had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?
metalblaster said:
had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?
Click to expand...
Click to collapse
You can still get into download mode. There us a d18 tar floating around. Flash that the odin
Sent from my SPH-D700 using XDA App
If it powers on then you still have hope. Hold qwerty 1 and the power button to boot into download mode and use this thread to flash back to stock. http://forum.xda-developers.com/showthread.php?t=773032
Epic 4g/Rooted/Epic Experience 1.2.02/Phoenix 1.45/Androdena-Galassia Theme
No problem just do this
metalblaster said:
had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?
Click to expand...
Click to collapse
I have had your same problem my friend just hold 1 while pressing power on and get in download mode then just do odin again
This nice yellow arrow has happened to me bunches of times so don't worry!
When you get the dash yellow icon situation, the only way to recover is to flash back to factory with Odin3.
In case you haven't gotten it yet, here's the download link for the di18 stock tar:
http://www.multiupload.com/X9AB1U56JV
You can get back into download mode by doing the following:
* Close the Odin program
* Pull the USB cable and battery out of the phone
* While pressing both the 1 key and power button with one hand, replace the battery with the other. Download mode should immediately appear.
* Open Odin first, then reconnect the USB cable
* Load the di18 stock tar into PDA, reboot should be the only thing ckecked. Press start.
I wrote the all in one script, and would like to know what happened when you installed the clockwork mod. Tell me what OS you were using and what messages came up. The script should have detected if the install wasn't successful.
Sent from my SPH-D700 using Tapatalk
thanks for the help
Being the resilient person that I am, (as well as the impatient one). I found a stock Tar for DG26 and Flashed it to my phone using odin... it fixed it. Then i manually updated it... Had i waited for a response i would have known there was a .tar file with the DI18 update floating about... Thanks for the help though. This is a good forum with a good community.
metalblaster said:
Being the resilient person that I am, (as well as the impatient one). I found a stock Tar for DG26 and Flashed it to my phone using odin... it fixed it. Then i manually updated it... Had i waited for a response i would have known there was a .tar file with the DI18 update floating about... Thanks for the help though. This is a good forum with a good community.
Click to expand...
Click to collapse
At least quite a few people came to your aid... glad you've gotten it sorted. Feel free to post again in the all in one if you still want to install clockwork mod, I do my best to help as long as I'm online. You know what to do now in case something doesn't work out... It's happened to us all.
Interesting enough, I don't think I actually bricked the phone when I first installed Clockwork. Seeing as this is my first smartphone and my first foray into the Android universe, I am a bit of a noob when it comes to how things are done. Not realizing that clockwork Mod used a different button to engage items than the normal Samsung recovery platform, I had thought I had some how overridden the start up files to eclair with the All in one program.. After re-upgrading the phone back to DI18, I rooted then installed clock work again using the "AIO" program. (great program BTW). I encountered a similar error to what I had before, When I was in clockwork I was unable to leave by using the home button or even removing the battery, but I hit the back button and then figured out that the camera button acted like the home button would in the native Samsung recovery client. I think this was the case from the start. Just keep this as a story of warning if you ever are in my position, ask people before you think you've completely "bricked" or screwed something up, because there may be a simple solution. Anyways thanks for the help, I'm still learning all of this, though I've been using linux platforms for years (no ubuntu or mint, more Red hat and Debian.) so you'd think id be ok at it....
Related
I have a huge problem.
I rooted my wife's (yea...my wife's...) Fascinate last night. The root method I used worked like a charm. I installed ROM Manager. Again...no problem. Flashed ClockWork Mod no problem as well. I selected "reboot to recovery" to do a nandroid as I've done on numerous other phones. In fact, ALL of this I've done on numerous times on half a dozen different phones.
When it rebooted, instead of it being in Nandroid, it was in the regular stock recovery. My stomach sank...lol
It would just reboot...that's it. Is there a loop with the fascinate? How do I get out of it if so?
At one point, the phone wouldn't do ANYTHING...all that would happen when I plugged it in was a little computer and cell phone would pop up on the screen. No recovery, no nothing. So, after lots of digging and reading, I found the files here that I thought I'd need to reflash the system using odin. I got the /system file, the kernal and the recovery. I flashed the kernal...worked perfectly. Flashed the recovery...again, perfect (and recovery is back but still in a reboot loop...) When I try the .tar.md5 system file, it says md5 is invalid so I changed it to a straight .tar file and it worked all the way up to the very end, then it stops. That's it.
I just need the phone to work again for my wife. I don't care if I even flash a new custom rom (which I can't fine one of that works!) or if it's just simply restoring the stock system files.
ANY AND ALL HELP GREATLY appreciated, guys. Thanks!!
To get to cwm, you have to select "apply update.zip" from stock recovery. This is how fascinate and a few other galaxy s cwm works. Also don't ever delete the update.zip file from sd card.
But to start out....
Step 1: Start with Odin:
http://forum.xda-developers.com/showthread.php?t=782204
A. Flash system and pit together
B. Flash kernel
C. Flash recovery
*Important note: in Odin, always use PDA!!!! Using phone will cause huge issues.
Step 2: Flash cwm:
http://dl.dropbox.com/u/458252/CWMrecovery.tar
*note: this is an Odin file, again flash using PDA
Your phone will end up stock, rooted and with cwm.
That's very interesting. Here's why:
A) It tried to flash the update and the update failed.
B) My Vibrant didn't require this step.
So...as I was typing that, I had the tar.md5 downloading again. Apparently 4th time was a charm because it worked and I'm back up and running.
Thank you all SO MUCH for the STUPID fast replies. Very very cool!!!
Rooting aside if you want to just fix it, I can help you with that. Nothing more though. Interested?
Sent from my SCH-I500 using XDA App
rmp5s said:
That's very interesting. Here's why:
A) It tried to flash the update and the update failed.
B) My Vibrant didn't require this step.
So...as I was typing that, I had the tar.md5 downloading again. Apparently 4th time was a charm because it worked and I'm back up and running.
Thank you all SO MUCH for the STUPID fast replies. Very very cool!!!
Click to expand...
Click to collapse
What do you mean for the "stupid fast replies"?
tats_06 said:
What do you mean for the "stupid fast replies"?
Click to expand...
Click to collapse
I think he means that your replies were just as fast as geeknik's kernel. The only other interpretation is that although your replies were quite quick, unfortunately they were also stupid. But thats obviously not true, so it must be the former. ;-P
Sent from my SCH-I500 using XDA App
I think some of us are showing our ages, "stupid" is the new "awesome."
Sent from my SCH-I500 using XDA App
Hey dont worry i had same problem
http://www.mobilephonenews.info/and...fascinate-restore-is-it-really-that-easy.html go here and follow instructions!!!
then update phone manually to get latest update!! might take a few times or many times because it failed to get update many times but eventually youll get it!!
goodluck
Sherwood, in his case he needs all Odin files, not just system.
Fallingup was first to put this up, credit to his post!
Download:
Odin: http://dl.dropbox.com/u/458252/Odin%...in3 v1.3.exe
Odin Restore file for /system: http://dl.dropbox.com/u/458252/Odin%...System.tar.md5
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin%...covery.tar.md5
PIT file for use in Odin Restores: http://dl.dropbox.com/u/458252/Odin%...00-VZW-pit.pit
Yea...I mean it's almost stupid how fast I got good, meaningful, educated replies.
In other words, you guys kick ass. Thanks again!!
similiar issue, please help me out.
spent 90% of the last few days of my life trying to "unbrick" my phone. i kno some of you will argue that its not really bricked but hell, a screen lighting up does not mean its more useful than a brick. anyway my problem is as follows:
the one and only thing my phone will boot to is download mode. absolutely no recovery. i have flashed via odin the stock modem system and recovery files countless times, sometimes successfully sometimes with error. even when doing so succesfullly the phone gains absolutely no functions. still download mode or black screen. only real thing i can mention that may have led to this issue is that i flashed stock kernel over voodoo lag fix without doing anything to it first. Please help.
Thanx
aabfalter said:
spent 90% of the last few days of my life trying to "unbrick" my phone. i kno some of you will argue that its not really bricked but hell, a screen lighting up does not mean its more useful than a brick. anyway my problem is as follows:
the one and only thing my phone will boot to is download mode. absolutely no recovery. i have flashed via odin the stock modem system and recovery files countless times, sometimes successfully sometimes with error. even when doing so succesfullly the phone gains absolutely no functions. still download mode or black screen. only real thing i can mention that may have led to this issue is that i flashed stock kernel over voodoo lag fix without doing anything to it first. Please help.
Thanx
Click to expand...
Click to collapse
sam problem here, i can get to cwm recoery and thats it. someone please help
justin94 said:
sam problem here, i can get to cwm recoery and thats it. someone please help
Click to expand...
Click to collapse
I had the same problem when I flashed the non-voodoo over voodoo and spent hours trying to fix the boot loop. I followed the instruction here http://forum.xda-developers.com/showthread.php?t=782204 but still running into the boot loop (recovery mode) then I flashed with the file from here via ODIN http://adrynalyne.us/files/kernels/DI01package3.tar.md5 and it restored my phone back to factory. From there you would have to do the root procedure again. Hope this helps.
anyone know where to get the update zip besides the dropbox link thsat has been dead forever??? every site i hunt on post that link. is there anywhere else to get it. both my pc get c++ runtime floating point errors when i open odin so i cannot flash with that. so i want to use the update zip but cannot find it
The update.zip to get to clockwork??
http://sharesend.com/g2jbl
First time I've ever hosted a file so let me know it if works lol.
Sent from my SCH-I500 using XDA App
This could be one of the rosiest phone ever to unbrick, unless you are a noon of coarse.
Sent from my DROIDX using XDA App
tswtech2 said:
anyone know where to get the update zip besides the dropbox link thsat has been dead forever??? every site i hunt on post that link. is there anywhere else to get it. both my pc get c++ runtime floating point errors when i open odin so i cannot flash with that. so i want to use the update zip but cannot find it
Click to expand...
Click to collapse
There is no update.zip method to unbrick. You will need to re-download a working copy of Odin or figure out how to make Odin work to do a factory restore with it.
Download the di01 complete package and use pda in odin to restore it.
http://forum.xda-developers.com/showthread.php?t=867648
borked up the fascinate whilst trying to update to the devs 2.2.
i know exactly what i did wrong. i was running voodoo5, and i clicked to disable lag fix, but i forgot to restart to let it *actually* disable before trying to load the new stuff. STUPID!
when that happened, it hung on samsung screen, then after battery pull all the phone will do is boot loop.. samsung screen, then goes to robot and screen says says "wiping cache, data, ect.." and then back to samsung screen to reboot and reboot.
i have literally 30 tabs open with articles from here and other forums, nothing seems to be working. here is what i have tried.
1. tried booting back to red cwm and playing with the lagfix (enable and disable again) to see if it would work, no go. i ended up losing red cwm - had to ODIN red back.. i cant get green to flash.
2. tried flashing DL09 both the full package and each individual part via ODIN
3. tried flashing the stocki500system.md5 (from the board) and kernel via ODIN, and nothing.. same boot loop. everything i have flashed via ODIN still gives me a boot loop..
4. tried to connect via ADB but it wont let me access the phone.. NOTE: i just downloaded ADB as a last resort and know nothing about it..
the only thing i can seem to do is get to red cwm. i have several backups in the restore section, but none of them seem to work - either i get a "no file found" even though i can see the file(s), or i get an error after it does load that says ".android_secure.img not found. skipping restore of /sdcard/.android_secure"
any ideas?
Okay follow these steps. Make sure you follow them step by step. Even though you have the lagfix installed this removed it for me.
http://forum.xda-developers.com/showthread.php?t=782204
Place the PIT file where it belongs. Then ODIN the system, kernel, and recovery in that order. Don't restart the process every time. Just ODIN them one after another.
thank you very much for taking a moment to answer. i did follow that thread, however
i managed to get the stocki500 recovery but the other files (recovery, PIT) are all 404 not found errors.
ive tried that stock md5 and it still boot loops. i actually have that tab open from when i tried that route..
any other ideas and thanks again
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
BSayre18 said:
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
Click to expand...
Click to collapse
downloading now.. thanks for the point to this file.. i hadnt found that one yet
no problem. it should work out good.
mailaliasgar said:
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
Click to expand...
Click to collapse
i soft bricked doing that with a corrupt file before.. however that time i was able to restore using my backup.
this time, every time i try a method, it kicks me back to boot loop. if the file that im downloading now doesnt work, i will have to try and figure out ADB as a last resort..
thanks much for the help!
BSayre18 said:
no problem. it should work out good.
Click to expand...
Click to collapse
problem
thank you for all your help
mrjake1970 said:
problem
thank you for all your help
Click to expand...
Click to collapse
So this worked for you? You just re-rooted as normal?
def
Thank you all for your help. i applied all the info i got here, and one of them worked it finally took the ODIN flash to stock and i recovered into FROYO from there.
seriously thank you all.. its great that the community is so supportive
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Joe T said:
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Click to expand...
Click to collapse
i followed all the hints i got, and i think that the one i got about formatting helped me get out of the boot loop from hell.. it finally took my flash from ODIN, it wouldn't until i did the format(s)..
mind you i am NOT an expert, however from what i read and talked about offline, voodoo is still resident on your phone but disabled (check to see if you have the voodoo file still on your card).. if DL30 is running fine, you are ok..
from what i have read, yes.. the new cwm is required in order to get it to mesh properly with 2.2 leak.. i havent had any issues and i loaded that as well.. from one of the posts i read, if you are a serial flasher, then you need to make sure that not only you download the new cwm zip, but also should have deleted the entire clockworkmod folder from your card for best results..
I love this threadd.... I did the same damn thingg...
Sent from my SCH-I500 using XDA App
You guys are not alone. I'm just glad the peeps that know what's going on have the patience to put up with us.
Sent from my SCH-I500 using XDA App
adrynalyne's di01 odin package covers a multitude of sins.
upsidedownaaron said:
adrynalyne's di01 odin package covers a multitude of sins.
Click to expand...
Click to collapse
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
godihatework said:
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
ABSOLUTELY!! I have those on my computer at all times, adrynalynes d101 brought me back a few times.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
I Rooted my phone.
Installed ClockworkMod rom manager
Tried (numerous) times to do a backup, but it always says "can't mount" or "can't open" and fails.
I've lost my bluetooth and vibrate in the process.
I am (and was already on) EA28 when starting all this.
Can anyone help a confused newbie???
I'm not any idiot, I'm a software developer and ASP.Net web developer. But all this Linux style command line stuff is beyond greek to me...
I'd like to get to the point where I had a known-good backup and could try using the DL30 leak.
I have Odin working on my laptop but have uninstalled "superuser" in an effort to get vibrate and bluetooth working again. As I said, it's a mess.
rvgraham said:
I Rooted my phone.
Installed ClockworkMod rom manager
Tried (numerous) times to do a backup, but it always says "can't mount" or "can't open" and fails.
I've lost my bluetooth and vibrate in the process.
I am (and was already on) EA28 when starting all this.
Can anyone help a confused newbie???
I'm not any idiot, I'm a software developer and ASP.Net web developer. But all this Linux style command line stuff is beyond greek to me...
I'd like to get to the point where I had a known-good backup and could try using the DL30 leak.
I have Odin working on my laptop but have uninstalled "superuser" in an effort to get vibrate and bluetooth working again. As I said, it's a mess.
Click to expand...
Click to collapse
I would follow the "beginners guide" to use the one click root method to get root back. Then flash the stock DL09 that's in the forums using odin to get to a point where you can push DL30 out.
Open ODIN, go get a DL09.md5.tar from the development section,
Take your battery out
Plug in the USB ** While holding Volume Down** (thanks for the save Superchunk)
Once in Download mode add the file to the PDA on Odin
Press start
It will erase EVERYTHING HOWEVER bring you back up and running
Alwasy a good idea to keep that file handy incase this happens again, just re-flash
***Note once you flash DL09 to fix everything, your again NOT Rooted, your back to Stock!!!!
(Just on what i use, i've always rooted my phone using http://forum.androidcentral.com/verizon-fascinate-rooting-roms-hacks/33899-how-root.html)
Linden13 said:
Open ODIN, go get a DL09.md5.tar from the development section,
Take your battery out
Plug in the USB while holding volume down
Once in Download mode add the file to the PDA on Odin
Press start
It will erase EVERYTHING HOWEVER bring you back up and running
Alwasy a good idea to keep that file handy incase this happens again, just re-flash
***Note once you flash DL09 to fix everything, your again NOT Rooted, your back to Stock!!!!
(Just on what i use, i've always rooted my phone using http://forum.androidcentral.com/verizon-fascinate-rooting-roms-hacks/33899-how-root.html)
Click to expand...
Click to collapse
edited with what I believe was missing...
superchunkwii said:
edited with what I believe was missing...
Click to expand...
Click to collapse
GOOD SAVE!!!!!
Thanks!
I'll try that when I get home. Never had DL09, went from DI01 directly to EA28, which seems to be a bit of an orphan.
Following your advice(s), what should I be doing to protect my ability to get back to a state where I can use Verizon's updates when and if I want to?
Bob Graham (Newbie Extraordinaire)
Got it working now....
This thread got me on the right track:
http://forum.xda-developers.com/showthread.php?t=944365
Now I have some issues, if that's the right word. Successfully onto DL30, but one of the last instructions on that files was for installing new_cwm.zip.
I don't see Rom Manager in my apps list, though Superuser is there.
Can I install CWM from the market now, so it will show in my apps? Or will that just corrupt the right one that is there(???) but not visible?
Bob
Cwm its a recovery which is flashed through samsung stock recovery. If you download the proper cwm file (which can be found in the dev section) you can power your phone off, then hold down both the volume up and down buttons, then while holding those buttons press and hold the power button til the samsung logo comes up. Blue text soul come up, which would be the stock recovery. You can then flash the cwm file (which you should have placed on your sd card) via the install .zip option in recovery.
Rom manager of available through the market.
Sent from my SCH-I500 using Tapatalk
I was wondering how it was possible to brick your phone (which somehow happened to me..) just by trying to get into CWM Recovery by doing the 3 button press.. As it is possible because it happened to me earlier today I was just wondering if it was a step that I did wrong.. Also I had nothing installed except flashing the Froyo EB01 modem which flashed successfully and than reflashed cwm recovery all which worked though I forgot I had to reboot fast or else samsung would replace cwm. So when I flashed a second time and than tried rebooting into cwm that's when it got stuck and bricked..
I got it solved earlier thanks to Adranalyne.
If anybody needs his thread for the all in one odin:
http://forum.xda-developers.com/showthread.php?p=9711053
Ensure it's not simply blank screen...hit search soft key when it ' should' go into cwm
Sent from my SCH-I500 using XDA App
Shadowchasr said:
Ensure it's not simply blank screen...hit search soft key when it ' should' go into cwm
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Naw, it was stuck on the samsung logo screen for an hour-got bricked. But i fixed it .
Can someone explain how exactly you fix it? I am having that problem as we speak...
sengokubattosai said:
Can someone explain how exactly you fix it? I am having that problem as we speak...
Click to expand...
Click to collapse
Odin it back to stock. Either Dl01 or Eb01. Both files include everything for you to recover your phone ans be able to boot back up past the samsung logo.
Taking it back to EB01 every time can be a bit extreme. There are CWM tar files that you can use to just flash CWM with Odin. I've used them when my phone would not boot into recovery. Remember the best way to get to "Download" mode is to pull the battery and while holding the down vol button plug it into your PC. I know thats common knowledge but it's always good to put it out there. Other techniques can prevent Odin from establishing a connection.
I've even seen complete Super Clean tars up to 2.6. I don't remember where but when 2.7.1 bricked my phone I just used Odin to flash a 2.6 tar and my phone was back to normal. Now I use that ROM image instead of EB01 when an update fails.
I would stress that any ROM compiled by someone else is not going to be endorsed by the Dev that created the update. I just took a chance because I was already down and it worked great.
Hello all, I'm basically freaking out as I just got my Samsung Galaxy Continuum within the last 24hours and already managed to screw it up. I used superoneclick to root the phone with no issues. I then got Titatnium Backup and enabled the chuck norris thing to freeze bloatware. I rebooted the phone and now it says Samsung lights up the intro screen and then after that I can't see ANYTHING. Please if anyone can help I'm moving to Seattle in 2days and this will be my only source of info/communication till my things arrive 10days after me. I NEED this to work : /
Any help would be greatly appreciated.
Aaaahahaha you're so screwed. See, God is punishing you for voiding your warrenty.
I'm kidding. Try to relax. I've recovered my phone from worse than that. I'll look into it today when I get to work and see what I can come up with.
Sent from my Samsung Droid Charge 4G-LTE
Aesik said:
Hello all, I'm basically freaking out as I just got my Samsung Galaxy Continuum within the last 24hours and already managed to screw it up. I used superoneclick to root the phone with no issues. I then got Titatnium Backup and enabled the chuck norris thing to freeze bloatware. I rebooted the phone and now it says Samsung lights up the intro screen and then after that I can't see ANYTHING. Please if anyone can help I'm moving to Seattle in 2days and this will be my only source of info/communication till my things arrive 10days after me. I NEED this to work : /
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Just go into development section, find a stock odin .tar and odin itself and use it to reflash the latest stock rom. Dont panic, Its pretty hard to brick a Samsung, not impossible but pretty hard.......
Sent from my SCH-I510 using XDA App
I appreciate the quick responses, I'm honestly losing it the phone was a gift and here I am mucking it up. I would like to keep it rooted as my last phone was and never had an issue. I think the issue was somewhere with the Titanium Backup Mod. Is there anychance you could link me to this odin flash program you speak of? I'm very new to this and confused, would rather not make this problem worse. Thanks again!
Ok I have downloaded Odin3, now I just need to know how to use it and with what files to get my Continuum working again. I tried to read through some posts but everyone is so confusing >.<.
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Aesik said:
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Click to expand...
Click to collapse
first some questions,
did you do a nandroid backup
did you download the odin files from dj20 thread
did you download cwm recovery
and you dont really need the pit file, i been flashing files without it
Files
Aesik said:
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/20459391/SCH-i4000-VZW-Continuum.pit
http://dl.dropbox.com/u/20459391/0530_continuum_novoodoo.zip
Use this pit and this kernal in pda via Odin. Jump in the IRC for more help.
i think i bricked my continuum too. i flashed cwm recovery and got root and everything fine, then accidently flashed the wrong voodoo file and now it wont go past the samsung screen. ive looked for stock roms everywhere. how do you flash the kernel and pit. i got the pit file in but how do you select the folder for the kernel
can you still get into recovery?
VOoDOo
VooDoo convert takes a long time. Have you tried to wait it out?
Hello I too have prob. I flashed clean rom then tried to restore my nandroid backup but it says error mounting system and I cant now wont go past samsung no matter what I try?
Go to the link below. The only problem is the one-click unroot has a peculiar side-effect: it will make you believe your Continuum is invincible, and you'll try all sorts of crazy stuff with it!
http://www.addictivetips.com/mobile/one-click-unbrick-for-samsung-phones-having-odin-guide/
I forgot to mention, you need to be in download mode. Remove the battery, and hold the vol- while inserting the usb cable until the screen indicates that you're in download mode. I hope this helps!
Ok I got it to boot into clean rom again but along the way I did a system wipe so my question is how to restore backup and get apps/data back? What was I doing wrong? I have titpro and nandroid backup saved and copy of sd card on my laptop so any help is appreciated...
Sent from my SCH-I400 using XDA Premium App
nodixe said:
Ok I got it to boot into clean rom again but along the way I did a system wipe so my question is how to restore backup and get apps/data back? What was I doing wrong? I have titpro and nandroid backup saved and copy of sd card on my laptop so any help is appreciated...
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
A nandroid backup isn't going to be much help without root. If you have it, get rooted, and flash adrynalyne's framework and cwm. Then you should be able to restore.
Ok...so I need to reroot? This why I wanted to restore it in 1st place. Su is installed and it opens from appdroor but says bin needs update but the zip wont work that it dl's to my sd? I thought root was included on clean rom? Or do I have to SOC again?
Sent from my SCH-I400 using XDA Premium App
Uh... Your restore problem is probably because your using yellow cwm... it has problems.... Im not sure if there are any other questions really xP
And read the other threads please? Everybodys already had these problems and they've been solved months ago
Sent from my Continuum Transfunctioner
nodixe said:
Ok...so I need to reroot? This why I wanted to restore it in 1st place. Su is installed and it opens from appdroor but says bin needs update but the zip wont work that it dl's to my sd? I thought root was included on clean rom? Or do I have to SOC again?
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
You might have to SOC again. Alternatively, if you really need it, I have a DL17 ODIN bone-stock rom, both rooted and unrooted, and if push comes to shove, I can upload it and post it here.
The yellow CWM uses edify which to my understanding is only useful for 2.2 and above. You wont be able to install any zip files designed for 2.1 or before. You need the cyan version of update.zip which will allow you to reinstall the stock rom software. Send me a PM and Ill email you the proper update.zip file if you need it.
-J