I just installed RubiXFocused 1.8.6 yesterday. I installed it by booting into Clockwork Recovery (I think that's what it's called) and installing the zip file. It is a brand new ROM for the Droid X and I am very happy with it. The only thing is that it has a white status bar and I think it would look a lot better with a black one.
I looked online and found that the easiest way to do this would be through ROM Manager. So I got ROM Manager and tried to install Blackmodz Black Bar. Everything works until it reboots and tries to install the update. About halfway through I get an error showing a triangle with an exclamation mark inside and the android next to it. And then the phone reboots with no update.
I am in bootstrap recovery when I do all of this. Any help??
That black bar that you are trying to install is not compatible with Rubix at all. Rubix uses a completely different framework. When you try to install that black bar- it is trying to replace the Rubix framework-res.apk. Thankfully you were "unsuccessful".
Might I ask- are you keeping up with the thread on Rubix 1.8 over here...
http://www.droidforums.net/forum/drod2169-x/97764-often-imitated-never-duplicated-focused-1-8-6-a.html
...it is very helpful and you will be able to find modifications that work in this thread. Now that you are running RubiX you must be careful with any mods that you do to your X bc Rubix is using a framework-res.apk that is unique to the Rom and not shared with any of the other roms or the original Moto rom. that means most mods need to be specifically designated for rubix 1.8.
hope that is helpful and didn't come off sounding superior. I hate being talked down to but noticed that inadvertently I can sound that way.
good luck.
Not at all. thank you so much for your help. I had not seen that thread and it is super helpful.
Butterandguns said:
Not at all. thank you so much for your help. I had not seen that thread and it is super helpful.
Click to expand...
Click to collapse
Can someone please let me know rubix 1.8.9 is more stable than 1.8.6 ? I have a rooted droid X running OTA 2.2. I have YET to install a custom ROM, and am a little apprehensive, as I do NOT want to BRICK my phone. Also, can someone please verify the correct procedure to install a custom ROM. I have Clockwork Recovery Manager installed, as well as Koush's bootstrap for DX. I believe I have to boot into Clockwork Recovery and perform - wipe data/wipe cache, and then install zip from SD (once I put the ROM zip file on the SD).then sit back and let install..continue..Am I missing something? Thanks for any help/advice.
I have a question. I downloaded and used Droid 2 Bootstrap Recovery after rooting and before ROMing my Droid 2. Now I need to download and use ROM Manager to get an update to to the ROM I am using (Miui). When I go into ROM Manager, it wants me to flash CWM before doing anything. Since I already have CWM (thanks to D2BR) how would this affect it? I know it would update it, but would my back ups be saved and would it mess with D2BR? Thanks in advance.
*Droid 2 info in sig*
edit: Just realized that the back ups get saved to the SD card. So they'll be fine.
All those views and no answer yet? Come on, someone has to know something. I really want to download this update before the next release. Any help would be greatly appreciated.
I'm not sure if it would mess with anything. I would use Bootstrap to flash all my ROMs. Even the ones I download in ROM Manager. They will be in the "clockwork" folder then go to "download"
JDunc said:
I'm not sure if it would mess with anything. I would use Bootstrap to flash all my ROMs. Even the ones I download in ROM Manager. They will be in the "clockwork" folder then go to "download"
Click to expand...
Click to collapse
The thread that's below mine (at the moment) had issues when flashing CWM from ROM Manager after using Bootstrap. That's why I am a little nervous about doing it. *Turns out he used RM first then bootstrapped. That could be the problem.*
Yeah, I would of used Bootstrap to flash it, I just need ROM Manager to actually get it. Would I need to clear the cache first? Thanks for the help.
edit: Guess I'll give it a shot, see what happens. Will update.
Took the plunge. No problems. Was able to successfully update Miui. Thanks for the help.
Hey guys, I just wanted to share my experience so far. I can't post on the MIUI page because I don't have enough posts, so I'll share here for anyone interested.
For anyone wanting to try MIUI for the DX, here's my experience, some tips, and suggestions.
-Beware, installing or trying to install ANY ROM may brick your phone. although it's very rare and unlikely to be unable to find a solution to problems, it can and has happened. so take caution and read instructions and so-forth carefully.
Some history of my DX. I soft-bricked my phone back in the early months of the DX trying to deodex it to install themes. It was stuck on M logo for 2 days before i learned enough from scratch to find out what an SBF was, where to find it, and how to flash my phone back to stock. Ever since then these nice folk on XDA-developers forums and other droid forums have helped me successfully mod my phone many times, through Q&A, detailed instructions, and a little luck.
I've rooted my phone using the command method, Z4Root, and several other processes. Some were hard to figure out, some soft-bricked my phone, most were easy as pie. I'm on a Z4Root atm.
The first successful ROM I installed was GUMMY-JAR. I liked it, it was good to me. nothing like the comprehensive ROMs out now though.
Then I jumped to Liberty 1.5, Liberty x.x etc... Liberty was awesome, but was still basically Froyo with advanced options. I loved it.
Now, just today, I've installed MIUI. And let me tell you, its amazing!
For anyone running Froyo Liberty ROMs, I believe that you can install MIUI right over the top. I didn't think it was going to work, as I hadn't seen anyone mention if it did or not over the top of Liberty 1.5.
If you want to install MIUI, go here. http://forum.xda-developers.com/showthread.php?t=1181486
You MUST be rooted, and be running FROYO, NOT GB! You must also have the Droid X bootstrapper.
I won't give instructions, as I'm not qualified to do so. But I can tell you what I did from Liberty 1.5. MAKE SURE TO MAKE A BACKUP FIRST! 1) I downloaded the MIUI ROM from the above XDA post to my SD card on my phone. 2) I clicked 'bootstrap recovery' on the DX bootstrapper app, then 'reboot recovery.' My phone booted into clockwork recovery mode. 3) wiped data/factory reset. 4) cleared cache. 5) install from SD Card. 6) install MIUI.zip i downloaded from the link i posted above. let it run it's course. rebooted. DONE.
It's really that easy if you are running the DX stock Froyo kernal.
Keep in mind with MIUI, it does NOT auto-sync your Google account. you need to go into the options>>accounts/sync and add your Google account. You can then re-install apps from your backup or just re-download them. Make sure you've synced your contacts with your Google account so they will be there when you add your Google account.
Some thoughts on MIUI...
There is NO STOCK APP DRAWER. I recommend ADW launcher or Launcher PRO. The MIUI launcher inst bad, but it's like iOS in that there's no app drawer. It's just a bunch of screens with all your app icons like an iPhone.
You can download theme's and customize themes through settings>>personal>>theme manager. MIUI allows you to change fonts, boot animation, boot audio, lock-screen style, status bar, icons, launcher, wallpapers, text style, dialer style etc. There's tons of pre-made packages, but you can also change them all individually and create one you like best. You can do all of this directly from the settings menu including looking up new themes, downloading them, and applying them.
MIUI is running on 2.3.4 GB. So it wont say 2.2 anymore after you install. (I believe the kernal is still Froyo though? Please correct me if I am wrong)
I really hope this helps some of you newbies. I am thankful for all of you that have made posts like this that I have found useful in the past.
Note- some people are having issues installing MIUI. They are getting bootlooped on the M logo for some reason. I have no idea why this is, it worked perfectly for me first try. Just remember to follow the instructions on the ROM page, and that you are running the correct version of Android. You shouldn't get a boot-loop if you do so.
Hope this helps!
i have a question.... and this question is what will decide if i keep this or go back to liberty gingerbread....
how the hell do i flash anything.. i can't even install clockwork mod without getting bootloops.... and i'd love to flash certain apps onto this.... but if this can not be done i will have to go back.... the only thing going into recovery does is use the retarded original recovery... and that is a big deal.. if i ruin my phone on the go and need to pullup a backup i can not do this with this rom and i will end up phoneless until i can get to a computer to sbf
nosboost300 said:
i have a question.... and this question is what will decide if i keep this or go back to liberty gingerbread....
how the hell do i flash anything.. i can't even install clockwork mod without getting bootloops.... and i'd love to flash certain apps onto this.... but if this can not be done i will have to go back.... the only thing going into recovery does is use the retarded original recovery... and that is a big deal.. if i ruin my phone on the go and need to pullup a backup i can not do this with this rom and i will end up phoneless until i can get to a computer to sbf
Click to expand...
Click to collapse
What exactly are you asking? "Flashing" is the process of basically overwriting your current Android OS with an Android OS SBF. If you are trying to install MIUI, you cannot do it with Gingerbread installed on your phone. "You MUST be on CyanogenMod 7 or .340 Froyo to flash this rom!" (MIUI)
If you want to install MIUI, i think the best bet would be SBF flashing to stock DX 2.2 .340 FROYO, re-rooting, then using the DX boot-strapper to boot into recovery. Then installing the MIUI .zip from SDcard in the recovery menu. Everything should work fine after that. Rmember you CANNOT go into recovery using DX boot-strapper once this ROM is installed. you CAN go into recovery with this ROM using ROM-manager. This is what I have experienced so far, and what others have said also.
no.. i already have the rom installed... i just want to be able to go into recovery without needing to be booted up.
i'm trying to install some zips through clockwork such as the old blur camera and a few other things... i will install rom manager and see how it goes from there... i love the UI of this rom but as far as being comfortable and stable.. liberty gingerbread has my vote as of now
i've cleared my cache and data several times and i get force closes alot. and this is a clean install coming straight after an SBF.
with liberty gingerbread i had the ability to set it so every phone reboot, even if a battery pull, would boot directly into clockwork mod.. making it easy for me in case i installed a zip that would get me into bootloop
Hmm, sorry mate, I dunno what to tell ya. Try looking aroudn forums or startign a new thread. someone more knowledgable than you or me will help you out.
thanks for everything though!! this really is a beautiful rom and i'd love to stick with it... i'll bite the bullet for the meantime and post around to get some help... i'd love to post in the developer section but i don't have enough posts yet.. haha
nosboost300 said:
no.. i already have the rom installed... i just want to be able to go into recovery without needing to be booted up.
i'm trying to install some zips through clockwork such as the old blur camera and a few other things... i will install rom manager and see how it goes from there... i love the UI of this rom but as far as being comfortable and stable.. liberty gingerbread has my vote as of now
i've cleared my cache and data several times and i get force closes alot. and this is a clean install coming straight after an SBF.
with liberty gingerbread i had the ability to set it so every phone reboot, even if a battery pull, would boot directly into clockwork mod.. making it easy for me in case i installed a zip that would get me into bootloop
Click to expand...
Click to collapse
You need to install Rom Manager, and select flash Clockwork Recovery. Make sure you select Droid X (2nd Init). Then you can reboot into recovery with Rom Manager :-D
laxattack said:
You need to install Rom Manager, and select flash Clockwork Recovery. Make sure you select Droid X (2nd Init). Then you can reboot into recovery with Rom Manager :-D
Click to expand...
Click to collapse
but the problem is that i would like to be able to go into recovery without having to do it through an app... i'd like to make it so every reboot (including battery pull) makes it boot into recovery. thats how i had liberty gingerbread doing it... if not.. i can live with it.. i'll just be a little more careful on what i'm installing
Just wanted to chime in about MIUI rom, I just flashed it yesterday and am ABSOLUTELY loving it thus far. I had no trouble at all installing the rom what-so-ever. I used ROM Manager to do the whole thing: downloaded newest ver. of MIUI, backup current ROM, wipe data and dalvik. Let it run its course and it rebooted and was up and running in no time flat!
hello... i've just installed this rom and i'm havin a bit of trouble with a few things. 1.... i have no idea how to get my previous version of swype installed on this.... i would like to install the swype i had from liberty gingerbread v.9 .. i've found the old .apk i had but i don't know how to get it running.. it force closes before i can even see the keyboard after install.
and aside from that.... does anyone know how to get a more permanent recovery loader going on?? i'd like to be able to access recover without having to boot into my rom first
did you ever figure this out?
I went to the swype beta page signed up and downloaded the newest version of swype. It works just fine for me.
As far recovery, I think you just hold down vol down and camera or vol down and home to get into recovery. I know there is a trick to getting into if from the miui ROM. You can't use the reboot option in ROM manager. You have to hold down power off, use the restart option, then reboot CWM
I've been using NexusHD2 v1.9 nand with no issues at all. I downloaded a few gingerbread roms and everyone is missing notification bar/clock/etc. I feel like i need to flash something coming from froyo to GB, but all the zip files i download don't have a installer or flash file within the zip file.. I'm using MAGLDR and CWM recovery. I also use Launcher Pro but even using stock launcher, same results.
any ideas? Thank You!!! this is frustrating...
i had similar probleme with market missing after installing the rom ...install titanium backup ...and serach for notification bar u might find it frozen ...just infreeze it and reboot.
hmm... didn't seem to help but thanks...