hi i have flashed cm902 rom it booted up but it dont like me cause makes eroros so i wanted ro reflash with old stock 2,3,3 and with recovery bootstrap i thinked what i wild came into recovery but it just hanged and now no recovery only white triangle with yelow! and only logo m, so maybe someone hav this problem earlier and can help me?cause now im searching half day of work for searching for solution.
thanks fo anny help
Dont worry. Do this. First use the wall charger and charge your phone for at least 30mins. So if your phone is off then it will charge till 70-80%. Check if it is charging by looking at the micro-usb port lighting up.
Now go to the White triangle with ! mark. Then press @ button. You will get options. Select erase data by pressing volume button and then clicking enter button on your keypad.
After the wipe has been done pull out battery. Then start RSD Lite on your computer. Put the battery to your phone. Now press both volume up and volume down together and then power button for 2secs. Leave power button. You will see it in bootloader.
Now load sbf file on RSD software and wait for it to recognize your phone. Then click start. Thats it. Your phone should be ok.
So, I've bought this phone about two weeks ago (used) and it was running on CM 10.x (not sure but I think 10.1) and JB 4.2.
Everything was running nice and then about week ago I started to get messages like *google play has stopped* and *google.service.....*...... has stopped* and those were coming at random moments and I could just press ok. It started to bother me but my PC was on repair so I couldn't install new rom or anything. And then few days ago when I was about to go to the bed I've seen that battery was pretty low, but I didn't care. So when I woke up in morning, and when I was about to leave house, just of curiosity I pressed power button about 3 times (fastly) and it started booting, but I had to go so I leaved it and I don't know did it pass CM loading screen or not. And while I was still away my brother took the phone, plugged it in the wall and right away tried to turn it on, it passed GoogleM logo but CM was loading for 10 minutes (that never happened before) so he took the battery out, put it back in and leaved it to charge. Them I came home and took the phone, there was battery charging animation on screen and it was 22%, I've turned it on, it passed GoogleM logo but stuck again at CM loading screen. About 10 minutes passed and I've decided to unplug it and wait for it to load or to eat the whole battery and at the same time i've put one other battery to charge (I have 3 batts' and one charger for em').
Battery drained. Then I tried to boot it with other charged battery, same thing happened with loading and battery indicator was red, I was confused. So I tried bootlader but it said battery was too low. I've put the whole phone on charging again, when it was on 100% I tried to boot it, on CM screen battery indicator went red right away. I waited for few minutes and then took the battery out, when I have putten it back in it started to charge from 0%! When it got to 55% I've menaged to acces bootloader, then I turned it off.
Then also something really weird happened, my battery charger (you just need to put battery in and plug it in the wall) usually lights in blue colour when I insert battery, when it's plugged in wall and charging it's some sort of pink and when it's full it's blue again, so now when I insert 1st battery (onyx) it has blue light only if I press it at some points, and when it's being plugged in wall and charges, colour is dimming (weird).
With 2nd (from motorola) it lights blue when I insert it, but very weak, and dimms while charging.
When I insert 3rd (from motorola) there is no light at all, but light dimms while charging. All of em' worked before that CM loading problem. And I can't acces recovery mode (I press power button + volume down), caution sign appears with android guy behind it.
I would appreciate any kind of help. And sorry for my english.
I think something happened. The batteries got broken or find a friend who got a defy/ defy + , he can give you a full charged battery and try to flash a SBF , and after that , flash cm7 ... cm10.1 ... cm10.2..
How to flash a SBF ? You need RSD LITE. And a good SBF , for you defy ( I mean for your BL , mine got BL6 , BL= BOOTLOADER)
Press Power button + VOL UP , the phone will enter in download mode , and connect it through the USB at the computer , open the RSD lite , select the SBF , and click the device , but before you press start , acces Motorola stock recovery ( POWER BUTTON + VOL DOWN) , an android will show up , you have to press like 10 seconds , the android will show up , but nothing else , press search button or VOL UP and VOL DOWN at the same time , and wipe data and cache. Put the phone back in download mode , and press start .
Danarkin22 said:
I think something happened. The batteries got broken or find a friend who got a defy/ defy + , he can give you a full charged battery and try to flash a SBF , and after that , flash cm7 ... cm10.1 ... cm10.2..
How to flash a SBF ? You need RSD LITE. And a good SBF , for you defy ( I mean for your BL , mine got BL6 , BL= BOOTLOADER)
Press Power button + VOL UP , the phone will enter in download mode , and connect it through the USB at the computer , open the RSD lite , select the SBF , and click the device , but before you press start , acces Motorola stock recovery ( POWER BUTTON + VOL DOWN) , an android will show up , you have to press like 10 seconds , the android will show up , but nothing else , press search button or VOL UP and VOL DOWN at the same time , and wipe data and cache. Put the phone back in download mode , and press start .
Click to expand...
Click to collapse
Thanks I will try that, but what SBF should i flash since my bootloader says 9.10 (in left upper corner) and I'm from Croatia
zmarkod said:
Thanks I will try that, but what SBF should i flash since my bootloader says 9.10 (in right upper corner) and I'm from Croatia
Click to expand...
Click to collapse
No , in Download mode mine says 9.10 too , try flashing some SBF , maybe they will work. http://forum.xda-developers.com/showthread.php?t=966537 There you go. There are a lot of SBFs. I got the U6 (BL6) China , but take care of the flashlight , mine is burnt ;( . Because I played with it when I was on the china SBF.
Danarkin22 said:
No , in Download mode mine says 9.10 too , try flashing some SBF , maybe they will work. http://forum.xda-developers.com/showthread.php?t=966537 There you go. There are a lot of SBFs. I got the U6 (BL6) China , but take care of the flashlight , mine is burnt ;( . Because I played with it when I was on the china SBF.
Click to expand...
Click to collapse
Thanks, so U6 kills flashlite? And how do I put phone from stock recovery to download mode?
Yeah , but only if you activate it , if not , it will not kill your flash , to put the phone from stock recovery to download mode , choose the first one , and after that Press the POWER BUTTON + VOL UP ( Download mode ).
yesterday i toke my defy with broken glass for repairing and now i cant charge my phone when i get it back.
I get a question mark battery after i plug the phone to the charger and i cant boot into the system by long pressing the power button (there is a big M and i can access boot menu and recovery)
what can i do? why it wont charge?
have you tryed using an external batt charger?
Does wipe data/factory reset in stock recovery help? (In stock recovery press Vol+ and Vol-)
One option is McGyver method: http://forum.xda-developers.com/showthread.php?t=892026
Will try later
Thanks for your replies, I'll try late.
However there are two problems,
The problems is that I don't have an external charger for the battery,
The second problem is I don't have my defy on my hand now , coz I return the phone to the guy who repaired my phone and I'm not sure when I can get it :crying: (oh jeez)
I'll tell u when I got my defy back
I can't reinstall my defy+: in RSD Lite i installed in boot mode the stock rom, but don't reboot, i can't power on, charging is good ( white LED is light up), but nothing else.
One short push in the Power button: Power on and black screen ( + connected to the computer, i hear the USB plugged sound), one short push in the Power button: Power off ( Usb Plugged out).
In first time, i'm do the RSD Lite flashing in Bootloader , after than, no bootloeader, just a black screen.
So, i think, i'm stucked in Bootloader mode.
( In RSD Lite: if i push shortly the power button: connected, and i push once again the power button shortly: i can't see in the list in RSD Lite)
I try so many SBF file, but i can't find the right one.
I need help please :'(
I found an SBF file: if i use this, the bootloader and boot animation is get back.
But no android OS.
Problem solved. Defy + back in life.
FIN - END - Konyec Filmá -
HAPPY END
VIDÁM A MESE VÉGE
Same problem here
Hi Johny, could you please share more info how did you solve this problem? I was about to flash JORDN_U3_97.21.51 but did not find any download links.
Hi people,
I have a Motorola Defy plus (MB526) lying around. Because it is such a nice phone, I'd like to use it as second/backup/emergency device, but my last attempts to install a not-completely-outdated OS failed miserabely.
Now, the phone is in the following state:
- Power button does nothing, vol down + power also nothing.
- When plugged in, white LED is on, but battery apparently does not charge.
- Vol up + power gets me into a bootloader screen, but I have a "battery low" error message.
- By destroying a USB cable I was able to manually connect 5V to the battery when inside the phone, so I now get: Battery OK, OK to program, transfer mode USB.
Also, when now booting, the Motorola sign appears for a few seconds and the phone gets stuck in the boot animation of an old CM version that I previously tried to install.
Does somebody know how to proceed from here to flash any functioning ROM? Or to flash TWRP or CWM?
Can I somehow access the phone in this state using adb? Could fastboot flash recovery work (at the moment, I only get <waiting for device>) after getvar all?
I would appreciate any help. Thanks a lot,
Jay
phaetjay said:
Hi people,
I have a Motorola Defy plus (MB526) lying around. Because it is such a nice phone, I'd like to use it as second/backup/emergency device, but my last attempts to install a not-completely-outdated OS failed miserabely.
Now, the phone is in the following state:
- Power button does nothing, vol down + power also nothing.
- When plugged in, white LED is on, but battery apparently does not charge.
- Vol up + power gets me into a bootloader screen, but I have a "battery low" error message.
- By destroying a USB cable I was able to manually connect 5V to the battery when inside the phone, so I now get: Battery OK, OK to program, transfer mode USB.
Also, when now booting, the Motorola sign appears for a few seconds and the phone gets stuck in the boot animation of an old CM version that I previously tried to install.
Does somebody know how to proceed from here to flash any functioning ROM? Or to flash TWRP or CWM?
Can I somehow access the phone in this state using adb? Could fastboot flash recovery work (at the moment, I only get <waiting for device>) after getvar all?
I would appreciate any help. Thanks a lot,
Jay
Click to expand...
Click to collapse
Flash the correct SBF using RSD Lite or sbf_flash to your Defy+ MB526 which would be using CG version 5, 6 or 7. I recommend flashing a lower CG SBF such as DHT-22 SBF. Then wipe data/factory reset in Motorola Stock Recovery by pressing Vol Down and Power Button simultaneously. If you get a black screen then flash a higher CG SBF. Read this Defy AIO guide here: https://forum.xda-developers.com/showthread.php?t=1216982