Database Users

[Q] Help with my MT3g 1.2 I think its bricked?

my phone wont come off the the spalsh screen, even when i try to bootinto recovery or fastboost its just stuff on the green screen and the pixels are funny for some reason. i dont know exactly what i did but i tried to flash a new radio and spl is there any hope?

itsomaryo said:
my phone wont come off the the spalsh screen, even when i try to bootinto recovery or fastboost its just stuff on the green screen and the pixels are funny for some reason. i dont know exactly what i did but i tried to flash a new radio and spl is there any hope?
Click to expand...
Click to collapse
You can't get into bootloader at all?
If you can't get into bootloader or recovery then yes... you are bricked.
What did you do?

im not trying to hijack this thread but i didnt want to create a duplicate. mine also gets stuck on the splash screen. It wont load my recovery files and the adb interface on my computer wont work. im at a loss. Previously it was rooted with cyanogen mod 6.0

bassdroid said:
im not trying to hijack this thread but i didnt want to create a duplicate. mine also gets stuck on the splash screen. It wont load my recovery files and the adb interface on my computer wont work. im at a loss. Previously it was rooted with cyanogen mod 6.0
Click to expand...
Click to collapse
can you get in to the SPL? (vol - and power)

AdrianK said:
can you get in to the SPL? (vol - and power)
Click to expand...
Click to collapse
yes. i can do vol- and power and the white screen comes up with radio and spl showing.

I don't know what did but I fixed it. All I did was keep trying to flash the newest cyanogen rom and I wiped all caches and somehow it finally took I am sending from it now. But my hd2 will still remain primary phone
Sent from my HTC Magic using XDA App

I did it through the h boot and installed zip from sd card
Sent from my HTC Magic using XDA App

How did you do it?
bassdroid said:
I did it through the h boot and installed zip from sd card
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Hello,
How did you do it? I cannot pass the splash screen but I can enter the FASTBOOT menus with the 3 skaters
Thanks

All I did was wrote every cache and try installing a fresh rom a few times and somehow it worked. I was kinda surprised myself.
Sent from my Nexus One using XDA App

my solution on 10 second your magic will be alive (100% PROVEN & TESTED)
if u have problem with your magic (stuck on logo screen) maybe my solution it's work...
pls see this video make sure you condition same like this
youtube.com/watch?v=hPoxMzm0MVU&hd=1
Pls follow my sollution (it work on my magic) for fix your magic first u don't panic because your magic will be have the recovery on the internal disk. u should be only recovery rebort your magic to earlier condition before your magic stuck on logo boot screen.
1.put off your magic battery (5 second) then put on again.
2.pls hold home button and then hold off button (power on) "until u see the screen cyanogen recovery bootloader" and then it's automaticly booting and pls chooses rebort recovery then recovery will started.
3.after that your magic freezed on recovery clockworkmod.
4.put your battery off on your magic and put on again.
5.your magic will be back alive
pls responsed my solution

[Q] problems flashing roms

I am having trouble when I try to flash a new rom.
I have a HTC mytouch 3g 32b
I can install the rom fine (as far as I know), but when I reboot the phone it goes to the first splash screen with the green background and my touch logo. It will stay on this screen for a while, then it will reboot itself and go to the same screen for a while and repeat the loop until I pull the battery.
I can boot into recovery and restore the phone.
What can I do so the phone can boot into the newly installed rom?

shoe02 said:
I am having trouble when I try to flash a new rom.
I have a HTC mytouch 3g 32b
I can install the rom fine (as far as I know), but when I reboot the phone it goes to the first splash screen with the green background and my touch logo. It will stay on this screen for a while, then it will reboot itself and go to the same screen for a while and repeat the loop until I pull the battery.
I can boot into recovery and restore the phone.
What can I do so the phone can boot into the newly installed rom?
Click to expand...
Click to collapse
Try a wipe and fresh installation.
Could be your spl/radio.

How to get rid of the Tmobile logo

This is rather a simple question..
I've flash a custom rom on my HD2.
I've also hpsl
I Just did nand andriod...
Every time i boot my phone, it gives the Tmobile logo (US)
how do i get rid of that....
Thanks.

Flash the attached file via HSPL. (Vol-Down -> Boot -> Connect USB -> Run "CustomRUU.exe" )

sshaikh01 said:
This is rather a simple question..
I've flash a custom rom on my HD2.
I've also hpsl
I Just did nand andriod...
Every time i boot my phone, it gives the Tmobile logo (US)
how do i get rid of that....
Thanks.
Click to expand...
Click to collapse
You could flash a custom splash screen.
My understanding is that the first splash logo for NAND Android is still the WM splash, which can be changed by flashing a splash screen.
Check out my sig for some EnergyROM-specific splash screens or the WWE splash screen. Or, you could send me an image via PM, and I'll make the custom splash screen for you.

Flash a splash screen...
Sent from my HTC HD2 using XDA App

is there a way to install android in my htc hd2

Hello there;
I accedently wiped my htc hd2 using tak29 thinking I would be able to download android latest version. Now I wiped it completely and all I can get are three different sceens:
1- when I power it on I can get the white scree with htc logo and it stays still till I power it off.
2- when I power it on and hold it down simultanousely with vol down it takes me to the blue+green+white screen and usb script underneeth.
3- If I power it on and holds power on simultanousely with vol down and up I can get to factory reset but it wont do me any help.
Could you please tell me wher to go from here;
Thanks alot

http://forum.xda-developers.com/showthread.php?t=893948
Sure this will help you.. when I was a newbie I followed this guide to flash.. any doubt ask me
Sent from my HTC HD2 using xda premium

- Flash clk/magldr
- Flash cwm
- Flash a rom using clk.

yz.hd said:
- Flash clk/magldr
- Flash cwm
- Flash a rom using clk.
Click to expand...
Click to collapse
^ And by cLK he means CWM

Thank you sam for your reply.
I seemed to get lost. I carfully read your scripts and downloaded them and extarcted them up but no avail. I stuk on the begining of the steps where it says "FLASH YOUR HTC HD2 WITH MAGLDR" The line shows 0% and nothihng changed. Would you mind if If you give to me in setps but very refined.
Thanks.

My apology sam.
It worked fine with me second time after I first installed "HARDSP"
Thank you so much.

Ya.
Downgrade to HSPL 2.08 and you have the ticket to Android.
HD2 Toolkit is your best friend.
What ROM do you use now?

HTC HD2 stuck on white HTC screen

I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?

Superdod said:
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Click to expand...
Click to collapse
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.

shanman-2 said:
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
Click to expand...
Click to collapse
Thanks for the tip, but nothing happens while I am holding the buttons.

Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.

shanman-2 said:
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
Click to expand...
Click to collapse
Thanks, though I think I'll stay on windows for today x)

Try flash a different ROM and see if it works, if an alternative ROM works it could be a problem with the previous ROM or the settings you used within the phone e.g. might of missed a step or done something like partition sizes or something of that nature.

Superdod said:
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Click to expand...
Click to collapse
I'm not exactly sure what's going wrong, but something isn't installing correctly. Task 29 wipes your phone so you have nothing (aka the white screen you're talking about) try rebooting your computer and then go and install clk again. If everything works correctly it should work.
shanman-2 said:
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
Click to expand...
Click to collapse
This is true, but it won't work for him because he has no clk or recovery installed to boot into.
shanman-2 said:
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
Click to expand...
Click to collapse
+1
parker09 said:
Try flash a different ROM and see if it works, if an alternative ROM works it could be a problem with the previous ROM or the settings you used within the phone e.g. might of missed a step or done something like partition sizes or something of that nature.
Click to expand...
Click to collapse
No. To install a ROM, it requires a boot loader and recovery to be installed. Because he doesn't have either installed yet, this is not applicable.
Sent from my Galaxy Nexus using xda premium

Ah yeah, my mistake, was thinking green HTC logo