Hi Guys,
Stupid question probably, but I could not find a clear answer (you will bump me now with several links ).
I have win 6.5 on my HD2, I’am running Darkstones RAM Android build.
I want to experiment some more, but at this moment I boot my WM6.5 and then run Haret to get to Android.
What does change in this process when I install MAGDLR 1.13?
As far as I read about it , it is an additional step in the booting sequence that you can activate by holding the volume down button.
Does it mean when I do “nothing” on a reboot, my WM6.5 starts and I can still go to haret to start android and…
When I hold the volume down I can start android directly from MAGDLR (..to SD)
Thanx for some clarification
Bazzz66 said:
Hi Guys,
As far as I read about it , it is an additional step in the booting sequence that you can activate by holding the volume down button.
Does it mean when I do “nothing” on a reboot, my WM6.5 starts and I can still go to haret to start android and…
When I hold the volume down I can start android directly from MAGDLR (..to SD)
Thanx for some clarification
Click to expand...
Click to collapse
No .. IF YOU INSTALL OF MAGLDR And ClockworkMod Recovery ..
You Will NOT Have WM6.5 Anymore !
It Replaces WM6.5 .. You Will no longer be able to duel-boot WM6.5 and Android.
Install MAGLDR And ClockworkMod Recovery and android ...
When Your Phone boots .. It Will Automatically Run Android.
Thank you, that was all I needed to know.
Now I can start reading if I do this how I get back
Regards
Related
Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
Hello everybody
I installed the beta version of the gingerbread, the first which came out on the XDA. Now my problem is that I can't use the USB or GPS and i want to get the new gingerbread version, but i can't do that because my usb doesn't work.
The magldr doesnt startup when i turn on my phone. When it starts
It's loading something and then i counts 1...2...3... GOGOGO, and then i booting up to the android.
But in always keep booting instead of giving me the menu.
it's malgdr v1.13 which is installed.
Can anybody help me??
I'm in big trouble...
Thank you all!
Poulsen7500 said:
Hello everybody
I installed the beta version of the gingerbread, the first which came out on the XDA. Now my problem is that I can't use the USB or GPS and i want to get the new gingerbread version, but i can't do that because my usb doesn't work.
The magldr doesnt startup when i turn on my phone. When it starts
It's loading something and then i counts 1...2...3... GOGOGO, and then i booting up to the android.
But in always keep booting instead of giving me the menu.
it's malgdr v1.13 which is installed.
Can anybody help me??
I'm in big trouble...
Thank you all!
Click to expand...
Click to collapse
Reported for being in the wrong section.
Sounds like you need to reflash a stock windows rom and start again. If you dont know how to do this i suggest you read the oficial magldr thread.
All you have to do is when you reboot hold the power button down it will bring you back into magldr. Also the next time you have a question use the Q & A section.
This information can also be found in the magldr thread ill post a link for you.
http://forum.xda-developers.com/showthread.php?t=893618
Sent from my Android Powered HD2 using XDA App
But when i hold down the volume button and i want to re-install the windows system it's just booting with the android again...
1...2...3... GOGOGO
Poulsen7500 said:
But when i hold down the volume button and i want to re-install the windows system it's just booting with the android again...
1...2...3... GOGOGO
Click to expand...
Click to collapse
Turn off your phone then hit the power button only hold it down until you see magldr. Don't hold down the volume button unless your trying to get into the boot loader.
a) Ask "questions" in the "Q&A" forum. (Common sense really).
b) Use proper titles that are descriptive of topic not something silly like "Help me!" (Also common sense).
c) Use search and read stickies before creating a topic that has obviously been discussed many times before. (Again, yes you got it common sense).
d) If you want the magldr menu, turn on phone and then press and hold power button when you see magldr and it will load up menu for you instead of booting into a kernel.
e) If you want to go into bootloader you hold down "Volume Down" after powering on untill you get the tri-color screen. You can then either flash via USB from windows or flash via SD card if you have a rom on your root of sd called "leoimg.nbh" (WM6.5 and Radio roms ONLY).
hello everybody,
i got a question about how to install windows 6.5 back on to my htc hd2 again..... i installed a android nand rom (ultimate on my phone the htc hd2)..
but i like the sd android install better (harret).
so my question is ..... how can i install windows 6.5 back on this phone again...
and which files i do need. and what to do.. cause i have NO CLUE!
i already want to thank you for re-directing me or helping me out!!!!
May I redirect you to the Q&A section?
8times0 said:
hello everybody,
i got a question about how to install windows 6.5 back on to my htc hd2 again..... i installed a android nand rom (ultimate on my phone the htc hd2)..
but i like the sd android install better (harret).
so my question is ..... how can i install windows 6.5 back on this phone again...
and which files i do need. and what to do.. cause i have NO CLUE!
i already want to thank you for re-directing me or helping me out!!!!
Click to expand...
Click to collapse
This is the wrong section to post this.... but all you have to do is pick out a winmo rom you want from the winmo rom section...here: http://forum.xda-developers.com/forumdisplay.php?f=534
I always used energy rom... it's one of the more popular ones and works well with android on sd.... here's link to energy thread: http://forum.xda-developers.com/showthread.php?t=591784
Once you pick out rom, then to flash, go to bootloader by holding the down volume button while you turn phone on. It should go to tri-colored screen. Plug into usb on computer. Wait for any drivers needed to install. Word on bottom of phone screen should change from serial to USB. Once it says USB, then run the rom update utility that's in the rom folder you downloaded and follow directions. And it'll flash the rom and you'll have winmo back.
It may be a good idea to task 29 it too, but it's not necessary. Search about task29 to learn about that, or read the sticky rollup threads at top of winmo rom section.
8times0 said:
hello everybody,
i got a question about how to install windows 6.5 back on to my htc hd2 again..... i installed a android nand rom (ultimate on my phone the htc hd2)..
but i like the sd android install better (harret).
so my question is ..... how can i install windows 6.5 back on this phone again...
and which files i do need. and what to do.. cause i have NO CLUE!
i already want to thank you for re-directing me or helping me out!!!!
Click to expand...
Click to collapse
It's very simple.
- turnoff your HD2.
- Press "volume down" and press "power key"----> you HD2 go to bootloader.
- Plug cable into PC and your HD2.
- open folder rom_stock and run "ROMUpdateUtility".
- about 5-10 minutes, your HD2 is WM6.5.
And what do you do if vol down and power key doesn't bring you to bootloader but to reboot ? and if vol- vol + power does'nt reset ?
aldai2 said:
And what do you do if vol down and power key doesn't bring you to bootloader but to reboot ? and if vol- vol + power does'nt reset ?
Click to expand...
Click to collapse
It means your HD2 is going broken down.
Not really : nandroid works fine !!!!
You have to turn off your phone first, then turn on pressing vol - and power key and release the vol- only after seeing the tri color bootloader
The same question...
I have tried to use HTC reset tool.
However, it is not successful.
First of all it has to be said that I´m a noob in this, it´s the first phone I try to flash Android on. I´ve been trying to put Android on my HD2 for a time now, without any luck. Probably it´s my phone´s problem but I can´t realize what´s going on.
First I´ve tried the SD method, but when I intend to execute CLRCAD.exe and haret.exe it gives me an error message about ¨signing with trusted certificate¨ and does nothing.
Then I went for the NAND Android. Here the problem is that my HD2 only connects to the PC with mass sotrage mode, cannot activate ActiveSync. It doesn´t recognize it.
Please, if somebody knows anything that could help me I´m waiting for suggestions.
Thanks in advance!
To get it to work with the WinMobile 6.5/haret method, search and install BsB Tweaks and change the security setting in BsB. BsB Tweaks is a WinMo app, look in HD2 WinMo 6.5 Themes and Apps forum for it.
To flash NAND, boot into bootloader to flash MagLdr without connecting via ActiveSync (reset your phone while holding the vol- button) Then you can flash CWM Recovery via MagLdr's USB Flasher option in the MagLdr menu (once mgldr is installed, press pwr button to boot, then hold pwr button to get the mgldr menu) From there, flash CWM roms via CWM Recovery (AD Recovery option in mgldr menu)
Sent from my HTC HD2 using XDA App
Thanks a lot! I´ve got it done flashing NAND. THANKS!!!!!
im having htc hd2 with winodws 6.5 , i used to install different different andriod version, but wat i hav problamatic like when i have to change my andriod nand to other one then i hav to insatll original windows 6.5 image first and then MAGDLR loader and then install the disered stuff , also MAGDLR not installing from andriod so its realy very long proccess for me to do this. is there any way to enter MAGDLR boot menu so i can flash my phone again
trilok31 said:
im having htc hd2 with winodws 6.5 , i used to install different different andriod version, but wat i hav problamatic like when i have to change my andriod nand to other one then i hav to insatll original windows 6.5 image first and then MAGDLR loader and then install the disered stuff , also MAGDLR not installing from andriod so its realy very long proccess for me to do this. is there any way to enter MAGDLR boot menu so i can flash my phone again
Click to expand...
Click to collapse
Hi,
If you re-installed an original WM ROM,you will have lost everything on your phone:
HSPL,MAGLDR, RADIO,etc.
You must start again.
Everything you need to do is listed in my sig...guide number 2.
trilok31 said:
im having htc hd2 with winodws 6.5 , i used to install different different andriod version, but wat i hav problamatic like when i have to change my andriod nand to other one then i hav to insatll original windows 6.5 image first and then MAGDLR loader and then install the disered stuff , also MAGDLR not installing from andriod so its realy very long proccess for me to do this. is there any way to enter MAGDLR boot menu so i can flash my phone again
Click to expand...
Click to collapse
Im not sure if you are saying that you cant enter the Magldr Menu when you boot up your phone or that you are going about installing Android incorrectly.
To get Magldr on your phone you start with Windows Mobile, then flash the latest 2.**.50.** Radio and then flash Magldr v1.13. When the phone restarts you can enter Magldr by long pressing the power button and then either install NAND Android OR install Clockwork Mod via Magldr which is the far better way to go.
With Clockwork Mod on your phone you can backup and restore Android Roms, flash and update Android Roms via a zip file copied to your storage card, clear caches and setup the A2SD partition on your storage card.
There is never any need to reflash Windows Mobile between Roms.
Take a look at the 2 Android flashing guides in my sig (especially the Clockwork Mod guide) which should help you alot with what you need to do.
Mark.