Hi Guys,
I tried to flash the phone with kyrillos rom 7.0 OC Version but my phone freezes at initial screen GT5801 and can listen cracking booting sound.
I tried to re flash it but again the same thing happened. Do any one have the solution for this problem.
Thanks In Adv.
Use the non Oc version because oc can freeze your phone.
Sent from my GT-I5800 using XDA App
dilzo said:
Use the non Oc version because oc can freeze your phone.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Thanks dilzo . I tried to again flash the phone with JP2 official .tar downloaded from samfirmware. But that is again getting freeze after Samsung booting animation.
Should i again reflash it with non OC version. There are two part of Kyrillos rom. If you extract the first part the second part also get extracted. Please correct me if i am wrong.
Make wipe data after flashing when phone boot ino CWM. If this won't help, flash non-oc version, wipe data, then flash oc kernel (is in the kyrillos zip in "extras" folder - i don't remember exactly)
Last time i had v4. Now I am trying to install v7 but first time it got freez at SAMsung boot screen, with non OC version I am getting freez after samsung boot screen. After flashing I wiped calvik cache or what and the cache patrition.
I used creeds rom and repencis rom...
den i tried evo x2 rom which has savie kernel(wht my 'about phone' shows)...
den i tried to flash creed, repencis bt phone stuck at logo
even i tried to restore my stock rom via CWM recovery bt stucked at logo
aft dat i tried to flash it again wid evo x2, it worked...
so hw can i get back to creed or repencis(which hav stock kernel i guess)
plzzz help me...
sushantjayade said:
I used creeds rom and repencis rom...
den i tried evo x2 rom which has savie kernel(wht my 'about phone' shows)...
den i tried to flash creed, repencis bt phone stuck at logo
even i tried to restore my stock rom via CWM recovery bt stucked at logo
aft dat i tried to flash it again wid evo x2, it worked...
so hw can i get back to creed or repencis(which hav stock kernel i guess)
plzzz help me...
Click to expand...
Click to collapse
I think you must have the stock rom to flash creeds
wait for other answers, i am a noob too !
As what the previous comments reflash to stock rom because evo x2 have its own kernel unlike repen and creed that don't have maybe savie isn't compatible with this rom.
Sent from my GT-S5360 using xda app-developers app
Maybe you can try to just restore the stock kernel ?
If it's don't work the only way i see is to reflash the stock rom. See the Doky73 thread.
For just restoring the stock kernel :
- Download a stock rom from Doky73 thread.
- Extract the boot.img from the pda.rar of the rom and copy it on the root of the sdcard.
- Download CWM and the Update Kernel.zip ,you can found theim in the 3eme post of the merruk thread (kernel flash via cwm by mai77)
- Boot in recovery and use CWM
- Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
- After successful kernel up press power to return to CWM
- Press Reboot now, and your kernel is updated
- Reboot again in CWN and retry to flash creeds...
How to flash merruk kernel 2.5 on hyperion rom? im always stuck at galaxy y boot logo, even if i followed the instructions carefully. Any solutions? Thanks
Go to general section .mali27 has started a thread expecially for instructions to flash meruk 2.5.
Pls search b4 ask
Sent from my GT-S5360 using xda app-developers app
aeonflux888 said:
How to flash merruk kernel 2.5 on hyperion rom? im always stuck at galaxy y boot logo, even if i followed the instructions carefully. Any solutions? Thanks
Click to expand...
Click to collapse
1, reboot to recovery mode.
2, back up
3, flash merruk kernel 2.5 (make xure you have merruk kernel 2.0) installed it via odin PDA
4,restore
5,reboot... done
- Turn off your phone,
- Go to cwm
- Backup your rom
- Flash your ext4convert signed.zip reboot
- Restore System/data and cache
- Flash Elite module.zip
- Reboot
with this kernel you have only 249 of ram and some random reboots, but the overclock is awsome
Is there a way to force Galaxy Y into Recovery mode when we cannot boot into Recovery mode by using the three button combo? I am asking this because everytime we flash a custom kernel that has a permanent custom recovery mode, we need to always flash stock rom via odin to change to some other custom rom or kernel. For example, Merruk kernel has its own custom recovery mode. Now if we want to change back to some other kernel or custom rom that have its own kernel after flashing merruk kernel, we always need to first flash stock rom via odin. If we directly flash another kernel or custom rom that has its own kernel, we got stuck at Galaxy Y screen and after that we won't be able to boot into recovery mode again. Thanks in advance.
Sent from my GT-S5360 using xda premium
I have tried it many times in savies kernel...
By trying that boot recovery option...
But no luck...however in some kernels like kuro kernel...
It is possible as they have temporary cwm...
**rooting is new for me...and i am noob to root...**
Anyone having a solution to this problem?
Sent from my GT-S5360 using xda premium
I don't have any problem... I used merruk 2.0 which has permanent CWM.. Then i flashed Kuro kernel which have stock recovery got no problem...
solution- if u use any kernel which have cwm then flash a kernel which have stock recovery like kuro.
Then flash your rom......
Btw i never got this tupe of problem.
thadoukuki said:
Anyone having a solution to this problem?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
First of all... you can flash any rom or kernel when you are on kernel with inbuilt cwm...
Otherwise what's the point of making a inbuilt cwm?
Just make sure you have mounted system in mount options before flashing any rom or kernel...
I'm sure it will definitely get installed... make sure you mount system before flash...
--------------------------------------------------------------------------
nitubhaskar-->Deadly.
★Nothing is True... Everything is Permitted★
Muffins..? Yuumy!
No problems for me to switch back and forth between mt and other kernels - in fact i do it often and i don't remember the last time i used odin
Hello Every One ..
I want to install merruk kernel 2.5 on hyperion rom 7.x .
I tried my best, but got failed.
First listen to me.
Iam not a noob, I have used merruk kernel 2.5 with cod rom .
I know the whole procedure.
I am doing the same.
I want to tell 1 thing more, that is, i can't install merruk 2.0 too :/
when i flash it via CMW, it says installation done, completed etc..
but in settings it stil shows savie :S
having savie, and keeping backup, i installed merruk kernel 2.5, and then restored system, data, cache, .. all got fine :S
but nothing happend after boot logo :S
it stucked. i did my best.. nOw what to do. plz tell me !
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
kimerika said:
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
Click to expand...
Click to collapse
First of all thnx for helping me!
2ndly, i did the same steps on hyperion rom 7.x
( NO REBOOTS )
but still got the same boot loop, i mean I waited for 5 mins, but nothing happened.
Then i tried to install the merruk kernel of Hyperion 7 GM FINAL.
I did the same as u told, but when i was restoring the system, it gave an error.
Now Iam again flashing Hyperion 7.X and again flashing Merruk Kernel.
this i will wait for 10 - 15 mins after applying the whole procedure. Lets pray :S
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
ok...ok....ok..
i think u just right,,,one xda member flash the same way just like yours and he did succed,,
but i my case i use my steps to hyperion and ussr and i succed,,
on the second thought,, maybe MT2.0 PRE is not required to flash after all,because MT2.5 ext4 converter signed.zip has a boot.img..LOL
what do you think,,
my procedures is took by mai,,
Yeah Rite.. btw tell me 1 thing, is there any solution of this..
when iam over with my mob, and make it lock, (SCREEN OFF) , then when i press the menu button , it takes more tym to show the screen. why is that so :S and how to overcome it.. iam using cpu tuner ..
that normal,, cause mt2.5 has wakeclock issue
mastiyard said:
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
Click to expand...
Click to collapse
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
you forgot 1, ext4 converter-signed.zip,,,that include MT2.5 which have the freq of 1.248MH..
follow my TUT above
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Man if u are not succeeded with the procedure of SENIOR MEMBER. Than follow me..
flash the rom, then boot it 1 time..
than backup it..
then install elite modules, and ext4_signed.zip.
then reboot the recovery..
now restore system cache and data..
and you will be succeeded, indeeeeed .
kimerika.. tell me 1 thing man ..
now i want some customization in my STATUS BAR..
i want yellow colored battery icon and signal and wifi icon..
what the problem is, i tried status bar greper 1.8, and found some icons for signal and battery from the internet..
But due to status bar greper 1.8 , i can't change wifi icon :S
and with some patches that include status bar greper 1.8, by them, wifi icon gets hide :S i can't see it on the status bar..
leave it..
just help me in getting yellow coloured battery icon, signal icon and wifi icon :/
My own !
When i flashed Hyperion 7 GM i first go on overclocking...
So this is the procedure i did...:laugh:
1.Download PDA_merruk.tar and Ext4 converter.zip
2.Place Ext4 converter.zip in the root of your SD Card and place PDA_merruk.tar to your computer...(anywhere you like!)
3.Boot into CWM
4.Go to Backups and Storage and do a Backup
5.Go to Install zip from SD Card and choose zip from SD Card
6.Find Ext4 converter.zip
7.Flash it ! :laugh:
8.After that reboot
9.It will stuck on bootlogo so don't worry just remove the battery and insert it again..
10.Go to ODIN Mode (Volume Down,Home Key and Power Button)
11.Then press Volume up when the ODIN Mode shows up..
12.Get your USB Cable then insert it to your computer...
13.When you see the 0:[COM:XX] it means that your SGY is connected
14.Go to PDA then choose PDA_merruk.tar
15.Then press START
16.After that it will say PASS! and remove your SGY
17.You will need to remove and insert your battery again
18.Use the three button combo !
19.You will see the permanent CWM..
20.Go to Backups and Restore and Choose Advance Restore then choose the backup that day then restore system ONLY!
21.After the Restore go Wipe Data/Factory Reset
22.Wipe Cache
23.Go to Advanced then choose Wipe Dalvik Cache
24.Wide Battery Stats
25.Reboot system then you are good to go !
Works Always and NEVER fails me ! (works also on stock ROM!)
You will also get overclocked after doing this steps BTW !
Notes :
1.Must have 100% battery life
2.Must have ODIN 1.85
3.Must have Samsung Drivers
You can all get these files from Mr. Google
Required files :
Ext4 converter.zip
PDA_merruk.tar
ODIN 1.85
Samsung Drivers
Search them by USing Mr. Google.....