im having problems with installing magldr or any rom to my phone... it goes through rom version check and everything but then when it comes to flashing it pops out window with error 266(cant get response from the device) I have HSPL 2.08 and correct radio installed. Im pretty sure because its not the first rom im trying to flash. phone is comunicating with pc because i can update SPL without any problems... i dont know what to do? can anyone help me?
Related
Hi I'm new on here and a complete novice to flashing roms. I have a HTC Leo which I'm trying to switch to android but can't get Magdlr 112 onto my phone, I get through the first couple of pages it says it's uploading,I get the tri colour screen then grey htc screen but sticks at 0% then after a couple of minutes says error 260 and that it can't connect to the device. Any help would be great I'm wary of trying anything else because of the warnings of people on here about bricking it.
Ollyisagudun said:
Hi I'm new on here and a complete novice to flashing roms. I have a HTC Leo which I'm trying to switch to android but can't get Magdlr 112 onto my phone, I get through the first couple of pages it says it's uploading,I get the tri colour screen then grey htc screen but sticks at 0% then after a couple of minutes says error 260 and that it can't connect to the device. Any help would be great I'm wary of trying anything else because of the warnings of people on here about bricking it.
Click to expand...
Click to collapse
Do you already have HSPL flashed to your phone? It sounds like the bootloader is stock and is preventing you from flashing custom code to your phone. Are you running a custom or stock ROM at the moment?
Stock win 6.5. It's as it came from the provider which is Virgin.
Ollyisagudun said:
Stock win 6.5. It's as it came from the provider which is Virgin.
Click to expand...
Click to collapse
That's why. You need to have HSPL first. Please read this thread very carefully and follow the instructions to the "T".
Nearly there
Right I've put an old 1.48 version on my phone managed to get HSPL2 on to it, but am struggling with Magldr 1.13 can get it to load on but then the phone won't boot it sticks on the white screen with HTC but goes no further (no quietly brilliant) I can get the tri colour boot loader but it won't load Magldr I've tried a couple of versions but to no avail any help would be appreciated so close to getting Android on it, I'm about to start again from scratch. Cheers
What radio version do you have? You need 2.08.hspl AND the correct radio - 2.08.50.xx or higher x.xx.50 radio.
Radio version 2.05.51_2
boot loader shows SPL-2.08.HSPL 8G XE
0x05
0x50
Well there's your problem then
Heh guys you was faster.
Sent from my HTC HD2 using Tapatalk
When I try and flash a custom rom I'm getting an error message I've tried two different roms. Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
The phone is in flash mode and says Wait USB...USB
I can flash an official rom back onto the phone but not a custom rom?
Solution found active sync needed to have it's usb connection disabled.
Thanks for all your help I'm rocking Froyo and soon Gingerbread.
Yes radio will solve the problem of getting stuck on white HTC screen after installing magldr.
Boot to bootloader mode, connect to pc, when usb shows run the CustomRUU in the radi ofile you downloaded. Ensure it is a 50 not 51 series radio. You can try 2.15.50 (see link in my signature). If the download doesn't have a CustomRUU.exe file included then you can use one from any winmo custom rom.
Got the radio version cheers all good, best Gingerbread rom? Or should I stick with froyo? Version I have of gingerbread won't load can't find the usbError Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
?
Read the FAQ section here
As to the best rom that is a matter of personal preference. I don't like GB as I prefer Sense, but tastes vary.
Before I get started, I've flashed 4 different roms onto my phone before along with flashing the radio and installing Magldr, so I can't quite figure out what I'm doing wrong this time around
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Alright, I've set my phone into the bootloader, got an active connection and ran the CustomRUU.exe for both radio version 2.15 and 2.14.50 and for some reason, when completed it doesn't seem to have updated my radio. The program finishes and completes with no errors, but when I go to check in the tricolor bootloader, it's still version 2.08?
My ultimate goal is to get this ROM installed http://forum.xda-developers.com/showthread.php?t=917590 CleanDROID v2.51 - Froyo+CM
Now it says to update my radio to at least 2.12 but I don't know why it's not updating? And because of this, I cannot seem to flash the rom. When flashing the ROM, i am approached with this error:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
I have no idea what's going on or what I should do. I don't exactly see what I'm doing wrong or what steps are missing. I've never had so much of a hassle with rom and radio flashing before, it's aggravating me and I must figure it out lol!
Thanks in advance for all the help
efeguwewe said:
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Click to expand...
Click to collapse
Firstly despite being on d right path, u've got ur info slightly wrong.
"SPL-2.08.HSPL 8G XE CotullaHSPL" is ur installed HSPL & NOT ur radio version...Assuming u were still running WInMo, u would have noticed d change in radios u flashed at the bottom of the TMobile boot-up screen...Rest assured there r no major problems here cuz it appears u've already installed d radio...
***You've Performed HSPL and installed MAGLDR 1.13....so Good.
***You also performed a CWM install but the ROM thread u posted is not a CWM build....Meaning it's a DFT build and does't need CWM installed.
Nw here's what u'll do.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
P.S. Flashing a dft build will remove ur cwm installation...its a known fact dat both cannot co-exist.
I installed CWm because I was planning on flashing this ROM: http://forum.xda-developers.com/showthread.php?t=933951
But I gave up because I kept on getting the following error as well:
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Click to expand...
Click to collapse
Same numbers and text
How can I check what radio I've flashed? Also, I don't think i have WinMo installed anymore as my phone just boots straight to MAGLDR after failing to load a android nand (but how can it when none is installed lol).
Since I've gone through the CustomRUU.exe for both 2.14 and 2.15, do I already have the radio flashed? Nothing went wrong and the process was completed
I've already done everything you posted before my original post, I just on getting those .RSPL errors.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
Click to expand...
Click to collapse
Tried it your exact way and I still get the .RSPL error
anybody have any idea what I should do?
efeguwewe said:
anybody have any idea what I should do?
Click to expand...
Click to collapse
Hmmm...Try this then.
Perform a Task29.
Flash a 2.15.50.14 radio.
Install MAGLDR 1.13.
Install CWM...(If needed & Paying attention to which particular clockwork partitioning system will work for you desired build).
Re-download the android build..(cuz i think some files might ave messed up while downloading).
Find an alternative means (e.g. thru sd card readers / thru CWM's mount storage system) to transfer the zipped build to ur memory card...Avoid using MAGLDR's inbuilt usb mass storage utility as its been reported 2 have a few issues during transfers.
If u also have a TMobile HD2, u might be interested in d build i'm currently running..It supports CWM n flashing it and or updates ave never given me issues.
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
nizaamh said:
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
Click to expand...
Click to collapse
Do you still have 2.08.hspl installed? Go back to bootloader and check it.
hello, i have magldr 1.12 and im having issues installing 1.13... im in bootloader mode running the magldr installer everything goes well... it comunicate with my phone because it goes trough the version check but when it comes to installation it goes wrong and the error window appears... i dont know what can be wrong... i have HSPL 2.08 installed... thanks for the help
I need help....
I am trying to install Android but I noticed I have SPL 2.10 and when i am tryin to install any version of Magldr I keep getting error message.
I have tried DL Version 1.11 and 1.13 and it gets stuck on the loading screen and then get the error Message.
Can anyone Help me please.
My HD2 with windows just keeps on freezing up on me constantly and I really luv this phone so I want to install Android....
HELP!!!!!
You need to flash hspl 2.08
Sent from my SGH-T959 using XDA App
Once, I flash that then I can Install any version of Magldr???
I will try that and let you know.
Thanks....
Yeah you need HSPL 2.08.HSPL ]
You can then flash anything you want from there like radio's, WinMo custom ROM's, MAGLDR and cLK. Make sure you choose 2.08.HSPL and not 2.08.0000 from HSPL2/3/4 on your PC.
Problem solved. I was able to flash HSPL 2.08 and I now have Android on my phone...
Thanks a bunch to all for your help...
THANKS!!!!!!!!!!!
hello ... uhm, i was ... what i was!? ... well, i tried to return my phone from hspl to ospl version, i flashed magldr and android to windows stock rom, but, when i tryed to flash it from hspl to spl i did this :
- Extracked 'Ruu.signed.nbh' and changed it name to 'leoimg.nbh' than i copied it to my sd card and then i tryed to hard reset my phone ...
- The loading screan was activated and tryed to update something, but then it crashes and now i cant do anything .... i can't flash anyrom, any spl, any bootloader ... it always says that 'Software wasn't updated' (or something like that) .... it seams like its locked ...
so, pls, help me to fix this thing.... thx XDA gods ^_^
We know you're worried, but you have given no details at all,, what model hd2, what stock rom you flashed, what spl shows in bootloader(don't assume you know, check it visually again now) what exactly "the loading screen started..... crashed...blah blah" actually means.
Details details details.
oh god, how rude of me ... well, im useing htc leo hd2 t8585 and i have stock rom windows mobile 6.5 //3.14.405.2// now, but before that i had android 2.3.7 gingerbread 1.1.3 magldr and 2.08 hspl ... i sucessfully removed android and magldr but hspl remains the same .... than, i tried to remove hspl with ospl and when i try to hard reset my phone i see loading screen of ospl but then it pops 'Not allowed' screen .... like its locked or something .... and when i try to boot my phone it stucks again there and redirect me to HSPL picture (u know those colors) and pops the message 'rom update is not finished, try again later ' ... i know it sounds ****ed up
Run Hspl4 with phone in bootloader, choose 3.03.0000, flash stock rom again. If you still get errors you aren't using the correct stock rom for your region/provider.
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
aaki_rocker said:
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
Click to expand...
Click to collapse
That's dangerous advice without checking if its deff not a tmous. LOADS of tmouses have been bricked by the owner trying to get to spl 1.x
Just cos he said its a t8585, it wouldn't be the first time a tmous user has referred to it as an 8585