Hi,
Anyone knows where to find HTC Legend Power and Volume flex cables?
I have a completly working phone apart from this two little pieces.
I searched eBay and a lot of online stores to no avail.
Bye.
Come on.
No one knows??
Related
I had a crack at replacing the digitiser in my Tattoo and broke the volume control connection in the process. All else seems to be OK but alas, no display on boot up. Phone vibrates and makes noises but that's it.
So if anyone has a Tattoo good for parts or a link to parts supplier web site that would have what I want then Yippee! Let me know.
Also, any clues on replacing the volume control buttons?
ausmaniac said:
I had a crack at replacing the digitiser in my Tattoo and broke the volume control connection in the process. All else seems to be OK but alas, no display on boot up. Phone vibrates and makes noises but that's it.
So if anyone has a Tattoo good for parts or a link to parts supplier web site that would have what I want then Yippee! Let me know.
Also, any clues on replacing the volume control buttons?
Click to expand...
Click to collapse
For spare Parts try:
http://www.tradevv.com/vs-htc-tattoo-parts/
http://www.htcrepairparts.com/htc-tattoo-c-114_129_559.html?language=en
djemm1996 says in a Thread that HTC changes Buttons for ~25$
http://www.htcrepairparts.com/htc-tattoo-c-114_129_559.html?language=en
When i disassemble my hd2 and then reassemble it does the whole housing have to be on it before it will power up? Because i recently purchased a LCD + Digitizer combo and watch the video on how to fix it and did. Now when i go to power on my HD2 without the back housing on it just vibrates and no screen turns on?! Can anyone tell me what maybe the problem =)
Check the wiring again.
Sent from my Nexus One using XDA App
Hi. My touch keys menu and back is not working, home key works. Menu and back sometimes work,mostly dont. I tried all ROM and kernels version but not improvement. I think keypad ribbon flex cable is broken GENUINE-SAMSUNG-KEYPAD-FLEX-RIBBON-CABLE??
Yesterday i opened phone and now i have low signal range.
I wonder is why my buttons dont work can it be related to flex ribbon cable malfunction?
sorry, dont know if it is related to flex ribbon cable malfunction?
But my advice is you should send the phone to Samsung for repair and not attempt repairs on it yourself.
Of course if you have the skill then you should try yourself but if you are covered under warranty then you should get it repaired.
Best of luck!
Thank you for your time.
I am from Montenegro, there is no one here who could do it.
I ordered keypad flex cable, i will try with it. If anyone has any suggestions let say
That glue used for bonding parts of the phone? Display a little air...
I have to paste his display and menu and back keys.
That glue I use?
I replaced the flex ribbon cable but menu and back is not working! Maybe touch is not working?
So i bought a used HD2 so i could get rid of my Aria and do a dual boot
The digitizer was bad so i bought that as well as a new screen, replacing it the main flex ribbon that connects to volume port broke which is unrepairable and the pcb where the flex connects to the socket lid broke half way when removing the tape so dang fragile.
But the ribbon still goes in and it still closes, so the main issue is the flex ribbon with the broken volume button.
So my tech is an idiot. But i really want to use the HD2. Is there somebody that has those parts and can fix it?
I already spent $65 on the digi and screen so i feel
Yes go onto ebay and look for hd2 side volume key pcb.
It's a lengthy repair but nothing too difficult if you like electronics.
http://www.ebay.com/itm/New-OEM-HTC...ultDomain_0&hash=item1c21fcc331#ht_1766wt_964
found it, should have some fun now
The power button on my U8800 doesn't work because when replacing the digitizer the ribbon calbe part inside that works as the power button/LED light tore, the tear just about stops at the light which still works but obviously I want to be able to use the power button more than anything, anyone know where I can get one or have one spare? maybe from a broken U8800.
Same here, I only tore up the LED light,so at least the power button is working!!
Did you find anywhere the replacement ribbon cable??? I've been looking all over ebay but nothing.
nrapel said:
Same here, I only tore up the LED light,so at least the power button is working!!
Did you find anywhere the replacement ribbon cable??? I've been looking all over ebay but nothing.
Click to expand...
Click to collapse
Sadly not, I found there's a method of using a conductive pen but they cost £20 but I'm thinking of trying a solder wick over the connectors which might connect them up.