Related
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
+1
i have the same problem here!!
Guys pls help
The usb message your seeing means it is connected by usb. You should be able to continue. Not sure activesync recognises magldr.
Sent from my HTC HD2 using XDA App
Im sorry if im wrong but ofcourse your phone wont get regonized by active sync anymore because you took off windows mobile from your phone when you installed nand. Just be paitence when u connect your phone to your computer and it will deffently get regonized and you will be ready to flash new roms.
Sent from my HTC bravo using XDA App
dustin1939 said:
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
Click to expand...
Click to collapse
hatomee91 said:
+1
i have the same problem here!!
Guys pls help
Click to expand...
Click to collapse
When you see this usb...usb you are connected.
Now right click daf.exe or android inastaller.exe or whatever the name and choose "run as administrator" and the install should start
read the second link in my signature
It says it is connected but when I run as admin it says usb init failure. What do I do then?
Sent from my HTC HD2 using XDA App
I saw a few posts about this problem. The fix is to reflash HSPL and load Magldr again.
http://forum.xda-developers.com/showpost.php?p=10351794&postcount=976
This is what helped me... Courtesy OP http://forum.xda-developers.com/showthread.php?t=893948
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
Ok I'm trying to install NAND Android on my HD2 & have found a thread that I can follow but to get started I need to have SPL 1.42.0000, 1.62.0000, 1.66.0000, 2.07.0000, 2.08.0000 or 2.10.0000 installed & I had 3.03 having just debranded the phone using HSPL.
Now I know I have to use bootloader to downgrade which I have managed to do but now have "Not Allowed" come up on the screen, the phone just goes into tri colour & now shows SPL 1.42.0000.
I think I know the reason - this was a stock rom I downloaded from the HTC site & my phone is a TMobile UK so presumably I would need an SPL as above for the TMobile network to strat with? If so where can I get one from as HTC don't appear to have one on their site with the SPL numbers as above?
Many thanks
Junks
spls are not specific to any network.
run hspl4 choose 2.08.hspl, done.
samsamuel said:
spls are not specific to any network.
run hspl4 choose 2.08.hspl, done.
Click to expand...
Click to collapse
Thanks Sam - Didn't realise that, I still have to get the phone to start though as I can't now get a connection to the PC as its stuck in tri colour mode with no USB
Plug in the cable, when "serial" becomes "USB" at bottom of bootloader screen, you're good to go. Forget you ever heard of an "activesync connection",,, it doesn't mean the activesync program, it means " USB connection"( using the activesync drivers)
Thanks again Sam, sorted that now & got HSPL4 loaded.
Need to put up another post now as stuck on the MAGLDR screen & cant get the NAND DAF to load!! I shouldn't have started this!
Junks666 said:
Thanks again Sam, sorted that now & got HSPL4 loaded.
Need to put up another post now as stuck on the MAGLDR screen & cant get the NAND DAF to load!! I shouldn't have started this!
Click to expand...
Click to collapse
Use Clock Work Mode Recovery to flash your NAND Android ROM. Check my sig for a link to CWM. With CWM all you have to do is copy the .zip.file to your SD card and then use CWM to flash it. It is very easy this way. The thread on CWM will tell you how to flash it and all info need to know about it.
Thanks for that but I've only just managed to do the simpler method wrong & don't understand the CWM at all at the moment. Was just trying to get the easiest route for my first flash but after trying three NAND ROM's I get the same error after loading MAGLDR & running the DAF.exe
As MAGLDR is loading...........SS SD kernel open failed
Then after running the DAF.exe files
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Did you get it going Junks?
Don't panic, we can fix this
T-Macgnolia said:
With CWM all you have to do is copy the .zip.file to your SD card and then use CWM to flash it. It is very easy this way. The thread on CWM will tell you how to flash it and all info need to know about it.
Click to expand...
Click to collapse
Junks666 said:
Was just trying to get the easiest route for my first flash
Click to expand...
Click to collapse
Go read the thread on CWM!!! As I said you just copy the .zip file of the ROM to your SFD card wich is how you download the ROM meaning you have to only download it nothing else. To copy it to your SD card use USB MassStg option #4 of MAGLDR but you have to have your phone connected to your computer via USB cable. To flash CWM connect your HD2 via USB and select the USB Flasher option #5 of MAGLDR then run the DAF of CWM. This will flash CWM to yor HD2. when your phone reboots keep the power button pressed down to get MAGLDR back up then select AD Recovery option #8 of MAGLDR. This will bring up CWM, then select "install zip from sdcard" then select "choos zip from sdcard" then find the .zip file that you just copied to your SD card and select it and it will flash the ROM. Oh yeah you have to use the send button to select each thing. Now what else do you not understand?
Look at my signature for links to MAGLDR and CWM.
Not yet Mez
Well I thought that seemed easy to understand TMac but.................
I intalled the cleandroid zip file but I guess since it didn't work you meant extract to the SD card (CWM didnt find the cleandroid zip file)? Also is there anyway of booting normally at the moment as I think I should charge the battery again after all this trying without success before I try again?
Thanks for your patience, I'm really not used to this sort of thing at all & at 54 yrs old I think I'm doing quite well!! lol
Junks666 said:
Not yet Mez
Well I thought that seemed easy to understand TMac but.................
I intalled the cleandroid zip file but I guess since it didn't work you meant extract to the SD card (CWM didnt find the cleandroid zip file)? Also is there anyway of booting normally at the moment as I think I should charge the battery again after all this trying without success before I try again?
Thanks for your patience, I'm really not used to this sort of thing at all & at 54 yrs old I think I'm doing quite well!! lol
Click to expand...
Click to collapse
Clean droid is also my fav rom
Assuming that you are able to boot into MAGLDR screen and you have the Cleandroid rom in your PC.
Now, in MAGLDR screen, select menu no.5 (USB Flasher) and subsequently connect your phone ( Plug UsB to PC). On your PC, run the DAF.exe of Cleandroid rom.
If you succeed, it will reboot to android.
Before doing that, please make sure battery above 50 %, spl 2.08 HSPL and radio 2.15.xx were installed.
Good luck
silverwind said:
Clean droid is also my fav rom
Assuming that you are able to boot into MAGLDR screen and you have the Cleandroid rom in your PC.
Now, in MAGLDR screen, select menu no.5 (USB Flasher) and subsequently connect your phone ( Plug UsB to PC). On your PC, run the DAF.exe of Cleandroid rom.
If you succeed, it will reboot to android.
Before doing that, please make sure battery above 50 %, spl 2.08 HSPL and radio 2.15.xx were installed.
Good luck
Click to expand...
Click to collapse
Thanks but tried that as posted earlier & get the happen error, now I'm not sure of the battery charge so want to charge that before trying again with CWM but can't charge it from the MAGLDR screen, tried plugging into the mains & reset but what ever I do it boots into MAGLDR & no charge
Yes MAGLDR makes your phone do that. Have you been able to flash a ROM yet no? Are you making sure your going to the 'USB Flasher' in MAGLDR? Run the daf when you're there, if you're getting that error still, make sure you disable USB connections inside of ActiveSync or WMDC on Vista/7.
Sent from my HTC Vision using XDA App
Thanks I'll try that next then - any ideas on getting the battery charged up again now though?
Junks666 said:
Thanks I'll try that next then - any ideas on getting the battery charged up again now though?
Click to expand...
Click to collapse
I would suggest you to reflash winmo from boot loader screen using micro sd in order to be able to charge battery. After that, you can retry the android flashing
Thanks - sorry if I'm a bit thick here, so does that mean I've put the phone back to original then start the whole process over again from the beginning?
You're battery should be fine while the USB is in. It won't die on you while flashing through MAGLDR. Once the USB is in.your phone it will he fine. Silly old cautious men. haha
Sent from my HTC Vision using XDA App
lol Ok I'm going to try one more time then give up!!
I have tried both methods now
Tried installing 3 different NANDS without CWM using the DAF & get the happen error with all three:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Tried with & without WMDC running
Then tried as suggested using CWM but after getting through all stages the last bit I get CWM Recovery files not found!! I checked the SD card & the Cleandroid winrar file is there, its there zipped & now unzipped in a temp folder (which shows on the phone) & also in the root just in case..........nothing nada zippo.............files not found.
Any last ideas before I buy a Nokia?? lol
Its really frustrating, I managed to get all the way through on both routes but can't get the ROM installed either way.
Thanks
Are you able to go in to CWM by going to AD Recovery in MAGLDR? How are you trying to flash a ROM? Go in to the settings in WMDC and make sure the USB Connections is unchecked.
Sent from my HTC Vision using XDA App
Junks666 said:
Not yet Mez
Well I thought that seemed easy to understand TMac but.................
I intalled the cleandroid zip file but I guess since it didn't work you meant extract to the SD card (CWM didnt find the cleandroid zip file)? Also is there anyway of booting normally at the moment as I think I should charge the battery again after all this trying without success before I try again?
Thanks for your patience, I'm really not used to this sort of thing at all & at 54 yrs old I think I'm doing quite well!! lol
Click to expand...
Click to collapse
Sorry man did not mean to seem rude. I just wanted to make sure you tried the CWM method as it is the easiest way to me. also yes you are doing freaking awesome considering I know your age now. Not to say older folks are illiterate or stupid just some older people have a hard time grasping new new technologies. Don't worry none my friend, like member mezcal9 posted yesterday we will get you back going.
Also do you have this, striaght from the MAGLDR OP
You need radio which support 576 RAM.
Click to expand...
Click to collapse
Skellyyy said:
You're battery should be fine while the USB is in. It won't die on you while flashing through MAGLDR. Once the USB is in.your phone it will he fine. Silly old cautious men. haha
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Sorry Skellyyy but yoy are wrong about this statement as you have to have a ROM runing for your battery to charge. MAGLDR does not support battery charging yet.
*Fixed Power-Off-Cable-Plug-Stop. Phone now detects this situation and reboots. Battery controller inside LEO needs runtime control during charge, it implemented in OS.
Click to expand...
Click to collapse
Notice it says it is implemented by the OS. Check my sig for a link to the thread.
i just put on nand rom for the first time, and i want to re-do it with american android, but when i try running magldr 1.13, it says usb not connected and i cant get past this to flash american android, any answers for this plz, ty much, error :260:
can you give us pls some more input on what you are doing exactly? Where does it get stucked, when you boot it or do you select something from the menu and then the problem with no usb connected occurs?
well when i go into magldr and try to get it to go into usb flash, so i can flash american android, it opens and i check the boxes and click next, then it scans for the usb, but it wont bring up an error, and it tells me to make sure my usb is connected and it is connected already???? im a noob at this so i cant explain to much into what im doing wrong, im just going by the steps ive read, i have android on it and it works just great, but i want a dif rom, not the stock rom i found.
when you choose usb flasher do you see:usb flasher......usb
i think americandroid is using daf method.so right click on aca.exe and run as administror.
be sure you downloded mgldr version of it (not clk)
never mind, my mistake
when i try running magldr it says error and it wont run magldr, and usb is connected, but it says it isnt...?
plz can anyone tell me what im doing wrong??? im running magldr and my hd2 is connected, but when i check the boxes in magldr and click next it looks for my pda, then says error 260 and make sure cradle/cable is plugged into pc, and it is, and it wont go into magldr so i can click usb flash drive...???
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
mutil said:
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
Click to expand...
Click to collapse
ok last night i did my first nand on my nd2, i ran the hspl, then i ran the magldr 1.13, then i scrolled down to usb flasher, then i ran the rom that the youtube link gave me, http://www.youtube.com/watch?v=cvS4EvS0PAw then it all worked, i had android on my phone, but i dont want the rom in the youtube link, i want one from this forum american android, and i was wondering, when i go to run magldr on my nand android i flashed, it tells me error and that to check if my phone is connected, and im just trying to do what i did in the youtube video but with a dif rom, but it wont work from android, it did just fine on wm 6.5, and my phone is connected to the usb, but it tells me it isnt, but i can still transfer music and other things, but when i go to run magldr it tells me my phone isnt connected, so i cant get into magldr and scroll down to flash usb and use the rom i want to use from this site, better? plz help thanks much.
in order to go into mgldr menu power off the phone.then power on but hold down the power key until mgldr menu comes. its not necessary to reload mgldr for each rom.if you installed it to your phone now it is in it.
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
getting phone working...
_fly
have you used the the HD2 toolkit? You can find/download from here
http://forum.xda-developers.com/showthread.php?t=1090783
try wiping the phone with task29, then loading the MAGLDR or cLK / which ever nand/rom you want to use. Hopefully this works for you....
_fly said:
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
Click to expand...
Click to collapse
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
mutil said:
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
when i go into ad recovery it says no boot source???
Then you have to install cwm first.
I have had a similar problem with my phone and what worked for me was disconnecting the usb cable and plugging it back in. then it seen it as usb and i was able to flash the ROM. i know it seems rather simple but this small fix might work for you as it did for me.
if you can install cwm i would highly suggest to do that and also looking into the hd2 toolkit as someone else as already pointed out.
I've already look through the other threads of users with the same issue, but none seem to have exactly the answer I'm looking for.
I was running windows phone 7 on my htc hd2, which was easy enough to do.
but yesterday I decided I wanted to put android back onto it, so I downloaded
Energy_2.8.2012.SensationXL from here. Followed all the steps in the thread, but now everytime I turn on the phone I get the error "NAND yaffs2 boot mount failed" and then just clicks straight over to the boot menu
so, as stated in http://forum.xda-developers.com/showthread.php?t=971268 I tried to "task29" the phone through the HD2 Toolkit app, and start again.
But all I get when trying to: task 29, update to/ install magldr 1.13 or clockwork, it just gives me an error [264] connection.
I'm unable to get onto the tri-coloured usb flashing screen that I used when I put WP7 on it, i've tried putting it in 'usb flasher' mode from the menu to no avail..
is there somehow a way to put the new ROM I downloaded ^^^^ onto the phone by switching it over to mass storage mode,
and then selectiong option 3: boot AD NAND?
how about return to WM,then try task29 and MAG or CLK
uyong said:
how about return to WM,then try task29 and MAG or CLK
Click to expand...
Click to collapse
I've always done the task29 and wiped it via HD2 Toolkit, but it's still stuck on the magldr boot menu
does the USB flasher option be the same at the bootloader (three-coloured screen) for flashing the new android rom?
If I simply loaded the android rom onto the SD card via an adapter, would that work if I went through the MAGLDR boot menu?
EG: 9: services, 1: boot settings, 1: boot source, 1: android from sd
..yes?
I'm at my wits end here guys!
I'm well aware of how to get into the three coloured bootloader screen, but the HD2 just wont do it!
I've done it numerous times before with this very handset from WM 6.5, then android (can't remember what version) , then WP7, and now it's decided to stop doing it when I want to go back to android, and the task29 has wiped it all, so I can't even simply revert back to WM6.5..
if someone could give me some step-by-step instructions on either a nand or SD android rom and the steps I need to take to get it working with that, bearing in mind the 'stuck on magldr' issue I have.
I can't remember if I stated it in my previous post but ever since I did the task 29, anything I try to do ie: update magldr to v1.13, update clockwork, or anything like that, it just give me an error saying it isn't connected via usb.
and now (started a few min ago) it isn't being recognised by the computer when I plug it in, even if i try and use 'mass storage' from the menu, whereas yesterday it was
julz1111 said:
If I simply loaded the android rom onto the SD card via an adapter, would that work if I went through the MAGLDR boot menu?
EG: 9: services, 1: boot settings, 1: boot source, 1: android from sd
..yes?
I'm at my wits end here guys!
I'm well aware of how to get into the three coloured bootloader screen, but the HD2 just wont do it!
I've done it numerous times before with this very handset from WM 6.5, then android (can't remember what version) , then WP7, and now it's decided to stop doing it when I want to go back to android, and the task29 has wiped it all, so I can't even simply revert back to WM6.5..
if someone could give me some step-by-step instructions on either a nand or SD android rom and the steps I need to take to get it working with that, bearing in mind the 'stuck on magldr' issue I have.
I can't remember if I stated it in my previous post but ever since I did the task 29, anything I try to do ie: update magldr to v1.13, update clockwork, or anything like that, it just give me an error saying it isn't connected via usb.
and now (started a few min ago) it isn't being recognised by the computer when I plug it in, even if i try and use 'mass storage' from the menu, whereas yesterday it was
Click to expand...
Click to collapse
Try flashing it back to window 6.5.... nbh.img?
Sent from my LG-P999 using xda premium
Yes, I agree with the others.
When I try a new ROM and it fails for some reason or another, I always just go back to win6.5 (http://forum.xda-developers.com/showthread.php?t=623283) and start over.
A bit of a hassle, but have found this to be the most reliable way so far.
how can I flash it back to 6.5 if I cant get to the bootloader/ when it doesn't recognise the phone when it's plugged in
julz1111 said:
how can I flash it back to 6.5 if I cant get to the bootloader/ when it doesn't recognise the phone when it's plugged in
Click to expand...
Click to collapse
When flash back to 6.5... you don't need a computer. All you need is an SD card. Download the correct file that matches to your country... extract the file... pull out the nbh file and rename it leo... then place it on the root of your SD... then boot.
This is a short run down of how to get it back to stock. Search a little... cause I know there is a thread that tells you how to do it in detail... plus it have all the files that you'll need.
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
Sent from my LG-P999 using xda premium
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
spuati as administrator through ROMUpdateUtility
not by DAF
drobcristi said:
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
run "ROMUpdateUtility.exe" instead
Thx
palokm said:
spuati as administrator through ROMUpdateUtility
not by DAF
Click to expand...
Click to collapse
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
The ROM Update Utility doesen't work couse can not establish a connection to my phone
you must run as admin
procedure
hspl 2.08
task 29
radio rom 2.15
aMAGLDR v1.13
drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Try connecting your phone to the back of your PC in one of the USB ports. Do not use the front ones.
Then when you run the Update utility right click on it and RUN as Administrator.
Hope that works.
younut said:
Please respect the rules !!!
I hate this kind of Shi*
GO ON ANSWERS AND QUESTIONS ... IDIOT!
Click to expand...
Click to collapse
That's quite hypocritical, saying that you hate people breaking forum rules then swearing and calling another member an idiot. If you're going to flame him (as I indeed was about to as well, but in a much nicer way), at least help him too, and just warn him about the mistake and report the thread for maintenance.
@ OP, what exactly are you trying to do? From what I understand, you already have MAGLDR and you're trying to flash MAGLDR again? There isn't any point to that, from here onwards the steps are to flash CWM with the right partition, then your desired ROM. Follow this guide.
drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Copy Pasting the half of the first post doesn't help us finding out what the problem is, Respect the people who spend time helping you out without getting anything!
So, Here is what you did:
You HSPL'd your device,
Installed Magldr,
Booted the device and pressed "USB Flasher"
Connected device to the pc, and tried to install the software but got a readme error?
Well I have that sometimes, but I just can go further.. Very strange.
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Give a thanks if you found this helpful
adil1508 said:
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Click to expand...
Click to collapse
not accurate.
The word 'sync' makes people think you have to actually get a connection to activesync/wmdc the program,,,,,, you don't.
put the phone into bootloader (stripey screen) connect usb, when serial becomes usb, thats an activesync connection and you can flash. activesync teh program will not show a connection when you do this. the line ''get an activesync connection'' has been confusing people for years.