Related
had this not so great idea last night that I would flash my nand android ROM for my HTC HD2 on Tmobile UK, by formatting the SD card then reinstalling CWD and flashing the ROM...
Unfortunately my fone will not switch on, I can get it into bootloader but do not know what to do from here...
any ideas?
I think I need to reinstall magdlr 1.3, then clockwork mod then my nand android rom, can anyone confirm this is right?
please help
ta
whilst I can get into bootloader and it says USB , my PC will not let me access the SD card, nothing happens at all like when the Open folder pop up appears, well it doesnt....
what have I done??
Is the HSPL 3 already installed on the phone?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
You need to take your sd card out of your phone and use a card reader. There is a problem with Magdlr usb so that would be the only way to copy things to and from the sd card.
I would do a task29, reinstall magldr, clockwork and then go into clockwork and install.
Hope this helps.
bodyman
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
xirokx said:
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
Click to expand...
Click to collapse
quick seaches found this:
Task29
and you need to be in the bootloader to install magldr -- you use RUU to install that. Then once into madldr, then you can install clockwork -- that uses DAF.
Also, you should upgrade to 3.0.
Hope this helps
Please go read some n00b guides, everything you asked about here is VERY cleary documented, There is absolutley no need at all for this type of topic.
Not trying to be an arse but its just really annoying seeing the forums flooded with these types of topics daily and its because people dont follow simple logic and look at stickies or guide topics prior to jumping in.
trouble is when I connect my phone via usb to PC in order to update to HARDSPL3 nothing happens...
Its like my phone just will not sync with my pc
Even if I get the phone to bootloader mode, where it first says serial, when I connect the fone it does say USB but nothing else happens...
Where are these guides? why are they so hidden...
I dont know if my fone is bricked...please help
If I where you, I would start from scatch.
Go to bootloader when it says USB flash stock WM6.5
Flash HSPL 2.08
Flash MAGLDR
and so and so...
Same problem here with my boys phone. Only thing is, I can't flash anything and wmdc won't recognize the hd2. I feel like an ars lol. Just go buy an android phone and leave winmo in the dust ;-P You might enjoy unloading on it with an ar15 though muahaha
Sent from my HTC Glacier using XDA App
Try using different UBS port or UBS cord and make sure when in bootload your pc show a driver connecting with it or it won't work. And if your on window Vista or 7 try right clicking and run as admin
Also do not have your SD card in while doing this
Sent from my HTC Desire using XDA App
heres an update:
I installed HARDSPL 3.0
The phone then restarted and is working however I now need to install TASK29
But from lets call it my nand ROM main screen one it has loaded, when I connect attach a USB cable the phone will not sync will windows mobile device centre so I unable to perform TASK29
How can I get around this?
Its great the phone is working again however all I am confident after I manage to run TASK29 it will be clean so that I can install another NAND rom on to it...
Just desperately need my pc OS windows 7 to now recognise my phone so TASK 29 will work, but how?
thanks guys for your help
the plot thickens....
I went into booloader and it still shows SPL2.08 when I downloaded and installed HARDSPL3??? This is the filename I downloaded and installed HSPL3_PKG
Also after removing SD card, the phone boots into MAGDLR v1.13 and then keeps looping into reboot...
On a different note, this time when I phone switched on with USB attached but without SD CARD, my pc OS windows 7 installed a driver and it sees it but now I cannot get into the main ROM screen to run TASK29....
Gonna put the SD Card back in and hope it gets me there that way..will report back in 2 mins..
thanks for your help
so i reinstalled magldr 1.13 and clockworkmod but now when I am in magldr and go to boot ad sd I get the following error message:
load zImage
k: zimage
SD KERNAL OPEN FAILED
it cannot find clockwork mod is that right?
where do i go from here?
thanks for your help
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
Click to expand...
Click to collapse
3.0 is just an update to 2.08 that works for the newer hd2's
also, task29 will format your NAND -- it is like the ultimate hard reset. I use it when I switch from different roms. That way there is no residuals left over from any previous roms that may or may not cause problems.
check here for any ?'s that you might have. All stickies have been rolled up into one thread.
Well i noticed that task29 doesn't wipe everyhing. I had issues with various rome for a while, I tried task29 many times with no success, the only thing that solved theme where flashing stock 6.5...
And don't go to spl3 or you won't be able to flash magldr, stay on 2.08
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks guys
Click to expand...
Click to collapse
Is this a joke? i mean, the stickies are there, you only need to read them and follow the steps you have tutorials and howtos in task29 thread, then in the hardspl thread and in the hd2 sections (sd,nand).
anyway, i am glad, you worked it out
i've made a hardreset via the bootloader on my hd2 and now when it has booted, sense crashes at the startup all the time and i can't see the device on the Pc (win7) i've tried to flash the dft rom again but i can't get no usb connection in the bootloader(wait usb) or the magldr menu(i have magldr 1.12). the led light is orange it's charging and it shows the menu of the connections for the pc /charge, htc sync etc... but even no connection. have i bricked my phone? :/
When you go to HSPL (tri colour) with your USB connected does it recognize your HD2 there?
no, it doesn't, when i connect the usb-cable to my hd2 and then connect it to the pc and go to the HSPL there is no usb or serial at the bottom, it is only white but when i got to the HSPL without connecting to the pc i have serial, does it matter?
Yeah that's like the most important thing. Have you tried a different USB socket/cable?
Sent from my HTC Vision using XDA App
yes different sockets but only the cable i have
Ohh well try use get a different cable. Ant old micro USB will work. I don't think there's anything you can do if SPL won't even recognize it.
Sent from my HTC Vision using XDA App
okay, i will try a different one, hopefully it works
have you reinstalled windows mobille device centre? sounds like the drivers are not installed correctly
Or Reboot PC, I had this problem, and freaked out. Till I rebooted my PC, and everything worked again.
The drivers wouldn't matter. The PC would still recognize the connection between both phone and PC. I actually never heard of this problem before. I only had a HD2 for 3 or so months though.
Sent from my HTC Vision using XDA App
Skellyyy said:
The drivers wouldn't matter. The PC would still recognize the connection between both phone and PC. I actually never heard of this problem before. I only had a HD2 for 3 or so months though.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
drivers do matter, i uninstalled the windows device centre then when you boot magldr it will stick and not find the usb, so yes drivers do matter, it was only upon reinstalling the drivers that it was found in magldr usb flash mode
yes i uninastalled wdc and no connection, i installed it again and it has tried to install the driver but unknown device no drivers found or device removed
Richy99 said:
drivers do matter, i uninstalled the windows device centre then when you boot magldr it will stick and not find the usb, so yes drivers do matter, it was only upon reinstalling the drivers that it was found in magldr usb flash mode
Click to expand...
Click to collapse
Yes they matter for flashing this through MAGLDR and if you don't have them you'll get a RAPI.DLL error. MAGLDR isn't the same as the bootloader though. The bootloader should just recognize the connection. But obviously there's something wrong with the phone as the phone when in bootloader isn't trying to do anything.
Lol I fail at explaining it.
Sent from my HTC Vision using XDA App
can i flash the windows mobile leo.nbh via the sd card?
i've flashed the artemis rom via the sd but there was winmo installed does it work when i have android installed?
Erm I don't really understand the question but if you mean can you flash the stock Leo ROM over MAGLDR and Android well then yes it is. Just rename it to LEOIMG.nbh and pop your SD card in and flash it. So you've flashed Artemis ROM already? I'd rather flash that as you still have HSPL and not SPL. But yeah you can easily flash the stock ROM via SD card and it will flash over Android.
Sent from my HTC Vision using XDA App
no i havent flashed artemis
i want to flash the stock htc winmo rom3.14
i have SPL-2.08. HSPL
Hmm flashing wp7 via the sd isn't possible, yet? am i right?
Yeah you're right its not possible. Don't think it is possible anyway. If you flash stock you'll lose HSPL and just return to stock which is 2.08.0000. If you do that and it fails you'll be stuck in the bootloader and won't have the ability to flash anything because you need HSPL to do that. So I recommend you flash a custom WinMo ROM from the SD card first and see if it works.
Sent from my HTC Vision using XDA App
okay i'll try a custom rom, thank you
Any luck with this man?
Sent from my HTC Vision using XDA App
Im also waiting for a response. My phone just shows SERIAL in bootloader. no USB signs at all. The phone charges on Android, but it doesnt load the SDCARD to be seen on windows. My be a Radio problem because when I try to flash anything from the SDCARD (holding vol down and turning on), the screen show the tricolor, then flashes really quick like in 1/4 of a second, then go back to the tricolor. its getting painfully annoying! Anyone with some sort of solution.
Windows Phone 7 + MAGLDR V1.13
I boot up. HTC screen. Then MAGLDR V1.13 screen. Then another HTC screen (Windows Phone 7 HTC screen). It blocks there for quite some time. Then restarts. It's all it ever does. I can access MAGLDR V1.13 menu, no problem there. It was working fine yesterday =\
What can i do? Help :S
Reinstall the ROM and tell me what happens
Sent from my HTC HD2 using XDA Premium App
What Radio have you got on your phone?
I would re-install your ROM as walidhazem suggested, but make sure that you do a task 29 first, then flash either radio 2.12.50 or 2.15.50 as these seem to be the 2 best radios for WP7.
What SD card have you got as your issue could be related to that. Do you have another SD card you could try? You could also try using SDFormatter to re-format your SD card and then try.
Let us know how you get on.
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
as far as i remember it doesn't charge.. but even if it's less than 50% i usually do the flash.. just b sure it's not very low..
exhit said:
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
Click to expand...
Click to collapse
If you still have the magldr screen then boot in the rom. The reason it getting stuck is that the phone is too hot. Remove the battery for 1/2 hour then try again.
Do wait as the HTC screen is showing for a while until it loads the rom.
FPM
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
exhit said:
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
Click to expand...
Click to collapse
No need to flash wm6 just use task 29, then flash-in maglder 113 again, then flash your favourite rom again. But make sure to re-format you micro sd card first.
FPM
I can't instal Windows Mobile Center since "i don't have" a Windows Mobile device. I need the Active Sync feature needed for the RUU files. Without that i can't sync Task 29 or any new rom. What can i do?
Go to bootloader and install Roms like you used to do when using ActiveSync.
(Bootloader: Power off phone > Hold volume down button and boot > when you see a tri-colour screen connect the USB and wait until "Serial" to "USB" )
^^
That was the answer to your previous post. But to answer your original question :
Restarting in WP7 is a common, incompatible sd card, issue, try to use another sd-card and reinstall WP7 again.
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
exhit said:
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
Click to expand...
Click to collapse
how did you manage to flash it!!!
can anyone help me? i tried to change my phone to lower rom version like was said needs to be installed on phone and needed to install windows mobile 7 on the htc hd2 phone and it keeps going to rom installation failure screen and rom installation recovery why wont it work help what do i need to do also it was the dark forces team rom update utility.
bobbymd said:
can anyone help me? i tried to change my phone to lower rom version like was said needs to be installed on phone and needed to install windows mobile 7 on the htc hd2 phone and it keeps going to rom installation failure screen and rom installation recovery why wont it work help what do i need to do also it was the dark forces team rom update utility.
Click to expand...
Click to collapse
Can you be more specific about what ROM you are trying to install, and how you tried to install it? Also, do you have HSPL amd MAGDLR installed on your phone?
If you can provide more specific details it will be easier to understand what is happening with your phone.
ok thanks its the madglr rom to set up the phone for next step in installing wm7 on the htc hd2 its the custom ruu version 2.15 for install on phone and its not going through
bobbymd said:
ok thanks its the madglr rom to set up the phone for next step in installing wm7 on the htc hd2 its the custom ruu version 2.15 for install on phone and its not going through
Click to expand...
Click to collapse
From your description it is quite hard to understand what your are attempting to do. My guess is that you are trying to install a Windows Mobile ROM before installing WP7. If that is the case, then you should be installing the Windows Mobile ROM when you are at the tri-colored bootloader screen. Turn on your phone with the volume down key pressed to get to this screen. Connect your phone to your computer, wait til you see "Serial" change to" USB" and flash your HD2 with the desired Windows Mobile 6.5 ROM
im trying to flash from 6.5.3 to wm7
bobbymd said:
im trying to flash from 6.5.3 to wm7
Click to expand...
Click to collapse
Are going into the MAGDLR screen options when booting and choosing option 5 USB Flasher before connecting your phone to the computer? Also what version of HSPL are you using? WP7 doesn’t support HSPL3.03/OSPL3.03. You need to select HSPL2.08 to run WP7 and MAGLDR.
im not seeing that screen and options for option 5 usb flasher im getting the rom update utility screen on my pc its 3.27.4.0 version madglr
bobbymd said:
im not seeing that screen and options for option 5 usb flasher im getting the rom update utility screen on my pc its 3.27.4.0 version madglr
Click to expand...
Click to collapse
You must install MAGDLR on your phone before you can flash WP7. When it is installed on your phone, hold the power button when you see the MAGDLR screen while booting the phone, and then you can choose option 5.
i tried doing the install of madglr on phone and it keeps failing it wont update phone it goes into the update recovery screen and says to unplug from pc etc
bobbymd said:
i tried doing the install of madglr on phone and it keeps failing it wont update phone it goes into the update recovery screen and says to unplug from pc etc
Click to expand...
Click to collapse
Hmm, did you install HSPL2.08 on your phone before trying to install MAGDLR?
yes and both wont go through they both fail
bobbymd said:
yes and both wont go through they both fail
Click to expand...
Click to collapse
Try changing USB ports on your computer, you might have a hardware driver problem. Also, use a USB port on your computer, not on a hub.
ok i will try that and see and get back
bobbymd said:
ok i will try that and see and get back
Click to expand...
Click to collapse
Okay, I have to get offline soon, so good luck. Check device manager on your computer to make sure the driver is installed correctly.
ok tried that and got the same thing i tried a 3rd port on my pc the device driver installed properly it said and still got the same thing dont understand whats happening and it seems in videos i saw on different sites it happens easy for them i dont get why it wont work for me??
Perhaps others may have an idea. On my T-Mobile HTC HD2 everything installs easily
Sent from my HTC Glacier
ok thanks bud
You are welcome. Other than the driver not installing correctly when you are in the bootloader I am not sure what could be your problem.
I am sure others will have more ideas for you. Good luck.
Sent from my HTC Glacier
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?