My "T" fell off :( - Desire HD General

The silver T has fallen off my Desire HD I talked with htc and they said they did not have the stick on letters and i would need to send back for a new case.
I realy dont want all of that hassel but at the same time my top end phone looks stupid. Do any of you know where i could get a replacemrnt?

That's a new one. You could try to glue it yourself if you still have your T with you, if you just find a suitable glue type for that.
If you have any other issue with your phone like loose camera bezel or SIM cover (there is a separate topic regarding all the known faults), then I would probably send it to HTC.
Good luck!

I had exactly the same problem with my Palm Treo Pro (HTC Panther) so now it's affectionately called "Pam" as that's now what it says on the back!
Guess HTC don't use a very strong glue on their devices!

Or perhaps just remove the H and C all together?

Buy something like this:::
http://cgi.ebay.co.uk/Letraset-Rub-Down-Transfers-Teen-Silver-/320663841484
any hobby/arts/stationery store should have them. As its the 'T' thats fallen off, it doesnt even have to be the same font.... a bigger, fancy 'T' would look like a logo
OR just remove the T and C and use a new font for all 3 letters
Or buy this::
http://cgi.ebay.co.uk/LETRASET-PROMARKERS-METALLIC-SILVER-Pen-ACID-FREE-/120602813835
just use the fine tip to mark in the 'T'
Andy

Boradan said:
Buy something like this:::
http://cgi.ebay.co.uk/Letraset-Rub-Down-Transfers-Teen-Silver-/320663841484
any hobby/arts/stationery store should have them. As its the 'T' thats fallen off, it doesnt even have to be the same font.... a bigger, fancy 'T' would look like a logo
OR just remove the T and C and use a new font for all 3 letters
Or buy this::
http://cgi.ebay.co.uk/LETRASET-PROMARKERS-METALLIC-SILVER-Pen-ACID-FREE-/120602813835
just use the fine tip to mark in the 'T'
Andy
Click to expand...
Click to collapse
Problem with that is that the letters are plastic and in-set into the back of the handset, so a transfer would not fit in the gap exactly and would look tacky.
Similarly, using a silver pen to fill in the indent would probably still not look so great, would not have the chrome finish of the other letters, and wouldn't sit flush like the actual physical plastic letters would.

If you have the piece still, what I would do is use a bit of epoxy and that thing will never come off again
Other than that it sounds like your stuck sending your phone in if you want it fixed. Maybe you could get a new one sent to you first then you send it back once you recieve it
Swyped from my Desire HD running Leedroid @ 1.8GHz using XDA app

H C=holy crap. Just kidding.
You should get a replacement from HTC, I think the warrenty covers that.
Just go to the place where you bought it for a replacement.
Sent via psychic transmittion.

If you don't want to send it in, you could also buy a new unibody case. Of course that would void your warranty
Sent from my Desire HD using XDA Premium App

Given the likely hassle you'd get from swapping the entire case, I would just prize off the T from the new case and epoxy it into the existing one. Dunno what you'd do with the rest of the new case though. Quite an expensive and wasteful way to do it. I wonder if dummy handsets use the same letters. Maybe you could convince a mobile phone shop to part way with either a T or a whole dummy phone....
Sent from my Desire HD using XDA App

Related

Legend Repair

Riding home today, I had my loved Legend in my jacket pocket and the zipper failed, letting the phone come out and skip down the road at 70+mph. Luckily, my parents were following me on four wheels and noticed. By the time they got my attention and we made it back, we couldn't find the phone at all. Using my Mom's phone I jumped on mylookout and made it scream. After finding it, the results literally almost made me cry.
After only two weeks of owning the most perfect fitting phone I've ever had, I now have this:
(56k/mobile warning)
https:// dl. dropbox .com/u/6609249/DSC_0869.jpg
Any one have any ideas as to where I can get it repaired? I obviously get calling HTC but I wanted to see if there were any other recommended options available.
I don't want to be pessimistic but I wouldn't be surprised if the cost of a new screen+chassis+labor is more than the cost of a replacement.
I had a very similar problem with my Legend. HTC will repair it for 270 euros..
fabdroid said:
I had a very similar problem with my Legend. HTC will repair it for 270 euros..
Click to expand...
Click to collapse
As of today, that'd be 341.22 USD. Purchase price was more around 500 through myworldphone so l have some figuring out to do. Guess it's time to start posting some stuff up on craigslist.. I *MUST* have this phone back, new or repaired.
I will say about the quality of the phone that it still operates just fine as the music unpaused when I hit the optical and I've been hearing notification/alarm sounds, if I could only find a way to control it through PC. I've tried screencast but can't get the phone to be recognized through USB (I'm assuming doubletwist is autoenabling the USB drive mode, not allowing the phone to switch to "sync" and I sure as hell can't do it)
Any ideas there?
I find it quite amusing that the phone is still in one piece. It is truly a sturdy build, 99% of all phones on the market would probably be separated into a zillion small, small pieces after taking that kind of hit.
Still i shame though. The picture made me shiver at first glance.
OMG...i feel freakin sorry for you dude will try and help you...google...here i go!
ok, i could find you the digitizer...
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-legend-p-2595.html
or here...
http://cgi.ebay.com/Touch-Screen-Gl...ccessories&hash=item3a5b46a6e6#ht_1977wt_1168
will try to find the chassis and the buttons.
I feel sorry too man, I love the phone because its one of the best build phones I cant get a scratch on the screen!
Sent from my HTC Legend using XDA App
I ended up ordering another off of Amazon after taking mine apart to analyze the damage. Previous posters were correct, it would cost just as must to order a new so friend took care of me and got me another.
Interesting part is that (I'm assuming this) the first phone (also from Amazon) seemed to be from Europe, as the default language was UK English or whatever. It also came with a black A/C adapter plug.
The second phone came in with "CN Thai" as the default language, ultimately causing me to just give up changing it and root the phone. Anyway, that phone came with a *white* A/C adapter, no english defaults, Java and one other app starting with a P that was *not* on the first phone.
I wonder just how many out-of-the-box ROMs there are for "unbranded" phones...
Check your ROM version,and post it here.that is an asian version for sure...
Just root your phone and flash the wwe rooted rom.
Sent from my HTC Legend using XDA App

replace lcd/digitizer

My screen is cracked to all hell. Is there a youtube video showing a strip down of the epic? Is there a guide on how to replace it? I have the lcd and ditizer,so I'm all set except for the actual replacement. LOL
Tia
would you mind sharing the source for the screen/digitizer for those that haven't broken their screens yet ?
Just curious.
I do not know how to tear it down yet though.
Thanks for sharing.
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
igotsthemagicinme said:
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
Click to expand...
Click to collapse
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
There is not much for the Epic but some info for the original Galaxy S
http://forum.xda-developers.com/showthread.php?t=745262
Dissemble of Galaxy S:
http://www.careace.net/2010/06/09/disassembly-of-the-samsung-galaxy-s/
and there are some tear-down pics of the Epic
Thats prob all info there is :/
APOLAUF said:
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
Click to expand...
Click to collapse
yea i was just saying "lcd" i got the right one i know
taking a look at the links below
ok well by the looks of it, its pretty much the same thing. i talked to a tech at a repair center, and he said he MIGHT be able to do it. if not, i think i probably have about 70% chance of getting it right. the video showed a break down right down to the digitizer, and it looks almost EXACTLY like that i have, so in theory, i should just have to go as far as gettting the back off, and putting the back BACK on the NEW digitizer/amoleisupmyassed, right?
also, just for clarification, i know i have the right one bcuz i can see the button whole thingies and its the same as what the epic has (menu, home, back, search)
thanks for the useful links& help guys
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
Did they charge anything?
lehaman310 said:
Did they charge anything?
Click to expand...
Click to collapse
Nooooope
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Chabsin said:
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Click to expand...
Click to collapse
How is it out of warranty when it hasn't even been out for a year? or did you mod it or something?
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
just curious...so sprint installed the screen you purchased or they installed one of their own? I had to do this on an htc phone a while back and it was much easier than I imagined.
Sent from my SPH-D700 using Tapatalk
I purchased a bad esn phone off ebay. I run it on a different network. You think a Sprint store would do something for me?!
Demianwulf said:
I had to do this on an htc phone a while back and it was much easier than I imagined.
Click to expand...
Click to collapse
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Chabsin said:
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Click to expand...
Click to collapse
If your seriously considering using glue...crazy glue is the way to go >.> (pun intended)
I still don't understand, why are you out of warranty? samsung offers a 1 year warranty...
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No even though Sprint has it in their system as marked "bad esn" samsung will not have to do with this. Although I don't think Samsungs warranty covers accidents, such as dropping your phone and cracking the screen.
Hope you get it figured out!
Sincerely,
D3luSi0n4L
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Click to expand...
Click to collapse
Well Samsung has their own warranty thing...but I would confirm by contacting Samsung..don't tell them you swapped networks or anything of course..otherwise I don't think they would bother to check...
You can always flash it back too..unless phone doesnt work completely?
I got the whole screen + keyboard for under $60 on ebay. It turned out to be as simple as unscrewing and unsnapping the cover, disconnecting three connectors, removing the electronics and putting them in to the new frame. If I'd have to do it again it wouldn't take more than 15 minutes.
Sent from my SPH-D700 using XDA App

OEM HTC Evo 4G Middle Plate

I've been working on repairing my own Evo, and ran into an issue where the middleplate I bought from China did not come with the wiring tape / Antenna... so I bought one of these.. BUT I had to buy two. Anyone need one? It is on the way, but I won't have a need for two middleplates... PM me and we can work something out. $15 bucks.
This is who I used:
http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-Middle-Plate-p/htc736740.htm
They seem to have everything I have needed in the past, wish I would have ponied up the extra dough and got my parts from them in the first place... Live and learn.
I hope someone sells an aftermarket middleplate like this for the 3D, I hate the inside of the new Evo, it's not red!
How would I go about removing my old one to put this one on?
knowledge561 said:
How would I go about removing my old one to put this one on?
Click to expand...
Click to collapse
You can get the tools from Ebay for a couple of bucks. I've never done anything like this and so far so good. I've seen people substitute a guitar pick for the "safe pry tool" but I splurged.
There are many videos on doing this, hence where I got the ol idea, and it really isn't too hard, I just couldn't transfer the antenna from the old middle plate to the new one.
Samzebian said:
I hope someone sells an aftermarket middleplate like this for the 3D, I hate the inside of the new Evo, it's not red!
Click to expand...
Click to collapse
with a custom backplate with the hole in it for the custom middle plate that has a kickstand....
just an fyi, the black sands off pretty easily and if you have someone good at applying nail polish you can make this a custom color. my evo has red trim now to match the camera/kickstand backing
kellybrf said:
just an fyi, the black sands off pretty easily and if you have someone good at applying nail polish you can make this a custom color. my evo has red trim now to match the camera/kickstand backing
Click to expand...
Click to collapse
I'd like to see a picture of that... sounds pretty slick. I've seen some versions of the bumblebee Evo, not too bad.
only from the side, but you get the idea. my friend did the bumblebee and im not a fan. the red is much more natural. the thing is that the whole piece is actually red, htc painted the sides black
monkeybone12 said:
I've been working on repairing my own Evo, and ran into an issue where the middleplate I bought from China did not come with the wiring tape / Antenna... so I bought one of these.. BUT I had to buy two. Anyone need one? It is on the way, but I won't have a need for two middleplates... PM me and we can work something out. $15 bucks.
This is who I used:
http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-Middle-Plate-p/htc736740.htm
They seem to have everything I have needed in the past, wish I would have ponied up the extra dough and got my parts from them in the first place... Live and learn.
Click to expand...
Click to collapse
the link isn't working.

Broken S Pen

Hi,
My S Pen started to come apart yesterday (the silver end from the main body), then today when i went to pull it out only the silver bit came out and it won't go back together.
I rang Samsung to try and get a replacement under warranty but they said as its an accessory i would have to buy a new one.
Does this sounds right? Surely the S Pen is more than an accessory and should be replaced under warranty as it has broken after 7 days of normal use
Sent from my GT-N7000 using xda premium
I'd return the phone for a replacement from where you bought it
I've got in contact with them. Only thing is i really don't want the hassle of flashing back to a stock rom and then returning it all the way back to Amazon.de and waiting for a replacement.
I had to have a replacement sent in the first place as the first one went 'missing'during delivery
Sent from my GT-N7000 using xda premium
Wow! That's bad luck!
Mine came apart on the first day after trying to grab it from the back, but after a while managed to put it back together. Takes some time and found slowly twisting it until the button becomes operable works best. But have to line up the indent before twisting...maybe yours still can be saved.
Sent from my GT-N7000 using XDA App
I had a similar issue with the Dell x51v PDA a few years back, within a couple of weeks the stylus broke, so contacted Dell who insisted I would have to buy a new one, and they only sell in sets of 3 at £20 or so. I found on a forum that others had had similar problems and Dell USA had replaced for free, so I called back to Dell support and forwarded them links to those same posts and suddenly the response changed, and I got a free stylus 3-pack sent to me.
They were trying to fob me off with "we quality check every item" and such like, but as I explained to them, their process would never be doing full quality checks on every single, individual stylus manufactured, QA is usually sampled a few per batch or it would massively delay production.
Since it sounds like you are not alone with broke stylus problems, maybe all contact Samsung and reference each other and see if they will play ball and replace them for you
Dave
i have the same prob as the OP, but i dont know how to get the main part of the s pen out of the note!
where on earth can i buy a new s-pen? mines the white one too, but i think id settle for black
having trouble finding a replacement anywhere. I see places listing the official s-pen holder which includes a spare s-pen but no one has any stock.
Looks like the s pen is not so good quality. Im sure going to look after mine carefully ;(
Sent from my GT-N7000 using XDA App
grasshoxda said:
i have the same prob as the OP, but i dont know how to get the main part of the s pen out of the note!
Click to expand...
Click to collapse
Try this video, im sure the rest of your broken s pen will come out.
http://www.youtube.com/watch?v=4RgG3bl82HE&feature=youtube_gdata_player
Sent from my GT-N7000 using XDA App
thanks, my gf got it out for me
. now im trying to find where to get a new one
grasshoxda said:
thanks, my gf got it out for me
. now im trying to find where to get a new one
Click to expand...
Click to collapse
Try read the manual come with your box. Its clearly say, not include under warranty and you can purchase it from your closes samsung distributor
Sent from my GT-N7000 using XDA App
grasshoxda said:
thanks, my gf got it out for me
. now im trying to find where to get a new one
Click to expand...
Click to collapse
I got a toshiba tablet pen a couple of weeks ago, it works a treat and it's nicer to write with a full size pen...
I don't have enough posts here to send a link, but if you search amazon uk for B000FG68FA it should work.
Also, the eraser on the other end of the pen works.
Same same,
White 9220.. and i thought it was because i have a Chinese one lol.....
push the glass and never saw the back of the pen fly that high
Made sure that the position is correct so it still worked on the note.... then lot of 3 second super glue....
now i can relax and push the pen thru my glass

The awful journey of my DZ and what should i do with it?

Hi DZ owners, I want to share a story with you:
*walloftext*
I had my DZ for about a year.
Then it was stolen one evening in a place full of people. I never thought I would see it again.
But then after about half a year I got 2 parties, which accused each other of having it.
Through intimidation on luck of one of them still having it I have got it back.
That imbecile did neither sell or use it. He just had it lying around in a cupboard as a kind of trophy, propably even smasehd it on ground some times... (And I wondered why I couldnt track it.)
Now the phone is a terrible mess. The battery was empty for a long time, degraded to not even last a day. The display (not the glass) was broken.
Then I bought a new battery and display for about 30€ replaced the display and while opening one of those small fragile connectors at the side of the board (I dont actually know what they connect, can someone tell me?), the lower one broke but I kludged it with a small piece of tape in place.
Fine everything worked, my Virtuous Unity install boots with /data as I left it.
The reading of my notes and contacts from that time really got me a nostalgia flash.
The sdcard was gone (I actually searched that guys box of stolen phones). Putting a new one in, phone mounts and stops complaining. After that I turned it off, wanting to sleep. The next day I loaded a fresh rom, QuadraSense because Virtuous Unity uses too much ram. Put it on SD and guess what? The SD (any of 5 microsds i have.) cant be mounted, not with FAT, not with EXT. Can the broken connector from the insides cause this?
But when I shake the phone the display brightness varies, (the kludged clip is not really stable) so I guess the connector is either for the display energy or the sensor but it could be multipurpose.
When I have fixed that, what will propably be the next problem with this phone?
Should I invest more time/replacement stuff into it or just buy a new one? Are there newer phones with physical keyboard?
I had a Motorola Milestone 2 for a while for really cheap but their keyboards suck because the keys stop working or stick, it seems like the existing MS2s have reached their end of life. (I have tested 4 MS2s all the same.)
I am thinking of a Galaxy Note if not keyboard. Anyone here knows about the openness and rom diversity? (I am browsing that forum right after this post so this is not just a lazyass question, more of an if someone just has the info in mind right now.)
lol at the existing tags!
sounds like the connection to the sdcard slot is damaged as well as the main flexcable as it sounds like you replaced the lcd
I don't know your situation but if it were me id find it gratifying to kick the guys ass and demand a brand new g2, but to each there own
personal opinion there isn't a better phone on the market right now than the g2/dz, at least not for my needs so it may be worth your time fixing this one
(that guy sounds like the kind of *******s that deserve very bad things)
Sent from my HTC Vision using xda premium
What cell phone does this guy use? You should just take it out of his hand and tell him you're even. I did that to a guy who stole my skateboard once. He was on steroids and weighed 50lbs more than me, but I guess I used the f word enough times loud enough that he realized he was wrong? I don't know if i'd try that again though hahaha
Sent from my HTC Vision using xda app-developers app
I fear it might be the end of your DZ and tbh if it was me in your position I would go with a Note or may be the SG3
I'll pay him a visit today when hes back from work, I think hes got enough money to buy a new one. His currently used phone is an old Sony Erricson thing. As for if I am even with him, dont know my physical condition is not the best but with the power of ale one can not fail. XD
EDIT: Thats the broken piece inside:
Meh embedding doesnt work with 3 MB pics, just the link: http://gheddo.biz/pic/desirez.JPG
Urgh phones get so filthy when you zoom in.
the parts aren't that expensive. U you can get them on eBay and repair it yourself
If you get a new phone. I'd get an sgs3
Sent from my SGH-T999 using xda premium
Illidan Pornrage said:
I'll pay him a visit today when hes back from work, I think hes got enough money to buy a new one. His currently used phone is an old Sony Erricson thing. As for if I am even with him, dont know my physical condition is not the best but with the power of ale one can not fail. XD
EDIT: Thats the broken piece inside:
Meh embedding doesnt work with 3 MB pics, just the link: http://gheddo.biz/pic/desirez.JPG
Urgh phones get so filthy when you zoom in.
Click to expand...
Click to collapse
Just so you know my post was half joke. Yes, I think he owes you a new phone, but I don't want to find out you got in a fistfight with him b/c of my joke advice. haha but still, if he knows he's wrong, you'd be surprised sometimes how compliant a guilty person can be.
Good luck! Let us know what you decide and how it turns out =)
Sent from my Desire Z using xda app-developers app

Categories

Resources