[Q] HD2 Stock SPL - HD2 General

Ok i have a T-mobile USA HD2 and i need to send it in for screen repair
I have restored it to the factory default wm6.5 rom but when i go into the TRI colored screen it still says "CotullaHSPL" i'm sure they wont check but i want to be sure,
so heres my Question , how do i reflash the Stock SPL

humpinbaybays said:
Ok i have a T-mobile USA HD2 and i need to send it in for screen repair
I have restored it to the factory default wm6.5 rom but when i go into the TRI colored screen it still says "CotullaHSPL" i'm sure they wont check but i want to be sure,
so heres my Question , how do i reflash the Stock SPL
Click to expand...
Click to collapse
Download and run HSPL 4, when it ask what version you want to select pick 2.08.0000 or something like that it will not say 2.08 HSPL.

humpinbaybays said:
i'm sure they wont check but i want to be sure,
:
Click to expand...
Click to collapse
The split is the ONLY bit they care about, and they absolutely will check it

my phone came with SPL 2.10
will flashing 2.08 matter?

humpinbaybays said:
my phone came with SPL 2.10
will flashing 2.08 matter?
Click to expand...
Click to collapse
Well I think it would be to your benifit to get uour SPL back to 2.10 if that was your stock SPL. I would want to not have a questiin about it when I send it in for repairs of exchange cause that will void your warranty from that point on if they reject it and say it was not at stock specifications. I would run HSPL 4 and install SPL 2.08 then do tbe following.
If you download the latest official update or current ROM version for your HD2 and flash it via your SD card it will overwrite everything SPL and all. (MAKE SURE IT IS FOR YOUR VERSION OF GHE HD2) If you don't know how to flash via SD card just find the RUU in the update folder and rename it to leoimg.nbha and copy it to your SD card. While your phone is off hold the volume down button down and tap the power button and the bootloader will come up. As soon as you see searching on your phone screen release the volume down button.

Flash your stock ROM via SD Card method.:
Unzip the ROM
Rename the xxx.nbh file to leoimg.nbh
Clean sdcard
Place here the leoimg.nbh and the RUU.exe
Put in the device
Enter bootloader and just follow the prompts.

jigners said:
Flash your stock ROM via SD Card method.:
Place here the leoimg.nbh and the RUU.exe
Click to expand...
Click to collapse
only needs leoimg.nbh
the ruu.exe is a PC file for flashing with USB.

Related

remove hardspl on tmobile hd2

can somebody provide me with a stock tmobile rom to remove hspl? i have tried and it hasnt worked. my screen stopped responding and i need to send it in for repair.
metaltorizo said:
can somebody provide me with a stock tmobile rom to remove hspl? i have tried and it hasnt worked. my screen stopped responding and i need to send it in for repair.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=655653 < stock roms
But if u can... do it like u did to put the HSPL on, just choose the 2.08.00000
please sorry for the newby ? but i need to know how uninstall hspl and put the stock rom i know the hspl uninstall the same way that i instaled but i dont know how to put the stock please somebody help me i need to return my phone to waranty and thank
please help me
Its simple download the stock rom 2.10.1 and extract it to a new folder after that just double click it and
flash it like and any other rom after that remove your hspl had to figure this out myself cause I'm sending it in Monday for repair let me know if you need any help
Sent from my SGH-T959 using XDA App
go to the link the other poster provided. Download the 2.13 stock ROM to a computer (or your phone for that matter).
Unzip the file, open the folder that it unzips to and find the file that ends in .nbh. That is the stock ROM. Change the name of that file to LEOIMG.nbh and put it on your storage card (not in any folder, just on the storage card).
Put your phone in bootloader and press the red end/power button when the grey screen tells you to. This will flash the stock rom and relock the hspl.
To put your phone into bootloader: Hold down the volume down button while either reseting your phone (button under back cover) or while turning your phone on. You should see a tricolored screen, then a grey screen with blue text come up.
You have to use a different memory card from the stock one to do this. Any smaller memory card should work (1,2, or 4gb).
The other option is to download the same 2.13 ROM and run the file from your computer while your phone is connected via activesync to it. Once you have flashed back to stock you have to run the same program that unlocked your phone and relock it to 2.08.0000
nrfitchett4 said:
The other option is to download the same 2.13 ROM and run the file from your computer while your phone is connected via activesync to it. Once you have flashed back to stock you have to run the same program that unlocked your phone and relock it to 2.08.0000
Click to expand...
Click to collapse
I would recommend this method for you, monchofonse. In other words, just run the 2.13 upgrade from your PC, and then once that's done you "reinstall" HSPL, but this time choose the option on it for "2.08.0000"
thank you all you are the best thank again

How do i go back to windows mobile on my htd hd2?!

I have looked all around this forum, google, and youtube. my phone is running on cyanogen 6.1 via nand. I would like to go back to winmo so i can send it back to t mobile because the vibration stopped working. Tutorials, DL links will help.
From the Flashing NAND roms tutorial (link in my signature)
5. UNINSTALLING MAGLDR AND NAND ANDROID (FLASHING WINMO BACK TO NAND)
To uninstall Magldr and any Android Rom that you installed to NAND, do the following:
1. Download a Stock Rom from *HERE* or a Custom Rom from the HD2 Rom Development Forum (for LEO512 ONLY, LEO1024 users will have to use a TMOUS compatable Stock or Custom Rom that is LEO1024 compatable).
2. Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button.
3. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen
4. Run the Stock Roms .exe file (or run the customruu.exe file of the Custom Rom you want to flash)
* This will flash a Stock Rom and Radio while keeping your HardSPL untouched *
Click to expand...
Click to collapse
i think i love you
Yea but that will not remove the HSPL. If you have the latest HSPL you need to open it back up after you load the stock rom and then install the one that is 2.08.0000 at the end of it. Now they will have no Idea. As for the stock rom I just downloaded the one from T-mobile. (www.t-mobile.com/wmupgrade)
Then press the "Thanks" button for him to boost his meter.
i download the stock rom and then how do i do it? im usually an apple guy, im new to android.
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
I am trying todo this on my hd2, to get it back to "stock" wm6.5.
I am having some problems with this. I can get into the bootloader and from my pc initiate the flash. But then it just hangs at 0%.
Anyone got any ideas to what i can do to get it back to "stock" wm6.5 from Android?
Do you still have hspl installed? Are you using the orignal stock rom for your device? Try putting device into bootloader mode first and then connect to your pc, does usb appear on the phone screen when connected?
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
If you're having problems running the flasher executable, try the method mentioned by LiFE1688 above.
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
zatoor said:
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
Click to expand...
Click to collapse
Do you have spl 2.08.0000 or 2.08.hspl installed? You need the latter one if you are flashing a rom which is not officially meant for your phone.
That did the trick. Thank you very much.
zatoor said:
That did the trick. Thank you very much.
Click to expand...
Click to collapse
+1 Thank you!
I tried to reinstall it & my phone turned off. Now it won't reboot. I think it's broken now. Any suggestions?
You will also have to remove HSPL as it is a customized Special Program Loader. Just flash using the .nbh files and that should overwrite the HSPL with the stock SPL. If you use Customruu directly (without modifications) it will not replace the HSPL.
you have to make sure to use a 2gb sd card or less or else it wont work
LiFE1688 said:
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
Click to expand...
Click to collapse
Will this process delete everything from the sd card? Im going to do this process to sell to someone on craigslist and i dont want anything (contacts, texts, pics, etc) to be able to be accessed or seen.
Thanks!
ClydeB1 said:
From the Flashing NAND roms tutorial (link in my signature)
Click to expand...
Click to collapse
I cant find that link,
can you please post it here.
Thank you in advance....
I have HTC HD2 wich I want to rollback to Win mobile, I have androind on it wright now.

[Q] Demolished HTC HD2

Ok basically my phones completely Bricked.
It turns on and shows the HTC Logo and then sits there and does nothing.
I can get the phone into the Rainbow Bootloader however then it won't connect to my computer.
Im pretty sure the phone originally had Android 2.2 however that's all messed up and gone.
Is there a way to completely wipe and then reinstall Android or even the Original WM 6.5?
Im stuck here guys. The phone is a USA T-Mobile Leo.
Cheers
no your phoine is not bricked, if it was bricked it wouldnt even turn on
so you boot intothe boot loader plug inthe usb cable and does it change from serial to usb?
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
joooe said:
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
Click to expand...
Click to collapse
It should be an official rom, shouldn't it ?
kawazaki said:
It should be an official rom, shouldn't it ?
Click to expand...
Click to collapse
Probably yes. Sorry, then.
Either way, he can still download the official rom .exe file and uncompress it with winzip or winrar. After that, he should find the .nbh file and rename it to "leoimg.nbh" and put it in the sd root.
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed.
I also tried doing it from the SD Card the way you guys said to, it worked once, it got to about 3% and said something about Invalid Radio.
I'm guessing this should have worked, however it didn't
Any idea why??
Cheers for your help Guys
PS: When i load into BootLoader mode it does come with with Serial and then USB.
However it also now since the update failed comes up with 'Upgrade ROM Code Error, Please Try Again "
I Get Error Code 284 on the update utility
Cheers
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
pandollar said:
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
Click to expand...
Click to collapse
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
willymanilly said:
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
Click to expand...
Click to collapse
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
T-Macgnolia said:
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
Click to expand...
Click to collapse
ATM My SPL is 2.9
I think it may be corrupt, i took my phone into a phone repair shop and they had no idea how to fix it either.
So does anybody have some detailed instructions on how to do this, id love to get it going!
Cheers
It has to be the radio. If I'm not mistaken you flash the radio just like a ROM.
Here a thread with alot of Radios. Look for the one that says 2.15.50.14 Radio or something similar theres instructions in the thread.
THREAD: [RADIO] The HTC HD2 Master Radio Thread
Good luck!
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
happyhallsy8 said:
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
Click to expand...
Click to collapse
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
T-Macgnolia said:
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
Click to expand...
Click to collapse
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
willymanilly said:
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
Click to expand...
Click to collapse
Ok are you sure you have SPL 2.09 on your HD2 cause it should be one of these?
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
If you have that SPL you might have to flash a older ROM to get another SPL version that will let you flash HSPL as SPL 2.09 will not and I have not heaerd of that SPL so it must have been like a test SPL or something.
Go to "Leo 1.5 T-MOBILE Test & Stock ROMS"and start at the 2,07 ROM, download it and try to flash it via USB and SD card. If no joy, move to 2.09 ROM, if now joy with it move to 2.10.0 ROM and so on and so on until you get one to flash. try both flash methods with both.
Do not, I repeat do not flash or even download for that matter the 2.01 ROM marked not for TMOUS as it will brick/KILL your your HD2!
Recommendations from the SD flash your machine

Loading Stock Rom

OK, so i am trying to load the stock rom back on my old HD2 to send back to t-mobile.
My phone has a broken flex cable going to the bottom buttons so i cannot hit the power button.
I downloaded the stock rom from t-mobile and have it both on sd card and on computer.
I can boot the phone to the point where it wants me to load the rom from SD card, i just cannot hit the power button to accept.
So i tried to do it from the computer. when i do, it just hangs at 8%.
Does anyone have any idea how I can put stock rom back on it?
Hold your volume down button down while you power,on your HD2. When you see the multicolor bootloader screen come up connect your USB cable to the HD2 and computer. Wait for the Serial in the white bar of bootloader to change to USB then run the RUU for the T-Mobile ROM. After you have flashed the ROM download HSPL 4 (linked in my sig) and run it but select SPL 3.03.0000 when it asks what version you want to flash. When you are done runningvthe HSPL utility boot into bootloader again to make sure you have SPL -3.03.0000. If you do and you should ypu are good for warranty.
T-Macgnolia said:
Hold your volume down button down while you power,on your HD2. When you see the multicolor bootloader screen come up connect your USB cable to the HD2 and computer. Wait for the Serial in the white bar of bootloader to change to USB then run the RUU for the T-Mobile ROM. After you have flashed the ROM download HSPL 4 (linked in my sig) and run it but select SPL 3.03.0000 when it asks what version you want to flash. When you are done runningvthe HSPL utility boot into bootloader again to make sure you have SPL -3.03.0000. If you do and you should ypu are good for warranty.
Click to expand...
Click to collapse
This is what i am doing, but it just hangs at 8% no matter what..
bnd10706 said:
This is what i am doing, but it just hangs at 8% no matter what..
Click to expand...
Click to collapse
Which one the ROM or HSPL?
T-Macgnolia said:
Which one the ROM or HSPL?
Click to expand...
Click to collapse
I am trying to load the rom first. I cant boot anything. it just says update failed when i try to boot
bnd10706 said:
I am trying to load the rom first. I cant boot anything. it just says update failed when i try to boot
Click to expand...
Click to collapse
Have you tried flashing via SD card? Here is a guide on how to do this.
Also I recomend you flash HSL first as it might help.
How do i flash HPSL first? I cant get the phone into sync with it?
bnd10706 said:
How do i flash HPSL first? I cant get the phone into sync with it?
Click to expand...
Click to collapse
You don't have to have to be synced through ActiveSync you use HTC USB sync. Click on my guide linked in my sig and follow the instructions there on how to flash HSPL you will see what I mean.
I reloaded HPSL 2.08 and then tried to install the stock firmware via usb and it still hangs at 8%. I wonder if i try to install a different version?
I cannot boot from SD since my bottom keys dont work. I cannot click the call button to accept.
bnd10706 said:
I reloaded HPSL 2.08 and then tried to install the stock firmware via usb and it still hangs at 8%. I wonder if i try to install a different version?
I cannot boot from SD since my bottom keys dont work. I cannot click the call button to accept.
Click to expand...
Click to collapse
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Oh yeah and you can easily get to the tri-color by plugging the USB in and holding the Vol down button.
Skellyyy said:
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Click to expand...
Click to collapse
Awesome! Thank you, no I was not understanding...very new at this. Thank you!
Quick question to add... there is no rom on there at all now....do i need to install one for warrenty?
The green square still says "upgrade rom code error" please try again
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Skellyyy said:
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Click to expand...
Click to collapse
I think they do not have a stock ROM on the HD2 and I was stupid and did not realize they probably already had HSPL on thier HD2. So they are not good to go for warranty just yet.
At the OP try right clicking on the RUU and select run as administrator. Also try different USB ports too that might help.
Skellyyy said:
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Click to expand...
Click to collapse
When you get the red green blue and white screen, the green section.
in the green section it says
Upgrade ROM code error
Please try again
If you just let the phone boot up, lit says "software update faild. please try again" on a black screen with triagle with a ! in it.
T-Macgnolia said:
I think they do not have a stock ROM on the HD2 and I was stupid and did not realize they probably already had HSPL on thier HD2. So they are not good to go for warranty just yet.
At the OP try right clicking on the RUU and select run as administrator. Also try different USB ports too that might help.
Click to expand...
Click to collapse
I am using the exe file that i downloaded off tmobiles site...is that what i should be using to flash?
Skellyyy said:
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Click to expand...
Click to collapse
I would still try to get the stock ROM on the HD2 before sending it in cause I can assure you if they will turn the phome on and check the ROM and SPL. and if they have SPL 3.03.000 and not SPL 2.10.0000 they will say why iscthat cause it looks like they were tring to update the phone and sould not have SPL 3.03.0000. Then they will probably say they either did not preform the flash correctly or had un approved software on the phone and will not pass it as warranty.
bnd10706 said:
I am using the exe file that i downloaded off tmobiles site...is that what i should be using to flash?
Click to expand...
Click to collapse
Yes that is the RUU, right click it and select run as adminastrator, Skellyyy is right too you need to use the HSPL 4 Utility to reset your HSPL to SPL 3.03.0000 if you get the ROM to flash

[Q] Touchscreen failed, send to HTC for fix?

This is the second time this has happened to me, very sad since it's only been 5 months since they fixed it last :/ just need to go through the process to reinstall HSPL original and WM 6.5. basically I need to re factory-ize it haha anybody able to take me through the whole process?
I believe I need to go to *THIS* thread and download the World Wide English (WWE) 3.14.405.2 since I'm T-Mobile.
Now, I believe *NEXT STEP?* is to install HSPL but what one do I select?? Also my Radio was not what it is now, will that make a difference to them?
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
alright, cool because I had read somewhere that the Cotulla HSPL would get rid of warranty if seen..
huggs said:
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
Click to expand...
Click to collapse
The link I have isn't showing a .nbh file rather a .exe of the official ROM
harrystone33 said:
The link I have isn't showing a .nbh file rather a .exe of the official ROM
Click to expand...
Click to collapse
Hi,
You need to revert back to orginal... HSPL is a hack and your warranty is void.
Extract with winrar or 7z the RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe
find the larger *.nbh file and rename it to leoimg.nbh
copy it to your SDcard and reboot to bootloader (the one with 4 colors,hold volume down button)
follow the instructions from there
That way you will have your original software with SPL restored and ready to send it for repair
No need for PC drivers etc.
so I need *RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe this one? and not the WWE version
harrystone33 said:
so I need *RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe this one? and not the WWE version
Click to expand...
Click to collapse
Hi,
Sorry,that appears to be Netherland one
You want the one that is local to you.
Check HTC site and choose the one for your area.
The one I gave was just an example of how to extract.
EDIT:
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone.
That's what I should have put in the first place.
malybru said:
EDIT:
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone.
That's what I should have put in the first place.
Click to expand...
Click to collapse
it does not have an upgrade it says when I look for my version?
T-Mobile US under Downloads correct? this is stating to be a hassle ><
harrystone33 said:
it does not have an upgrade it says when I look for my version?
T-Mobile US under Downloads correct? this is stating to be a hassle ><
Click to expand...
Click to collapse
Hi,
I just followed my own instructions(Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone)
and found the ROM for my phone,downloaded,extracted,etc.
So it does work.
Judging from your avatar,I would say TMOUS is what you need.
Nothing there for T-mobile that I see on HTC website, did a search on T-Mobile's and found one there.. I should have looked there first I suppose.. sorry haha thanks for the help
Got error messages for the way I used instructions "Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects."
huggs said:
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
Click to expand...
Click to collapse
it MUST be less than 4GB? I just have the 16 GB that came with mine..
Hi,
Weird.I checked HTC US site and there are no stock ROMS for download.
Maybe this can help:
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
http://www.megaupload.com/?d=8XZMKWBZ
malybru said:
Hi,
Weird.I checked HTC US site and there are no stock ROMS for download.
Maybe this can help:
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
http://www.megaupload.com/?d=8XZMKWBZ
Click to expand...
Click to collapse
it would, but Im not on WM6.5, still android, so Activesync is not through android OS and the touchscreen is not working so I can only plug in my USB through MAGLDR menu.
and.. it's happened yet again!
this is such a hassle.. I'm stuck as I forgot how I had put it back to original since this post.. lol my HTC ROM update is stuck at 0% when I'm using 3.03 SPL
and when I use 2.08 SPL the original WMO does not even load up after saying it has been installed...

Categories

Resources