Related
Mine does all the time. Its a major week point of the phone. Apart from that and the delete key in Opera (will install the beta of 9.5 to resolve this) the phone is near perfect.
It literally jumps off the phone in my pocket, I put it really nicely on the desk and when I pick it up, it has jumped off again. Hold the 4 corners and move one really (i mean really) slightly and the cover pops off.
The plastic clips where I have put the back on continuously are starting to wear down!
Anyone else get this or is it just me?
Yes mine did when I first got it. Easy fix though.
Take the back cover off, where the two interior clips are housed in the cover ( bottom part of cover lined up with the indents on the phone to allow removal of the cover) give it a good squeeze to bend the metal cover in by pushing both sides.
Worked a treat for me.
Thanks, you have made me look stupid
Works a treat!!
While we're on the subject of battery covers, do you guys have any idea what's up with the metal contacts making connections to the battery cover? Is it some kind of grounding thing? maybe an extensible connection of the antenna, or using the batt cover as wifi antenna or something? Hah, but really, it seems odd.
Good tip though, this thing is stuck on there now!
Nope, but the tip is good.
Jump? Mine has a little 'bump' in the middle, a slight outward curve. Took it to 2 service centres and they said it's normal.
matthewf01 said:
While we're on the subject of battery covers, do you guys have any idea what's up with the metal contacts making connections to the battery cover? Is it some kind of grounding thing? maybe an extensible connection of the antenna, or using the batt cover as wifi antenna or something? Hah, but really, it seems odd.
Good tip though, this thing is stuck on there now!
Click to expand...
Click to collapse
Is it to know if the cover is off?
xpear-e-ah said:
Yes mine did when I first got it. Easy fix though.
Take the back cover off, where the two interior clips are housed in the cover ( bottom part of cover lined up with the indents on the phone to allow removal of the cover) give it a good squeeze to bend the metal cover in by pushing both sides.
Worked a treat for me.
Click to expand...
Click to collapse
Sorry could you explain a little more...i'm a bit blonde haha. The clips on the actual battery cover? where do u bend the metal...like forward, inwards? etc thanks
edit: Nevermind, after taking it off a few times it fits fine now
zoelucker said:
Sorry could you explain a little more...i'm a bit blonde haha. The clips on the actual battery cover? where do u bend the metal...like forward, inwards? etc thanks
edit: Nevermind, after taking it off a few times it fits fine now
Click to expand...
Click to collapse
upside down, your battery cover looks, in profile, roughly like this:
|____|
You want to bend the sides in, on the end where it says SONY ERICSSON, in this manner:
--> /____\ <--
(Don't bend it to such an extreme degree as depicted though, of course! Just an indication of what direction you're bending in...)
matthewf01 said:
upside down, your battery cover looks, in profile, roughly like this:
|____|
You want to bend the sides in, on the end where it says SONY ERICSSON, in this manner:
--> /____\ <--
(Don't bend it to such an extreme degree as depicted though, of course! Just an indication of what direction you're bending in...)
Click to expand...
Click to collapse
I had the same problem. This is how you solve it.
Dont just bend it in the MIDDLE or else you'll deform the entire cover.
xpear-e-ah said:
Yes mine did when I first got it. Easy fix though.
Take the back cover off, where the two interior clips are housed in the cover ( bottom part of cover lined up with the indents on the phone to allow removal of the cover) give it a good squeeze to bend the metal cover in by pushing both sides.
Worked a treat for me.
Click to expand...
Click to collapse
^^^
This guy is a superstar
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Kooper113 said:
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Click to expand...
Click to collapse
The Silicone Sleeve sprint sold me for $11 after 25% off (Premier) and Tax lifts it up off any table
Relax. You and everybody else's phone will become dinged up. You are carrying it around with you all day everyday.
You can use the kickstand to keep it off the table or desk and use a case or pouch for carrying.
Use a liquid lens fixer like for glasses.
I cut a little piece from some old cheap screen protectors to cover mine. I'm sure there is some effect on the picture quality, but no current phone is going to compare to a Cannon anyway.
Resisting Lens Scratch
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
Placing a rubber washer between the battery cover and the phone, would not do anything to keep the camera lens from resting on the surface that would scratch it.
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
I was thinking something along the lines of this. Basically you just need a ring that rests around the lens.
Something similar to this comes to mind. Of course, you wouldn't need to have a new lens on it. Just a piece of metal.
This could be magnetic, or glued. You could probably rip the phone apart and replace the piece with a more protruding piece to do the same, but that's far more intrusive.
I'm sure we'll see commercial magnet like solutions for this. I mean, come on. A small magnetic ring is all we need. Someone is going to bank on that.
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Jye75 said:
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Click to expand...
Click to collapse
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
ViViDboarder said:
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
Click to expand...
Click to collapse
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Jye75 said:
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Click to expand...
Click to collapse
Haha yea. It's a camera on a phone... My DSLR is in it's nice cushy case. My phone will reside, albeit tightly, in my pocket.
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Jye75 said:
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Click to expand...
Click to collapse
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
ViViDboarder said:
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
Click to expand...
Click to collapse
It's nice and snug. There's a hole on the bottom for your fingers to push the phone up to take it out. Magnetic flap, no metal button or anything, so no worries about phantom scratches. Stays close to the hip as well, and doesn't feel oversized or anything. Tight enough on the belt that I don't worry about it falling off.
Cool. I'll definitely check that out then. Thanks.
ViViDboarder said:
Cool. I'll definitely check that out then. Thanks.
Click to expand...
Click to collapse
The one I have is from Sprint online: Part Number CFH2258R
I got a case for mine simply because I've dropped my iPod touch a few times and I'm pretty sure it'd be damaged by now if it didn't have a silicon skin, the EVO's camera worried me as well... The silicon skin Sprint sells seems a lil' bulkier than it has to be tho, and the button bumps aren't as defined as they could be (my iPod touch's skin actually made the buttons easier to press, quite the opposite here). I'm waiting for a different more glossy/smooth skin from Amzer to ship before I decide if I'll just go naked or what...
i found cameraphone lens protector circles at a store called daiso near by me. works great
In two other threads users have noticed the two small pieces of protective plastic wrap on either side of the keys on the slideout keyboard. They are easily to miss, but easily removabe; with a little tugging they come off in one piece.
However, I'm not sure if anyone has yet noticed the protective plastic wrap on the backside of the LCD. If you slide your keyboard out and turn the phone around, you will notice that the entire backside of the screen surface (where it reads "with Google") is covered in a large sheet of the same plastic. It also removes easily by peeling it back and tugging it out from under the keyboard surface.
Removing all of the plastic from the two articulating surfaces has made the sliding much smother for me.
ah yes, I remember something like this on the original droid... removing it made sliding much easier.
I had the keyboard ones off, didn't even notice the one on the back.
Osin83 said:
In two other threads users have noticed the two small pieces of protective plastic wrap on either side of the keys on the slideout keyboard. They are easily to miss, but easily removabe; with a little tugging they come off in one piece.
However, I'm not sure if anyone has yet noticed the protective plastic wrap on the backside of the LCD. If you slide your keyboard out and turn the phone around, you will notice that the entire backside of the screen surface (where it reads "with Google") is covered in a large sheet of the same plastic. It also removes easily by peeling it back and tugging it out from under the keyboard surface.
Removing all of the plastic from the two articulating surfaces has made the sliding much smother for me.
Click to expand...
Click to collapse
i didnt notice the one on the back til someone on the forum pointed it out to me...and yes it does make the slider easier but for me its now a little too easy...i kinda wish i never took off that covering i feel the phone open up in my pocket now sometimes its just too smooth....i usually prefer to keep my phone naked but i might have to get a case as i hear some people saying it made their slider a little more stiff
StAlphonso said:
i didnt notice the one on the back til someone on the forum pointed it out to me...and yes it does make the slider easier but for me its now a little too easy...i kinda wish i never took off that covering i feel the phone open up in my pocket now sometimes its just too smooth....i usually prefer to keep my phone naked but i might have to get a case as i hear some people saying it made their slider a little more stiff
Click to expand...
Click to collapse
The case at first made my slider too stiff but after opening and closing it repeatedly it's eased up and is now nice and firm but not too stiff.
ha, I just found it earlier this week. I removed it and the keyboard ones, but my sliding did not seem to change.
Osin83 said:
In two other threads users have noticed the two small pieces of protective plastic wrap on either side of the keys on the slideout keyboard. They are easily to miss, but easily removabe; with a little tugging they come off in one piece.
However, I'm not sure if anyone has yet noticed the protective plastic wrap on the backside of the LCD. If you slide your keyboard out and turn the phone around, you will notice that the entire backside of the screen surface (where it reads "with Google") is covered in a large sheet of the same plastic. It also removes easily by peeling it back and tugging it out from under the keyboard surface.
Removing all of the plastic from the two articulating surfaces has made the sliding much smother for me.
Click to expand...
Click to collapse
Thanks for the tip.
I thought about removing mine, but I thought it might protect it better if I left them there. But on the other hand, it's so hard to slide open with my case on that I've used the keyboard once, lol.
wardfan220 said:
I thought about removing mine, but I thought it might protect it better if I left them there. But on the other hand, it's so hard to slide open with my case on that I've used the keyboard once, lol.
Click to expand...
Click to collapse
I just took it off on my phone with my case and it has made it easier to slide. You should try it. It's not like it's protecting much. It's the back of the phone that is protected anyways when you don't have it slid open.
The first thing I did when I got my phone was take off this crap.
Sent from my PG06100 using XDA App
I noticed all three bits of plastic strips within a few minutes of playing with the phone. Taking them off definitely made the slider smoother. Especially the big one on the back of the phone screen.
I took them off my wife's phone and now you can hear it scrape when it slides open and closed. I'm going to leave mine on so I don't hear that plastic on plastic sound.
wardfan220 said:
I took them off my wife's phone and now you can hear it scrape when it slides open and closed. I'm going to leave mine on so I don't hear that plastic on plastic sound.
Click to expand...
Click to collapse
Weird cuz mine and my girlfriends literally do not touch the keyboard, so there is no way for that sound to be made.
wardfan220 said:
I took them off my wife's phone and now you can hear it scrape when it slides open and closed. I'm going to leave mine on so I don't hear that plastic on plastic sound.
Click to expand...
Click to collapse
Check and make sure it's not just some gunk in the track or something. The other day when opening and closing my keyboard to loosen up my case it started making this awful grinding noise and I was afraid I'd have to take it back. But after a lot of blowing in the tracks and digging around with a paperclip (Disclaimer: Don't dig around in you phone with a paperclip) whatever it was came out and I was back to smooth, quiet sliding perfection.
jesusice said:
Check and make sure it's not just some gunk in the track or something. The other day when opening and closing my keyboard to loosen up my case it started making this awful grinding noise and I was afraid I'd have to take it back. But after a lot of blowing in the tracks and digging around with a paperclip (Disclaimer: Don't dig around in you phone with a paperclip) whatever it was came out and I was back to smooth, quiet sliding perfection.
Click to expand...
Click to collapse
You know I didn't really look at it much until just now after reading this, thanks for making me look. The sound is the case scraping on the inside back. It started when I took that inside back cover off, kind of wish I hadn't.
If anyone is using a case, I suggest leaving that one on to help silence that knob of the case. At least until it wears down a little.
Sent from my HTC EVO Shift 4G using XDA App.
I've had my phone since the RadioShack early launch day, and those 3 plastic pieces came off about 5 minutes after I left the store.
So fast forward two weeks, and I think the slide out keyboard is too loose. It's been getting worse over time. Flicking through my home screens from left to right causes it to slide out ever so slightly. Very annoying.
I'm wondering if I should have left the plastic on. At least the big one on the back of the screen.
I'm going to order a hard case next week as it looks like a bonus feature is increased resistance on the sliding mechanism.
Never noticed that back plastic but after reading this thread I think I'm going to leave it on. I'm not having an issue with the slide and I would prefer to not have the slide as loose as others are reporting after removing it.
Sent from my PG06100 using XDA App
i left the 'back plastic' on my Mogul all the way until I was through with it about a year ltr...
Really wasn't an issue on the TP or TP2
I intend to do the same with the Shift though... the side plastic pieces on the keyboard will stay until they start peeling off, which will inevitably happen.
I've decided to leave all 3 of them on, more protection .
I removed all 3. It just doesn't feel as good using protection.
Hello everybody!
I´m new to this Forum and want to share my little Hardware Mod tutorial for our RAZR i.
Q: What it does?
A: It strengthen the bottom plastic cover.
Q: Why i does it?
A: Because my bottom cover makes creaky noises when pushing with my fingers.
Q: What do i need for this mod?
A: Only your fingernail and a piece of paper.
Q: Is it easy to do?
A: Yes, realy easy.
My Problem with the bottom plastic cover was that it makes creaky noises when i push
it with my fingers. This was realy annoying for me as the rest of the phone is
made of metal and only the bottom plastic cover has a weak feeling...
So i open the plastic cover with my fingernail, starting on the edge.
It is only hold in position with a few plastic clips and a little doublesided-tape.
So no problem to open. Dont worry! Just put your fingernail under the plastic and open.
The plastic cover has two little plastic pins that fit in two little holes in the phone-housing.
But these pins are (in my case) a little to short or the holes are a little to deep.
So if you push the plastic cover will bend until the plastic pins reach the end of the holes.
This makes the creaky noise.
So i looked at the holes in the phone-housing to fill them a little up with something.
I decided to put a little bit of paper in the holes. That helped a lot!
Just try how much paper you have to put in until it is to much and the cover won´t fit again.
After that you can easy put the cover back. No need for doublesided-tape because of the plastic clips.
Now if i push the plastic cover together with my fingers it never bend and never makes
creaky noises! It feels a lot better than before!
On the Picture you can see the red arrows show the two plastic pins i mean.
I hope everybody can understand what i mean. Sorry for my poor english...
Also i hope you like my little tutorial and happy modding!
greetings, 5m00v3
P.S. DONT BLAME ME IF YOU BRAKE SOMETHING. THIS IS AT YOUR OWN RISK!
IT ALSO CAN VOID YOUR WARRANTY. A SPAREPART IS AVAILABLE FOR 2$.
Huh, neat! I'll have to try this, I've been having the same problem.
Sent from my XT890 using xda app-developers app
I have the same problem but I really dont notice it unless I press tha plastic on porpuose. I tried aligning the papes so as not to have the sound but I only decreased it. So I took them out in fear that I would bread the plastic, It seemed blown up
Just tried it, works like a charm! Makes my phone feel really sturdy.
Sent from my XT890 using xda app-developers app
clickstop said:
Just tried it, works like a charm! Makes my phone feel really sturdy.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Nice to hear! :good:
@rodrigoauditore
Did you fill up the holes or where did you put the paper?
If it is blown up then maybe you put to much in it?
Or try some different positions under the cover to fill up...?
5m00v3 said:
Nice to hear! :good:
@rodrigoauditore
Did you fill up the holes or where did you put the paper?
If it is blown up then maybe you put to much in it?
Or try some different positions under the cover to fill up...?
Click to expand...
Click to collapse
I stuck little balls of paper were you originally posted, but that didn't do the trick so I leyed down another paper on top of everyting, almost covering the glue or whatever the sticky thing is. I think I need better instructions as of where to put the paper
U need only to fill up the holes for the two plastic-pins...
I will try to add more Pictures to show where to put the Paper.
I tried once again and this time I got it right. It only makes sound when I press it too hard on the center. Thank you!
DISCLAIMER: I am not responsible for any unwanted damage you may cause to your device, this is to be a sharing of an idea which happened to work for me and a sort of framework for how you may also accomplish this.
So basically, I despise how terribly fingerprints show on my G4's edge, that's a nit pick. My main complaint is that because it's a glossy plastic, it gets scratched very easily and shows that just as bad, not to mention it's obviously plastic masking as metal and not doing a good job, or more simply put, makes this flagship look cheap. I had a vision of a G4 with a flat black edge, I thought I'd grab a nail file from my bathroom -the giant popsicle stick ones- and use it to gently wear away at the shiny coating. My nail file had two sides, a fine side and a coarser side, I used the fine side exclusively with higher pressure strokes in the beginning to remove the shiny coating, using gentler and broader strokes to smooth, got one of those crazy nail file tools that have multiple sides and are made of two sides with softer layers of material in between, the two sides are also split into different functions, ones usually a buffer and the other is a super fine nail file, fine than the former one.....then I used this same tool to buff and clean up the edges and make sure all is smooth and nice, worked excellently, can also probably use super fine sandpaper and a cloth.
My back plate was off and battery removed, I used the popsicle nail file one side at a time starting with rougher strokes to get rid of the shiny coating -which will distinctly flake away as white little crumbs of plastic- it will take a few passes to completely strip the coating off the edge, you'll notice it lingers like a sort of residue as it contrasts quite distinctly against the revealed plastic, once the coating is nonexistent begin to smooth and finish the side until it is uniform in color and looks completely smooth, you want to keep the direction of the strokes consistent as it will impact the uniformity and smoothness, I went horizontally around the phone if it were laying flat and that gave me great results, give the corners some extra attention but its the same idea, and thanks to the battery back being off I was able to make the finish meet the edge of the battery door by angling the file accordingly, repeat these steps loosely and gently with either the multi-tool-file or extra fine grit sandpaper, use your judgment, buff and finish to your heart's desire. During the entire process be sure to regularly clean off the sandpaper, file and sides of the phone on a cloth of some sort between passes as you will notice the sandpaper glide and will be clogged with material, I was wearing some bumming pants so I just rubbed it off on those, worked wonderfully. Obviously you are removing incredibly small layers of material so guys be careful, you could probably remove quite a bit before anything happens but that can also effec look of things quite badly so try to make it even. I plugged important holes with bits of tissue, only the headphone jack really, the usb port is shallow enough where some air remove any particles.
The file helps especially because of its rigidity and shape, allowing me to have a lot of flexibility when dealing with such a small surface area.
You are putting files and sandpaper near your screen, be careful. I had a very good screen protecter but even then I didn't touch my screen once, you can get at a pretty steep angle like 45 degrees away from being parallel with the screen and still be fine, maybe less, just be wary, it's easy to slip and scratch, I don't think a soft brush would do much but a rough scratch could leave marks.
My IR blaster still works and it received the same treatment, I made no effort to avoid it.
I will post pictures soon, I wish I could use my phone to take a picture of my phone. I'll use someones phone tomorrow to do so.
Feel free to ask me anything if you have a question or I left some vital info out.
:laugh:
okay, waiting for the pics and a more detailed steps before jumping in.
superbonto said:
okay, waiting for the pics and a more detailed steps before jumping in.
Click to expand...
Click to collapse
So, I don't know how to post the pics cus as a new user I can't use links...
Also, you might consider adding a step of using progressively higher grits of sandpaper, and even going all the way to a rubbing compound to get super fine control over how much matte effect you desire. The matte of 300 grit sandpaper is different than the matte of say 450 grit etc.
KingFatty said:
Also, you might consider adding a step of using progressively higher grits of sandpaper, and even going all the way to a rubbing compound to get super fine control over how much matte effect you desire. The matte of 300 grit sandpaper is different than the matte of say 450 grit etc.
Click to expand...
Click to collapse
Yes absolutely, this is worth considering. I merely outlined how I did it to show that its not really necessary to get specific, I didn't go out of my way to get any of the tools I used and it came out satisfactory. I'll probably add it in once I get pics up and if people feel it's not as accessible as I thought.
mp2195 said:
So, I don't know how to post the pics cus as a new user I can't use links...
Click to expand...
Click to collapse
give us the link like www. linkhere.com/blah.img
mp2195 said:
So, I don't know how to post the pics cus as a new user I can't use links...
Click to expand...
Click to collapse
Use https://imgur.com/ to upload the picture and then post the direct link here, I'd love to see some pictures of this.
mp2195 said:
DISCLAIMER: I am not responsible for any unwanted damage you may cause to your device, this is to be a sharing of an idea which happened to work for me and a sort of framework for how you may also accomplish this.
So basically, I despise how terribly fingerprints show on my G4's edge, that's a nit pick. My main complaint is that because it's a glossy plastic, it gets scratched very easily and shows that just as bad, not to mention it's obviously plastic masking as metal and not doing a good job, or more simply put, makes this flagship look cheap. I had a vision of a G4 with a flat black edge, I thought I'd grab a nail file from my bathroom -the giant popsicle stick ones- and use it to gently wear away at the shiny coating. My nail file had two sides, a fine side and a coarser side, I used the fine side exclusively with higher pressure strokes in the beginning to remove the shiny coating, using gentler and broader strokes to smooth, got one of those crazy nail file tools that have multiple sides and are made of two sides with softer layers of material in between, the two sides are also split into different functions, ones usually a buffer and the other is a super fine nail file, fine than the former one.....then I used this same tool to buff and clean up the edges and make sure all is smooth and nice, worked excellently, can also probably use super fine sandpaper and a cloth.
My back plate was off and battery removed, I used the popsicle nail file one side at a time starting with rougher strokes to get rid of the shiny coating -which will distinctly flake away as white little crumbs of plastic- it will take a few passes to completely strip the coating off the edge, you'll notice it lingers like a sort of residue as it contrasts quite distinctly against the revealed plastic, once the coating is nonexistent begin to smooth and finish the side until it is uniform in color and looks completely smooth, you want to keep the direction of the strokes consistent as it will impact the uniformity and smoothness, I went horizontally around the phone if it were laying flat and that gave me great results, give the corners some extra attention but its the same idea, and thanks to the battery back being off I was able to make the finish meet the edge of the battery door by angling the file accordingly, repeat these steps loosely and gently with either the multi-tool-file or extra fine grit sandpaper, use your judgment, buff and finish to your heart's desire. During the entire process be sure to regularly clean off the sandpaper, file and sides of the phone on a cloth of some sort between passes as you will notice the sandpaper glide and will be clogged with material, I was wearing some bumming pants so I just rubbed it off on those, worked wonderfully. Obviously you are removing incredibly small layers of material so guys be careful, you could probably remove quite a bit before anything happens but that can also effec look of things quite badly so try to make it even. I plugged important holes with bits of tissue, only the headphone jack really, the usb port is shallow enough where some air remove any particles.
The file helps especially because of its rigidity and shape, allowing me to have a lot of flexibility when dealing with such a small surface area.
You are putting files and sandpaper near your screen, be careful. I had a very good screen protecter but even then I didn't touch my screen once, you can get at a pretty steep angle like 45 degrees away from being parallel with the screen and still be fine, maybe less, just be wary, it's easy to slip and scratch, I don't think a soft brush would do much but a rough scratch could leave marks.
My IR blaster still works and it received the same treatment, I made no effort to avoid it.
I will post pictures soon, I wish I could use my phone to take a picture of my phone. I'll use someones phone tomorrow to do so.
Feel free to ask me anything if you have a question or I left some vital info out.
:laugh:
Click to expand...
Click to collapse
I just came across this. I will be doing this tonight whn i get home from work. My otter box has scuffed mine pretty good. I like the nail file idea. Its work. Lol make u respect it a little more from the hard work.
make pressure on him so he shares the pics. :/
can the leathe from back cover be removed, am should be getting mine and it might be with leather.. i dont like it. just wondering if someone has taken the leather off the cover.. what it looks like. just plain molded plastic?
raptorddd said:
can the leathe from back cover be removed, am should be getting mine and it might be with leather.. i dont like it. just wondering if someone has taken the leather off the cover.. what it looks like. just plain molded plastic?
Click to expand...
Click to collapse
Dont do it! It will look horrendous! You better get a plastic back cover from eBay, I got one so I could use a Spigen Neo Hybid without damaging the leather back cover.
pakitos said:
Dont do it! It will look horrendous! You better get a plastic back cover from eBay, I got one so I could use a Spigen Neo Hybid without damaging the leather back cover.
Click to expand...
Click to collapse
i think leather looks GAY . no offense guys its just my opinion.. so it would be just a molded plastic right.? ill try see some stuff on amazon. what is the variant you have? is it from mexico..
raptorddd said:
i think leather looks GAY . no offense guys its just my opinion.. so it would be just a molded plastic right.? ill try see some stuff on amazon. what is the variant you have? is it from mexico..
Click to expand...
Click to collapse
Not molded plastic but lots of glue and sew points. Mine is from Telcel H815P
pakitos said:
Not molded plastic but lots of glue and sew points. Mine is from Telcel H815P
Click to expand...
Click to collapse
Unless glue cant be removed then itll look ugly... as foe the sewing points , thats a plu you get ventilation there.
this weather up north isnt very friendly... too bad you cant unlock bootloader.. whers the fun ?
Matte G4 Edge https://imgur.com/a/Bzspg
solventh said:
make pressure on him so he shares the pics. :/
Click to expand...
Click to collapse
Matte G4 Edge https://imgur.com/a/Bzspg
Thanks. Gold idea. Will try this when my broken test g4 arrives.
Can you pls seit the first post with the pics?
mp2195 said:
Matte G4 Edge https://imgur.com/a/Bzspg
Click to expand...
Click to collapse
thanks so much, man :]
Bullnados said:
Thanks. Gold idea. Will try this when my broken test g4 arrives.
Can you pls seit the first post with the pics?
Click to expand...
Click to collapse
For some stupid reason it won't let me edit my original post, weird. I'll try on my PC when I get a chance.
Perhaps to old?