[Q] Help please with my HTC HD2! - HD2 Android Q&A, Help & Troubleshooting and Genera

First of all it has to be said that I´m a noob in this, it´s the first phone I try to flash Android on. I´ve been trying to put Android on my HD2 for a time now, without any luck. Probably it´s my phone´s problem but I can´t realize what´s going on.
First I´ve tried the SD method, but when I intend to execute CLRCAD.exe and haret.exe it gives me an error message about ¨signing with trusted certificate¨ and does nothing.
Then I went for the NAND Android. Here the problem is that my HD2 only connects to the PC with mass sotrage mode, cannot activate ActiveSync. It doesn´t recognize it.
Please, if somebody knows anything that could help me I´m waiting for suggestions.
Thanks in advance!

To get it to work with the WinMobile 6.5/haret method, search and install BsB Tweaks and change the security setting in BsB. BsB Tweaks is a WinMo app, look in HD2 WinMo 6.5 Themes and Apps forum for it.
To flash NAND, boot into bootloader to flash MagLdr without connecting via ActiveSync (reset your phone while holding the vol- button) Then you can flash CWM Recovery via MagLdr's USB Flasher option in the MagLdr menu (once mgldr is installed, press pwr button to boot, then hold pwr button to get the mgldr menu) From there, flash CWM roms via CWM Recovery (AD Recovery option in mgldr menu)
Sent from my HTC HD2 using XDA App

Thanks a lot! I´ve got it done flashing NAND. THANKS!!!!!

Related

hd2 stuck magldr 1.13 help!

Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)

MAGLDR Problem

hi,
MAGLDR doesn't recognize my sd card . i can't use usb mass storage , AD SD => CWM . apparently all the roms i want are released az ZIPs ...
is there a fix for that ?
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
waspsl said:
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
Click to expand...
Click to collapse
Yes exactly thats what i m doing. But it passes to magldr. I even have reset from the red button at the back but no way to bootloader
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
MTN_HD2 said:
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
Click to expand...
Click to collapse
Yes, install the appropriate cwm partition by going to usb flasher and running daf.exe. Then the phone will reboot to magldr, select AD recovery and you can then flash zip roms or updates, backup etc etc etc.... I have a 512 device also, so no problems.
I guess one of the reasons for running recovery off NAND is that not all users could get the sd based recovery to work.
exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
fastscorpion2010 said:
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
Click to expand...
Click to collapse
What hspl version and radio are you using? To use magldr you need 2.08.hspl and radio 2.08.50.xx or higher .50 radio
I'm not sure why it would hang on reflash to winmo, but let's try get to Android.
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
grisantycosme said:
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
Click to expand...
Click to collapse
you're using Stock SPL, you need Hard SPL (HSPL)
ClydeB1 said:
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
Click to expand...
Click to collapse
You...so...rock!
I've been getting utterly frustrated with watching Windows bars filling only halfway, but your solution worked like a charm!
:good: x many!
magldr problem
hi
i was instaling the magldr on my htc hd2, but during the instalation i realise that my VOLUME UP and DOWN buttons are broken and dont work...i have to choose some option in MAGLDR but i cant...so i'm stuck here, my phone boots only MAGLDR even when i restart the phone from the red button, or even when i pull out the batery...is there some option to turn off the magldr, without using the volume buttons? please help me..in the store workers tell me that they cant fix the broken volume buttons...and now i cant use my phone... cheers...

Stuck on "Go Go Go"

Hey guys, I've managed to install MAGLDR on my HD2, and I have tried to install CWM.
First I tried v1.3 and everything went OK till i got stuck on the "Go Go Go" screen.
Then I tried v1.2 using my SD card, but i still end up with the same problem.
The thing is I don't have any ROM installed on my HD2 so I can't do anything more !
Would greatly appreciate your help =)
do you use MAGLDR 1.13?
did you try and reinstall your ROM?
Do you use a compatible radio?
Yep I'm on 1.13
I can't do much more, my HD2 won't even boot into the bootloader ! I'm basically stuck on MAGLDR with no ROM and no ability to install back a standard windows ROM
Eelkede said:
Do you use a compatible radio?
Click to expand...
Click to collapse
I followed the steps carefully, so it should be OK but how can I be sure ?
Make sure your battery pins aren't loose. Push them back with your finger and try again.
Sent from my HTC Vision using XDA App
Tried about everything I could hardware-wise without tearing it apart... unfortunately the battery pins don't change anything.
Quite a few members seem to be facing the same problem recently: no access to the bootloader, stuck on MALDR... wonder what's the problem.
The only thing I can do is run WP7 on it, which is not very usable.
i made this: http://forum.xda-developers.com/showthread.php?t=945427
maybe it helps?
Thanks yz.hd but I can't get to the bootloader (volume down + power only brings me to MAGLDR), nor CWM...
It's not possible to only be able to get to MAGLDR and not bootloader I don't think. Just hold down the volume button and then power on while still holding down the power button and see what happens. I had a problem like that where my HD2 would get stuck at "1234" and then stopped and rebooted. The battery pins where the cause.
Sent from my HTC Vision using XDA App
I've tried loads of times, the combo volume down + power really doesn't bring anything up, no matter which way I put it... a complete mystery !
So you've tried to install CWM? Did it work or not? Are you able to go to the USB flasher in Magldr? And install it again, try to see if the AD Recovery works?
Yep, I tried again, the USB flasher works perfectly fine, CWM installs perfectly. But when I go to Ad recovery, it still stays on "Go Go Go!".
Same thing if i install CWM via my SD card
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
you probably don't have the 'copy to sd' folder in the root of your sd?
Sent from my HTC HD2 using XDA Premium App
Eelkede said:
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
Click to expand...
Click to collapse
What do you mean by a DAF Rom ? One that is directly bootable from MAGLDR ? I have tried a WP7 rom which works ok. But I still can't install a bootloader to bring it back to WP 6.5 and start the process all over again to install CWM...
@DKxda: is it necessary to have a folder ? I copied the two files directly in the root of my SD.
DAF rom is a rom that doesn't use CWM to run (directly from magldr).
Nope I'm still stuck on Go Go Go if I want to install a DAF Android ROM (no problem with WP7 ROMs though)...
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Eelkede said:
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Click to expand...
Click to collapse
Well, since yesterday I'm getting a similar issue!
Stuck at go go go or just after on the boot screen which is completely messed I get the top 1/4 screen ok, the rest is bad lines, then the bottom half is dark.
Yesterday I tried installing a CM7 build for my HD2... stuck at Android logo...
So I reflashed CWM Recovery 400Mb partition ok, restored my last backup and rebooted... Now I have this issue all the time!
Tried my many backups, reflashing CWM Recovery a couple of times, factory reset from CWM or MAGLDR...
Nothing will do!
Is my HD2 dead or what????

[Q] Laptop broke now how do i connect my HD2 NAND via WMDC with ANOTHER computer?

Hey guys, I wanted to install a new theme for my ROM (HyperDroid GBX) so I transfered my theme.zip file to my SD card but when I tried going to CWM 1.3, MAGLDR 1.13 freezes at GO GO GO! and doesn't boot into CWM and so I wanted to flash back to Windows Mobile and start from scratch... but the problem is my laptop (Vista) that I use to flash and has all the HD2 NAND files BROKE [hard drive went kaapoot ] I recently got a desktop with Windows 7 Ultimate but I have no idea how to connect WMDC via USB while I'm on Android so I can flash and stuff... any ideas how to fix this problem? thanks in advance
simple, just download this:
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1073&news_id=918
and here is link for WMDC for win mobile:
http://en.kioskea.net/download/download-409-windows-mobile-device-center
matthew33 said:
simple, just download this:
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1073&news_id=918
and here is link for WMDC for win mobile:
http://en.kioskea.net/download/download-409-windows-mobile-device-center
Click to expand...
Click to collapse
sorry for late reply but thanks for the reply and I havent really tried it yet... do you have any idea why MAGLDR wont boot up CWM? is it MAGLDR or CWM that is having the problem? The phone boots up and runs smoothly its just that part of going into CWM is the problem, maybe you could help me a bit so it'll save me the trouble of re-doing EVERYTHING lol.... thank you again
Connect your phone to the PC via USB and restart your phone (you can also use the soft reset button under the battery cover) and hold the down volume while restarting which will boot you into the tri-colored bootloader.
Wait for the message USB down the bottom of the bootloader and then you will have a connection and flash as normal.
If you need to get into CWR you first need to hold down the power button until the MGLDR menu items appears then use the volume key to go to option 8 to boot into CWR.
OwenHD2 said:
sorry for late reply but thanks for the reply and I havent really tried it yet... do you have any idea why MAGLDR wont boot up CWM? is it MAGLDR or CWM that is having the problem? The phone boots up and runs smoothly its just that part of going into CWM is the problem, maybe you could help me a bit so it'll save me the trouble of re-doing EVERYTHING lol.... thank you again
Click to expand...
Click to collapse
Boot into MAGLDR by holding down the end/power button. Once MAGLDR is booted up scroll to option #5 USB Flasher and connect your HD2 to your computer via USB and reflash CWM. Sounds like CWM got corrupted some how, re flashing CWM is the only way to fish it.
T-Macgnolia said:
Boot into MAGLDR by holding down the end/power button. Once MAGLDR is booted up scroll to option #5 USB Flasher and connect your HD2 to your computer via USB and reflash CWM. Sounds like CWM got corrupted some how, re flashing CWM is the only way to fish it.
Click to expand...
Click to collapse
THANKS! it worked!
matthew33 said:
simple, just download this:
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1073&news_id=918
and here is link for WMDC for win mobile:
http://en.kioskea.net/download/download-409-windows-mobile-device-center
Click to expand...
Click to collapse
I cant connect it by HTC sync neither... my ROM has to have HTC sense in able to connect via HTC sync

[Q] Aaaah im so in a mess please help.

Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
TommyHD2 said:
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
Click to expand...
Click to collapse
You need Hardspl from Cotulla. Search through the threads you'll find it. but if you had magldr installed you should have all the the necesary elements. using the tool kit you have to hold the volume down than power on. wait for your phone to say usb. Than proceed to task 29. Than when the screen shuts off hold the volume down again before the screen comes on. Pick your partition size, Than hit the partiton button wait for it to do its thing than hold the back key and some text should come on your phone ending with something like fastboot commands suspend. Flash the recovery. than when it go off again hold home until you get in to recovery. Hope that helps.
Cheers for the help. Ive got as far as the revovery install i had a load of text on the screen the last line of wich is 2690 --Portchange-- and the pc is sitting on waiting for device.
also this is all it does when i turn the phone on now
TommyHD2 said:
also this is all it does when i turn the phone on now
Click to expand...
Click to collapse
Are you holding the back button until the text comes on?
Have you successful installed hspl? Successfully installed magldr and successfully installed cwm?
Is the Rom your installing a magldr version? Did you get it from the Android nand thread?
Is your SD card working is it formatted to fat32?
Are you installing the Rom from SD?
Is it a .zip file?
Edit/ oh clk..... lol never used it
Sent from my HTC HD2 using XDA Premium App
If i hold the power with the back button or the power/hangup button the text goes up to --portchange-- line if i hold the home button it shoes the line
GET STALL_DESCRIPTOR 128 6 1536 0 10
Pc is still saying waiting for device.
I have magldr but cant seem to boot to it and i have SPL-2.08.HSPL CotullaHSPL
I also tried to install magldr again and it gives a USB init failed Info \\rspl\rspl..cpp (736) but the phone is showing USB with the red\green\blue\white screen.
whynot66 said:
Have you successful installed hspl? Successfully installed magldr and successfully installed cwm?
Is the Rom your installing a magldr version? Did you get it from the Android nand thread?
Is your SD card working is it formatted to fat32?
Are you installing the Rom from SD?
Is it a .zip file?
Edit/ oh clk..... lol never used it
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
haha..
TommyHD2 said:
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
Click to expand...
Click to collapse
alls ye really need mate if you have flashed spl 2.08 or above is get task29 plug phone via USB turn phone off turn back on while holding vol down key untill tri colours appear then it says USB at bottem, run task29 from computer phone will do the rest, get magldr go back to tri colour with USB at bottem run ROMUpdateUtility install it then try the rom in my signature first typhoon and download the recovery of his page and install that specific one then flash your rom, its got installation on typhoon thread....
Cheers for the help. Ive re-installed MAGLDR and have ClockworkMOD recovery v3.0.0.5 working and I have a rom that i have downloaded and am currently downloading one of yours Laney, before i do anything clockwork MOD is showing "Failed to find Cache partition to mount at \cache.
Dont you have an sd card inserted?

Categories

Resources