Related
So today I had to visit the local VZW store to get my SD Card replaced because it was corrupted somehow, and now whenever I mount the sd card on my pc it shows up as a CD Drive and I am unable to access it. I've tried mounting it on another pc and it works perfectly fine though which leads me to believe its something to do with my pc. I have uninstalled and reinstalled the usb drivers 3 times now and getting no where fast, anyone have an idea on what I can do?
Any help would be greatly appreciated!
BTW, running DJ05 w/ Geeknik 1.5.4 kernel with Super clean, but I dont think it has anything to do with it as even stock out of the box it wont detect it.
Buy a new computer
Sent from my SCH-I500 using Tapatalk
bendbowden said:
Buy a new computer
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
LOL!
Try using Windows System Restore to revert back to SEVERAL days before a known-good date. Otherwise you may need to reformat and move this to a Windows Support Forum. If you need professional assistance, i run a tech support company and could have someone walk you through the whole process via phone and internet for $50.
andrew at gtechsupport dot com
/andrew
No access to SD card
I'm having a similar problem with mine as well. I installed DJ05 and ever since I haven't been able to access my card. I'm not an expert but I don't think it's windows. The reason I say that is because I have tried it on two different pc's, one with XP and the other with Win 7. I have no problem connecting my wife's Droid to either machine. The only way I have been able to access my card is by turning on usb debugging plug in the usb cable and reboot the phone. This works one time, so each time I want to access the card I have to repeat the steps. I know this may not be exactly what you are looking for but maybe it will help in your efforts to find a solution. If anyone can help I would appreciate it as well. Thanks
I am willing to bet the OP is running windows XP. This, among many other problems, was apparent when using mass storage devices. Common reasons were system not up to date, or the more common, infected system. Many systems I work with have some malware causing the problem you describe.
After 43 minutes on the phone with Verizon they also couldn't figure out what my problem is. I recieved a new phone today and is well. Thanks for the help.
boot into Clock work recovery (red voodoo one)
Mount SD card
then reboot the phone while plugged in and it should be fine
I am a newb when it comes to android, so please bear with me. I cannot for the life of me get my Continuum dl17 unrooted to mount on my computer. I use a late 2010 13" MacBook pro (10.6.6) as my main rig, with VMWare Fusion installed. I have an XP clone, a Win 7 clone and a Ubuntu clone. I am unsuccessful mounting the phone in any of these.
When I first connect the phone to any of the computers/virtual machines I see what looks like a Verizon CD that tries to install the driver (No Mac Driver | I'll get to that later) The CD the disappears, I swipe down the notifications on the phone and choose Mount the SD to no avail.
I downloaded the drivers from Samsung...nothing. I have tried mounting with USB debugging and without...nothing.
When I try to mount to the Mac I get an error that the Mac cannot read the disk and do I want to initialize. (oddly enough If I unmount the sd card and put it in my card reader I can transfer files just fine using the Mac)
I really want to root the phone, but that is impossible when you cannot get the phone to be recognized my your computer.
Any suggestions would be greatly appreciated. (BTW I have tried everything that I could find to troubleshoot this before I posted)
Thanks
The DL17 update broke the USB functionality on the Continuum. Please, complain LOUDLY to Verizon. If you can get an unupdated phone as a trade-in that might be best.
Sent from my SCH-I400 using XDA App
Weudel,
Thank you! I will complain LOUDLY to Verizon.
Yeah, I don't believe z4root works after the update, either, at least it didn't for me. Don't you have a friend with a pc? It doesn't take long to root...
Sent from my SCH-I400 using XDA App
I have tried to attach the phone to a windows box as well...no dice. How did you root your phone?
Sent from my SCH-I400 using XDA App
buckbuck1 said:
I have tried to attach the phone to a windows box as well...no dice. How did you root your phone?
Sent from my SCH-I400 using XDA App
Click to expand...
Click to collapse
You don't need USB storage to root, just turn on debugging.
Sent from my SCH-I400 using XDA App
Thanks Weudel,
I will give it another shot.
I did get root... I was just not being patient enough
Sent from my SCH-I400 using XDA App
Make sure DRM service is running
Sent from my Samsung Continuum using XDA App
Weudel said:
The DL17 update broke the USB functionality on the Continuum.
Click to expand...
Click to collapse
I have the DL17 on my SCH-I400 and I just managed to connect to it via ADB (thanks to this post).
Can you explain what you mean by "broke the USB functionality"?
I've been running Mac OS Lion for the last almost 2 months on my Alienware M11x, so I know the pain of trying to get the Continuum to mount on a Mac. It won't work unless you're running a Froyo ROM. There isn't an easier answer, believe me, I tried!
Even then, when running Froyo, USB debugging will time out after a few minutes. I'm going to flash EC07, and see if it improves that problem.
Yesterday I was able to connect my Tab to my Win XP PC using the USB cable. I was able to transfer files without difficulty. But, some how I must have changed a setting on the Tab and the Tab is no longer recognized by any of my PC's. I think it is a Sync setting that was changed.
Now, when I connect using the USB cable, the PC says " Found New Hardware MTP"
What settiing do I need to change to get the PC to recognize the Tab?
Check under application > development > usb debugging.
Thanks, I found a USB driver on the Acer site. That seems to have solved the problem. But, that driver was not needed yesteray, and I don't know what "MTP" means?
jostarr said:
Thanks, I found a USB driver on the Acer site. That seems to have solved the problem. But, that driver was not needed yesteray, and I don't know what "MTP" means?
Click to expand...
Click to collapse
Even my Windows 7 boxes do not recognize the a500 without installing the USB driver from the Acer site. Guess you somehow got lucky
Mine always saw the internal 16gb on my Win7 machine. Before the latest updates, I was able to connect with my Win7 PC with no problem and even go to STORAGES and see my 32gb card. It no longer works now. All I see now is SD which is empty.
Which means I cannot copy anything directly to the Micro SD (external_sd). It worked before the last couple of updates. I'm currently running 4.010.10. Now I have to copy it to the 16 internal from the PC and then use the tablet to copy it to the external_sd.
Acer giveth and taketh away.... bummer.
Edit: And yes ... my debugging is on. Always has been. Stock kernel too.
Anyone figure this out yet?
I can't connect on my Win7-64 PC at all.
My 32 bit laptop will connect, but not to SD card, only internal SD.
Try turning development off when using usb go pc which no need for driver, if development is on then you need driver installed.
Sent from my SPH-D700 using XDA App
i can't get my tab to connect to my mac , ive tried both usb ports, ive tried ticking usb-debugging on and off with no luck. Anyone know whats wrong?
If you are having usb issues go to acers web site and go to the drivers and download section for the iconia a500. make sure you look under the honeycomb 3.0 downloads and not the 3.1. as the drivers are not listed under 3.1. download the drivers to your pc (not your tablet)and install. it is an 89 megabyte file so I am sure it has the drivers for everyone in it.
Alos if you are ojn honeycomb 3.0 make sure you get the wi-fi unpate as well while you are there it fixes lots of wi-fi problems.
Remember to thanks if I have helped you.
Thanks for the quick reply in the drivers package There is none for mac and on my fascinate it connects without problem and i never instaled any drivers
Chuban7, Hi well I am not a mac person but I did look around the net a bit and from what I see there are not usb drivers persay for android for mac. but what i have found is there are several companies who mac sync software that connects android to mac. One site to check out is http://www.salling.com/MediaSync/mac/ they have free versions of thier software to use. Give it a try. but there are many other venders of mac to android sync software. seems only way from what I read cant find usb drivers anywhere for ya for any android device.
You can also look through the android market for a free program called"auto mount your sd card" supose to work with mac but I dont know as I dont have a mac
MY personal choice is a program also free on market called "software data cable" again suppose to work with macs and pc's it is completely wireless so no usb cable needed to transfere files so in theory then no usb drivers needed either.
You can also use a program called dropbox allso free it works great just drop files into the dropbox folder and then once they upload go open dropbox on your android and bingo there ya go thier is your files. works in reverse too for android to computer.
Only thing I can figure is that apple hates android and between them and microsoft are tring to run android into the ground so it would stand to reason if you hated a compeating vendor why would you make it easy for them to run thier devices on your software. There is a reason apples Ipod/pad stuff works and others dont apple dont want you to buy android lol.
Just my little conspericy theory stuff good luck hope any of this helps you.
I have the same issue with Linux so it's not a Mac issue. I can plug my Android phone in and it mounts and show up as a USB device that I can then take a file manager and copy/paste/delete files. I use this all the time to transfer files to my phones sd card. Neither the A100 or the A500 will mount as a drive on my Linux machine. I like them but that is pretty much a deal breaker to me.
gramps50 said:
I have the same issue with Linux so it's not a Mac issue. I can plug my Android phone in and it mounts and show up as a USB device that I can then take a file manager and copy/paste/delete files. I use this all the time to transfer files to my phones sd card. Neither the A100 or the A500 will mount as a drive on my Linux machine. I like them but that is pretty much a deal breaker to me.
Click to expand...
Click to collapse
Somehow I feel very doubtful that your Linux OS cannot be set up to mount the a500 as a USB storage device. My Linux skills are rather rusty and outdated, however - so I could be wrong. Can you emulate a stripped down version of windows from your Linux system to get around this?
I can vouch for using software data cable (free app from AM).
Works perfectly with my iMac and should do with PC, since it essentially opens an FTP port on the Iconia (port 8888 by default) that can be accessed by any FTP client on the computer (I use Cyberduck on Mac, FireFTP plugin for Firefox works on all OS's).
If you are rooted, check root access in the app settings to get into the root, and find /mnt/external_SD for the add-on card. It is probably smartest not to leave the root access on all of the time unless you really need it as there is abundant opportunity to create havoc accidentally
Kevin
Sent from my A500 using xda premium
entropy.of.avarice said:
Somehow I feel very doubtful that your Linux OS cannot be set up to mount the a500 as a USB storage device. My Linux skills are rather rusty and outdated, however - so I could be wrong. Can you emulate a stripped down version of windows from your Linux system to get around this?
Click to expand...
Click to collapse
I didn't say it couldn't be done, I just think that it's strange and wrong to make an Android device dependent on having Windows. Yes I suppose I could install Windows in a Vm but I won't.
Using Google (pun intended) I found a fairly simple solution. It's not plug-n-play but is very doable even by an non techie.
There are also some ways of access the Tab file system using a browser and Wifi
kevindt said:
I can vouch for using software data cable (free app from AM).
Works perfectly with my iMac and should do with PC, since it essentially opens an FTP port on the Iconia (port 8888 by default) that can be accessed by any FTP client on the computer (I use Cyberduck on Mac, FireFTP plugin for Firefox works on all OS's).
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Nice app thanks, didn't show up when searching for FTP servers. ;(
The only minor issue I see is that at 1st glance it appears that you don't have access to the external_sd card unless Rooted.
Did work better than any of the other FTP servers I have tried.
Hello all,
I posted a thread yesterday about my issues trying to get my a500 running AOKP to connect to my computer. So, as it is right now, it's got nothing on it, except for a few apps.
I have narrowed it down to the possibility that it is NOT ROM-specific and that it has something to do with USB drivers. I installed the drivers from the Acer US and UK websites, along with the setup.exe drivers from TimmyDean's root folder. None of them worked.
I tried on two different computer, and got the same issues. All I hear is 3 quick beeps after the computer fails to install device driver software.
My question is this: To those of you who are on an ICS ROM/Leak, HOW do you access your SD Card/Internal Storage on your PC?
I really hope somebody could help, I'm pretty stumped.
skadude66 said:
Hello all,
I posted a thread yesterday about my issues trying to get my a500 running AOKP to connect to my computer. So, as it is right now, it's got nothing on it, except for a few apps.
I have narrowed it down to the possibility that it is NOT ROM-specific and that it has something to do with USB drivers. I installed the drivers from the Acer US and UK websites, along with the setup.exe drivers from TimmyDean's root folder. None of them worked.
I tried on two different computer, and got the same issues. All I hear is 3 quick beeps after the computer fails to install device driver software.
My question is this: To those of you who are on an ICS ROM/Leak, HOW do you access your SD Card/Internal Storage on your PC?
I really hope somebody could help, I'm pretty stumped.
Click to expand...
Click to collapse
I installed Android SDK and the google adb drivers. Then I let win7 search the whole system.
Moscow Desire said:
I installed Android SDK and the google adb drivers. Then I let win7 search the whole system.
Click to expand...
Click to collapse
I already have the SDK installed from a whole ago, and I have used ADB recently for my phone, so I guess I should have the updates drivers correct? So I should just go through the device manager and let Win7 search through my C:/ drive? What will it be picking up, the ADB drivers?
Sent from my SGH-T989 using xda premium
skadude66 said:
I already have the SDK installed from a whole ago, and I have used ADB recently for my phone, so I guess I should have the updates drivers correct? So I should just go through the device manager and let Win7 search through my C:/ drive? What will it be picking up, the ADB drivers?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I had google android drivers, Acer drivers, probably 4 different sets. I believe the last I used, were HTC adb drivers. Got pretty frustrated as I couldn't connect 501 with adb. But After I did the full scan on c: drive, it finally picked them up.
It doesn't matter which drivers get used, as long as it works
"Throw enough bullets at the target, and eventually you will hit it"
have you tried going into device manager .Then plug in the Iconia tab once its recognized .Right lick on the device and install the drivers manually.You must know where the drives are extracted to on your computer to do this. Also Not with my acer tab but i have had a issue in the past with usb device drivers .They can sometimes be confused by windows and windows will load driver for the other device and of course fail. So to get around this you can try making sure your phone is connected to the usb port you always use. Then try to plug the iconia into another port. and see If windows will prompt you to install the device.
If still no luck do a search on microsoft tech site.If you can not find it this can also be done by uninstalling all usb devices on the computer in programs and features. Then go to device manager and manually uninstall the usb hubs and devices listed in there. Reboot the computer and windows will put them back.Re install the drives from acer for the iconia reboot. then connect it and see if it will then find the device.
The above is for tech savy users only due to if there is a registry issue the hubs might not install back .
Good luck. and again if you cant follow what i typed above Microsoft tech help has it in step by step instructions. just search for usb device driver install issues and narrow down your issue.
Thank you to BOTH of you! I was getting frustrated that I can't do anything with my tablet! I will definitely try both of these when I get home.
@Erica: I went into Device Manager and it did not recognize my tablet, so I tried to install drivers from Windows Update, and it didn't find any.
@Moscow: HTC USB drivers will work? Really? I don't see why not, but then again, each website has you go through different steps to get your model number, etc.
What I am wondering is, for the scan if the C:/ drive, do I extract only the .exe for the USB drivers?
Sent from my SGH-T989 using xda premium
skadude66 said:
Thank you to BOTH of you! I was getting frustrated that I can't do anything with my tablet! I will definitely try both of these when I get home.
@Erica: I went into Device Manager and it did not recognize my tablet, so I tried to install drivers from Windows Update, and it didn't find any.
@Moscow: HTC USB drivers will work? Really? I don't see why not, but then again, each website has you go through different steps to get your model number, etc.
What I am wondering is, for the scan if the C:/ drive, do I extract only the .exe for the USB drivers?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Generally, the zip file contains driver files for AMD64 and i386. Just extract them to a location on your C: drive. Like C:\android\adb_drivers. Once you extract the driver files, or any other driver files, and you have windows search your computer, it will usually find them, and install them. Takes a couple minutes.
I find this is easier than trying to have windows look in a specific folder. Like I said, I have tons of driver files.
Also, google for Android USB drivers. Will give you the generic Android USB driver pack. Unzip them also, to a diff folder.
skadude66 said:
Thank you to BOTH of you! I was getting frustrated that I can't do anything with my tablet! I will definitely try both of these when I get home.
@Erica: I went into Device Manager and it did not recognize my tablet, so I tried to install drivers from Windows Update, and it didn't find any.
@Moscow: HTC USB drivers will work? Really? I don't see why not, but then again, each website has you go through different steps to get your model number, etc.
What I am wondering is, for the scan if the C:/ drive, do I extract only the .exe for the USB drivers?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
When you say it does not recognize your tablet. Are you saying that when you plug the tablet into the computer thru usb You do not get a prompt to install a Driver? If this is the case Windows thinks it has the proper driver. You will have to find the device in device manager . OPEN it and update driver. You can try to have windows to search . but i disagree with MD on this. But both ways tend to have the same results .TELL it where your drives are such as mine are in c:/android/androidsdk/ xxx
You could also try to install Acer sync from the acer iconia d/laod site If you do this i would change the install path to a sub folder of your sdk install. could be useful in future.
Moscow Desire said:
Generally, the zip file contains driver files for AMD64 and i386. Just extract them to a location on your C: drive. Like C:\android\adb_drivers. Once you extract the driver files, or any other driver files, and you have windows search your computer, it will usually find them, and install them. Takes a couple minutes.
I find this is easier than trying to have windows look in a specific folder. Like I said, I have tons of driver files.
Also, google for Android USB drivers. Will give you the generic Android USB driver pack. Unzip them also, to a diff folder.
Click to expand...
Click to collapse
So which do you recommend I try first? Acer or Android ones? Also, you recommend a full scan of the C:/ even though I categorize them in folders?
erica_renee said:
When you say it does not recognize your tablet. Are you saying that when you plug the tablet into the computer thru usb You do not get a prompt to install a Driver? If this is the case Windows thinks it has the proper driver. You will have to find the device in device manager . OPEN it and update driver. You can try to have windows to search . but i disagree with MD on this. But both ways tend to have the same results .TELL it where your drives are such as mine are in c:/android/androidsdk/ xxx
You could also try to install Acer sync from the acer iconia d/laod site If you do this i would change the install path to a sub folder of your sdk install. could be useful in future.
Click to expand...
Click to collapse
Basically, I hear the quick beeps and the device is not being recognized by Windows. Under device manager it is the only device that has a question mark or exclamation point for icon.
I will try both methods and report back on which one works. Thank you very much!!
Sent from my SGH-T989 using xda premium
Quick update.
I tried both of your theories, and neither of them worked
I tried to find the ADB drivers, but couldn't get them to install through SDK Manager (file not found on an XML file).
So then, I took two of the drivers I had downloaded, and extracted the folders they were in, into a folder on C:\ called android drivers.
I tried searching my entire C:\ and nothing came up at all. This is where I tried Erica's method, and I narrowed it down to the C:\android drivers and it STILL didn't bring anything up.
Finally, I tried downloading and placing these (http://androidforums.com/incredible...ivers-adb-bootloader-disk-drive-htc-sync.html) drivers, and it still didn't find them.
Oh, and I also tried plugging my phone into the troublesome port and it connected fine, as per Erica's suggestion, so I think this is some kind of driver issue.. but WHAT!
Thanks for all of your help so far!
EDIT: Here is the icon I am getting when I plug my tablet into my computer: http://i.imgur.com/jUf54.jpg
Not sure you tried this or not.
Go to Acer.com then there download drivers page. look. for Acer sync. Download and install that. it just might install the Acer adb drivers
Beyond that I say go to Ms tech site and search for USB host/driver issues.
Sorry its not working but at this point I have no idea without being infront of the machine.
Good luck
erica_renee said:
Not sure you tried this or not.
Go to Acer.com then there download drivers page. look. for Acer sync. Download and install that. it just might install the Acer adb drivers
Beyond that I say go to Ms tech site and search for USB host/driver issues.
Sorry its not working but at this point I have no idea without being infront of the machine.
Good luck
Click to expand...
Click to collapse
Thanks. I'll try it. The only thing I didn't try in your suggestions was to uninstall USB hosts, seems a bit drastic to me. I'll try Acer Sync and lets hope it fixes it!
Sent from my SGH-T989 using xda premium
Nope, no dice on Acer Sync. Same three beeps, nothing is happening. I keep restarting the machine as well to make sure it's as clean a boot as possible.
Thanks anyways!
I've run out of ideas.. Anybody else have any theories or suggestions?
Sent from my SGH-T989 using xda premium
skadude66 said:
Nope, no dice on Acer Sync. Same three beeps, nothing is happening. I keep restarting the machine as well to make sure it's as clean a boot as possible.
Thanks anyways!
I've run out of ideas.. Anybody else have any theories or suggestions?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
USB Debugging turned on?
Moscow Desire said:
USB Debugging turned on?
Click to expand...
Click to collapse
Tried with it turned on and off.
Sent from my SGH-T989 using xda premium
skadude66 said:
Tried with it turned on and off.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Here are 2 zip files.
1 for Google USB drivers and the other for USB ADB for HTC drivers.
Unzip them to different folders on your C:\. Then let it search again. Hope it picks them up.
Moscow Desire said:
Here are 2 zip files.
1 for Google USB drivers and the other for USB ADB for HTC drivers.
Unzip them to different folders on your C:\. Then let it search again. Hope it picks them up.
Click to expand...
Click to collapse
Thank you. I will check and try when I get home. Man, I HOPE THIS WORKS!
Sent from my SGH-T989 using xda premium
skadude66 said:
Thank you. I will check and try when I get home. Man, I HOPE THIS WORKS!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yeah, that's the last of my guesses, and it was the last sets of drivers I installed on my Win7 before I got ADB working. I had issues connecting ADB, and may have just installed the HTC divers, just to connect with my Desire. I think after that, I installed the google drives, and could connect with my 501.
I could always get the PC to recognize the tab, just not through ADB.
With that AOKP rom though, I am not sure. I had it for a bit, but reflashed back to my 3.2.1 daily driver. Not sure if I could see it through PC, as I don't think I checked. Waste of time I think, as basically, it was 80% Thor Rom, and we all know it doesn't get 3g or gps on a 501.
Moscow Desire said:
Yeah, that's the last of my guesses, and it was the last sets of drivers I installed on my Win7 before I got ADB working. I had issues connecting ADB, and may have just installed the HTC divers, just to connect with my Desire. I think after that, I installed the google drives, and could connect with my 501.
I could always get the PC to recognize the tab, just not through ADB.
With that AOKP rom though, I am not sure. I had it for a bit, but reflashed back to my 3.2.1 daily driver. Not sure if I could see it through PC, as I don't think I checked. Waste of time I think, as basically, it was 80% Thor Rom, and we all know it doesn't get 3g or gps on a 501.
Click to expand...
Click to collapse
I can't get it to recognize through ADB either. I'd love to try another ICS ROM, but I have to go through Dropbox and it gave me a smaller file name, so it isn't as safe. Might try to download through my a500.
I do have a Nandroid of 3.2.1, bit I doubt that could fix my issues.
Sent from my SGH-T989 using xda premium
skadude66 said:
I can't get it to recognize through ADB either. I'd love to try another ICS ROM, but I have to go through Dropbox and it gave me a smaller file name, so it isn't as safe. Might try to download through my a500.
I do have a Nandroid of 3.2.1, bit I doubt that could fix my issues.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Found this;
http://forum.tegraowners.com/viewtopic.php?f=30&t=350
What is interesting is the part about Acer ADB USB drivers. No link, so will have to search.
EDIT: Link
http://www.slatedroid.com/topic/17456-usb-drivers/
Everytime I connect via usb, it tries to install drivers but fails. I am unable to transfer files like music, pics and was wondering if anyone had suggestions.
Have you tried downloading and installing LG's PCSuite?
Try to change different connection mode on the phone, like storage mode to copies files or PC Suite to sync files like iTunes.
sunnymiu said:
Try to change different connection mode on the phone, like storage mode to copies files or PC Suite to sync files like iTunes.
Click to expand...
Click to collapse
it might be the usb cord that is defective..
I've tried different cords and also different connect methods. I dont have the suit though, I'll download that and see how that goes. Its weird though because it was working prior to the kit kat update and tbh Im beginning to think its my computer that is having the issues and not my phone. But dont really know what to do about it.
You can also download the drivers from LG website on your phone models page.
Uninstall previous, install the new ones. Reboot computer.
Plug in phone and ignore the promotion phone to install. Choose appropriate mode for connecting and victory.
If not check in explorer on computer if phone is listed
That should do it
if you are talking about that little error in the bottom right of your computer screen that says something like usb failed to recognize with a yellow triangle, try rebooting that usually works for me if not
uninstall the lg driver
reboot then reinstall the lg driver and you should be good to go..
Hmm...idk but I think something wasn't right with my root. I checked on rootchecker and it was verified then I checked again it night and it wouldn't detect it. So I rerooted my phone and the connection seems to be working now. I hope this also takes care of all the other issues I've been having
Sent from my VS980 4G using XDA Free mobile app
Is your device manager blank?
Sent from my LG-LS980 using XDA Free mobile app