Database Users

[Q] Bricked my Epic while trying to install Clockwork...

had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?

metalblaster said:
had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?
Click to expand...
Click to collapse
You can still get into download mode. There us a d18 tar floating around. Flash that the odin
Sent from my SPH-D700 using XDA App

If it powers on then you still have hope. Hold qwerty 1 and the power button to boot into download mode and use this thread to flash back to stock. http://forum.xda-developers.com/showthread.php?t=773032
Epic 4g/Rooted/Epic Experience 1.2.02/Phoenix 1.45/Androdena-Galassia Theme

No problem just do this
metalblaster said:
had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?
Click to expand...
Click to collapse
I have had your same problem my friend just hold 1 while pressing power on and get in download mode then just do odin again
This nice yellow arrow has happened to me bunches of times so don't worry!

When you get the dash yellow icon situation, the only way to recover is to flash back to factory with Odin3.
In case you haven't gotten it yet, here's the download link for the di18 stock tar:
http://www.multiupload.com/X9AB1U56JV
You can get back into download mode by doing the following:
* Close the Odin program
* Pull the USB cable and battery out of the phone
* While pressing both the 1 key and power button with one hand, replace the battery with the other. Download mode should immediately appear.
* Open Odin first, then reconnect the USB cable
* Load the di18 stock tar into PDA, reboot should be the only thing ckecked. Press start.
I wrote the all in one script, and would like to know what happened when you installed the clockwork mod. Tell me what OS you were using and what messages came up. The script should have detected if the install wasn't successful.
Sent from my SPH-D700 using Tapatalk

thanks for the help
Being the resilient person that I am, (as well as the impatient one). I found a stock Tar for DG26 and Flashed it to my phone using odin... it fixed it. Then i manually updated it... Had i waited for a response i would have known there was a .tar file with the DI18 update floating about... Thanks for the help though. This is a good forum with a good community.

metalblaster said:
Being the resilient person that I am, (as well as the impatient one). I found a stock Tar for DG26 and Flashed it to my phone using odin... it fixed it. Then i manually updated it... Had i waited for a response i would have known there was a .tar file with the DI18 update floating about... Thanks for the help though. This is a good forum with a good community.
Click to expand...
Click to collapse
At least quite a few people came to your aid... glad you've gotten it sorted. Feel free to post again in the all in one if you still want to install clockwork mod, I do my best to help as long as I'm online. You know what to do now in case something doesn't work out... It's happened to us all.

Interesting enough, I don't think I actually bricked the phone when I first installed Clockwork. Seeing as this is my first smartphone and my first foray into the Android universe, I am a bit of a noob when it comes to how things are done. Not realizing that clockwork Mod used a different button to engage items than the normal Samsung recovery platform, I had thought I had some how overridden the start up files to eclair with the All in one program.. After re-upgrading the phone back to DI18, I rooted then installed clock work again using the "AIO" program. (great program BTW). I encountered a similar error to what I had before, When I was in clockwork I was unable to leave by using the home button or even removing the battery, but I hit the back button and then figured out that the camera button acted like the home button would in the native Samsung recovery client. I think this was the case from the start. Just keep this as a story of warning if you ever are in my position, ask people before you think you've completely "bricked" or screwed something up, because there may be a simple solution. Anyways thanks for the help, I'm still learning all of this, though I've been using linux platforms for years (no ubuntu or mint, more Red hat and Debian.) so you'd think id be ok at it....

HELP. Disabling Voodo, phone is stuck in reboot for 1 hr +

Please help!!!, I have JT's Voodo (Ext 4 installed) on my samsung fascinate, and I tried deactivating it using the voodoo toggle app so that I could flash his super clean rom. Things appeared to go ok, but now i'm stuck on the reboot screen (have the droid peeing on apple) for an hour now. I know JT said wait it out, but I havent read about anybody having it in reboot for over an hour. I dont know what to do??????

You have a date with Adrynalyne's how to completely remove voodoo thread. Somewhere here in development.
good day. From the Fascinate sporting the XDA app.

chopper the dog said:
You have a date with Adrynalyne's how to completely remove voodoo thread. Somewhere here in development.
good day. From the Fascinate sporting the XDA app.
Click to expand...
Click to collapse
Link to adrynalyne's thread ----> http://forum.xda-developers.com/showthread.php?t=804784&highlight=Voodoo+uninstaller
Good luck

Thanks ice. Not near a computer.
good day. From the Fascinate sporting the XDA app.

got that, and it's already not working. I can't get it to boot into recovery.
Boot to cwm (battery pull, and hold up volume while putting it back in and connected to usb),
when I do that, it just comes back up to the droid peeing boot screen.

Is it that hard to post your question in the right spot?

Hold both vol up and down and then power and that will get you to stock recovery.
highlight apply sdcard:update.zip and hit home button. Now you should be in Clockwork.
In clockwork the back button is accept.
good day.

Since it's a problem with voodoo developed for the fascinate, the developers of voodoo might know the best answer. And since there is no help and support section, this is the next best section to put it.

Hold both vol up & vol down then hold power until you see "SAMSUNG" then release only the power button - keep holding vol up & vol down until you enter stock recovery.
Once in stock recovery use the volume rocker to select "Apply update.zip" you will need to use the "home" soft button to select it. This should get you into Clockworkmod recovery.

Don't mind him he could give a **** about lending a hand with a borked device. He could have sent a pm to the mod to have it moved. Hope your devoodooing works.
good day.

cant get to clockwork from stock recovery
Ok, so part of that worked. I got into stock recovery, but I couldnt get into clockwork. I think it was because I moved the update.zip file into a folder on the sd card that I had made to keep all my rooting related zip files organized.
Am I totally screwed now, or can i do something to fix this??

Pull card from phone and use a reader to move it back to the right place.
good day.

Thank you, guess I'll be without a phone until I can track down a reader, or an adapter. My computer only reads mini and above.

should just be able to use adb to push CWM update.zip to SD root, and run that via reg recovery... then run the auto unvoodoo'er or manual method
I did this with no problems and then unvoodoo'd myself after a mess up. ADb should still be able to push a file if you are in recovery mode

ok, i ll give that a try. Thanks

I had the exact same problem and when I say exact thats what I mean. I could get into stock recovery but not clock work. finally I tried the update zip from stock recovery and with the vodoo it would not read it from the card. So what I did was push CWM back onto my phone through Odin and once I did that the update zip was back on the SD card and I could get onto CWM from there by choosing update.zip from stock recovery. Once I did that I pulled the SD card and put it in my HTC eris and went to adrynalyne's site and put the undo vodoo.zip on the SD card, thats the simple download at the bottom of the page. I put the card back in my fascinate and booted into stock recovery chose the update.zip which put me in CWM recovery and from there chose the undo vodoo.zip. when I hit reboot it did not take long at all but it was back to normal, give it a try ,wosked for me.

By the way, that vodoo on off switch app comes in very handy. But every time you turn it on or off you have to hit reboot in order for it to take effect. If you just tuned it off and started flashing you got vodooed

I put my card in a friend's phone to move the update.zip back to SDcard root. He left, so I ended up using adb push to put the voodoo_uinstall on my sd card. After a reset, and nandroid backup, I'm up and running pre-voodoo. I'm sure I'll be back on a version once I figure out which ROM (prob JT clean ROM) I want to flash on my phone.
Thanks for all the help everyone!

hey, question were you using the voodoo 11/02 stable from rom manager?

dun bricked myself good this time..

borked up the fascinate whilst trying to update to the devs 2.2.
i know exactly what i did wrong. i was running voodoo5, and i clicked to disable lag fix, but i forgot to restart to let it *actually* disable before trying to load the new stuff. STUPID!
when that happened, it hung on samsung screen, then after battery pull all the phone will do is boot loop.. samsung screen, then goes to robot and screen says says "wiping cache, data, ect.." and then back to samsung screen to reboot and reboot.
i have literally 30 tabs open with articles from here and other forums, nothing seems to be working. here is what i have tried.
1. tried booting back to red cwm and playing with the lagfix (enable and disable again) to see if it would work, no go. i ended up losing red cwm - had to ODIN red back.. i cant get green to flash.
2. tried flashing DL09 both the full package and each individual part via ODIN
3. tried flashing the stocki500system.md5 (from the board) and kernel via ODIN, and nothing.. same boot loop. everything i have flashed via ODIN still gives me a boot loop..
4. tried to connect via ADB but it wont let me access the phone.. NOTE: i just downloaded ADB as a last resort and know nothing about it..
the only thing i can seem to do is get to red cwm. i have several backups in the restore section, but none of them seem to work - either i get a "no file found" even though i can see the file(s), or i get an error after it does load that says ".android_secure.img not found. skipping restore of /sdcard/.android_secure"
any ideas?

Okay follow these steps. Make sure you follow them step by step. Even though you have the lagfix installed this removed it for me.
http://forum.xda-developers.com/showthread.php?t=782204
Place the PIT file where it belongs. Then ODIN the system, kernel, and recovery in that order. Don't restart the process every time. Just ODIN them one after another.

thank you very much for taking a moment to answer. i did follow that thread, however
i managed to get the stocki500 recovery but the other files (recovery, PIT) are all 404 not found errors.
ive tried that stock md5 and it still boot loops. i actually have that tab open from when i tried that route..
any other ideas and thanks again

Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648

I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.

BSayre18 said:
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
Click to expand...
Click to collapse
downloading now.. thanks for the point to this file.. i hadnt found that one yet

no problem. it should work out good.

mailaliasgar said:
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
Click to expand...
Click to collapse
i soft bricked doing that with a corrupt file before.. however that time i was able to restore using my backup.
this time, every time i try a method, it kicks me back to boot loop. if the file that im downloading now doesnt work, i will have to try and figure out ADB as a last resort..
thanks much for the help!

BSayre18 said:
no problem. it should work out good.
Click to expand...
Click to collapse
problem
thank you for all your help

mrjake1970 said:
problem
thank you for all your help
Click to expand...
Click to collapse
So this worked for you? You just re-rooted as normal?
def

Thank you all for your help. i applied all the info i got here, and one of them worked it finally took the ODIN flash to stock and i recovered into FROYO from there.
seriously thank you all.. its great that the community is so supportive

I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?

Joe T said:
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Click to expand...
Click to collapse
i followed all the hints i got, and i think that the one i got about formatting helped me get out of the boot loop from hell.. it finally took my flash from ODIN, it wouldn't until i did the format(s)..
mind you i am NOT an expert, however from what i read and talked about offline, voodoo is still resident on your phone but disabled (check to see if you have the voodoo file still on your card).. if DL30 is running fine, you are ok..
from what i have read, yes.. the new cwm is required in order to get it to mesh properly with 2.2 leak.. i havent had any issues and i loaded that as well.. from one of the posts i read, if you are a serial flasher, then you need to make sure that not only you download the new cwm zip, but also should have deleted the entire clockworkmod folder from your card for best results..

I love this threadd.... I did the same damn thingg...
Sent from my SCH-I500 using XDA App

You guys are not alone. I'm just glad the peeps that know what's going on have the patience to put up with us.
Sent from my SCH-I500 using XDA App

adrynalyne's di01 odin package covers a multitude of sins.

upsidedownaaron said:
adrynalyne's di01 odin package covers a multitude of sins.
Click to expand...
Click to collapse
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App

godihatework said:
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
ABSOLUTELY!! I have those on my computer at all times, adrynalynes d101 brought me back a few times.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate

[How To] Root DL09 flash DL30 ROM - Fascinate

I have debated if I would just wait for the official DL30 update. But I bit the bullet. I decided on the 4th. I was having issues getting the custom recovery to stick, so I ended up just combining both of them. It almost seemed like there was file consistancy checks upon the fascinate booting up. I have gathered my information and files from XDA-Developers. That is a great site for anything about smartphones.
All credit goes to nitsuj17, OMJ, Syn Ack, and punk.kaos this is just what I needed to do to get my phone rooted and flashed with punk.kaos's DL30 ROM.
Original Posts: http://forum.xda-developers.com/showthread.php?t=913670 and http://forum.xda-developers.com/showthread.php?t=937499
****************************************************************************************
I AM NOT RESPONSIBLE FOR YOU DOING. THIS WILL VOID THE WARRANTY OF YOUR PHONE.
THIS IS JUST THE STEPS I DID TO GET MY PHONE TO FROYO.
THIS IS FOR VERIZON ONLY PLEASE DONT USE IF YOU ARE NOT ON VERZION
****************************************************************************************
Files Needed:
Samsung Drivers
Odin
CWMRecovery_DJ05_DL09.tar.md5
update.zip
su-2.3.6.1+busybox1.19.zip
DL30_leak.zip
new_cwm.zip
1.) Install the Samsung Drivers
2.) Place Odin3 v1.3.exe and CWMRecovery_DJ05_DL09.tar.md5 in the same folder on your pc
3.) Place the update.zip, su-2.3.6.1+busybox1.19.zip, DL30-leak.zip, and new_cwm.zip in the root of your sdcard (root means not in any folder just on the sdcard)
4.) Put your phone in download mode by taking out the battery. Then hold the volume down button while plugging it into the usb cable attached to your computer
5.) Open Odin
***************************************************************************************
THIS IS IMPORTANT > DO NOT TOUCH ANY SETTINGS IN ODIN, ONLY USE THE PDA BUTTON AND THE START BUTTON.
IF YOU TOUCH ANY OTHER BUTTONS IN ODIN YOU COULD BRICK YOUR PHONE.
***************************************************************************************
6.) So press the pda button then select CWMRecovery_DJ05_DL09.tar.md5
7.) Press start (Note this will reboot your phone when complete)
8.) Power the phone on while holding the entire volume button down. Let go of the power button when the Samsung logo shows but keep holding the whole volume button.
9.) This will boot you into the stock recovery. Use the volume rocker to move down to apply sdcard:update.zip then press the home key
10.) After it applies you will be in clockworkmod recovery
11.) Use the volume rocker to navigate to install zip from sdcard. This time though you will use the back key to select. (I know it is annoying that there are two different select keys but get used to it)
12.) Navigate down and select choose zip from sdcard
13.) Navigate to su-2.3.6.1+busybox1.19.zip press back to select it
14.) Navigate down and select Yes – Install su-2.3.6.1+busybox1.19.zip
15.) Once that is done press the search button to go back a menu
16.) Next, go back to the main menu and choose "Wipe Data/Factory Reset", do this twice for good measure. Then choose "Wipe Cache Partition", do it twice for good measure, it doesn't hurt anything.
17.) Once in Recovery, choose "Install zip from sdcard" > "Choose zip from sdcard" > Then locate your "DL30.zip" file that you downloaded earlier. Choose it and then hit YES. Once complete, takes less than a couple minutes usually.
18.) FINALLY, choose "Install zip from sdcard" > "Choose zip from sdcard" > Then locate your "new_cwm.zip" file you downloaded earlier. Choose it and hit YES. YOU ARE DONE!!!!
Reboot the phone and enjoy your rooted, bloated, official copy of Verizon Froyo.
For the record, this update ONLY works with DJ05 and DL09 radio. Meaning you must download and flash it to your phone if you do not have it or you won't get texts and probably won't be able to make calls.
I am working on my own hybrid ROM that is taken from punk.kaos’s and adrynalyne’s customer ROMs.
It will remove all the bing from the phone but will keep Samsung’s TouchWiz. I am also thinking about integrating the Hulu app.
Stay here and I will keep you updated.

EA28
Will this also work if I have EA28 installed? Unrooted, stock.

holycow90 said:
Will this also work if I have EA28 installed? Unrooted, stock.
Click to expand...
Click to collapse
Yes it will work.

ziggy484 said:
Yes it will work.
Click to expand...
Click to collapse
umm, no it doesn't.
I just tried it and halfway through applying update.zip, it stops with an exclamation point!

chronster said:
umm, no it doesn't.
I just tried it and halfway through applying update.zip, it stops with an exclamation point!
Click to expand...
Click to collapse
At no point during steps 7,7,8 can you let the phone boot into the os... everyone is getting screwed up with this (including me). the op should have pointed this out. something in dl09 doesn't let you boot into cw the old way. flash cw via odin, then stock recovery update zip, then boot into cw, then flash froyo, then flash new cw. Confusing I know, someone around here explained it better.

ziggy484 said:
At no point during steps 7,7,8 can you let the phone boot into the os... everyone is getting screwed up with this (including me). the op should have pointed this out. something in dl09 doesn't let you boot into cw the old way. flash cw via odin, then stock recovery update zip, then boot into cw, then flash froyo, then flash new cw. Confusing I know, someone around here explained it better.
Click to expand...
Click to collapse
Ok, yeah, what I did was flashed CW then let the phone boot up. I'll give your way a shot
edit:
It worked! You rock! I flashed CW with Odin, then immediately unplugged it, put the battery back in, held down the volume button and power button, applied updatezip, and got the CW menu!
Really I was just wanting to apply the root to the new update. This worked!
I really REALLY thank you, man!

chronster said:
Ok, yeah, what I did was flashed CW then let the phone boot up. I'll give your way a shot
edit:
It worked! You rock! I flashed CW with Odin, then immediately unplugged it, put the battery back in, held down the volume button and power button, applied updatezip, and got the CW menu!
Really I was just wanting to apply the root to the new update. This worked!
I really REALLY thank you, man!
Click to expand...
Click to collapse
Awesome!! glad you got... man this stuff can get crazy... I had a serious brick incident doing this exact thing, finally got it back and immediately unrooted to chill out for a while, but I cant hold out much longer... have fun!
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate

Glad I could document this aggravating crap. You don't know how many times I had rebooted after Odin before I said eff it and just do it in one long process without booting fully up.
Sent from my SCH-I500 using XDA App

All,
I have read these forums for months and now finally wanted to root and update to 2.2.
I haven't found the answer yet regarding what base setup I need to have on my Fascinate?
Can I do this with the following?
Firmware version:
2.1-update1
Baseband version:
S:i500.04 V.EA28
Kernel version:
2.6.29
Build number:
SCH-I500.EA28
I am sure you all might laugh however someone who hasn't payed real close attention would like to know the answer.

cdw5510 said:
All,
I have read these forums for months and now finally wanted to root and update to 2.2.
I haven't found the answer yet regarding what base setup I need to have on my Fascinate?
Can I do this with the following?
Firmware version:
2.1-update1
Baseband version:
S:i500.04 V.EA28
Kernel version:
2.6.29
Build number:
SCH-I500.EA28
I am sure you all might laugh however someone who hasn't payed real close attention would like to know the answer.
Click to expand...
Click to collapse
The answer is yes.

This worked for me finally, but I had to go completely back to stock first to make it work.
Good write up Thanks!

You should just flash DL09 back and backup and remove Active Care...keep EA28 out lol that'd what I've done...then again I don't use pattern lock so the emergency call bug isn't an issue.
Sent from my SCH-I500 using XDA App

It worked! Completely Amazing, For anyone who tries and sees it going REAL slow on Verizon Wireless screen...set it DOWN let it WORK lol!!!
Edit- If your already rooted, i personally suggest you backup all your favorite apps with Titanium Backup...simple easy quick re-install on all the favs

Can someone upload EA28 version(Factory restore) need to update but i don't want OTA,,thanksz

Man - I wish all these old instructions could be cleaned up / updated somehow.

brettdacosta said:
Man - I wish all these old instructions could be cleaned up / updated somehow.
Click to expand...
Click to collapse
Just use the search function.
Here is a write up for the eb01 stock:
http://forum.xda-developers.com/showthread.php?p=11386068#post11386068

I can't update to ANY rom...

I wanted to update to CM7, once it rebooted into recovery mode it gives me an error. I got the official Sprint update and the same thing happens. Once it verifies the file, something happened and it says there was an error and does not update. I did a factory reset on the phone, got the official sprint update and the same thing happened. The error is always "signature verification failed" on both roms.
What can I do?
Thanks.

When flashing a rom, are you selecting 'install from SD" then find where you saved the zip, etc?
It sounds like you're trying it thru the update.zip option (don't do that). Also, when you reboot into recovery, you should be seeing orange type clockwork 3.0.0.6 (not blue or green).
Ask if you have any other questions.
Sent from my SPH-D700 using Tapatalk

Are you using cwm 3?

Thanks for the replies guys.
I am using clockword mod 3, with their option on updates.
I don't know how to do the "update from sd", haven't seen that. I'm not sure if I am seeing the orange you mention...I just go to restart in recovery mod from CM3.

capt_peo said:
Thanks for the replies guys.
I am using clockword mod 3, with their option on updates.
I don't know how to do the "update from sd", haven't seen that. I'm not sure if I am seeing the orange you mention...I just go to restart in recovery mod from CM3.
Click to expand...
Click to collapse
If you don't see orange text you're not on CWM3, you are either on CWM 2.5 or stock recovery and neither of those would be used for what you want to do.

Ya, check out the development section on getting the latest clockwork, if you don't have it already. And just in case, first, try powering off your phone, then hold camera button, volume down and power (after device is completely shut off). If you don't see orange text, you should update to the latest clockwork.
Sent from my SPH-D700 using Tapatalk

I turned off the phone, turned it on with the vol down/camera button and it automatically booted on CM recovery 3.0.0.5. Doing a rom backup. Then I see the orange text with several options but I can't pick any of them...I'm hitting the "home" button but nothing.
The phonr wont respond...I can toggle between the options but thats it.

I turned off the phone, turned it on with the vol down/camera button and it automatically booted on CM recovery 3.0.0.5. Doing a rom backup. Then I see the orange text with several options but I don't know where the hell CWM downloaded the file!!! I cant find it, or the official 2.2 one...
And now the phone is stuck in the SAMSUNG screen...

Bricked...tried factory reset and nothing. Tried restore through CWM and nothing...

If you are able to get into CWM or download mode then your phone is not bricked. It sounds like you will have to use ODIN to restore your phone back to stock.

capt_peo said:
Bricked...tried factory reset and nothing. Tried restore through CWM and nothing...
Click to expand...
Click to collapse
ClockworkMod 3 automatically converts your phone's filesystem from RFS to EXT4. You need a ROM that supports EXT4 or else it won't boot.
You wanted CM7 so go ahead and flash that if it's on the sd card. If you don't have it on the card it's easy to fix. Just turn off your phone and plug your memory card into a computer and copy a ROM that supports CWM3.
Once you flash a ROM your phone should boot normally.

Bro, when u boot into clockwork (orange) are u opening the slider and using the arrows and enter key. ? You shouldn't be using the home key.
Don't be so quick to "I'm bricked" .. cuz that's rarely the case. And annoying when ppl are trying to help.
Sent from my SPH-D700 using Tapatalk

K, thx for being patient. I did Odin and its again working.
Now the phone updated to 2.2.1
For future reference, can this Odin method be used o update to a non official rom (like CM7)?
Thanks for all the help.

I wouldn't rely odin for that, and as far as I know, no. For frame of reference, I've probably flashed epic roms over 100 times, and have only odin'd 5-- Used mostly to return to stock/update a modem. So, odining probably wasn't necessary for you. Do what arashed says a few posts up.

I'm using SRF 1.1.0/Twilight Zone and its amazing. Battery lasts a lot longer too.
Thanks again.

capt_peo said:
I'm using SRF 1.1.0/Twilight Zone and its amazing. Battery lasts a lot longer too.
Thanks again.
Click to expand...
Click to collapse
Thanks for your support!