I have a [32A] My Radio is 2.22.23.02 Im trying to update it to 3.22 I Found a tutorial but really didnt understand the command prompt parts ..................................sorry ima noob
No no no no no, did I say no? You've got a hybrid 32A/32B device. Flash that radio and your phone will become a paperweight. You need to read the sticky on the first page about myTouch 1.2's.
Sent from my LG-P500 using Tapatalk
Ooooooooo I get now so my phone is really 32B? Hmmmmm the reason I was asking because I want to get Ginger yoshi rc4 it said it needed 3.22......how do I successfully install that rom?
Sent from my HTC Magic using XDA App
You probably wont be able to. You can try flashing it and then flashing a 32B kernel over it, but that may send you into a bootloop. Which is fine, just make sure you make a backup of your current ROM first so you can restore it if something does go wrong.
Sent from my LG-P500 using Tapatalk
When I flash Ginger Yoshi I do go into boot loop I always thought it was the radios fault tho..
Sent from my HTC Magic using XDA App
Its not necessarily that the radio is at fault, more that the ROM's kernel isn't made to support the 2.22.23.02 radio.
Related
im running my rooted mytouch 3g with currently cyanogen mod 5.8....which is android 2.1 update 1 i beleive....how do i run this or any other froyo roms....do i just flash it or do something else please help.....
orignialy i was using mytouch 3g running 1.6 then i did the one click rooting steps and works fine now im here...please help...thanks!!!
You should be able to download the ROM you want to use (make sure its compatible with your phone), copy the file (will be a .zip) to your SD card, go into recovery (home+power), select update from .zip, and then select the file from your SD card. Some of the older recoveries require that you rename the .zip file to update.zip before you can flash it.
Sent from my HTC Magic using XDA App
xghostyxjokerx said:
im running my rooted mytouch 3g with currently cyanogen mod 5.8....which is android 2.1 update 1 i beleive....how do i run this or any other froyo roms....do i just flash it or do something else please help.....
orignialy i was using mytouch 3g running 1.6 then i did the one click rooting steps and works fine now im here...please help...thanks!!!
Click to expand...
Click to collapse
Are you asking how do you run the rom??? Or are you asking how you update to a newer rom??? I'm really confused...
I'm confused as well. I suggest a nandroid backup before u do anything. Perhaps a backup phone
Sent from my Chromatic Magic using XDA App
Binary100100 said:
Are you asking how do you run the rom??? Or are you asking how you update to a newer rom??? I'm really confused...
Click to expand...
Click to collapse
what im asking is well when i did the one click root program it rooted my phone and then i installed the clockword rom manager with recovery now thats all i did to it no updated for spl or anything...do you guys think i should do something else before i update this to the cyanogen rom froyo rom?? or just wipe and backup and flash??
Suggest amonra new recovery first off. There is a new radio 2.22.23.02 if its compatible with your spl. Then nandroid backup always. Then flash new Rom
Sent from my Chromatic Magic using XDA App
Easy with flashing the radio, you could brick your phone that way. You shouldn't need to do anything but flash the ROM, unless you've got a board requiring the EBI1 kernel which should be available with the CM ROM. Go into fastboot using (power+back) and post that information here.
Sent from my HTC Magic using XDA App
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP 30000)
CPLD -10
Radio- 2.22.23.02
I've "successfully installed" cm 5.0.8 but wont go any further then the swirling blue X load screen.. used universal androot to root and also used ROM Manager.. was able to nandroid restore from clockwork recovery back to stock 1.6.. help please?!
Sent from my T-Mobile myTouch 3G using XDA App
So I was considering on flashing pershoot's new kernel for 32B phones that includes the radio to see if there was any difference; however this is a caveat with that and Pershoot notes that in order for it to work I must have the right combo which includes "new" SPL and radio 2708. My phone, mytouch 3g 1.2, comes with the perfected SPL and my question is, as the title says, do I need the perfected SPL to boot up my phone or can I use the "new" SPL?
You can't use any radio/SPL combo with your phone besides what you have or your phone will not work properly, and you'll risk bricking it.
Sent from my HTC Magic using Tapatalk
DonJuan692006 said:
You can't use any radio/SPL combo with your phone besides what you have or your phone will not work properly, and you'll risk bricking it.
Sent from my HTC Magic using Tapatalk
Click to expand...
Click to collapse
I have a 1.2 and ran the new radio and spl just fine.
jeffakajeff said:
I have a 1.2 and ran the new radio and spl just fine.
Click to expand...
Click to collapse
Ran or are currently running?
Sent from my HTC Magic using Tapatalk
DonJuan692006 said:
Ran or are currently running?
Sent from my HTC Magic using Tapatalk
Click to expand...
Click to collapse
Still running, Should have said that
Although, I do not notice a difference at all, so really not worth it. But can be done.
Hi all first post Cant seem to find the answer after searching around on other post.
I was running CM 6.1 Fine. They droped HTC Magic so I wanted to try Ginger yoshi 1.0 RC7.1
I installed rom then updated radio. The phone my be boot-looping I don't. I have re flashed it several times. One time it got stuck on HTC screen other time it got stuck on splash screen one other time it was black with back light still on.
32a
Hboot 1.33.0013
CPLD-13
Radio-2.22.23.01
Thanks so much for takeing the time to read my post I guess I will try 7.0 see if that works I think its the radio
Same thing with 6.x It looks like I need to upgrade my radio to 3.x I guess I will try in the morning. The Ginger yoshi splash screen is as far as I can get it freezes up after about 30 secs on that
From my under standing the 3.* radios were for rodgers (canada) so if you in us I don't think that will fix. You might just wipe and nandroid your previous and see if that works. I had I hard time installing yoshi the first time cause of I think sd card issues the stock sd card sucks being class 2. If you get cm 6.1 working from nandroid restore you might try to run yoshi rom from rom manager that's only way I could get it to install. And first boot with yoshi does take forever.
Sent from my HTC Dream using XDA Premium App
Yes, I believe you will need to change your radio to a 3.22 radio and you will also need an SPL 1.33.2009 or 1.33.2010 since you have the 32a board. Don't forget to flash the 32a kernel. It's also in Yoshi's Mediafire folder.
I think (could be wrong, confirmation anyone?) I remember reading somewhere that the 2.22 radios we're specific and that you might run into problems flashing other radios. (no, seriously. Wrong radios could very well brick your magic) Tread carefully, my friend.
Also, I ran into problems with both the 7.1 and the 7.1.1 RC. Wifi didn't work for both roms so I wen't back to RC 7.
Don't flash any radio yet! Do you have a headphone jack on your phone? If you do then flashing the 3.xx radio is a bad idea!
Sent from my shad0w on Sapphire using XDA Premium App
Well i restored to cm 6.1
Used rommanager to install 7.1.1 Wiped then rebooted into nana and used 32a kernel.zip I all so run boot-cm_2635.11_ds_32a-oc-uv-xtra-ram-fp-020711
If I dont run the 32a kernel.zip it will bootloop on htc my touch 3g screen.
I run 32a kernel.zip located in Yoshi's Mediafire folder and it locks up on ginger yoshi splash screen
Same way with 7.1 and 6.5 any suggestions I do have 3.5 jack but I dont have the fender
Since I re flashed I will include all stuff from fast boot.
Sapphire PTV 32a
Hboot 1.33.0013 (sapp31000)
Cpld-13
radio 2.22.23.02
I guess Hboot is SPL? I used this for SPL boot-cm_2635.11_ds_32a-oc-uv-xtra-ram-fp-020711.zip I dont know if that was right or not. THanks much.
I was reading 7.1.1 is a wifi fix but from the post above your stateing its still broken is that right?
I updated to 1.33.2010 then tryed to install rc7.1.1 stuck on mytouch 3g screen
Tryed to use nana backup to cm 6.1 black screen with back light on so Im at a loss I guess I download cm 6.1 rom and try that or downgrade spl
Sorry dumb question
Sent from my HTC Dream using XDA Premium App
If you can get back to the other spl and can boot I might have your fix
Sent from my HTC Dream using XDA Premium App
So Do I just do a diffrent spl then install new rom?
Wrong my bad
Sent from my HTC Dream using XDA Premium App
My fault I was able to restore cm 6.1 with that new spl it took out the splash screen so I have cm 6.1 with new spl
jbourn27 said:
http://www.mediafire.com/?77aeakoaji5sb8a
Do everything like the first time and try this kernal see if you can get it to work with it
Sent from my HTC Dream using XDA Premium App
Click to expand...
Click to collapse
reflashing rc7.1.1 with this kernal I will let you know soon thanks for all the help
I will use rommanager and wipe
Cancel last message
Sent from my HTC Dream using XDA Premium App
stuck on htc screen
I loaded 7.1.1 then rebooted into nana and installed new kernel still no luck
32a
hboot 1.33.210
CPLD 13
radio 2.22.23.02
THanks much
im going to let it run for a hour likely nothing will happen then just go back to cm 6.1 I guess any other roms I should try?
I lied about kernel give me email ill send right one
Sent from my HTC Dream using XDA Premium App
raven.warsong said:
stuck on htc screen
I loaded 7.1.1 then rebooted into nana and installed new kernel still no luck
32a
hboot 1.33.210
CPLD 13
radio 2.22.23.02
THanks much
im going to let it run for a hour likely nothing will happen then just go back to cm 6.1 I guess any other roms I should try?
Click to expand...
Click to collapse
If you have the mytouch 3g 1.2 (the one with the headphone jack) then you need a 32b kernel without the 2708 ramhack. And you should have the 1.33.0013 spl and a 2.xx radio. On the yoshi thread I think they have a link to a kernel for us.
And I would suggest using ezgingerbread or cos-ds instead. Ezginger is fast and light. Cos has cm stuff
Sent from my shad0w on Sapphire using XDA Premium App
I think there may be issues with the 7.1(shame as 7 is blinding), so I'm sticking with the excellent rc7 for the moment(severe case of if it ain't broke don't fix it!). I had the right radio etc and still got the half hour non boot, then fc after wizard set up, then blank screen.
As with the rest of ginger yoshi's, 2.22.27.08 or 2.22.28.05 radio and the 1.33.0013 or 1.33.0013d spl are mandatory for them to work.
Having the same problem on rc 7.1 && 7.1.1
Except I'm on a 32b SPL 1.33.0013d and I've tried both 27.08 and 28.25 S
Still stuck on Green Splash >______<"
so i had s off for a long time now on my mytouch 4g but tried to flash glacier tmous rom by football yesterday, now im s on but can still get into recovery and flash one of my many backups on rom manager. cyanogen 7.1.0 is the only one that will work now any other rom that i have backuped is not going any further than the boot screen. im really looking to go back to stock but im having trouble finding the stock rom and flashing it . please help, any info is appreciated. when i boot into recovery phone reads as follows:
glacier pvt ship s on
hboot 0.86.0000
microp 0429
radio 26.08.04.30.m3
emmc boot
Search the development section for
pd15img.zip flash via boot. Should put back to complete stock.
Sent from my HTC Glacier using Tapatalk
mustk1ll20 said:
Search the development section for
pd15img.zip flash via boot. Should put back to complete stock.
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
i have searched and found that pd15img. zip flash i need to be s off and i am s on, im really trying to go back to stock everything!
Check the ultimate s= on/off thread? Haven't read it awhile but if I remember right down at the bottom of the first post, theres instructions for S= off.
Your post is kind of confusing. You want to go back to complete stock, but then want s off? S off isn't completely stock. But anyway that ultimate s off thread should get you where you want to be.
Sent from my HTC Glacier using Tapatalk
I recently rooted my Mytouch 4G using the Unlock Bootloader from Htcdev.com, i also flashed clockworkmod, busybox and superuser, The problem I'm having is when ever i try to flash a ROM i downloaded the phone just gets stuck at where you first boot it up at The "T Mobile MyTouch 4G" screen and just stays like that, i've tried it with a few different ROMs and it just stays like that, if anyone can help that'll be great and if you need more information then just ask please. i can also revert to the stock ROM fine but its the other ROMs that don't work
Thanks
http://forum.xda-developers.com/showthread.php?t=1678442
Sent from my Sense 4.0 Glacier using XDA Premium.
You will need to revert down to 2.2.1 stock, then root. I did the same thing and found an issue with flashing roms. I do.t have the thread links with me right now but could help when I get home tonight.
Sent from my HTC Glacier using XDA
This is no "issue". It's the intended behavior of HTCDev-unlocked bootloader. Kernel is to be flashed separately.
The only way to avoid it is to relock the bootloader and S-OFF with the old-fashioned downgrading method.
Ok so I used the wrong term when I said "issue". All I was getting at was s-off is the easier and preferred method.
Sent from my HTC Glacier using XDA