Hello I am trying to get active sync to work but when i go into the bootloader and plug in the usb windows installs the driver for the sync from htc i really need to install magldr 1.13 but i cannot get past the driver any ideas
thanks in advance
You do not need active sync. If you want to install MAGLDR just start bootloader and flash from there Hold Volume Down while starting the phone you will get the TriColored screen plug the phone into computer at the bottom of the phone it will say USB then click ROMUpdateUtility in the MAGLDR folder you downloaded. If the phone doesnt say USB try a different USB port
cannot sync in bootloader
wrecless said:
You do not need active sync. If you want to install MAGLDR just start bootloader and flash from there Hold Volume Down while starting the phone you will get the TriColored screen plug the phone into computer at the bottom of the phone it will say USB then click ROMUpdateUtility in the MAGLDR folder you downloaded. If the phone doesnt say USB try a different USB port
Click to expand...
Click to collapse
I am going to try on a different computer this afternoon. But I tried Everything you said Got to the bootloader just fine i even tried running the ROMupdateutility as admin. It gets to the progress bar just after you click update and then comes back with a usb error. I cannot seem to figure what the problem is other than my driver is not working properly. so i tried to uninstall the driver and it keeps reinstalling the htc usb sync driver form the windows update. like i said ill try it on a different computer and see if that works. thanks for your reply though.
Yes the problem is in your computer. It happened same with my laptop an computer. I formated and installed fresh copy of windows on the laptop. Now it is O.K.
thanks alot that was i thought about doing but...... I have Like a terrabyte to backup
First try reinstalling ActiveSync and try using a different usb port (preferably one at the back of the pc). Boot into bootloader and connect to pc, you need to see "usb" displayed on the phone screen.
You need active sync from ms. Not from htc. It's the soft provided by ms to sync wm devices. Normally it's downloaded when you connect your device. Check if windows try to install the driver. After you will also need the adb driver. For this one you need the android sdk.
Sent from my HD2 using XDA App
Related
Hello.
I have MDJ Cyanogenmod 7 v2.6 installed on my HD2.
Now i am trying to go back to windows or play with other roms and instal Magldr 1.13.
But when i try to install them. I have to use a Activesyns connection between my PDA and PC. But the only thing i can choose on my phone is USB Mass Storage (On/Off).
And then the installation fails because it can't find my phone.
How do i get a Activesync connection on Gingerbread.
Can't find it anywhere.
Paul1990 said:
Hello.
I have MDJ Cyanogenmod 7 v2.6 installed on my HD2.
Now i am trying to go back to windows or play with other roms and instal Magldr 1.13.
But when i try to install them. I have to use a Activesyns connection between my PDA and PC. But the only thing i can choose on my phone is USB Mass Storage (On/Off).
And then the installation fails because it can't find my phone.
How do i get a Activesync connection on Gingerbread.
Can't find it anywhere.
Click to expand...
Click to collapse
Considering it's early here, I'm having my coffee, I'm not going to flame you for the dumb question, you can't active sync your hd2 on android, active sync is for windows mobile only, just power down, and power back up holding the volume down button, it will go into bootloader mode, plug your usb cable and you'll see usb display at the bottom of the screen, now you should hear the phone connecting to your pc and you can run any windows mobile RUU and flash back to stock , or run task 29 and flash windows mobile.
Thanks!!! I really couldn't find it. Probaly because i was searching with the wrong thoughts.
It worked!
thank you sir...i was wondering the same mistake now i understoood
Guys
this morning i wanted to try a new rom and did task 29 and reinstall the radio and magldr 1.13 , and when i conected the phone via flasher mode it dosnt connect with the computer the strange thing is it connect via mas storage, i can flash win mobile which i did so my cable works, but I cant flash any android or win phone 7 ,,,i recently formatted my Pc besides that i could do it without any issue earlier what could be the problem
Damn it i cant flash anything via MGLDR it doesn't get connected only WIN Mobile 6.5
Hi, I would think that the problem is that you have formatted your pc, so you don't have ADB installed. Install Android SDK and you will get ADB support.
Thanx , i will try thanx a lot
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
nishanthabgw said:
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
Click to expand...
Click to collapse
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
malybru said:
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
Click to expand...
Click to collapse
thanx will try nw
Hi,
i am having lots of trouble with my HD2. I just got it so im kinda new to this new stuff. I previously came from the HTC Desire.
My problem is that i can't run any RUU. Even the original one. Or the magdrl one.
It is always stuck at 0%.
Steps i have taken: I established activesync unfortunately it does not sync properly because it asks me to log in in my phone and i cant seem to do it. though i still go to the bootloader and have USB at the bottom.
I have installed HSPL4 with 2.08.0000. It was succesful. I tried different USB ports on my computer.
Its only the RUU problem where i am stuck at 0% and after awhile it fails and gives me error 276.
Please help me...
Thanks
Vevek
I also had this problem seldomly.
Possible reasons are:
- battery charge level
- virus scanner on PC
- firewall on PC
- non removed SD
- other devices connected to USB (printer, scanner, ...), disconnect which you don't need.
- USB 3.0 ports on PC
- ...
- Have you tried to reboot your PC?
- Which OS are you running on PC?
- If Window 7 try to install Windows Mobile Device Center again
- Have you already tried LeoAdvacedRUU?
shockem said:
I have installed HSPL4 with 2.08.0000. It was succesful.
Thanks
Vevek
Click to expand...
Click to collapse
2. 08.0000 is stock, so won't allow flashing. Run hspl4 again and choose "2.08.hspl" .
Hello,
I have a HTC HD2 running on a Android NAND ROM.
I have to unlock the SIM. I was told I had to go back to Windows Mobile first.
Problem is, my USB connection does not work.
WHen the phone is on android, if I plug the cable, my phone recognizes it but nothing happens on my PC (windows 7)
When I am on the bootloader screen, it is only written "Serial" but never "USB".
Tried several cords/USB ports...
Phone isn't connecter in Windows Mobile manager either.
Any advice, please ?
Sometimes you can introduce unlock code from Android too...Try this with another SIM and see it it asks for SIM/network code!
But if still want WM, you should flash it from micro-sd.
vil-2 said:
Hello,
I have a HTC HD2 running on a Android NAND ROM.
I have to unlock the SIM. I was told I had to go back to Windows Mobile first.
Problem is, my USB connection does not work.
WHen the phone is on android, if I plug the cable, my phone recognizes it but nothing happens on my PC (windows 7)
When I am on the bootloader screen, it is only written "Serial" but never "USB".
Tried several cords/USB ports...
Phone isn't connecter in Windows Mobile manager either.
Any advice, please ?
Click to expand...
Click to collapse
Check to make sure you have the proper drivers installed on your computer first, if not you can always download hd2 drivers off xda. This is probably the easiest and safest thing to do first. otherwise, like above you can try it though android and see what happens. Best bet is to instal WM 6.5 with a broke usb is through sd card, but that is not without its risks. Check the forums for the file and "how to" guide, i remember reading it once. Also, not sure how you will back to Android without usb port to flash magldr or cwm? Good Luck with whatever you decide to do, maybe someone else has other ideas.
Hi!
I don't know if this is a right forum but I run into a problem that I can't solve. I had some Android NAND version that stoped to work after a SD card was formated (silly but true). It loaded almost fully but it didn't show any icons and nothing was functional. Even wasn't recognised on PC in bootloader mode. So I decided to go back to stock ROM via SD card. And then it went to 9% and error occured. I tryed to flash again but it goes just to "Loading..." screen and nothing happens.
The worst thing is that HD2 is still unrecognized by PC via USB so I can't do anything via USB. The USB port on HD2 is OK, it was working with HTC Sync on Android ROM, tryed 2 differnet SD cards (FAT32), Windows XP and WIndows 7, HTC Sync, MS mobile device center and Activesync and no luck. Any ide what to do, at least what driver should I use?
All the answers I found include a step with USB flashing and I can't do it...
ok. reinstall windows mobile device center (win 7, vista) or activesync (xp)
open it, connection settings, uncheck allow usb connections and try again. also make sure that you aren't using a usb hub. try other usd ports.
wait a bit. phone drivers should be installed and serial should turn to usb (if drivers installation fails or if this doesnt work, open device manager, and delete the qualcomm usb driver or windows ce (don't remember which one it is in bootloader mode), unplug and let it install it again)
after installation of usb driver succeeds, you should see usb at the bottom of the screen. after that point you can try reflashing official roms
Thank you for your help. I solved my problem and saved my HD2
I was using original USB cable that came with HD2. Then I switched it with USB cable that came with my Evo 3D and that cable is thicker than original HD2. At first attempt HD2 was recognized and after all a driver (Qualcom USB) was installed so I flashed all the way to WP 7.8.
O, what a joy, I tought that I ended with bricked HD2, and now I have WP 7.8 device )))