting unless I pull the battery out and leave it out for about 10 minutes before rebooting.
Thanks
magentawave said:
Will doing a Task 29 allow the phone from Windows to boot faster? Just asking cuz most of the time my phone will get stuck on "Stick Together" while booting unless I pull the battery out and leave it out for about 10 minutes before rebooting.
Thanks
Click to expand...
Click to collapse
No. Task 29 is a method of deleting all data on your phone.
Also, it sounds like you have some issues with either your battery or the battery connectors.
cant sync to pc
Ive installed hard 2.08 hspl4, magldr 1.13 , flashed via sd two different roms a desire DL and an miui rom that actually seemed to work once i got it booted but wouldnt re-boot...
ive re-formatted my sd card and am now stuck in magldr land... would like to do a task 29 or flash back to an official wm 6.5 rom but cannot get ANY roms to boot... even the miui or the desire which i had managed to get loaded previously.. magldr sticks on the go go go! screen
so my question is at this point is there anyway to reset the internal memory or any recovery method?
My guess is if i cant get a rom to boot i'll never sync which means i cant get back to the official rom in order to start from scratch.. im sure at this point the internal memory is in need of cleaning... any help would be greatly appriciated as ive been reading for days..
and its a leo 1024
shady-j said:
Ive installed hard 2.08 hspl4, magldr 1.13 , flashed via sd two different roms a desire DL and an miui rom that actually seemed to work once i got it booted but wouldnt re-boot...
ive re-formatted my sd card and am now stuck in magldr land... would like to do a task 29 or flash back to an official wm 6.5 rom but cannot get ANY roms to boot... even the miui or the desire which i had managed to get loaded previously.. magldr sticks on the go go go! screen
so my question is at this point is there anyway to reset the internal memory or any recovery method?
My guess is if i cant get a rom to boot i'll never sync which means i cant get back to the official rom in order to start from scratch.. im sure at this point the internal memory is in need of cleaning... any help would be greatly appreciated as ive been reading for days..
and its a leo 1024
Click to expand...
Click to collapse
When you do a task29 it erases everything on the HD2 except the Radio and the HSPL.. so once you d the tas29 you have to either put magldr again and flash WP7/Android or after the task29 flash a wm6.5 rom from the boot loader
theres no recovery method for a task29
MAGLDR doesn't work with wm6.5
finally got a nand rom on via usb flasher ( magldr 1.13) but it will not reboot. ive set it through the bootloader to boot from nand and then went to the "always" menu selcted no and then reset. it will boot if i take out the battery and wait for 10 minutes then put it back in but once im up with the rom running .. which works great btw... (stock desire rom DFT) i cannot turn the phone off and then back on .. it will stick on the magdlr screen with no menu...
so i have the rom up at this point and im trying to do a task 29.. ive installed several roms and would like to clean the internal memory .. but when i sync with htc sync and try to run the task 29 exe i get a connection error... i cant run any custom RUU... do to the same error
which means i cant flash back to the original wm 6.5
am i missing something? is there a version that will allow me to task 29 from within magldr? tried tty and usb flasher modes..
thanks for any help....
How?
Thanks for the help.
I have been running MAGLDR 1.13 and running wp7 ,im confused on how i cud sync my phone to the PC to start task29? shoud i get into bootloader rainbow screen and connect USB and then perform task 29 or is there another way?
syedtalat said:
Thanks for the help.
I have been running MAGLDR 1.13 and running wp7 ,im confused on how i cud sync my phone to the PC to start task29? shoud i get into bootloader rainbow screen and connect USB and then perform task 29 or is there another way?
Click to expand...
Click to collapse
You can do it via USB or via SDCard.
USB:
Go into bootloader (volume down while powering on)
Run flasher
Card:
Rename the task29 nbh file to "leoimg.nbh"
Put it on root of card
Go into bootloader (volume down while powering on)
You can also download the HD2 toolboox from teh sticky topic in nand section, that has all the needed flashers in one gui like magldr, task29, cwm etc.
TheATHEiST said:
You can do it via USB or via SDCard.
USB:
Go into bootloader (volume down while powering on)
Run flasher
Card:
Rename the task29 nbh file to "leoimg.nbh"
Put it on root of card
Go into bootloader (volume down while powering on)
You can also download the HD2 toolboox from teh sticky topic in nand section, that has all the needed flashers in one gui like magldr, task29, cwm etc.
Click to expand...
Click to collapse
Task 29 does not work on an SD card, only via USB.
It's an *.exe. connect your hd2 VIA usb in bootloader mode and doubleklick task29.exe. it will install as a new rom and after your flash will be empty. Then you have to flash a new ROM.
Sent from my HD2 Desire S using XDA App
sframbo said:
It's an *.exe. connect your hd2 VIA usb in bootloader mode and doubleklick task29.exe. it will install as a new rom and after your flash will be empty. Then you have to flash a new ROM.
Sent from my HD2 Desire S using XDA App
Click to expand...
Click to collapse
I think the OP is having trouble with the USB...
i've made a hardreset via the bootloader on my hd2 and now when it has booted, sense crashes at the startup all the time and i can't see the device on the Pc (win7) i've tried to flash the dft rom again but i can't get no usb connection in the bootloader(wait usb) or the magldr menu(i have magldr 1.12). the led light is orange it's charging and it shows the menu of the connections for the pc /charge, htc sync etc... but even no connection. have i bricked my phone? :/
When you go to HSPL (tri colour) with your USB connected does it recognize your HD2 there?
no, it doesn't, when i connect the usb-cable to my hd2 and then connect it to the pc and go to the HSPL there is no usb or serial at the bottom, it is only white but when i got to the HSPL without connecting to the pc i have serial, does it matter?
Yeah that's like the most important thing. Have you tried a different USB socket/cable?
Sent from my HTC Vision using XDA App
yes different sockets but only the cable i have
Ohh well try use get a different cable. Ant old micro USB will work. I don't think there's anything you can do if SPL won't even recognize it.
Sent from my HTC Vision using XDA App
okay, i will try a different one, hopefully it works
have you reinstalled windows mobille device centre? sounds like the drivers are not installed correctly
Or Reboot PC, I had this problem, and freaked out. Till I rebooted my PC, and everything worked again.
The drivers wouldn't matter. The PC would still recognize the connection between both phone and PC. I actually never heard of this problem before. I only had a HD2 for 3 or so months though.
Sent from my HTC Vision using XDA App
Skellyyy said:
The drivers wouldn't matter. The PC would still recognize the connection between both phone and PC. I actually never heard of this problem before. I only had a HD2 for 3 or so months though.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
drivers do matter, i uninstalled the windows device centre then when you boot magldr it will stick and not find the usb, so yes drivers do matter, it was only upon reinstalling the drivers that it was found in magldr usb flash mode
yes i uninastalled wdc and no connection, i installed it again and it has tried to install the driver but unknown device no drivers found or device removed
Richy99 said:
drivers do matter, i uninstalled the windows device centre then when you boot magldr it will stick and not find the usb, so yes drivers do matter, it was only upon reinstalling the drivers that it was found in magldr usb flash mode
Click to expand...
Click to collapse
Yes they matter for flashing this through MAGLDR and if you don't have them you'll get a RAPI.DLL error. MAGLDR isn't the same as the bootloader though. The bootloader should just recognize the connection. But obviously there's something wrong with the phone as the phone when in bootloader isn't trying to do anything.
Lol I fail at explaining it.
Sent from my HTC Vision using XDA App
can i flash the windows mobile leo.nbh via the sd card?
i've flashed the artemis rom via the sd but there was winmo installed does it work when i have android installed?
Erm I don't really understand the question but if you mean can you flash the stock Leo ROM over MAGLDR and Android well then yes it is. Just rename it to LEOIMG.nbh and pop your SD card in and flash it. So you've flashed Artemis ROM already? I'd rather flash that as you still have HSPL and not SPL. But yeah you can easily flash the stock ROM via SD card and it will flash over Android.
Sent from my HTC Vision using XDA App
no i havent flashed artemis
i want to flash the stock htc winmo rom3.14
i have SPL-2.08. HSPL
Hmm flashing wp7 via the sd isn't possible, yet? am i right?
Yeah you're right its not possible. Don't think it is possible anyway. If you flash stock you'll lose HSPL and just return to stock which is 2.08.0000. If you do that and it fails you'll be stuck in the bootloader and won't have the ability to flash anything because you need HSPL to do that. So I recommend you flash a custom WinMo ROM from the SD card first and see if it works.
Sent from my HTC Vision using XDA App
okay i'll try a custom rom, thank you
Any luck with this man?
Sent from my HTC Vision using XDA App
Im also waiting for a response. My phone just shows SERIAL in bootloader. no USB signs at all. The phone charges on Android, but it doesnt load the SDCARD to be seen on windows. My be a Radio problem because when I try to flash anything from the SDCARD (holding vol down and turning on), the screen show the tricolor, then flashes really quick like in 1/4 of a second, then go back to the tricolor. its getting painfully annoying! Anyone with some sort of solution.
I tried putting windows 7 on my htc hd2 and it wont get past the bootloader screen. I can enter the tri-color screen and my HSPL 2.08. Please help me
Do you have MAGLDR on your HD2, Or will it just boot into the multicolor bootloader?
Yea I have MAGLDR
Sent from my MB200 using XDA App
u have to do it by going into magldr usb flasher mode u cant do it through normal bootloader
JDog10 said:
Yea I have MAGLDR
Sent from my MB200 using XDA App
Click to expand...
Click to collapse
The other post is correct you have to use option #4 USB Flasher from the main menu of MAGLDR. What WP7 ROM are you trying to gflash so I can check the thread out. A link would be nice if you can post it I did not look at your post count.
Also go to option #10 services of MAGLDR and then select option #1 Boot Settings and make sure it is set to option #3 WPH from NAND. If it is not on that option set it to that option and then go back to the main MAGLDR menu and select option #1 Boot WPH and if your WP7 ROM is on the phone it should boot up and boot straight back into WP7 if you turn your phone of and back on. Or you could just option #11 of the main MAGLDR menu after you checked the setting I mentioned and it will reboot to WP7. Also you will see MAGDLR for a minute every time you boot your phone as it is what boots WP7
When I try to go into flasher mode the phone can't be found
Sent from my MB200 using XDA App
JDog10 said:
When I try to go into flasher mode the phone can't be found
Sent from my MB200 using XDA App
Click to expand...
Click to collapse
Sounds like you are having an issue with the drivers for MAGLDR installing. You should try changing USB ports and if this doesn't help try another computer. Also what Windows version does your computer use?
Also try going to option #4 of MAGLDR the USB Mass Sty option and see if the drivers install for you to have access to your storage card. This might help you with the flasher too.
I already tried it and it won't work. I'm using windows 7. I can connect to my computer when I go into mass storage mode
Sent from my MB200 using XDA App
JDog10 said:
I already tried it and it won't work. I'm using windows 7. I can connect to my computer when I go into mass storage mode
Sent from my MB200 using XDA App
Click to expand...
Click to collapse
are you running the DFT flasher "as administrator"
also, try different USB port.
Thanks I ran it as an administrator and it worked.
Hi alls,
I was using MIUI NAND Rom and one day, I would like to change to Sense based ROM. I firstly re-flashed (and partitioned) my HD2 but get stuck at "Wait USB ..." when entering Flasher mode.
I am using Windows 7 - 32bit, with Windows Mobile Device Center installed; ADB USB installed and working properly (Windows regconized my HD2 as MAGLDR).
It's weird because I used to flashed NAND ROM almost dozen times before. I also tried to flash back to WM6.5 and start over again, HardSPL is Oke, it still regconized my USB connection. But after flash MAGLDR 1.13, I cannot get Flasher mode worked. Already tried downgrade MAGLDR 1.11, still cannot worked.
I read all related threads. I tried different USB drivers (from Google, HTCSync, PDANET, EasyTelther) but no hope until now. It's very frustrated
Any body has encountered this problem ? Please help !
Thanks in advance,
Try to do task29.
And a real complete reinstall.
Task 29
Magldr
Cwm
Then Rom
Sent from my HD2 using xda premium
can anyone help me? i tried to change my phone to lower rom version like was said needs to be installed on phone and needed to install windows mobile 7 on the htc hd2 phone and it keeps going to rom installation failure screen and rom installation recovery why wont it work help what do i need to do also it was the dark forces team rom update utility.
bobbymd said:
can anyone help me? i tried to change my phone to lower rom version like was said needs to be installed on phone and needed to install windows mobile 7 on the htc hd2 phone and it keeps going to rom installation failure screen and rom installation recovery why wont it work help what do i need to do also it was the dark forces team rom update utility.
Click to expand...
Click to collapse
Can you be more specific about what ROM you are trying to install, and how you tried to install it? Also, do you have HSPL amd MAGDLR installed on your phone?
If you can provide more specific details it will be easier to understand what is happening with your phone.
ok thanks its the madglr rom to set up the phone for next step in installing wm7 on the htc hd2 its the custom ruu version 2.15 for install on phone and its not going through
bobbymd said:
ok thanks its the madglr rom to set up the phone for next step in installing wm7 on the htc hd2 its the custom ruu version 2.15 for install on phone and its not going through
Click to expand...
Click to collapse
From your description it is quite hard to understand what your are attempting to do. My guess is that you are trying to install a Windows Mobile ROM before installing WP7. If that is the case, then you should be installing the Windows Mobile ROM when you are at the tri-colored bootloader screen. Turn on your phone with the volume down key pressed to get to this screen. Connect your phone to your computer, wait til you see "Serial" change to" USB" and flash your HD2 with the desired Windows Mobile 6.5 ROM
im trying to flash from 6.5.3 to wm7
bobbymd said:
im trying to flash from 6.5.3 to wm7
Click to expand...
Click to collapse
Are going into the MAGDLR screen options when booting and choosing option 5 USB Flasher before connecting your phone to the computer? Also what version of HSPL are you using? WP7 doesn’t support HSPL3.03/OSPL3.03. You need to select HSPL2.08 to run WP7 and MAGLDR.
im not seeing that screen and options for option 5 usb flasher im getting the rom update utility screen on my pc its 3.27.4.0 version madglr
bobbymd said:
im not seeing that screen and options for option 5 usb flasher im getting the rom update utility screen on my pc its 3.27.4.0 version madglr
Click to expand...
Click to collapse
You must install MAGDLR on your phone before you can flash WP7. When it is installed on your phone, hold the power button when you see the MAGDLR screen while booting the phone, and then you can choose option 5.
i tried doing the install of madglr on phone and it keeps failing it wont update phone it goes into the update recovery screen and says to unplug from pc etc
bobbymd said:
i tried doing the install of madglr on phone and it keeps failing it wont update phone it goes into the update recovery screen and says to unplug from pc etc
Click to expand...
Click to collapse
Hmm, did you install HSPL2.08 on your phone before trying to install MAGDLR?
yes and both wont go through they both fail
bobbymd said:
yes and both wont go through they both fail
Click to expand...
Click to collapse
Try changing USB ports on your computer, you might have a hardware driver problem. Also, use a USB port on your computer, not on a hub.
ok i will try that and see and get back
bobbymd said:
ok i will try that and see and get back
Click to expand...
Click to collapse
Okay, I have to get offline soon, so good luck. Check device manager on your computer to make sure the driver is installed correctly.
ok tried that and got the same thing i tried a 3rd port on my pc the device driver installed properly it said and still got the same thing dont understand whats happening and it seems in videos i saw on different sites it happens easy for them i dont get why it wont work for me??
Perhaps others may have an idea. On my T-Mobile HTC HD2 everything installs easily
Sent from my HTC Glacier
ok thanks bud
You are welcome. Other than the driver not installing correctly when you are in the bootloader I am not sure what could be your problem.
I am sure others will have more ideas for you. Good luck.
Sent from my HTC Glacier