Related
Mine does all the time. Its a major week point of the phone. Apart from that and the delete key in Opera (will install the beta of 9.5 to resolve this) the phone is near perfect.
It literally jumps off the phone in my pocket, I put it really nicely on the desk and when I pick it up, it has jumped off again. Hold the 4 corners and move one really (i mean really) slightly and the cover pops off.
The plastic clips where I have put the back on continuously are starting to wear down!
Anyone else get this or is it just me?
Yes mine did when I first got it. Easy fix though.
Take the back cover off, where the two interior clips are housed in the cover ( bottom part of cover lined up with the indents on the phone to allow removal of the cover) give it a good squeeze to bend the metal cover in by pushing both sides.
Worked a treat for me.
Thanks, you have made me look stupid
Works a treat!!
While we're on the subject of battery covers, do you guys have any idea what's up with the metal contacts making connections to the battery cover? Is it some kind of grounding thing? maybe an extensible connection of the antenna, or using the batt cover as wifi antenna or something? Hah, but really, it seems odd.
Good tip though, this thing is stuck on there now!
Nope, but the tip is good.
Jump? Mine has a little 'bump' in the middle, a slight outward curve. Took it to 2 service centres and they said it's normal.
matthewf01 said:
While we're on the subject of battery covers, do you guys have any idea what's up with the metal contacts making connections to the battery cover? Is it some kind of grounding thing? maybe an extensible connection of the antenna, or using the batt cover as wifi antenna or something? Hah, but really, it seems odd.
Good tip though, this thing is stuck on there now!
Click to expand...
Click to collapse
Is it to know if the cover is off?
xpear-e-ah said:
Yes mine did when I first got it. Easy fix though.
Take the back cover off, where the two interior clips are housed in the cover ( bottom part of cover lined up with the indents on the phone to allow removal of the cover) give it a good squeeze to bend the metal cover in by pushing both sides.
Worked a treat for me.
Click to expand...
Click to collapse
Sorry could you explain a little more...i'm a bit blonde haha. The clips on the actual battery cover? where do u bend the metal...like forward, inwards? etc thanks
edit: Nevermind, after taking it off a few times it fits fine now
zoelucker said:
Sorry could you explain a little more...i'm a bit blonde haha. The clips on the actual battery cover? where do u bend the metal...like forward, inwards? etc thanks
edit: Nevermind, after taking it off a few times it fits fine now
Click to expand...
Click to collapse
upside down, your battery cover looks, in profile, roughly like this:
|____|
You want to bend the sides in, on the end where it says SONY ERICSSON, in this manner:
--> /____\ <--
(Don't bend it to such an extreme degree as depicted though, of course! Just an indication of what direction you're bending in...)
matthewf01 said:
upside down, your battery cover looks, in profile, roughly like this:
|____|
You want to bend the sides in, on the end where it says SONY ERICSSON, in this manner:
--> /____\ <--
(Don't bend it to such an extreme degree as depicted though, of course! Just an indication of what direction you're bending in...)
Click to expand...
Click to collapse
I had the same problem. This is how you solve it.
Dont just bend it in the MIDDLE or else you'll deform the entire cover.
xpear-e-ah said:
Yes mine did when I first got it. Easy fix though.
Take the back cover off, where the two interior clips are housed in the cover ( bottom part of cover lined up with the indents on the phone to allow removal of the cover) give it a good squeeze to bend the metal cover in by pushing both sides.
Worked a treat for me.
Click to expand...
Click to collapse
^^^
This guy is a superstar
One of the first things I noticed about my Atrix is that the battery cover doesn't sit completely flush on the right side -- there is a tiny gap, and the cover creaks whenever I put any amount of pressure on that side. It's making this otherwise nice hardware feel pretty cheap.
Is anyone else experiencing this? Anything I can do to fix it myself?
my atrix fits well tho, maybe u need a replacement
give it a pretty firm push. theres little tabs in there that feel like theyre going to crack but they will keep it slightly up if not forced down. just make sure its lined up good and it should be ok
trapjawmusic said:
give it a pretty firm push. theres little tabs in there that feel like theyre going to crack but they will keep it slightly up if not forced down. just make sure its lined up good and it should be ok
Click to expand...
Click to collapse
this.
when the chick at the store handed me the phone there was a gap on one side, i had to push on it pretty hard for it to snap into place
There should be a little gap on both sides, that's so you can get a fingernail in there to pull it open. If nothing is jamming the clips and it doesn't fit right...heck, it is just molded plastic and sometimes the plastic isn't molded right, take it back. See if they'll swap a cover for you.
Rred said:
There should be a little gap on both sides, that's so you can get a fingernail in there to pull it open. If nothing is jamming the clips and it doesn't fit right...heck, it is just molded plastic and sometimes the plastic isn't molded right, take it back. See if they'll swap a cover for you.
Click to expand...
Click to collapse
Uuh.... no.... you open the case by pulling from the top while grasping the sides. The sides of the rear cover are supposed to be sealed flush with the rounded side bits of the back of the phone.
Oooh, that was much easier!
NOW I get it.
Postal, you guys got me playing with my battery cover, trying to teach my fingers how to make it pop easily.
And I realized ONE SIDE had a tight fit, the other side had a fingernail-sized gap. Played around some more, and evrentually found that if I seated the "loose" side first, the other side would snap down tight, so the cover fits nice and tight all the way around.
It should matter, but apparently it does. If you carefully seat the "wide" side first, the whole thing may snap down nice and tight.
FWIW.
well that is what I was afraid of when I bought the note, the paint job of the bezel disappointed me, especially at the headphone plug, it seems that the paint job is really poor, i ended noticing that the paint started to flicker, what a disappointment i hope that it will not get bigger.
I almost knew from the start that it would flake easily especially at weak points like plug in areas, i wish to know how to fix it, but i saw some video and taking it appart is hell, maybe i should consider giving it a brushed look bezel
hykhleif said:
well that is what I was afraid of when I bought the note, the paint job of the bezel disappointed me, especially at the headphone plug, it seems that the paint job is really poor, i ended noticing that the paint started to flicker, what a disappointment i hope that it will not get bigger.
I almost knew from the start that it would flake easily especially at weak points like plug in areas, i wish to know how to fix it, but i saw some video and taking it appart is hell, maybe i should consider giving it a brushed look bezel
Click to expand...
Click to collapse
I.had mine about a month.no paint issue.never put hard cover on any samaung device.it will peel paint off from bazel.i learned the hard way putting on my infuse.i had tp replace the whole bazel and about 5 min.
mintu123 said:
I.had mine about a month.no paint issue.never put hard cover on any samaung device.it will peel paint off from bazel.i learned the hard way putting on my infuse.i had tp replace the whole bazel and about 5 min.
Click to expand...
Click to collapse
I've had my Note for around 3 months.
2 weeks back I was sick, having fever, throat & ear infection.
I took a visit to the hospital and unfortunately dropped the phone whilst sitting down.
I was so sick & weak the phone slipped whilst in my hand.
Thankfully the damage was minimal. The only minor mark was on the upper left hand corner of the bezel, a slight discolouration.
I too would like to change my bezel.
Would you be kind enough to post a link to a video which shows how to dismantle the bezel & then put back?
Thanks.
kanej2006 said:
I've had my Note for around 3 months.
2 weeks back I was sick, having fever, throat & ear infection.
I took a visit to the hospital and unfortunately dropped the phone whilst sitting down.
I was so sick & weak the phone slipped whilst in my hand.
Thankfully the damage was minimal. The only minor mark was on the upper left hand corner of the bezel, a slight discolouration.
I too would like to change my bezel.
Would you be kind enough to post a link to a video which shows how to dismantle the bezel & then put back?
Thanks.
Click to expand...
Click to collapse
just get it from ebay,its like $30 original.its very easy.remove battery sim and sdcard and remove 9 screws and use ur thumb under the battery and carefully push screen part out.there is a guide in general how to replace a screen.
mintu123 said:
I.had mine about a month.no paint issue.never put hard cover on any samaung device.it will peel paint off from bazel.i learned the hard way putting on my infuse.i had tp replace the whole bazel and about 5 min.
Click to expand...
Click to collapse
no hard cover...you mean no hard cases for Note?
mintu123 said:
just get it from ebay,its like $30 original.its very easy.remove battery sim and sdcard and remove 9 screws and use ur thumb under the battery and carefully push screen part out.there is a guide in general how to replace a screen.
Click to expand...
Click to collapse
Thanks a bunch!
Every bezel ive come across is a piece of ****.
Sent from my GT-N7000 using xda premium
tytung2020 said:
no hard cover...you mean no hard cases for Note?
Click to expand...
Click to collapse
Yes.dont use hard case.if u have to put case on it use them rubber cases.
are you sure that its easy to replace the bezel, are there no wires or stuff to take apart when changing the bezel. So its only removing the 9 screws.
hykhleif said:
are you sure that its easy to replace the bezel, are there no wires or stuff to take apart when changing the bezel. So its only removing the 9 screws.
Click to expand...
Click to collapse
My first Note went for a swim with me in salt water so naturally I tried a few things to get it working again, including removing as many components as possible. The bezel is part of the back cover that the battery sits snug against on all edges, and if you use both thumbnails to separate the screen from this bezel/backplate then it should come off after a bit of manipulation.
IMO it's not worth replacing as one mistake will cause another mark and you'll never be satisfied with it unless it's as new. I've found that only after you get a few nicks and bumps that you actually use it like it's meant to be - used. It's not being careless but spending more time using it than being super cautious is where it's at.
Hey Guys i recently dropped my device into some water, no biggie device still worked and everything, but it was an excuse to get a device with slightly better Bin, so i filed a insurance replacement. So i figured i had already screwed it up, why not take it apart before sending it back.....
As with probably everyone we have all seen the IFIXIT tear-down of our device and they had some issues taking it apart, and even damaging the plastic bezel on the housing. So i was intimidated, but i wanted to see if it really was that hard.....
Guys its NOT HARD AT ALL....The hardest part is the plastic on the sides is actually pretty soft, but the only damage i had was before i heated the device up i tried trying to pry the speaker cover off with just a screwdriver (bad idea). This gave me some very very slight damage where i was prying against the plastic. With the heat and then pry this wont happen. (the adhesive is ridiculous by the way, some very strong stuff (I blame 3M)
Step 1: Heat up device with a hairdryer at the bottom speaker cover, your going to need to get it pretty hot (be careful, your speaker is under that)
Step 2: With device still nice and toasty take a spreader ( i used a guitar pick, but i was thinking a hot razor blade slid under might be more effective)
Step 3: Gently work spreader under speaker cover and work from one end to the other, I used a razor blade to get a gab and then work it off, wasn't to hard since the adhesive is warm and easy to peel off the cover. (be careful, you still have to use that adhesive to put it back on, or use another adhesive)
Step 4: Once bottom speaker cover is off take your spreader and place it between the black part of the housing and the silver part (essentially the phone is placed in a aluminum shell, and you need to get it out).
Step 5: With Spreader placed between the chases gently slide from one end to the other, on the right side by the speaker cover is a white tab, slowly leverage this tab separating the black housing from the silver housing, then pry up from one side to the other tell you get a decent gap.
Step 6: Take your separator and go a side of your phone, doesn't matter which one is done first, just like the previous step, place your spreader between the black housing from the silver, and gently slide from the bottom up, if your doing it right you will hear 3 clicks and that side is separated.
Step 7: Take your spreader and repeat Step 6 on the other side until you hear three clicks.
Step 8: Take spreader back to the bottom and gently pry up pulling the black housing out of the silver Back housing, while doing this you may need another spreader to pry the bottom and then go around the sides to make sure it comes out freely.
Man, excellent photos showing us the goods. What i wanna know is that the heck causes the power button to sink in the way it does. Seems hit and miss with these. Some people get very responsive power buttons, others get mushy clicky feels. Weird.
I couldnt do that to my phone. Were you able to put it back together and have it still look good and function as before?
Acill said:
I couldnt do that to my phone. Were you able to put it back together and have it still look good and function as before?
Click to expand...
Click to collapse
Yes it works just fine, i have been abusing it on purpose, it has yet to screw up, I love this phone. But i have to send it in here soon lol
Good job!! By the way you left you jar of weed in the photos, LOL BLAZE ON!!!!!!!!!
serialtoon said:
Man, excellent photos showing us the goods. What i wanna know is that the heck causes the power button to sink in the way it does. Seems hit and miss with these. Some people get very responsive power buttons, others get mushy clicky feels. Weird.
Click to expand...
Click to collapse
Here is the power button, it has a black sticker over the top, but the button is just a little piece of plastic that pushes the little button, not much contact area really.
rpomponio said:
Good job!! By the way you left you jar of weed in the photos, LOL BLAZE ON!!!!!!!!!
Click to expand...
Click to collapse
I live in Washington, i just stopped caring, and apparently noticing the photobomb...
itzsnookums said:
Here is the power button, it has a black sticker over the top, but the button is just a little piece of plastic that pushes the little button, not much contact area really.
Click to expand...
Click to collapse
Iiiiinteresting. I remember when the HTC One X was new, i took that think apart and bent the casing of it and ended up cracking the plastic casing. Made me sad, then i found all the parts on ebay to get it back to "mint" condition. Exciting. :good:
serialtoon said:
Iiiiinteresting. I remember when the HTC One X was new, i took that think apart and bent the casing of it and ended up cracking the plastic casing. Made me sad, then i found all the parts on ebay to get it back to "mint" condition. Exciting. :good:
Click to expand...
Click to collapse
You know this was easier to take apart then trying to get my dam phone to focus...i hope HTC fixes the autofocus issue......
itzsnookums said:
I live in Washington, i just stopped caring, and apparently noticing the photobomb...
Click to expand...
Click to collapse
One day ..one day I'll smoke with you... Introduce you to some cali greens...sure you guys got some great stuff in Washington too
a box of kittens said:
One day ..one day I'll smoke with you... Introduce you to some cali greens...sure you guys got some great stuff in Washington too
Click to expand...
Click to collapse
Ha, that i doubt...until we can go to the nearest store and buy it =-p
Yea I'm in cali and got my medical license. Smoke on!!!! Anyways. I got a gap on top speaker cover. Is it held on with adhesive?? I'm thinking about using a hair drier to heat it up and hopefully get rid of the gap.. if you can get picture of back side of top speaker grill I would greatly appreciate it. :thumbup: thank you in advance
Sent from my HTC One using xda app-developers app
Here you go.....just adhesive and a screw thats in the inside, my replacement has I gap to.....but haven't played yet to fix it....
Sweetness for tapatalk being a POS and not uploading.....
Sent from my HTC One using xda premium
Thanks brother I appreciate it!!
Sent from my HTC One using xda premium
rpomponio said:
Thanks brother I appreciate it!!
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I got a video uploading right now =-)
itzsnookums said:
I got a video uploading right now =-)
Click to expand...
Click to collapse
Cool! that will be cool to watch thanks!
:good::good:
rpomponio said:
Cool! that will be cool to watch thanks!
:good::good:
Click to expand...
Click to collapse
its not that good lol but gets the general point across.....also remember that the nicks at the bottom were there before hand....
video will be uploaded tomorrow, sorry upload is taking forever
If you have a gap, there is no need to take the phone apart.
Just get some super glue in there and clamp tight.
And here are the OEM replacement parts if you screw up
http://www.etradesupply.com/oem-htc-one-rear-housing.html
I was wondering. Is it possible to ONLY touch the body (ie the housing + speaker grills) and replace them? There are a lot of people who scratched their ones and may want to replace the outside.
sauprankul said:
If you have a gap, there is no need to take the phone apart.
Just get some super glue in there and clamp tight.
And here are the OEM replacement parts if you screw up
http://www.etradesupply.com/oem-htc-one-rear-housing.html
I was wondering. Is it possible to ONLY touch the body (ie the housing + speaker grills) and replace them? There are a lot of people who scratched their ones and may want to replace the outside.
Click to expand...
Click to collapse
???? not sure what u mean?
itzsnookums said:
???? not sure what u mean?
Click to expand...
Click to collapse
In the picture, it seems you have thoroughly torn down the entire phone.
Some people may wish to simply change the speaker grills or the rear case (metal + plastic sides). On a scale of 1-10, how hard would that be?
Hey just a warning for you guys the s pen plastic is cheap as we all can tell so today was showing the phone to some friends forgot the s pen on the couch stupid mistake started playing ps3 anyway after i pulled my phone back out i relized the pen wasnt in there turns out some on ended up sittin on it and it cracked right at the bottom of the button still works but bent and very close to breaking in half if i dont get some crazy glue also phone is new so gonna be hard to get just the s pen for at least a month but thats my stupid mistake be careful with your s pens guys
Good luck finding any plastic which can stand up to your mates arse when it's moulded so thin. ?
Sent from my SM-N9005
I don't think anyone would expect the spen to survive someone squatting on it. But thanks for the warning. Ha.
Sent from my GT-N5110 using Tapatalk
Well i made my problem a whole lot worse the rest of the pen casing cracked while it was in the phone i pulled it out pen is still fine but top half of the plastic casing is locked in there any one have any idea how to get it out. Theres a samsung repair center in my area but i dont want go there if i dont need too i can open the cover up and take it out but im afarid of voidinh the warrenty
It wasn't clever putting it back in like that. The pen is held with a small sprung clip which locates a tiny grove on the pen about 12mm from the tip, that will hold the tip in the phone fairly well.
Your choices are very limited, if it was me I would take the back cover off, look at the pattern in the plastic where the pen goes & drill a tiny hole about 3mm from the end .. ( this will be between the tip of the pen & the clip) use a thick sewing needle or tooth pick innthat hole to push the broken end past the clip & it will slide out on its own.
When done a spot of black glue on the hole if you want.
Sent from my SM-N9005 using xda app-developers app
Pat. said:
It wasn't clever putting it back in like that. The pen is held with a small sprung clip which locates a tiny grove on the pen about 12mm from the tip, that will hold the tip in the phone fairly well.
Your choices are very limited, if it was me I would take the back cover off, look at the pattern in the plastic where the pen goes & drill a tiny hole about 3mm from the end .. ( this will be between the tip of the pen & the clip) use a thick sewing needle or tooth pick innthat hole to push the broken end past the clip & it will slide out on its own.
When done a spot of black glue on the hole if you want.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Interesting while right now i have the pen the tip everything when i pull it out but the top plastic covering on the pen is the part that cracked off and is stuck so i might be able to find some kind of long thin needle and push the clip but im just gonna get samsung to do it cause its still under warrenty of course its a hassle to find the time to go in but its good to have a samsung store in the area
I can't see any way they would remove it
Sent from my SM-N9005 using xda app-developers app
Pat. said:
I can't see any way they would remove it
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I dont think you understand the part the broke heres a pic of the pen
Yes I do. All my posts have been on the understanding that part of the casing at the tip is left in your phone. The small hole I am suggesting is up the top end (near the the on/off switch).
Sent from my SM-N9005 using xda app-developers app
Pat. said:
Yes I do. All my posts have been on the understanding that part of the casing at the tip is left in your phone. The small hole I am suggesting is up the top end (near the the on/off switch).
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Oh ok so you mean drill a hole in the casing put in a needle pull out right ? Also wondering if I take off just the back plate there's no void stickers on there right ?
Small hole to put something in to PUSH the part past the little clip & it will slide the rest of the way on its own & out of the phone.
Sent from my SM-N9005 using xda app-developers app
Only remove battery cover same as when inserting sim or sd. . No void doing that but small hole might void if you don't fill after with black glue
Sent from my SM-N9005 using xda app-developers app
There is a void sticker just past the tip of the pen chamber. You need to remove the screw under it to get the back plate off.
Sent from my SM-N9005
Pat. said:
Only remove battery cover same as when inserting sim or sd. . No void doing that but small hole might void if you don't fill after with black glue
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Advicing a guy that sits on the spen until it cracks and then puts it back in the slot to drill a note 3 ain't very wise imo!
what I would do is this: get a long and thin needle , bend it 2 mm with a precision plier at the tip, and fish the missing part from the slot.
it will work easy .
good luck
GMoneyDTP said:
Well i made my problem a whole lot worse the rest of the pen casing cracked while it was in the phone i pulled it out pen is still fine but top half of the plastic casing is locked in there any one have any idea how to get it out. Theres a samsung repair center in my area but i dont want go there if i dont need too i can open the cover up and take it out but im afarid of voidinh the warrenty
Click to expand...
Click to collapse
You must know this already by now and maybe this won't help your situation but just before you said what I quoted I was thinking: "man now he will need to leave it out." Next I read what fallowed... I hope in future similar situation you will be more "aware".
Good luck mate
Sent from my SM-N900W8 using xda premium
heavylift said:
Advicing a guy that sits on the spen until it cracks and then puts it back in the slot to drill a note 3 ain't very wise imo!
what I would do is this: get a long and thin needle , bend it 2 mm with a precision plier at the tip, and fish the missing part from the slot.
it will work easy .
good luck
Click to expand...
Click to collapse
The small hole is what I would do & it is low risk.
I would not poke things up there as it could damage the retaining clip. "Pen removed" sensor.
In fact some phones that had stylus put a small hole there to allow to blow dust out.
I really don't know why I made the stupid mistake of putting it back in but yeah I have the n900w8 canadain version there's no sticker on any of the back plate screws I'm asking about under it ?
If you can do it without removing void stickers or making a hole it's better but be very careful if you start taking the phone apart. Some screws can have a "paint seal".
Its all good now I opened up the back cover while I was popping it up the piece fell out sensor still works at least for detecting that its out and that I'm away from it so that's good now all I need is some crazy glue To glue it back together and then I'm gonna order a new s pen
PSA!!! Cars are cheap, i crashed my car into the pole while i was playing farmville on my Note 3 and driving at the same time and my bumper split in 2 and broke my radiator and a few other engine parts, but it's not my fault, the car is cheap:good: