Related
Here's something that we discussed in IRC earlier tonight. If you want to go back from Kaoscinate to 2.1 without the use of Odin (which is a somewhat long process), follow this.
make sure you have the stock cwm's (the green one) update.zip on the sdcard. Hit the update from update.zip button on the voodoo cwm (the red one) and go to the stock cwm. Now you should be able to format all the partitions, but if you try to reboot from here, it'll error out (it did for me atleast). Go back to the voodoo cwm, and install your rom from here and reboot.
If it bootloops, go back to the voodoo cwm, disable the lagfix and let it reboot and run. After that go back to cwm and install your rom, make sure it works this time and go enable the lagfix again.
Should be it.
Good advice!
My samsung fascinate has VooDoo on it. I did not put it there, I am not comfortable with ADB shell and the commands that go with it. Its a D101 that HAS to run at 800Mhz with Voodoo (Not the 1.2 the specific voodoo is) at 1.2 nothing runs and constantly redraws the homescreen.
I tried the automatic uninstaller, and the red recovery stays to haunt. I've tried other kernels while disabling Voodoo.
My phone was running fine up until recently where it would have random reboots and have trouble booting back up.
I came across flashing back to stock with ODIN. the system file went over fine, and I even did the stock kernel and (PIT)
i Just flashed them all through ODIN.
The phone boots up fine to the main screen, where then I get the error message about a UID ? (Sounds dirty) it says to wipe data or my phone will have inconsistencies. Then gives me a button that says "feeling lucky"
Message as follows "UIDs on the system are inconsistent, you need to wipe your data partion or your device will be unstable" Only button to click is I'm feeling Lucky
everything force closes, red voodoo still shows up in recovery. What am I missing or doing wrong?
I bought this phone this way and like i said i know NOTHING about ADB or all those commands, etc.
Can somebody help me out? I'd even gladly send it to a trusted member for repair with a donation, of course.. until then I'm using my OLD bb curve
http://forum.xda-developers.com/showthread.php?t=867648
thats full d101 thread
http://forum.xda-developers.com/showthread.php?t=885262
thats full dj05 thread
both should be able to get you back to stock through odin then you can restart what you did. personally i keep both handy since i already had to use them due to an error that cause the phone to freeze up completely at the samsung logo. hope that helps
make sure you use the pda option in odin and not the phone..aparantly using the phone option can really screw things up
I did another factory data reset, and my UID message vanished. Although, VooDoo is still in recovery even after flashing D101 through ODIN.
My phone gave me the notification of an update (DL09) It downloaded it, and when it went to install it - it booted right into the red VooDoo recovery.
I'm going to flash DL09 through ODIN now, but I'm thinking VooDoo isn't about to go anywhere.
BrianWM said:
I did another factory data reset, and my UID message vanished. Although, VooDoo is still in recovery even after flashing D101 through ODIN.
My phone gave me the notification of an update (DL09) It downloaded it, and when it went to install it - it booted right into the red VooDoo recovery.
I'm going to flash DL09 through ODIN now, but I'm thinking VooDoo isn't about to go anywhere.
Click to expand...
Click to collapse
are you disabling voodoo before flashing these new kernels?
Powell730 said:
are you disabling voodoo before flashing these new kernels?
Click to expand...
Click to collapse
Yes, VooDoo is disabled.
BrianWM said:
Yes, VooDoo is disabled.
Click to expand...
Click to collapse
so did you use the odin files and flash it via PDA in odin? if so, did that revert you to total stock? i believe those .md5 files contain the stock recovery.
EDIT:
do you know what version of voodoo you're using?
http://forum.xda-developers.com/showthread.php?t=804784
that guide should help you, if you're using voodoo 5 there is a guide there that specifcally says "if you're still getting the red voodoo menu flash this file then flash a nonvoodoo kernel." check that article out by ady if you havent already.
flash voodoo boot right into recovery. adb shell into the device and type
cat /voodoo/partition_tables/fascinate > /dev/block/mmcblk0
And then reflash everything with Odin.
Also one of adrynalyne's di01 packages doesnt flash recovery. So either flash my dj05 or go to adrynalyne's cwm odin thread and flash a regular update.zip cwm tar.
Sent from my SCH-I500 using XDA App
A proper, 100% full Odin tar will replace everything on the phone, including voodoo, and the partitions that it formatted as ext4 will now be RFS again. Since the full DJ05s and DL09s came out I use it as a first resort instead of a last resort. Flash the full tar, CWM, the kernel, then nandroid and I am good to go in about 15 minutes.
Just to throw my two cents' worth in here, red CWM is not synonymous with Voodoo. It's just the version of Clockworkmod recovery that is capable of working when the lag fix is enabled. It's normally installed with Voodoo kernels, but the Voodoo lagfix itself can be completely disabled, and red CWM will still work just fine. If you got the OTA notification for DL09, it sounds like you have a stock ROM, which means Voodoo is actually gone, so you just need to restore the recovery from red CWM back to stock so that the OTA patch will be able to install properly.
ivorycruncher said:
Just to throw my two cents' worth in here, red CWM is not synonymous with Voodoo. It's just the version of Clockworkmod recovery that is capable of working when the lag fix is enabled. It's normally installed with Voodoo kernels, but the Voodoo lagfix itself can be completely disabled, and red CWM will still work just fine. If you got the OTA notification for DL09, it sounds like you have a stock ROM, which means Voodoo is actually gone, so you just need to restore the recovery from red CWM back to stock so that the OTA patch will be able to install properly.
Click to expand...
Click to collapse
Presentation is everything, thanks for the info!
I don't know if this is specific to his rom, but I tried getting a new busybox too but it still doesn't work.
From CWM app, CWM recovery, and terminal, they all don't work.
Anyone got an idea?
are you using the NEW CWM? Does it boot with green text or red text??
New CWM released with DL30. Green ofcourse as there is no voodoo kernel released currently for DL30.
I was previously running a full stock phone, unrooted, with the OTA DL07 update. I flashed the stock DL30 rom leak, by flashing CWMRecovery_DJ05_DL09.tar.md5 via odin, then applying update.zip (not the new one). Once in clockwork recover, I tried to apply the new_cwm.zip, but I got large zoomed in blue text that I couldn't read, and nothing really happened.
After a few reboots, I learned that I the DL09 I got OTA, somehow restores the recover, and I have to use odin every time before I plan on getting into clockwork. Anyways, I eventually just decided to ignore the new_cwm.zip, and just flash the DL30.zip via the old cwm. It worked, I ran DL30 for a few days, but today I wanted to wipe battery stats, but I can't get back into cwm.
I can't flash CWMRecovery_DJ05_DL09.tar.md5 anymore, it fails, and then my phone won't boot, until I flash Stock-i500-VZW-Recovery.tar.md5, upon which I can boot my phone up normally.
So my question is, how can I get cwm back? And should I use the old update.zip I've been using, or should I replace it with the new_cwm.zip?
Download ROM Manager from the market, install cwm through it. Then reboot into recovery (do a nandroid backup), Wipe data, install DL30 rom, reboot, go back into cwm, flash the new_cwm.
Ok .. I am not sure if this is the right area or not .. but I have been tring to install the DL30 onto my fascinate but it will go to a blue screen and when I choose update.zip it will tell me failed to
open /sdcard/update.zip no such file or directory?
Signature verification failed installation aborted .. any ideas how to make this work?
Thanks for you help in advance
kscheryl said:
Ok .. I am not sure if this is the right area or not .. but I have been tring to install the DL30 onto my fascinate but it will go to a blue screen and when I choose update.zip it will tell me failed to
open /sdcard/update.zip no such file or directory?
Signature verification failed installation aborted .. any ideas how to make this work?
Thanks for you help in advance
Click to expand...
Click to collapse
download rom manager from the market and use it to install cwm
thefunkbot said:
Download ROM Manager from the market, install cwm through it. Then reboot into recovery (do a nandroid backup), Wipe data, install DL30 rom, reboot, go back into cwm, flash the new_cwm.
Click to expand...
Click to collapse
Just tried, when I launched ROM Manager, it said Current was 2.5.0.4, Latest was 2.5.1.0. I clicked flash, it downloaded, and Current changed to 2.5.0.4. I clicked reboot into recovery, phone reboots, default recover comes up, starts to apply update.zip, and the signature fails.
Same here ... even when I use rom manager with the CWM it is still coming up with the signature error. It is only going to the blue screen not the green screen but it is also not allowing me to install the update either. Help!
Dunno why so many folks are having issues...but make sure you have root and dj05 or dl09. Download rom manager and new_cwm. Flash recovery while selecting your phone in rom manager. Then reboot in recovery from rom manager install new dl30 and then new_cwm. If you cant reboot from rom manager, do it manually and select update.zip to get to cwm
Ps...make sure you never had voodoo or it is niw disablef...one of the two.
thefunkbot said:
download rom manager from the market and use it to install cwm
Click to expand...
Click to collapse
That doesnt work to just do it through rom manager when your on dl09... your confusing people by telling them that. To get into cwr you have to flash it with odin, boot into stock recovery, do the update.zip, then boot into cwr. You cant let the phone boot into the os until you get to cwr and do all your flashing. Dl09 has something built in that makes it not work the way it used to. What you are saying is the original instructions for dl30, but have since been modified like i said... its somewhere in this forum,
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Right, the problem is that I'm already running DL30, and I can't flash the clockwork recovery for dl09/dj05 via odin, it fails and my phone won't boot until I flash the stock recovery via odin. Anything I try through rom manager simply fails the signature verification.
Sent from my SCH-I500 using XDA App
I have the exact same problem as OP, I tried to flash DL30.zip and the new_cwm.zip. DL30.zip flashed like a charm, but for some reason after i flashed new_cwm.zip, I'm not able to get into cwm at all, it just sends me to stock recovery.
Heres the thing, whether your on dl09 or dl30 (which is still dl09) you cant let the phone reach the os between flashing cw and applying update.zip, and then booting into cwr. So the only way is to flash cw via odin, stock recovery update.zip, cwr. Another way would be to get back to dj05, this shouldnt have the built in recovery reset, and dl30 is compatible with it.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
ziggy484 said:
Heres the thing, whether your on dl09 or dl30 (which is still dl09) you cant let the phone reach the os between flashing cw and applying update.zip, and then booting into cwr. So the only way is to flash cw via odin, stock recovery update.zip, cwr. Another way would be to get back to dj05, this shouldnt have the built in recovery reset, and dl30 is compatible with it.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Click to expand...
Click to collapse
What you are trying to say is if I flash the DL09 cwm via ODIN to my DL30, I would be able to get into cwm?
Avelnan said:
What you are trying to say is if I flash the DL09 cwm via ODIN to my DL30, I would be able to get into cwm?
Click to expand...
Click to collapse
No... first of all you need the new cw that works with froyo if you plan on using it while on froyo, then you still have to follow the steps in my previous post because your still dl09. If you are on froyo why do you need cw right now?
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
ziggy484 said:
No... first of all you need the new cw that works with froyo if you plan on using it while on froyo, then you still have to follow the steps in my previous post because your still dl09. If you are on froyo why do you need cw right now?
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Click to expand...
Click to collapse
Because after I flashed DL30 all my apps were still there, even though I strictly remember wiping my phone clean. Also I want to flash Blackhole 4.0.1 rom. I just want those apps gone because they seem to cause problems, apparently after wiping EVERYTHING is still there
Avelnan said:
Because after I flashed DL30 all my apps were still there, even though I strictly remember wiping my phone clean. Also I want to flash Blackhole 4.0.1 rom. I just want those apps gone because they seem to cause problems, apparently after wiping EVERYTHING is still there
Click to expand...
Click to collapse
You could just uninstall the apps through task manager... and then you need the new cwm to flash more roms, again follow the steps i previously posted to get to cwr
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
ziggy484 said:
You could just uninstall the apps through task manager... and then you need the new cwm to flash more roms, again follow the steps i previously posted to get to cwr
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Click to expand...
Click to collapse
So I DO have to flash the DL09 CWM via ODIN. Where can I get this file, and ODIN?
Avelnan said:
So I DO have to flash the DL09 CWM via ODIN. Where can I get this file, and ODIN?
Click to expand...
Click to collapse
search this site for both, there are links everywhere
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
ziggy484 said:
search this site for both, there are links everywhere
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Click to expand...
Click to collapse
That's what I tried to do before I even started this thread, as I said in my original post. The DL09 cwm will not flash via oden. It fails. And then my phone just shows a computer/phone icon, and refuses to boot.
I have to flash the stock recovery via odin to get my phone working again.
And the reason I need cwm if i'm already running DL30, is twofold. I'd like to switch roms, AND I need to wipe my battery stats.
Dewmgaze said:
That's what I tried to do before I even started this thread, as I said in my original post. The DL09 cwm will not flash via oden. It fails. And then my phone just shows a computer/phone icon, and refuses to boot.
I have to flash the stock recovery via odin to get my phone working again.
And the reason I need cwm if i'm already running DL30, is twofold. I'd like to switch roms, AND I need to wipe my battery stats.
Click to expand...
Click to collapse
Same here bro.
Dewmgaze said:
That's what I tried to do before I even started this thread, as I said in my original post. The DL09 cwm will not flash via oden. It fails. And then my phone just shows a computer/phone icon, and refuses to boot.
I have to flash the stock recovery via odin to get my phone working again.
And the reason I need cwm if i'm already running DL30, is twofold. I'd like to switch roms, AND I need to wipe my battery stats.
Click to expand...
Click to collapse
Have you tried getting to dl09 via odin before flashing the dl09 cw? And once you get to dl30 you need the new cw to do anymore flashing while on froyo. try flashing stock dl09 (not di01) then flash dl09 cw, then stock recovery update zip, then flash dl30, then flash new cw, then reboot. Do one after the other without booting into the os at all. Once your on froyo you still wont be able to just hold the buttons and get to cw i dont think... you may have to do it the hard way like i just explained.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
[RED-CWM] (not orange)
Alright sick of scanning 3 different threads trying to help people with the new Clockwork manager I decided to write up this guide. This was tested from stock, I flashed back to stock to test both these methods, and they should work for everyone.
Stock versions tested: DI01 (stock), DJ05 (stock), odin method works flawlessly on these versions. cwm was not replaced by sammy kernel.
Stock DL09 will remove cwm on reboot, install a different kernel adryn's should work, pick your poison here: http://forum.xda-developers.com/showthread.php?t=915709 flashed cwm via odin. install kernel, then rebooted, if you get stock recovery flash via odin one more time.
Nonvoodoo EB01 currently some people report it will boot to blue recovery after installing new roms. nonoodoo users should leave, http://dl.dropbox.com/u/2056318/update.zip on the root of there sdcard that way after a new install of a rom you can get back to cwm. after applying udate.zip, install cwm-recovery-ALL.zip. (Thanks Landshark68)
To get to stock use adrynalyne's DI01 package get it here: http://forum.xda-developers.com/showthread.php?t=867648 flash via odin.
First I would like to thank jt1134 for fixing up the new cwm get your perferred version here: http://forum.xda-developers.com/showthread.php?t=942021
Odin method (preferred method stock users do this one!)
1. Alright let’s do this, head over to jt’s original post and download the cwm-recovery-ALL odin:
2. Plug phone into PC and turn off phone
3. Pull battery in phone and then press the down volume button
4. Open odin on PC and press PDA load cwm-recovery-ALL.tar, DON’T MESS WITH ANY OTHER SETTING! Then hit the start button.
5. Boot into recovery (cwm) do this by holding both volume keys plus the power button till you see Samsung screen, you can let go then.
6. Congrats your done now install your custom roms, kernels, radios, and other various things!
Clockwork manager method (only if you have cwm installed already)
1. Copy new cwm-recovery-ALL.zip to root of SD card. (do not need to rename!)
2. Boot into recovery
3. Choose install zip from sdcard
4. Choose cwm-recovery-ALL.zip
5. Reboot your phone and delete update.zip from root of SD card, and recovery-update.zip from clockworkmod folder.
The cwm should be red, and should say voodoo no matter if you have a voodoo kernel or not.
Rom manager will not boot your phone to recovery, install a new shutdown menu that includes boot to recovery or do a manual boot to recovery.
The new clockwork manager installs to the boot partition of the phone that's why you no longer need the update.zip file. Do not flash the cwm from Rom manager, it’s not needed folks, and will put your phone into an endless boot. The cwm jt gave us is customized for our phones.
Post your questions here I will be happy to answer them.
Below I attacked the clockwork manager files, plus odin3 v1.3 but visit jt's OP and give him a thanks, I'm just the translator, hes got plenty of other crap to do rather than test this out.
I am not responsible for any bricked, broken, or abducted phones.
Tried it, works fine. Took a bit on that first boot into recovery after the install was run (already had cwm installed), you know that held breathe of "did it work"!
vlucchetti said:
Tried it, works fine. Took a bit on that first boot into recovery after the install was run (already had cwm installed), you know that held breathe of "did it work"!
Click to expand...
Click to collapse
just be sure not to flash cwm from rom manager application, or you'll be holding your breath till you black out
Takafiji said:
just be sure not to flash cwm from rom manager application, or you'll be holding your breath till you black out
Click to expand...
Click to collapse
Seriously thinking of deleting ROM Manager altogether. I did dl Adryn's revised ROM Mgr but may switch to doing everything through cwm.
I think the slight delay after the double samsung flash is the program working through blue in the background so it jumps right to red afterward.
Adryn's kernel isn't working for me. But that's what searching is for.
I also owe you a huge thanks for all your help earlier.
Sent from my SCH-I500 using XDA App
lfrench0 said:
Adryn's kernel isn't working for me. But that's what searching is for.
I also owe you a huge thanks for all your help earlier.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
no prob thats what we're here for.
any custom kernel built for dj09 will work. only use a kernel for your raidio/rom version ie: dI01, dj05, dj09, dl30, ebo1 etc...
Hey Takafiji,
I posted a similar thread over at Android Central about the same time as yours here at xda. I discovered this ability to boot directly to red cwm, and I put together the how-to thread and everything was great until I booted to recovery one time and saw stock blue (2e) recovery. I played around with different options, but couldn't completely get rid of blue recovery. I decided to do some research in jt1134's thread and saw the link to yours and read everything here. I have tried every method in your thread and jt1134's thread and I keep running into the same problem. I can install the new cwm just fine and I can keep booting directly into red cwm just fine until.........I flash a new ROM. I can flash themes, patches, add-ons no problem, still able to boot to red cwm. As soon as I flash a new ROM, I boot to stock blue recovery. The only ROM I have been flashing is Adrynalyne's superclean 2.4. I read in jt1134's post that flashing a stock kernel will revert you back to stock blue recovery. The kernel in Adrynalyne's sc 2.4 is the farthest from stock we can currently get in nonvoodoo EB01. My guess is we will not be able to boot directly to the new red cwm on nonvoodoo until the devs get their hands on the source code and we get some custom nonvoodoo kernels. Any thoughts? Thanks
landshark68 said:
Hey Takafiji, Any thoughts? Thanks
Click to expand...
Click to collapse
ummm not sure here, you could try a voodoo kernel, they work wonderfully. how are you rebooting to recovery? rom manager doesn't work all too well in that area, try using the power menu and reboot to recovery that way. i will do some more testing but ive been jumping around on different eb01 roms just fine. Is it all roms or just superclean ones?
Takafiji said:
ummm not sure here, you could try a voodoo kernel, they work wonderfully. how are you rebooting to recovery? rom manager doesn't work all too well in that area, try using the power menu and reboot to recovery that way. i will do some more testing but ive been jumping around on different eb01 roms just fine. Is it all roms or just superclean ones?
Click to expand...
Click to collapse
I got rid of Rom Manager as soon as we got the long press power button menu with recovery in it. The only ways I boot to recovery are long press power and holding volume down, volume up, and power buttons.
ummm have you tried applying a older cwm after booting to blue recovery? maybe if you booted to that then installed jt's new cwm you'd be set. just a thought. http://dl.dropbox.com/u/2056318/update.zip should work, if it comes up unsigned we will have to explore different options. I'm trying to figure out why its going blue with a non-stock kernel, the new cwm installs to the boot partition.
Takafiji said:
ummm have you tried applying a older cwm after booting to blue recovery? maybe if you booted to that then installed jt's new cwm you'd be set. just a thought. http://dl.dropbox.com/u/2056318/update.zip should work, if it comes up unsigned we will have to explore different options. I'm trying to figure out why its going blue with a non-stock kernel, the new cwm installs to the boot partition.
Click to expand...
Click to collapse
Already tried that if the old cwm you are linking me to is the new red cwm for froyo we had before the current one. Loaded that cwm via ODIN, had new red on base of sd card, installed via old red cwm, no luck, went back to blue as soon as i flashed sc 2.4. The only thing I'm thinking is I don't think the kernel in sc 2.4 is truly a custom kernel. I believe I read the kernel in 2.4 is still the stock kernel, just slightly modified by Adrynalyne. Thanks.
landshark68 said:
Already tried that if the old cwm you are linking me to is the new red cwm for froyo we had before the current one. Loaded that cwm via ODIN, had new red on base of sd card, installed via old red cwm, no luck, went back to blue as soon as i flashed sc 2.4. The only thing I'm thinking is I don't think the kernel in sc 2.4 is truly a custom kernel. I believe I read the kernel in 2.4 is still the stock kernel, just slightly modified by Adrynalyne. Thanks.
Click to expand...
Click to collapse
have you tried flashing stock di01, then jumping to a stock eb01, maybe that would work. not sure but i know the dl09 recovery overwites cwm. maybe you just got parts of it still stuck there...
Sorry wish i was a c programmer i'd jump on board and start helping create a custom kernel.
Takafiji said:
have you tried flashing stock di01, then jumping to a stock eb01, maybe that would work. not sure but i know the dl09 recovery overwites cwm. maybe you just got parts of it still stuck there...
Sorry wish i was a c programmer i'd jump on board and start helping create a custom kernel.
Click to expand...
Click to collapse
No problem. I'm just going to keep going through blue recovery to get to red cwm until we get some custom nonvoodoo kernels. I updated my OP to advise everyone there on nonvoodoo to put update.zip back on the root of their sd card and do the same for now. Thanks again for the brainstorming and ideas.
EDIT- Also to let you know, yes I already tried flashing back to DI01 then to EB01. We are definitely thinking along the same lines.
Well now I'm totally gorked up. I followed Zacisblack's method with your addition of doing the ODIN install first. Now when I get blue recovery and hit apply sdcard:update.zip I go to green cwm. Trying to figure out a solution to that now.
EDIT - fixed that problem. Fortunately I still had a copy of the cwm_froyo.tar
I also have the same issue when flashing a new rom. It always goes to blue recovery.What I have to do every time is in blue cwm go to apply sdcard/update.zip which gets me in green cwm. Then I go to choose zip and scroll down to clockwork and choose cwm-recovery-all and flash it again then scroll down to update.zip and flash it then i go to applysdcard/update.zip and flash that then i reboot. Then next time i boot into recovery it always goes straight to red cwm. Sounds like a pain (and sometimes it is) but in reality it only takes like 5 minutes. I wish i didn't have to do that every time i flash a new rom but thats just part of my routine now as its what works for me.
I might not have to do all of those to get back to red but thats the way i originally got red cwm on my phone from a great write up on jt's thread (sorry but don't remember who did the write up). Maybe I'll experiment with just flashing one of those zip's next time i flash a rom to see if there's a faster way.
But I would really like it if there was a way to just always go to red cwm with a new rom instead of going thru all that.
Fantastic tutorial! Just what I was looking for! Thanks a million!!
Thanks Takafiji! I had just installed the Superclean v2.6 non voodoo and got the stock blue (2e) recovery as well. I tried to apply the update.zip and it took me to orange. I read your original post and it worked wonderfully!
Takafiji Quote from OP:
"Nonvoodoo EB01 currently some people report it will boot to blue recovery after installing new roms. nonoodoo users should leave, <drop box link to update.zip> on the root of there sdcard that way after a new install of a rom you can get back to cwm. after applying udate.zip, install cwm-recovery-ALL.zip. (Thanks Landshark68)"
...now, if I could just figure out why Google Voice can't seem to find my contacts, i.e. voice command "Call Mark Davis", nothing found and defaults to looking on the web.
My phone won't even update the app. When I try it d/l's, starts then aborts saying it isn't properly signed. Guess I'll stay with Adrynalyne's modified one for now.
I used ODIN to flash the new-CWM, but it always seems to boot into blue recovery. Using update.zip gets me into green, which seems to work fine for flashing roms. I've occasionally seen red recovery, but when using update.zip takes me right back to green.
Am I doing anything wrong here?
Thanks for the write-up I flashed recovery with ODIN
In read recovery and working great
again THANKS for the writeup