damn i was late to see adry update, i'm using 2.4 voodoo EB01 right now
how do i get 2.6 voodoo
do i have to :
- go to my red clockwork
- wipe all
- disable lag fix
- flash 2.6 voodoo rom from here
- then flash Voodoo eb16 kernel w/ dummy tether module from here
- enable lag
- reboot
That's it ??
do i have the right way?? please tell me
coz adrynalyne didn't write guide for his rom update
eb01 = modem, right??
eb16 = ?? is it modem too ??
TIA
If you are going from voodoo to voodoo, you won't need to disable lagfix. I just wiped Dalvik Cache and flashed 2.6, then flashed the new kernel when it came out.
You don't need to flash any kernels, SuperClean includes a kernel (either a voodoo or non-voodoo kernel). You're also still using the EB01 modem (EB16 isn't actually for Verizon Fascinate, but parts of it are being used for it).
Related
So i tried dj05 rom with voodoo kernel: jt's clean .5 rom and 11/29 voodoo 5 and dj05 modem
i got an fc hell so i went back to cwm(red) recovery and wiped data and cache and then odined di01 modem and then nanded back to my previous rom
i guess irc users told me my problem was i didnt turn off voodoo first before nand restore but it was too late my rom restored with no apps but with 4 or 5 apps including settings, market and camera plus the TW launcher so i tried odin to stock and still the same. so i formatted cache, data, system, and boot >> odined again and this time my phone loops back to recovery.
so i tried to flash a di01 stock rom found somwhere in the forums from jt (when di01 1st came out) and still the same. tried nand and same and odin also still the same IDK WHAT TO DO NOW
Flash clockworkmod with Odin and start from there. Look at the removing voodoo completely thread in the fascinate dev forum. Try that. Then flash a custom rom and kernel and hope things work from there.
Edit: I remember reading in IRC that nandroid in the green cwm is broken. So the nandroid backups your probably trying to restore aren't going to work right. After you do the remove voodoo completely thing look for the thread with the stock nandroid images. And give that a whirl.
Sent from my SCH-I500 using XDA App
Ok so in fixing my market I uninstalled voodoo so I could restore and do geeknik again. After uninstalling voodoo and flashing the geeknik kernel and deleting the voodoo folder I noticed if I reboot into recovery from my power menu it still goes into cwm red..any ideas? As far as right now I am back to voodoo with no market issues..but still would like know why that happened.
SCH-I500 - DJ05/SuperClean .7/Nemesis OTB 1200lv/Voodoo5/Darkstar
flash one of JT's new non-voodoo kernels to remove red CWM
Rgr. Just figured a non voodoo kernel at all would have done it. Thanks brother.
SCH-I500 - DJ05/SuperClean .7/Nemesis OTB 1200lv/Voodoo5/Darkstar
My samsung fascinate has VooDoo on it. I did not put it there, I am not comfortable with ADB shell and the commands that go with it. Its a D101 that HAS to run at 800Mhz with Voodoo (Not the 1.2 the specific voodoo is) at 1.2 nothing runs and constantly redraws the homescreen.
I tried the automatic uninstaller, and the red recovery stays to haunt. I've tried other kernels while disabling Voodoo.
My phone was running fine up until recently where it would have random reboots and have trouble booting back up.
I came across flashing back to stock with ODIN. the system file went over fine, and I even did the stock kernel and (PIT)
i Just flashed them all through ODIN.
The phone boots up fine to the main screen, where then I get the error message about a UID ? (Sounds dirty) it says to wipe data or my phone will have inconsistencies. Then gives me a button that says "feeling lucky"
Message as follows "UIDs on the system are inconsistent, you need to wipe your data partion or your device will be unstable" Only button to click is I'm feeling Lucky
everything force closes, red voodoo still shows up in recovery. What am I missing or doing wrong?
I bought this phone this way and like i said i know NOTHING about ADB or all those commands, etc.
Can somebody help me out? I'd even gladly send it to a trusted member for repair with a donation, of course.. until then I'm using my OLD bb curve
http://forum.xda-developers.com/showthread.php?t=867648
thats full d101 thread
http://forum.xda-developers.com/showthread.php?t=885262
thats full dj05 thread
both should be able to get you back to stock through odin then you can restart what you did. personally i keep both handy since i already had to use them due to an error that cause the phone to freeze up completely at the samsung logo. hope that helps
make sure you use the pda option in odin and not the phone..aparantly using the phone option can really screw things up
I did another factory data reset, and my UID message vanished. Although, VooDoo is still in recovery even after flashing D101 through ODIN.
My phone gave me the notification of an update (DL09) It downloaded it, and when it went to install it - it booted right into the red VooDoo recovery.
I'm going to flash DL09 through ODIN now, but I'm thinking VooDoo isn't about to go anywhere.
BrianWM said:
I did another factory data reset, and my UID message vanished. Although, VooDoo is still in recovery even after flashing D101 through ODIN.
My phone gave me the notification of an update (DL09) It downloaded it, and when it went to install it - it booted right into the red VooDoo recovery.
I'm going to flash DL09 through ODIN now, but I'm thinking VooDoo isn't about to go anywhere.
Click to expand...
Click to collapse
are you disabling voodoo before flashing these new kernels?
Powell730 said:
are you disabling voodoo before flashing these new kernels?
Click to expand...
Click to collapse
Yes, VooDoo is disabled.
BrianWM said:
Yes, VooDoo is disabled.
Click to expand...
Click to collapse
so did you use the odin files and flash it via PDA in odin? if so, did that revert you to total stock? i believe those .md5 files contain the stock recovery.
EDIT:
do you know what version of voodoo you're using?
http://forum.xda-developers.com/showthread.php?t=804784
that guide should help you, if you're using voodoo 5 there is a guide there that specifcally says "if you're still getting the red voodoo menu flash this file then flash a nonvoodoo kernel." check that article out by ady if you havent already.
flash voodoo boot right into recovery. adb shell into the device and type
cat /voodoo/partition_tables/fascinate > /dev/block/mmcblk0
And then reflash everything with Odin.
Also one of adrynalyne's di01 packages doesnt flash recovery. So either flash my dj05 or go to adrynalyne's cwm odin thread and flash a regular update.zip cwm tar.
Sent from my SCH-I500 using XDA App
A proper, 100% full Odin tar will replace everything on the phone, including voodoo, and the partitions that it formatted as ext4 will now be RFS again. Since the full DJ05s and DL09s came out I use it as a first resort instead of a last resort. Flash the full tar, CWM, the kernel, then nandroid and I am good to go in about 15 minutes.
Just to throw my two cents' worth in here, red CWM is not synonymous with Voodoo. It's just the version of Clockworkmod recovery that is capable of working when the lag fix is enabled. It's normally installed with Voodoo kernels, but the Voodoo lagfix itself can be completely disabled, and red CWM will still work just fine. If you got the OTA notification for DL09, it sounds like you have a stock ROM, which means Voodoo is actually gone, so you just need to restore the recovery from red CWM back to stock so that the OTA patch will be able to install properly.
ivorycruncher said:
Just to throw my two cents' worth in here, red CWM is not synonymous with Voodoo. It's just the version of Clockworkmod recovery that is capable of working when the lag fix is enabled. It's normally installed with Voodoo kernels, but the Voodoo lagfix itself can be completely disabled, and red CWM will still work just fine. If you got the OTA notification for DL09, it sounds like you have a stock ROM, which means Voodoo is actually gone, so you just need to restore the recovery from red CWM back to stock so that the OTA patch will be able to install properly.
Click to expand...
Click to collapse
Presentation is everything, thanks for the info!
I cant seem to install any ROMs or anything other than a apk with voodoo installed on eb01.
I either get error on line 3 or sig failure!!!
Why is this?
fully uninstall rom manager, reboot and red cwm should work.
to get to recovery use the shutdown menu's recovery option.
don't use rom manager with voodoo. they conflict. its 2 different builds of red cwm and they don't play nice.
rock on
Samsung Fascinate - EB01 Froyo. Running SuperClean 2.4 Voodoo
booted into red still get error.
hmm i had the same issue. i did those steps and it cleared it up for me.
after u did that did u apply the update.zip? try boot to red, apply update zip. u may have the broken update.zip still on there.
if it doesn't work with what u have go to the thread with the" fixed" cwm and downlaod the test zip and try applying that.
Samsung Fascinate - EB01/Froyo.
SuperClean 2.4 Voodoo
MTM iOS keyboard
Cyanogen Boot Animation
Warning: I know just enough to be dangerous
Heya XDA. Since I've installed JellyBlast, I've been loving it. But everytime my battery goes down to 10%, it turns off. Like standby mode. Its not turned off, but you cant use it, you cant make it function, it will only work again when you plug it in. Its not rebooting, its like nothing happened. Anyway to disable this?
Since we be talkin bout dem batteries (hahaha okay), anytips how to superboost their lives? I've been experiencing less than 8 hours on heavy use.
Using Jellyblast 3.0.4 and kuro kernel. (teach me a surefire way to overclock 1.24 ghz (
Mine use to do same thing and the only solution i had was flashin a diffrent rom
Sent from my GT-S5360
Install latest version of kuro kernel using recovery. U can download it from the developement section
Sent from my GT-S5360 using xda app-developers app
pochic1996 said:
Heya XDA. Since I've installed JellyBlast, I've been loving it. But everytime my battery goes down to 10%, it turns off. Like standby mode. Its not turned off, but you cant use it, you cant make it function, it will only work again when you plug it in. Its not rebooting, its like nothing happened. Anyway to disable this?
Since we be talkin bout dem batteries (hahaha okay), anytips how to superboost their lives? I've been experiencing less than 8 hours on heavy use.
Using Jellyblast 3.0.4 and kuro kernel. (teach me a surefire way to overclock 1.24 ghz (
Click to expand...
Click to collapse
Hi i was in jellyblast i successfully installed latest version for merruk kernel deluxe.
Without bug and no lag
Just follow my steps : ( working )
-flash fresh stock rom
-flash jellyblastv 3
-update jellyblast to 3.0.4
-flash merruk kernel pre-final 2.0 via odin or method from mai77 ( CWM)
-Backup your rom via CWM
-Flash via CWM ext4convertsigned.zip ( its kernel + Ext4convert + reset bin)
-restore your system/data and cache via backup/advance restore. Do not restore boot.img
-flash module elite.zip
- its done
Here the merruk kernel pre-final 2.0 http://forum.xda-developers.com/atta...9&d=1336694938
Here the module from elite version http://forum.xda-developers.com/atta...4&d=1349642823
Here the merruk kernel deluxe version #206 http://www.mediafire.com/?c5nl1cf4cye6px4
pochic1996 said:
Heya XDA. Since I've installed JellyBlast, I've been loving it. But everytime my battery goes down to 10%, it turns off. Like standby mode. Its not turned off, but you cant use it, you cant make it function, it will only work again when you plug it in. Its not rebooting, its like nothing happened. Anyway to disable this?
Since we be talkin bout dem batteries (hahaha okay), anytips how to superboost their lives? I've been experiencing less than 8 hours on heavy use.
Using Jellyblast 3.0.4 and kuro kernel. (teach me a surefire way to overclock 1.24 ghz (
Click to expand...
Click to collapse
hmm,i dunno your problem.
but didn't have it in mine.
i even still browsing at battery just 5%,until it dropped (bad behavior for battery)
so,maybe you can try to install other kernel
Sent by Schoolar Boy who wanna help and being a devs
hariskoirala said:
Hi i was in jellyblast i successfully installed latest version for merruk kernel deluxe.
Without bug and no lag
Just follow my steps : ( working )
-flash fresh stock rom
-flash jellyblastv 3
-update jellyblast to 3.0.4
-flash merruk kernel pre-final 2.0 via odin or method from mai77 ( CWM)
-Backup your rom via CWM
-Flash via CWM ext4convertsigned.zip ( its kernel + Ext4convert + reset bin)
-restore your system/data and cache via backup/advance restore. Do not restore boot.img
-flash module elite.zip
- its done
Here the merruk kernel pre-final 2.0 http://forum.xda-developers.com/atta...9&d=1336694938
Here the module from elite version http://forum.xda-developers.com/atta...4&d=1349642823
Here the merruk kernel deluxe version #206 http://www.mediafire.com/?c5nl1cf4cye6px4
Click to expand...
Click to collapse
Hi dude, instead of copy-pasting whole posts of another user can you please provide a link to the post? It certainly won't hurt you!