I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Kooper113 said:
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Click to expand...
Click to collapse
The Silicone Sleeve sprint sold me for $11 after 25% off (Premier) and Tax lifts it up off any table
Relax. You and everybody else's phone will become dinged up. You are carrying it around with you all day everyday.
You can use the kickstand to keep it off the table or desk and use a case or pouch for carrying.
Use a liquid lens fixer like for glasses.
I cut a little piece from some old cheap screen protectors to cover mine. I'm sure there is some effect on the picture quality, but no current phone is going to compare to a Cannon anyway.
Resisting Lens Scratch
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
Placing a rubber washer between the battery cover and the phone, would not do anything to keep the camera lens from resting on the surface that would scratch it.
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
I was thinking something along the lines of this. Basically you just need a ring that rests around the lens.
Something similar to this comes to mind. Of course, you wouldn't need to have a new lens on it. Just a piece of metal.
This could be magnetic, or glued. You could probably rip the phone apart and replace the piece with a more protruding piece to do the same, but that's far more intrusive.
I'm sure we'll see commercial magnet like solutions for this. I mean, come on. A small magnetic ring is all we need. Someone is going to bank on that.
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Jye75 said:
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Click to expand...
Click to collapse
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
ViViDboarder said:
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
Click to expand...
Click to collapse
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Jye75 said:
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Click to expand...
Click to collapse
Haha yea. It's a camera on a phone... My DSLR is in it's nice cushy case. My phone will reside, albeit tightly, in my pocket.
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Jye75 said:
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Click to expand...
Click to collapse
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
ViViDboarder said:
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
Click to expand...
Click to collapse
It's nice and snug. There's a hole on the bottom for your fingers to push the phone up to take it out. Magnetic flap, no metal button or anything, so no worries about phantom scratches. Stays close to the hip as well, and doesn't feel oversized or anything. Tight enough on the belt that I don't worry about it falling off.
Cool. I'll definitely check that out then. Thanks.
ViViDboarder said:
Cool. I'll definitely check that out then. Thanks.
Click to expand...
Click to collapse
The one I have is from Sprint online: Part Number CFH2258R
I got a case for mine simply because I've dropped my iPod touch a few times and I'm pretty sure it'd be damaged by now if it didn't have a silicon skin, the EVO's camera worried me as well... The silicon skin Sprint sells seems a lil' bulkier than it has to be tho, and the button bumps aren't as defined as they could be (my iPod touch's skin actually made the buttons easier to press, quite the opposite here). I'm waiting for a different more glossy/smooth skin from Amzer to ship before I decide if I'll just go naked or what...
i found cameraphone lens protector circles at a store called daiso near by me. works great
Related
I noticed the first scratch on the corner of my Jam today. Since electronics always take the most abuse on the corners, I devised a quick and easy way to protect the corners of my Jam while I'm in Europe for the next 3 weeks. Take electrical tape or clear satin tape and place a piece over the corners. Works best if you cut a slit in the tape so you can fold it around the corner without wrinkles. In all probability the device will land on its corners if dropped or take the most abuse on the corners if scraped against something. Thus, problem solved; I did it to my digital camera too. It doesn't look half bad on either device, and if you can't stand the black corners, just use clear tape. Any tape works as long as the adhesive won't stick to the advice after you remove the tape.
damn that's dead sexy :lol:
Damn! Why didn't I think of that????
Why don't you run the tape all the way round? I think it will look somewhat better!... :wink:
I'm sorry, but that has to be the stupidest looking thing I've seen in a long time. Why don't you just get a silicon case for about $10 off of EBAY? I mean, if you REALLY need electrical tape and that's all you can find...great. But just get a cheap latex or silicon case such as the ones from JavoEdge.com.
Do you put electrical tape on the front and rear bumper of your car too?
GHETTOOOOOOO
Just curious, what specifically do you expect to happen in Europe over the next three weeks that would necessitate such a precaution when you don't prepare against similar risks at home :wink: ?
hehehehe... Good point JPreston!!! :lol:
I don't get it! People seem to get very upset when they discover they scratched the ball mirror on the back of their JAM. Now we have a JAM covered in electrical tape. Should we all carry our devices in the original box? Or better yet never use them to keep them in pristine condition? I am not saying I didn't get a little ticked off when I found a nice big scratch in the corner after a small drop but come on! I think we're all getting a bit too precious. Anyway, to each their own.
Of far more concern is the gunk that gets on the screen from my face every time I hold the JAM to my head! I mean yuck! What the heck is up with that? Is there that much oil on my face??? I just washed it! I gave my phone to my friend the other day to make a call and his face left some sort of super oil on the screen that wouldn't scrub off for several minutes! Its gross and embarassing! I think we need some sort of face oil protector!
Does anybody have any idea for cheap screen protection? I think the prices are outrageous for the slices of film sold as protectors.
I use the cheapest of them all...
They are made for Palm devices and are sold on flea markets or "One Dollar" stores... :lol:
They cost $1 dollar the 12 Pack!
Just cut them to size and go!
scratch? i've droped my mini 2 times and got 3 dent edges. damn sad. The stupid casing they gave me is getting pretty loose. I put it on my belt.... so everytime i knock it seems that pouch just flings out. The screw and the plastic seems to have worn off.
I think i'm gonna go to a skinning shop to hide the dent edges.
try to buy a leather case for Nokia 7610. it fits.
You dont use that in the box lether case. It will easily fall of that tiny hook.
Wit the lether case of Nokia, it is mounted sideway into the belt by a leather that is sewed.
mine has never fallen. Even if it falls off the belt when you undress, the leather case is so stiff that it will not dent the mini.
@Emil...
Can you post a picture of your JAM in the Nokia case for us to see?
vmirage said:
scratch? i've droped my mini 2 times and got 3 dent edges. damn sad. The stupid casing they gave me is getting pretty loose. I put it on my belt.... so everytime i knock it seems that pouch just flings out. The screw and the plastic seems to have worn off.
I think i'm gonna go to a skinning shop to hide the dent edges.
Click to expand...
Click to collapse
Dropped mine on a concrete floor from about 1.5 meters and got a really ugly dent on one of the corners of the battery cover. The cover wouldn't even go back on!
Easy fixed though. Just took a plastic pen and pushed the dent out from the inside. It still shows a slight dent and small scratches if you look closely, but what the heck...
Anyone know of any metallic paint (model, SKU, UPC code) that I could use on my JAM? I rarely put on my seatbelt, and the one time that I decide to play safe, I scratch up the corner of my JAM. I'd never go "ghetto" as one person put it in the thread, but I'm sure there's something out there to match it up. Any ideas?
Get the jam off of your belt and put it in a proper car holder and you will not only protect it from getting scratches from your seatbelt, you will also get it charged while driving. And also one less reason not to wear a seatbelt that could save your life in the case of an accident.
Incidentally, can anyone recommend a decent car kit for the JAM? I want one I can mount with some amount of ease somewhere on the console... I don't like those ones that stick on the windscreen.
elyl said:
Incidentally, can anyone recommend a decent car kit for the JAM? I want one I can mount with some amount of ease somewhere on the console... I don't like those ones that stick on the windscreen.
Click to expand...
Click to collapse
www.brodit.com
Just don't order it from Expansys as all their product descriptions for Brodit are messed up. Does anyone know where else to buy Brodit because I still need the mounting clip for my car (Expansys kept sending the wrong one). Can you buy from them (Brodit) directly?
Thanks.
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
chibahawk said:
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
Click to expand...
Click to collapse
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Praygo said:
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Click to expand...
Click to collapse
Yes I could see that the inside casing was a bit rough so sanding should stop the problem - but seriously that's a major issue.
Have you found that it holds the phone well though? Because I'm very upset that my phone fell out of it once already but maybe it was an error on my part and it wasn't secure enough...
I've never had the phone fall out of the body glove case.
i mangled my body glove case.
someone bumped into me and the phone fell out of the case AGAIN.
i ripped it to shreds and left it on the side of the road to rot into plastic hell.
i dont recommend this product.
I returned mine. I had the exact same issues (screen and phone falling out). It also didn't attach properly on the top left corner, it was always bowed out. I don't recommend it either.
Anyone got any else to share?
I was THIS CLOSE ( || ) to buying it. lol
Is there anything out there that's similar to it in design, but better?
returned
When all the way snapped on, mine pushed the top left corner so hard the entire screen would not respond to touch. Returned it.
My friend and i had the same issue. We just took it off messed around with it and put it back and it works fine, SOMETIMES it happens again but we just take it off and put it on.
Since there is not any other case that provides this type of protection we are keeping it. I rather my phone be safe than anything else.
I just ordered mine yesterday so I'm anxiously awaiting its arrival.
What exactly did you have to mod to get it to work? According to my readings, you just need to sand down the edges that connect with the screen right?
I may just buy the case and sand down what was mentioned. I like the design of the case..only one so far I really like.
I've been using one for about two weeks and am very happy with it. Had read about the screen pressure issue on other posts (searching helps folks), and scraped down the top corners before I put it on. Don't need a dremel tool or sandpaper. No problems, fits perfectly. The only warning is that it's a little dicey to take off once it's on -- it really fits snugly.
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Torkrench said:
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Click to expand...
Click to collapse
Could you give us the link for the ebay one please!
http://cgi.ebay.com/NEW-RUBBERIZED-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
That is the one I ordered, and the fit is perfect. The only thing I wish it had was the belt clip insert for the case included. I don't know where to find one, but I mostly keep it in my pocket anyway.
you guys want a good case that protects? check out the monaco aluminum case, it comes with a clear lens on it which I haven't removed but you could if you wanted quick access to the touchscreen. I work in the construction field and have yet to have it fall off my clip. I also dropped my tilt (when I used it) from about 8" off a ladder and it was perfectly fine. The aluminum case for the fuze isn't any more bulky than the body glove case either.
bilbobrian said:
check out the monaco aluminum case
Click to expand...
Click to collapse
I've got one of these as well...and while it does protect the phone very well it will also lower your signal strength. I've had these type cases for the Wizard and Tilt and now the Fuze...whenever I'm in an area where the signal was a little iffy to begin with I WILL either drop the call or be unable to answer with the metal case. So, stay away from the aluminum ones if you go into lower coverage areas (and no...the slots they cut in the back to help improve the signal don't actually help.)
Hello everyone.
I got my HD2 a couple of weeks ago and as usual with new toys, am still taking some extra care with it. I had a Touch HD before that withstood quite a few bumps and two small drops. I saw people carying iPhones in pants pockets, back and front. Given that HD2 screen is significantly larger, how fragile is it, really? I usually carry my phones in jacket pocket, screen towards the body, without any case or sleeve. Do I need to take so much care for it or is it actually more resilient than it seems? Yes, I've seen the threads with broken screens. Anything can break, given enough force.
Any serious feedback is welcomed. Thanks.
Cheers, R
Well I have had mine since it was released in the UK and have had it in my right hand side front pocket in my jeans/trousers etc, sat on floors etc and all sorts and nothing has ever happened to it at all. Its a pretty tough screen I think, as long as when its in you pocket its not at an odd angle, I cant see any problems keeping it in there. I certainly have no problems.
Scratch test
There is a YouTube video of a scratch test of the screen of an HD2, its in foreign but gives a good idea of its screen tolerances (those of a nervous disposition may wish to look away towards the end)
http://www.youtube.com/watch?v=NcEaehKWr2s
Hmm I can only speak for myself and my HD2... but my screen has 2 (really small) scratches..
I think these are from a keychain or maybe a lighter in my pocket. I don't really know where the came from - but not from dropping it.
I would recommend to use a (thin - not that thick vikuti) foil to protect it against scratches.
--> Question: What would you recomment regarding a foil to cover the screen? I bought 1 Vikuti foil and really disliked it - it is sooo thick
Edit: I think the knife in the video would be able to scratch the screen... only a matter of right angle an pressure
I dropped mine on new years eve - drunk and the only thing i noticed the following day was that i had lost the backplate lol
Someone on here very kindly gave me a replacement.
Other than that - no scratches so far
Had mine three weeks, using front trouser pocket though I am very conscious of checking the pocket for keys etc first.
I have a full body invisibleSHIELD skin, and i'm extremely happy with it.
I've knocked it a few times on the edge of tables and chairs, once on the metal hand grip on a bus seat, and theres not a mark on it anywhere.
I have a screen protector that covers the entire screen, and carry the phone in my pants pocket in the leather case that came with the phone (I'm waiting on a holster from eBay).
The screen is in perfect condition, however, I did scuff the corner of the HD2 by dropping it (in its leather case) as I went to put it in my pocket coming out of a movie theatre...dropped onto cement.
: /
I use a screen protector and have a very nice silicone case for it that fits very snug, but I'm just being careful.
I believe that common sense is enough to keep this device from being damaged. As you can see from the linked video above, the screen is very resiliant, but it's not scratchproof. Also, why on earth anyone would put it in the back pocket of their trousers and sit down is totally beyone me, but people have done it (and probably still do), but they end up on here asking how to fix their damaged screen. (My advice to them is to hook up a flex capacitor to their car, drive at 88mph, go back in time to before they broke it and slap themselves round the face and say "STOP BEING SILLY!!!")
It's tough, but not unbreakable. Just treat it with respect, look after it sensibly, and DO NOT PUT IT IN YOUR BACK TROUSER POCKET OR FRONT SHIRT POCKET!!!
As the meerkats say... simples
(I hate those adverts, but I do like Back To The Future )
johncmolyneux said:
FRONT SHIRT POCKET!!!
Click to expand...
Click to collapse
Why not...I put it in there all the time?
So it won't fall out or...?
Spike15 said:
Why not...I put it in there all the time?
So it won't fall out or...?
Click to expand...
Click to collapse
lol - I've NEVER seen anyone on this forum say that that has happened to them <sarc mark>
johncmolyneux said:
lol - I've NEVER seen anyone on this forum say that that has happened to them <sarc mark>
Click to expand...
Click to collapse
Just making sure I wasn't missing something.
Personally I don't bend over when I need to get something on the floor et cetera...I bend my knees...I've heard that bending like that is bad for your back.
Spike15 said:
Just making sure I wasn't missing something.
Personally I don't bend over when I need to get something on the floor et cetera...I bend my knees...I've heard that bending like that is bad for your back.
Click to expand...
Click to collapse
Yes, and even moreso if you have a hernia! Good to see that xda is also responsible for good health advice too
I can't wait for mine to arrive next week. I can tell you from experience that the IPHONE has cracked 3 times in pocket when I put too much pressure. Apple does replace them on a regular basis. They allow for what they call a hairline. If it spiders they won't replace it but a hairline is within their tolerance and is common enough for them to replace it without question. That is how I ended up with a new replacement recently. I wasn't using the phone much but my HD battery died on site so I put the time into the IPHONE to use it. I squatted with the IPHONE in backpocket and CRACK. I probably should check my beltline while I am at it..
They replaced it and that worked out anyways as I am going to sell it. Keep my HD and Bold as backup.
The glass looks pretty solid and as many people reported it a good solid piece of hardware.
i keep mine in the case it comes with when i am carrying it around... any pocket really.
i just make sure i dont sit on it! lol
the screen itself is extremely resilient when it is out and in use.
I leave mine lying around all of the time out of the case and it still looks brand new.
I dont use any screen protector.
screen strength
being a kapasitive screen it uses a propper glass cover instead of ****ty plexi glass or resistive glass as most phones use, this naturally gives it a more scratch proof serface but makes it less resilient to actually breaking. like one guy said it all has to do with angle and preshure.. and abit of bad luck when it comes to screen protection i recomend invisiShield. they are nice and thin, VERY clear plastic so it doesnt disturb teh screen quality. and last but not least, the fabric its made of is teh same as teh stuff that they use to cover helicopter rotor blades with, so it comes with a 30 year waranty.
Thanks for all the replies so far. I suspected as much, but it sure is nice to hear other people's experience
Cheers, R
Impunitus said:
Thanks for all the replies so far. I suspected as much, but it sure is nice to hear other people's experience
Cheers, R
Click to expand...
Click to collapse
I had the same fear with its screen .. i posted a poll on the screen
see this
http://forum.xda-developers.com/showthread.php?t=618978
I hope these come out soon. I really dislike how slick the entire phone is. When trying to have a phone conversation, and trying to rest it on your shoulder, holding it between your shoulder and face, it slides right out...
Same here. TMo was suppose to start doing the custom printed covers, but they are slick as well. It was 100 degrees yesterday and sweat doesn't help when you're trying to silde it open one handed either. TMobile has a rubberized shell for it, but it was way too bulky.
donepate said:
Same here. TMo was suppose to start doing the custom printed covers, but they are slick as well. It was 100 degrees yesterday and sweat doesn't help when you're trying to silde it open one handed either. TMobile has a rubberized shell for it, but it was way too bulky.
Click to expand...
Click to collapse
Yeah, I meant to mention those "skins" too, I am not a fan of those. One of my praises for this phone was it's slim profile, and adding one of those skins would make it just that more bulky. I like the material on the back of the Droid.
I like the battery cover on the back of the original MyTouch 3g, other then the fact that it slides open way to easy...
fermunky said:
I hope these come out soon. I really dislike how slick the entire phone is. When trying to have a phone conversation, and trying to rest it on your shoulder, holding it between your shoulder and face, it slides right out...
Click to expand...
Click to collapse
Have y'all looked into eGrips. Might be worth it for now.
Well again, those I am not a fan of. First: I am not sure how those attach, and if it is simply a stick-on, I'd hate to have it leave a residue when you go to remove it. And since it's a cover on a cover, it starts increasing bulk. If someone would come out with a replacement cover, just in a different material, I'd be happy
Edit: I also don't want something that would make it a pain to slide in and out of my pocket... those super grippy type covers do just that. They're great at keeping them in place on a car dash, or on your shoulder, but it's likely going to turn your pocket inside out, leaving you open to being bum rushed when the change falls out of your pocket.
fermunky said:
I hope these come out soon. I really dislike how slick the entire phone is. When trying to have a phone conversation, and trying to rest it on your shoulder, holding it between your shoulder and face, it slides right out...
Click to expand...
Click to collapse
Well, it *IS* called the Slide. Sorry, couldn't resist.
benmarvin said:
Well, it *IS* called the Slide. Sorry, couldn't resist.
Click to expand...
Click to collapse
Touche my friend.
fermunky said:
Well again, those I am not a fan of. First: I am not sure how those attach, and if it is simply a stick-on, I'd hate to have it leave a residue when you go to remove it. And since it's a cover on a cover, it starts increasing bulk. If someone would come out with a replacement cover, just in a different material, I'd be happy
Edit: I also don't want something that would make it a pain to slide in and out of my pocket... those super grippy type covers do just that. They're great at keeping them in place on a car dash, or on your shoulder, but it's likely going to turn your pocket inside out, leaving you open to being bum rushed when the change falls out of your pocket.
Click to expand...
Click to collapse
Maybe it's time to use what we call headsets?
They even have wired and wireless version of this gadgets..
N1M1TZ said:
Maybe it's time to use what we call headsets?
They even have wired and wireless version of this gadgets..
Click to expand...
Click to collapse
Eh, maybe I am old fashioned, but I hate headsets more than the battery cover I rarely use the phone in my car, so I see little use of the headset. Actually, I only use the headset when listening to my music.
OH, which BTW, if you used Subsonic, now you can browser your server using the phone's browser since it has Flash support, no need for the Subsonic app Maybe I'll post that in the apps thread...
The phone is great but it is way to slippery.
I was thinking of maybe taping off parts of just the back cover and spraying on a product called Plasti Dip just to give it a thin rubber coating.
schnem said:
The phone is great but it is way to slippery.
I was thinking of maybe taping off parts of just the back cover and spraying on a product called Plasti Dip just to give it a thin rubber coating.
Click to expand...
Click to collapse
I'm very familiar with plasti dip, and thats not a bad idea...
I put on some ghost armor on my device. It makes it a little more slip resistant. It was at one of the mall shops at a local mall.
-------------------------------------
Sent via the XDA Tapatalk App
Agreed on the slippin slide. I have a bench seat in my truck so i have to keep a t-shirt on the seat to hold my phone in place. (while streaming pandora into my stereo!)
So since gel skins have YET to show up at my T-mo store... I have been contemplating how to spray paint it or rubber coat it... If someone is bold enough I would love to see the photos.
Here are the potential problems
1. the holes in the back for the speaker.. we can porbably just poke them out with a pin after spraying.. hopefully it still looks pro
2. i started to pull off the front plastic and it seemed like the plastic screen cover was connected.. not sure if I want to mess with that... but it might look lame if the front doesnt match.
Possible anti-slide solutions...??
- some sort of stick on rubber tread that looks cool??Maybe if we find a cool piece of rubber tread that is made to stick on or we glue it one it could look cool and stop the damn phone from sliding.
p.s. my dream would be for someone to make a metal cover like the nexus (no i dont want a nexus I just like the finish that looks like an adults phone) with rubber tread lines built into it.. maybe I need to find a manufacturer. ..
I hate the slick back cover as well, i miss the cover on my G1 its the non-slick bio-hazard one. just the type of grip makes it great to slide in and out of pocket, less scratches, easier keyboard slide out.
Its too glossy for my taste i have to wipe the whole phone when im done with it for the night to make sure the finger prints are gone, gets annoying.
i'm looking for a nice matte cover as well, i hate the slickness(i dropped my phone because it slid out of my pocket). worst case scenario i might grab a replacement black one and sand it to a matte texture.
I am about to spray it with a satin black car trim spray... and if that doesn't work the next step will be a rubberized spray I think... Will post if it doesn't look like complete garbage lol
Well I hate to get ahead of myself but here is my rubber coated battery cover.. I am still waiting so patiently for it to completely dry. If what I used works then I will post a photo how to . Hang in there!
-------------------------------------
Sent via the XDA Tapatalk App
I was thinking on trying an invisibleSHIELD, has anyone ever tried one?
motorjonny said:
Well I hate to get ahead of myself but here is my rubber coated battery cover.. I am still waiting so patiently for it to completely dry. If what I used works then I will post a photo how to . Hang in there!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
What product did you use on that, and did you tape off the holes or just poke them out with a toothpick type device?
Hello all,
I was wondering if its safe to use the phone without a case. I kind of like its design but i am rather afraid that the camera will break because it stands out way too much.
I already have a case,temp glass for screen and camera applied but i have started disliking my cases so far.
My question to you all is, do you really use a cover case to protect the camera or is it safe to take it off?
With cover is the best way, my phone have a scratch on top of the edge just hitting a furniture with a case on it
It's way too slippery to use without a case. I use it without a case a lot and have already dented the corner from a drop.
Sent from my LEX727 using Tapatalk
I like the design and feel of the phone too, but I use a case just to protect the camera. Even with the case that came with the phone, the camera was scratched up because the case is too thin. I now use a different case that's slightly thicker.
Sadly same thoughts, its too much of a risk. I had it one day without a case and its too risky, if only camera didnt stand out that much.
Back to flip case.
I work in construction and never use cases with any of my phones. I just hate the looks and added bulk. I already dropped mine quite a few times, even from head height, still working fine lol. Its just the same as with any other phone. Its neither more nor less slippery, and since its made from metal you wont get breaks in the body, worst case scenario a dent. I dont see this phone having any resell value after few years, and since it cost so little, i prefer enjoying how good it feels in hand and how slim it is rather than making it ugly and fat like oukitel or some other ****ty cheap chinese phone. Last time i used a case it actually made damage instead of protecting the phone. Small particles of dust got inside case and scratched whole backside of my nexus 6p, never again. And whats with the camera lens concerns? it has a small lip, so it should be enough to protect against flat surfaces, and no case gonna protect against other damage, like keys or stuff.
I would not but depends on your use
I somehow have a scratch on my fingerprint sensor. It works fine but...
evan220 said:
I somehow have a scratch on my fingerprint sensor. It works fine but...
Click to expand...
Click to collapse
How does someone even manage that?
jts2111 said:
How does someone even manage that?
Click to expand...
Click to collapse
I'm a mechanic. Might be part of it.