Hi everyone,
I'm using i8000 with latest JJ1 Rom but even when I'm in area with 3G HSPA connection it show me in stat bar only "3G" In settings HSDPA/HSUPA is ON
My old HTC Kaiser showing "H" icon.
Is there any way to fix this?
Many thanks for relevant answers.
Related
Ok, quick question. Like many others, I upgraded from a 8125 to a 8525 using T-Mobile. Question being, on my service status indicators, I only get a "G" icon, and can connect to the internet. Should I get an "E" icon for using Edge? The 8125 did. Glitch or just GPRS?
I see G E and U symbols when connected with that service... so you are just out of EDGE range I think.
8525 only shows "G" for both GPRS & Edge and "U" for 3G.
If you were to upgrade to the new ROM, then you would see "G", "E", "3G" & "H" here in the States, In Europe you would also get "U".
prubin said:
8525 only shows "G" for both GPRS & Edge and "U" for 3G.
If you were to upgrade to the new ROM, then you would see "G", "E", "3G" & "H" here in the States, In Europe you would also get "U".
Click to expand...
Click to collapse
Yes indeed and there are other threads on this already existing - here is but one:
http://forum.xda-developers.com/showthread.php?t=287829&page=11&highlight=edge+umts
Mike
I am using Hermes, (Dopod 838Pro Hong Kong Version) with
ROM 1.23.708.4
Radio Rom 1.06.00.10
Protocol 32.37.7010.01H
The network I am using supports HSDPA, UMTS, EDGE and GPRS where I have not subscribed HSDPA service.
When I was with my Prophet, I saw there were an "E" icon and "G" icon to differentiate between EDGE and GPRS network respectively. However, I only get "U" icon and
"G" icon to identify UMTS and GPRS connection respectively.
My question is
1. HOW TO FIND OUT THE "E" ICON FOR EDGE?
(I have tried the registry tweak EnableDifferGprsEdgeIcon, but it was not successful)
2. IS THERE ANY "H" ICON FOR HSDPA CONNECTION?
3. IF I HAVE HSDPA SUBSCRIPTION, IS THERE ANY PROCEDURE TO CONNECT HSDPA / DISCONNECT HSDPA BACK TO UMTS?
Thank you very much!
I dont think you will get HSDPA with that radio. You will need to upgrade the radio rom at least (if not the OS too).
unwired4 said:
I dont think you will get HSDPA with that radio. You will need to upgrade the radio rom at least (if not the OS too).
Click to expand...
Click to collapse
Oh yes, I do have HSDPA with that version of Radio ROM. There's no indication for HSDPA. You have to use FieldText.exe to check it out. Or simply browse a web site and note the download speed (I use Spb GPRS Monitor)
felixtmwu said:
I am using Hermes, (Dopod 838Pro Hong Kong Version) with
ROM 1.23.708.4
Radio Rom 1.06.00.10
Protocol 32.37.7010.01H
The network I am using supports HSDPA, UMTS, EDGE and GPRS where I have not subscribed HSDPA service.
When I was with my Prophet, I saw there were an "E" icon and "G" icon to differentiate between EDGE and GPRS network respectively. However, I only get "U" icon and
"G" icon to identify UMTS and GPRS connection respectively.
My question is
1. HOW TO FIND OUT THE "E" ICON FOR EDGE?
(I have tried the registry tweak EnableDifferGprsEdgeIcon, but it was not successful)
2. IS THERE ANY "H" ICON FOR HSDPA CONNECTION?
3. IF I HAVE HSDPA SUBSCRIPTION, IS THERE ANY PROCEDURE TO CONNECT HSDPA / DISCONNECT HSDPA BACK TO UMTS?
Thank you very much!
Click to expand...
Click to collapse
Just about all your questions have come up before!
So for example you will find references to this as the best speed test - all you do is tapit into your device browser:
http://www.dslreports.com/mspeed?jisok=1
You'll find references to this info:
"G" - GPRS, GSM and EDGE
"U" - UMTS and HSDPA
You'll find there are tweaks for changing the non specific nature of the above.
Try that google sticky at the top of the messages list.
Cheers
Mike
Hi,
I am using the latest German HTC ROM on my Hermes
RUU_Hermes_QTEK_GER_2.15.257.1_104_6275_1.38.00.10_108_Ship.exe
This displays
G=GPRS
E=Edge
3G=UMTS
H=HSDPA
Regards
Frank
I flashed to Haykuros HTC build and like everyone else, noticed it the "H" above the signal icon. I thought it just pertained to the build as everyone suggested, but I noticed my phone will switch from 'E' to '3G' to 'H' depending on location.
Does this mean that HSDPA is active in my market, maybe just for testing purposes? I'm located in the NYC region.
any thoughts?
If you're referring to T-Mo USA, HSDPA has been active since launch. Plain vanilla UMTS only does 384k down. The H indicator shows up on Haykuro HTC because HTC wanted to differentiate between standard UMTS and HSXPA in the connection icon. You can see their custom icon in
5.0.2Hr3-signed.zip\system\framework\com.htc.resources.apk\res\drawable\stat_sys_data_connected_3_5g.png
Hi,
i upgraded my HTC TOUCH 3G to WM6.5 rom 2.33.721.31(Core21895) and i notice that the 3G icon is no longer appearing. pls advice
thanks!
Hello all, I have ZTE Axon 7 Quartz Gray A2017U. Everything is perfect, but there is one annoying issue.
When I'm connected to 3G network (3G, H, H+ how do you like it ) I get 4G icon in status bar which is not correct.
When I connect to LTE, I get correct 4G/LTE icon in status bar.
Can somebody post their 3G icon?
I'm rooted and installed xposed with gravitybox, but I didn't change any options regarding 3G icon.
Here are pictures with fake 4G and correct 4G/LTE.
Fake 4G (connected to 3G network)
Real 4G/LTE
Any ideas how to fix it?
Are you on AT&T? AT&T calls their advanced 3G, 4G.
imp3r10 said:
Are you on AT&T? AT&T calls their advanced 3G, 4G.
Click to expand...
Click to collapse
I'm not, Croatia - Tele2.
sipe1 said:
I'm not, Croatia - Tele2.
Click to expand...
Click to collapse
I think it's stock thing in US versions at least. I connect to 3G MicroCell (HSDPA+) and it show 4G, since that's how these are identified in US by carriers, so it will probably show 4G on anything above pure 3G so HSPA and above since here HSPA is 3.5G and HSPA+ is 4G
sipe1 said:
Hello all, I have ZTE Axon 7 Quartz Gray A2017U. Everything is perfect, but there is one annoying issue.
When I'm connected to 3G network (3G, H, H+ how do you like it ) I get 4G icon in status bar which is not correct.
When I connect to LTE, I get correct 4G/LTE icon in status bar.
Can somebody post their 3G icon?
I'm rooted and installed xposed with gravitybox, but I didn't change any options regarding 3G icon.
Here are pictures with fake 4G and correct 4G/LTE.
...
Any ideas how to fix it?
Click to expand...
Click to collapse
It's because you have the US model. US GSM carriers AT&T and T-Mobile marketed HSPA+ as "4G", even though it's based on 3G technology.
Thank you all for responses and clarification
Hi I have a question, i've been looking everywhere on the internet but I haven't found anything.
My Network type icon doesn't show up when im using it. I get no 4G/4G-LTE/3G Icon in my status bar.
How can I change/fix this?