Hi,
I currently have a WP7 - HD2 and would like to flash a cooked rom.
Spec
T-Mobile
Hard SPL 2.08 or higher
Radio which support 576 RAM.(Radio 2.15.50...)
Magldr 1.12
Do i have to revert back to W6.5 or can i just flash to the chosen Cooked Rom?
Much appreciated for any advice on this.
Bigsxy
Power your phone off. Long press the power button so that you boot back up intomagldr menu. Select USB flasher mode and off you go.
As simple as that...many thanks
Related
I needing advice and possible help converting to Android. I have download and tried to change the ROM but it never works. I believe it's because my phone's ROM is 3.14.531.1 which is the upgrade from T-Mobile. I wanted to know if it's possible to go to a back dated ROM to use the DFT_LEO_MAGLDR111 files. If not what do you people suggest.
Make sure you have HSPL installed correctly if not check this out
http://forum.xda-developers.com/showthread.php?t=611433
Once that's done you can either use an SD card build check this out
http://forum.xda-developers.com/showthread.php?t=881958
Or you can use a NAND build
http://forum.xda-developers.com/showthread.php?t=894423
It's got a video so it's pretty easy to follow
Before you can install HSPL3 you must downgrade your rom to one with an SPL which is not 3.03.0000 (which comes with the 3.14 ROM).
You can download the 2.10 or the 2.13 TMOUS ROM from links in the WinMo6.5 ROM section. or you can use your phone's IMEI number to download the 2.13 ROM from HTC's website * HERE *
If it's a TMO US HD2 then you won't have HSPL3.03 - you'll have HSPL2.10 which is fine to install HSPL2.08 over (you don't need to worry about downgrading your ROM).
If it has green & red call & end-call buttons then it's a US T-Mobile HD2. If not, then it's not.
Turn the phone off and turn it back on again whilst holding the volume down button. This will put the phone in bootloader mode, and will also show you the version of SPL that you have.
Tell us what that is and we can go from there.
Edit: To get out of the bootloader, either pull the battery or press the reset button under the battery cover
HSPL -> MAGLDR -> Flash NAND Android Rom
and flash magldr 1.12..it is available...1.11 is old
I'm going through this at the moment. I'm on Vodafone and I did simply 'update' using an earlier official ROM in order to get the right SPL.
Hi All,
I'm a nuuub to HTC and am struggling to get HSPL 1/2/3 on the handset.
I have been given the phone but its in spanish, unfortunatley i dont speak the language, so i tried to hspl but had a power cut, to restore the phone i had to ass stock rom and now when i try and re-add hspl it says that there is a problem with the rapi.dll
This i know nothing about so any help would be massivley appreciated
http://www.youtube.com/watch?v=71WDYfDg4sA
go to the HTC support and find your shipped ROM, flash via SD card, then run HSPL4 and select the 2.08 if you're going to use Android or WP7
go to the HTC support and find your shipped ROM, flash via SD card, then run HSPL4 software and select the HSPL 2.08 or HSPL v3.03........
for cooked WM6.5 also ok.
My HD2 is running Artemis v57 that is WM 6.5.5 cooked rom
At the OP just so everyone here will know. Put your HD2 into bootloader by holding the volume down button while powering on your HD2 this will bring up the multicolored bootloader screen, you will need to press the small reset button under the battery cover and close to the SD card slot to reboot hour HD2. Look at the writting there and tell us what SPL version you currently have. Also what model HD2 do you have? Is it the T-Mobile HD2 or the International HD2? A
Oops ignore me
orangekid said:
go to the HTC support and find your shipped ROM, flash via SD card, then run HSPL4 and select the 2.08 if you're going to use Android or WP7
Click to expand...
Click to collapse
Yes! this is the way...
Remember that you can choose also the hspl/spl 3.03 if you want to use a stock WM EU Rom!
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Abagnale said:
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Click to expand...
Click to collapse
While your Pbone is off hold the volume down button and momentaraly press the power (end) button this should make the bootloader come up (tri color screen). Once in bootloader plug your USB cable into the computer and phone. wait until you see USB in the white bottom bar of the phone screen and then run the RUU or exe wich ever one you have for the ROM you want to flash, this is for Windows Mobile ROMs only though.
If you want you can use a micro SD card to flash the ROM also. You need a 4G or smaller SD card to do this though the 16GB card that comes with the TMOUS HD2 generaly will not work but you can try it. Take and find the RUU_signed.nbh file in the Rom folder you have, it may not look exactly like that but it will have RUU and .nbh in it. Rename the file leoimg.nbh and copy it to your SD card and repeat the process to go into bootloader and as soon as you see searching appear on your phone screen release the volume up button and the ROM will flash it just might take alittle longer for the ROM to complete the flash this way as compared to using a computer to flash.
Thank you for you reply After several attempts I managed to get my winmo back on
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Abagnale said:
Thank you for you reply After several attempts I managed to get my winmo back on
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Click to expand...
Click to collapse
Yes you lost MAGLDR, HSPL, and CMR when you flashed the stock ROM. If bootloader is showing SPL 3.O3.OOOO then you are stock once again You can always be double sure of this by downloading HSPL 4and run it, when it ask you what version you want to install select 3.03.0000. The ones with SPL and the x.xx.0000 are all stock SPLs but 3.03.0000 is the latest stock SPL.
Thanks you've calmed me down
Abagnale said:
Thanks you've calmed me down
Click to expand...
Click to collapse
You are very welcome,happy to be of help.
Appreciation
Thanks so much for the 4g micro sd card suggestion. I was really starting to think I'd stuffed my phone. I had been trying to flash a stock rom using a 16g micro sd card & of course having no luck. So glad I found this thread, keep being a superhero
I have 448mb ram on my htc hd2 and I heard that it actually has 576mb of ram but it is not activated. I need 576mb of ram in order to install MAGLDR.
so can someone please help and tell me how to activate the 576MB of RAM
thanks in advance
Installed software on phone:
ROM: 3.14.405.2 (04666) WWE
RADIO: 2.15.50.14
HSPL: 3.03.0000
I need 576mb of ram in order to install MAGLDR
Click to expand...
Click to collapse
Not correct.
Magldr will activate the ram for you, you don't need to activate it in advance, and indeed if you did activate it (tmous based rom plus 2.08.50 radio or higher) then flashing magldr will remove the rom that activated it in the first place.
So long as you have a correct radio (2.08.50.x or higher) then magldr will work and the ram unlocked. Without the correct radio magldr wont start till you have flashed correct radio.
I have 3.14 rom and radio 2.15.50 would that work???
Where can I download tmous based rom plus 2.08.50 radio or higher???
hrpearl01 said:
I have 3.14 rom and radio 2.15.50 would that work???
Where can I download tmous based rom plus 2.08.50 radio or higher???
Click to expand...
Click to collapse
The radio you have will work, just flash MAGLDR and then flash CWM (look in the ROM thread foe CWM portition size) and then flash your ROM. Click the guide linked in my sig for more assistance, look for the two complete how to install Android guides I have linked at the top of my guide.
T-Macgnolia said:
The radio you have will work, just flash MAGLDR and then flash CWM (look in the ROM thread foe CWM portition size) and then flash your ROM. Click the guide linked in my sig for more assistance, look for the two complete how to install Android guides I have linked at the top of my guide.
Click to expand...
Click to collapse
But they is the same problem it freezes every time I flash MAGLDR (1.10,1.11,1.12)
it freezes on the white boot screen with htc logo, then I have to install the rom again. I have tried to install it many times.
please help,thnx
HSPL???
Sent From My Fingers To Your Face.....
i think it is normal for the device to get stuck on the htc splash screen after installing magldr...
this is because magldr is just a LOADER...your device still needs a ROM (which was removed when you install magldr)...after flashing magldr, you need to boot into magldr (turn on device and keep holding down the power on button until magldr appears). then, you need to go to the section in magldr for flashing a magldr compatible ROM. just read the stickies, you will find a guide in there that describes ALL of these steps in much more detail.
'
ASCIIker said:
i think it is normal for the device to get stuck on the htc splash screen after installing magldr...
this is because magldr is just a LOADER...your device still needs a ROM (which was removed when you install magldr)...after flashing magldr, you need to boot into magldr (turn on device and keep holding down the power on button until magldr appears). then, you need to go to the section in magldr for flashing a magldr compatible ROM. just read the stickies, you will find a guide in there that describes ALL of these steps in much more detail.
Click to expand...
Click to collapse
No MAGLDR is the ROM on the HD2 until it has a Android or WP7 ROM to boot. So until you give MAGLDR a ROM to flash your HD2 will boot straight into the MAGLDR menu and that is it. The OP is saying that MAGLDR is not even booting up.
At the OP if you have a 2.15.50.xx radio and HSPL 2.08 on your HD2 you should not be having a problem. But like Canontroutman said if you do not have HSPL 2.08 then this is probably your problem. I was under the impression though that if you did not have HSPL 2.08 that MAGLDR would not flash. Which now that I think about it sounds like what is happening to the OP. I just thought you would get a error message from the RUU.
Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!
had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE
Stock ROMS always save the day haha
Thanks brother
All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed