Related
I have looked all around this forum, google, and youtube. my phone is running on cyanogen 6.1 via nand. I would like to go back to winmo so i can send it back to t mobile because the vibration stopped working. Tutorials, DL links will help.
From the Flashing NAND roms tutorial (link in my signature)
5. UNINSTALLING MAGLDR AND NAND ANDROID (FLASHING WINMO BACK TO NAND)
To uninstall Magldr and any Android Rom that you installed to NAND, do the following:
1. Download a Stock Rom from *HERE* or a Custom Rom from the HD2 Rom Development Forum (for LEO512 ONLY, LEO1024 users will have to use a TMOUS compatable Stock or Custom Rom that is LEO1024 compatable).
2. Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button.
3. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen
4. Run the Stock Roms .exe file (or run the customruu.exe file of the Custom Rom you want to flash)
* This will flash a Stock Rom and Radio while keeping your HardSPL untouched *
Click to expand...
Click to collapse
i think i love you
Yea but that will not remove the HSPL. If you have the latest HSPL you need to open it back up after you load the stock rom and then install the one that is 2.08.0000 at the end of it. Now they will have no Idea. As for the stock rom I just downloaded the one from T-mobile. (www.t-mobile.com/wmupgrade)
Then press the "Thanks" button for him to boost his meter.
i download the stock rom and then how do i do it? im usually an apple guy, im new to android.
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
I am trying todo this on my hd2, to get it back to "stock" wm6.5.
I am having some problems with this. I can get into the bootloader and from my pc initiate the flash. But then it just hangs at 0%.
Anyone got any ideas to what i can do to get it back to "stock" wm6.5 from Android?
Do you still have hspl installed? Are you using the orignal stock rom for your device? Try putting device into bootloader mode first and then connect to your pc, does usb appear on the phone screen when connected?
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
If you're having problems running the flasher executable, try the method mentioned by LiFE1688 above.
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
zatoor said:
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
Click to expand...
Click to collapse
Do you have spl 2.08.0000 or 2.08.hspl installed? You need the latter one if you are flashing a rom which is not officially meant for your phone.
That did the trick. Thank you very much.
zatoor said:
That did the trick. Thank you very much.
Click to expand...
Click to collapse
+1 Thank you!
I tried to reinstall it & my phone turned off. Now it won't reboot. I think it's broken now. Any suggestions?
You will also have to remove HSPL as it is a customized Special Program Loader. Just flash using the .nbh files and that should overwrite the HSPL with the stock SPL. If you use Customruu directly (without modifications) it will not replace the HSPL.
you have to make sure to use a 2gb sd card or less or else it wont work
LiFE1688 said:
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
Click to expand...
Click to collapse
Will this process delete everything from the sd card? Im going to do this process to sell to someone on craigslist and i dont want anything (contacts, texts, pics, etc) to be able to be accessed or seen.
Thanks!
ClydeB1 said:
From the Flashing NAND roms tutorial (link in my signature)
Click to expand...
Click to collapse
I cant find that link,
can you please post it here.
Thank you in advance....
I have HTC HD2 wich I want to rollback to Win mobile, I have androind on it wright now.
Ok i have a T-mobile USA HD2 and i need to send it in for screen repair
I have restored it to the factory default wm6.5 rom but when i go into the TRI colored screen it still says "CotullaHSPL" i'm sure they wont check but i want to be sure,
so heres my Question , how do i reflash the Stock SPL
humpinbaybays said:
Ok i have a T-mobile USA HD2 and i need to send it in for screen repair
I have restored it to the factory default wm6.5 rom but when i go into the TRI colored screen it still says "CotullaHSPL" i'm sure they wont check but i want to be sure,
so heres my Question , how do i reflash the Stock SPL
Click to expand...
Click to collapse
Download and run HSPL 4, when it ask what version you want to select pick 2.08.0000 or something like that it will not say 2.08 HSPL.
humpinbaybays said:
i'm sure they wont check but i want to be sure,
:
Click to expand...
Click to collapse
The split is the ONLY bit they care about, and they absolutely will check it
my phone came with SPL 2.10
will flashing 2.08 matter?
humpinbaybays said:
my phone came with SPL 2.10
will flashing 2.08 matter?
Click to expand...
Click to collapse
Well I think it would be to your benifit to get uour SPL back to 2.10 if that was your stock SPL. I would want to not have a questiin about it when I send it in for repairs of exchange cause that will void your warranty from that point on if they reject it and say it was not at stock specifications. I would run HSPL 4 and install SPL 2.08 then do tbe following.
If you download the latest official update or current ROM version for your HD2 and flash it via your SD card it will overwrite everything SPL and all. (MAKE SURE IT IS FOR YOUR VERSION OF GHE HD2) If you don't know how to flash via SD card just find the RUU in the update folder and rename it to leoimg.nbha and copy it to your SD card. While your phone is off hold the volume down button down and tap the power button and the bootloader will come up. As soon as you see searching on your phone screen release the volume down button.
Flash your stock ROM via SD Card method.:
Unzip the ROM
Rename the xxx.nbh file to leoimg.nbh
Clean sdcard
Place here the leoimg.nbh and the RUU.exe
Put in the device
Enter bootloader and just follow the prompts.
jigners said:
Flash your stock ROM via SD Card method.:
Place here the leoimg.nbh and the RUU.exe
Click to expand...
Click to collapse
only needs leoimg.nbh
the ruu.exe is a PC file for flashing with USB.
This is the second time this has happened to me, very sad since it's only been 5 months since they fixed it last :/ just need to go through the process to reinstall HSPL original and WM 6.5. basically I need to re factory-ize it haha anybody able to take me through the whole process?
I believe I need to go to *THIS* thread and download the World Wide English (WWE) 3.14.405.2 since I'm T-Mobile.
Now, I believe *NEXT STEP?* is to install HSPL but what one do I select?? Also my Radio was not what it is now, will that make a difference to them?
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
alright, cool because I had read somewhere that the Cotulla HSPL would get rid of warranty if seen..
huggs said:
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
Click to expand...
Click to collapse
The link I have isn't showing a .nbh file rather a .exe of the official ROM
harrystone33 said:
The link I have isn't showing a .nbh file rather a .exe of the official ROM
Click to expand...
Click to collapse
Hi,
You need to revert back to orginal... HSPL is a hack and your warranty is void.
Extract with winrar or 7z the RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe
find the larger *.nbh file and rename it to leoimg.nbh
copy it to your SDcard and reboot to bootloader (the one with 4 colors,hold volume down button)
follow the instructions from there
That way you will have your original software with SPL restored and ready to send it for repair
No need for PC drivers etc.
so I need *RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe this one? and not the WWE version
harrystone33 said:
so I need *RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe this one? and not the WWE version
Click to expand...
Click to collapse
Hi,
Sorry,that appears to be Netherland one
You want the one that is local to you.
Check HTC site and choose the one for your area.
The one I gave was just an example of how to extract.
EDIT:
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone.
That's what I should have put in the first place.
malybru said:
EDIT:
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone.
That's what I should have put in the first place.
Click to expand...
Click to collapse
it does not have an upgrade it says when I look for my version?
T-Mobile US under Downloads correct? this is stating to be a hassle ><
harrystone33 said:
it does not have an upgrade it says when I look for my version?
T-Mobile US under Downloads correct? this is stating to be a hassle ><
Click to expand...
Click to collapse
Hi,
I just followed my own instructions(Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone)
and found the ROM for my phone,downloaded,extracted,etc.
So it does work.
Judging from your avatar,I would say TMOUS is what you need.
Nothing there for T-mobile that I see on HTC website, did a search on T-Mobile's and found one there.. I should have looked there first I suppose.. sorry haha thanks for the help
Got error messages for the way I used instructions "Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects."
huggs said:
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
Click to expand...
Click to collapse
it MUST be less than 4GB? I just have the 16 GB that came with mine..
Hi,
Weird.I checked HTC US site and there are no stock ROMS for download.
Maybe this can help:
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
http://www.megaupload.com/?d=8XZMKWBZ
malybru said:
Hi,
Weird.I checked HTC US site and there are no stock ROMS for download.
Maybe this can help:
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
http://www.megaupload.com/?d=8XZMKWBZ
Click to expand...
Click to collapse
it would, but Im not on WM6.5, still android, so Activesync is not through android OS and the touchscreen is not working so I can only plug in my USB through MAGLDR menu.
and.. it's happened yet again!
this is such a hassle.. I'm stuck as I forgot how I had put it back to original since this post.. lol my HTC ROM update is stuck at 0% when I'm using 3.03 SPL
and when I use 2.08 SPL the original WMO does not even load up after saying it has been installed...
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
I have WP7 DFT on my HD2. can someone please tell me how i would go about returning to the stock rom. what programs would i need, i put WP7 on my phone then my computer got a virus so everything used to flash WP7 is gone and i dont know what i need to download to return to stock, i would like to remove EVERYTHING and get the phone back to how i bought it would you please help me you guys are amazing.
kingsjj912 said:
I have WP7 DFT on my HD2. can someone please tell me how i would go about returning to the stock rom. what programs would i need, i put WP7 on my phone then my computer got a virus so everything used to flash WP7 is gone and i dont know what i need to download to return to stock, i would like to remove EVERYTHING and get the phone back to how i bought it would you please help me you guys are amazing.
Click to expand...
Click to collapse
Download the last Windows Mobile 6.5 update on Tmobile websitehttp://www.t-mobile.com/wmupgrade/ (If US Model) or htc.com
Once downloaded to remove HSPL and return to truly stock extract the update file and copy the .nbh file(200MB+) to an SDCard and rename it to LEOIMG.nbh restart the phone into Bootloader and flash
To keep HSPL just run the exe file
THANK YOU SIR Im gonna try it but just in case could yuou do step by step
I downloaded the update from the website it doesnt seem to be able to be extracted, should i just follow the instructions, willl that brick my phone? lol IM SO CONFUSEDDDDDD
kingsjj912 said:
I downloaded the update from the website it doesnt seem to be able to be extracted, should i just follow the instructions, willl that brick my phone? lol IM SO CONFUSEDDDDDD
Click to expand...
Click to collapse
I'm typing up the step by step.... If you download the ROM make sure that its for your version of the HTC HD2..
If you simply put the phone in Bootloader Mode and Run the program its going to erase WP7, and MAGLDR and flash WM6.5 and leave HSPL (bad if your sending it in to the company)
kingsjj912 said:
THANK YOU SIR Im gonna try it but just in case could yuou do step by step
Click to expand...
Click to collapse
The steps are the same for both the US version of this phone and also the EU (international) version, the only real IMPORTANT step is the first on where you download the stock WM6.5 rom
1. for a Tmobile US HD2 ONLY(Green Call button, and Red End Key) visit the Tmobile WM6.5 upgrade page and download the ROM
http://www.t-mobile.com/wmupgrade/
1a. for the European or International version (grey key colors no Tmobile branding) go to this thread http://forum.xda-developers.com/showthread.php?t=623283 Pick the 3.14 ROM that suits your need (language).
2. Once you have downloaded the ROM you will have a .exe
"T-Mobile_HD2_MR_Software_3.14.531.1.exe" is the US HTC HD2
while the European (Internalional) will say depending on your language picked
"RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
"
To Keep HSPL
3. Turn the phone on in Bootloader Mode and Start up the Update Program once completed it will restart and Boot WM6.5
Do note that it will take a while to turn on and Finish Booting WM6.5
________________________
TO REMOVE HSPL AND RETURN TO STOCK SPL
3a. Right click on the ROM (depending on the Archive Program) and choose to extract the contents of that package
4a. once extracted you want to put the "RUU_Signed.nbh" on a memorycard and rename it to LEOIMG.nbh..... (.nbh is the file extension dont make a file called LEOIMG.nbh.nbh)
5a. Once its copied over put the memory card in the phone and startup the phone in Bootloader Mode
6a. You will be asked if you would like to install the update by press the End KEY, go head and press it
7a. When it is done it will restart and which point you want to go into Bootloader Mode to check that "CotullaHSPL" is gone
If it is then your back to fully Stock
IF NOT then you must download HSPL3_PKG http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 and run it
Choose "2.08.0000" to return to stock
Tachi91 said:
The steps are the same for both the US version of this phone and also the EU (international) version, the only real IMPORTANT step is the first on where you download the stock WM6.5 rom
1. for a Tmobile US HD2 ONLY(Green Call button, and Red End Key) visit the Tmobile WM6.5 upgrade page and download the ROM
http://www.t-mobile.com/wmupgrade/
1a. for the European or International version (grey key colors no Tmobile branding) go to this thread http://forum.xda-developers.com/showthread.php?t=623283 Pick the 3.14 ROM that suits your need (language).
2. Once you have downloaded the ROM you will have a .exe
"T-Mobile_HD2_MR_Software_3.14.531.1.exe" is the US HTC HD2
while the European (Internalional) will say depending on your language picked
"RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
"
To Keep HSPL
3. Turn the phone on in Bootloader Mode and Start up the Update Program once completed it will restart and Boot WM6.5
Do note that it will take a while to turn on and Finish Booting WM6.5
________________________
TO REMOVE HSPL AND RETURN TO STOCK SPL
3a. Right click on the ROM (depending on the Archive Program) and choose to extract the contents of that package
4a. once extracted you want to put the "RUU_Signed.nbh" on a memorycard and rename it to LEOIMG.nbh..... (.nbh is the file extension dont make a file called LEOIMG.nbh.nbh)
5a. Once its copied over put the memory card in the phone and startup the phone in Bootloader Mode
6a. You will be asked if you would like to install the update by press the End KEY, go head and press it
7a. When it is done it will restart and which point you want to go into Bootloader Mode to check that "CotullaHSPL" is gone
If it is then your back to fully Stock
IF NOT then you must download HSPL3_PKG http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 and run it
Choose "2.08.0000" to return to stock
Click to expand...
Click to collapse
THANK YOU, but, i have the .exe file and i right click it but it doesnt give me the option to extract do i need some special program, this is a computer i had lay6ing around because my good one got a virus. and when i run the .exe a program to flash the rom comes up
I suggest Winrar its wat i use and works great and its a free archieve manager
Sent from my HTC Pyramid using XDA App
Rarlab.com
Sent from my HTC Pyramid using XDA App
whatis bootloader
When you restart the phone holding down the Volume down button and the 3 color screen shows up right away, thats the bootloader
Sent from my HTC Pyramid using XDA App
i put the file on my sd and when i boot in bootloader it doesnt show me how to flash, i renamed and everything all it says is serial
kingsjj912 said:
i put the file on my sd and when i boot in bootloader it doesnt show me how to flash, i renamed and everything all it says is serial
Click to expand...
Click to collapse
SO you extracted the .exe (downloaded update file) and moved the biggest file (RUU_Segned) to the sdcard.
You try name variations?
LEOIMG (remove .nbh)
leoIMG
leoimg
Tachi91 said:
SO you extracted the .exe (downloaded update file) and moved the biggest file (RUU_Segned) to the sdcard.
You try name variations?
LEOIMG (remove .nbh)
leoIMG
leoimg
Click to expand...
Click to collapse
I have also tried this and it is not working. Once I get into the bootloader screen nothing happens. I am at a loss. I have the stock ROM already on it but I forgot about the HSPL should I send it back as is.
toreone said:
I have also tried this and it is not working. Once I get into the bootloader screen nothing happens. I am at a loss. I have the stock ROM already on it but I forgot about the HSPL should I send it back as is.
Click to expand...
Click to collapse
You should remove HSPL before sending it back or else they will see that you messed with it and it void your warranty
as for the bootloader not starting the update process.... Aslong as the SDcard works in the phone and you renamed the RUU_signed to LEOIMG it should start up
I'm also at a lost here!
i renamed the file and the update process started...but for some reason, it failed!
Right now, as long as i power up my HD2, a big exclamation mark appeared saying software update failed. please try again. and it just stays there...
need help badly!
thx
do a task29 (if you still have HSPL) and try again..
Aslong as you can go into the bootloader everything is okay
Just connect your HD2 to the PC while in bootloader and run ruu.exe that you've downloaded..
start up phone and pressing volume down till red green blue white.
and then it stays on serial
Bootloader
Bootloader Mode:
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.