Database Users

Help: Flashed a bad radio and bricked my phone

SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I flashed the 2.22.23.02 through fastboot by mistake and now I can't get into recovery mode, or flash any other radios onto the phone. The fastboot menu is the only thing I can get to on the phone.
I tried reflashing the 2.22.23.02 again but it won't go through...
Anyone have any ideas on what I can do to unbrick it?
Edit: Tried sappimg.nbh via volume down and power button but i get a Model ID error. Now i can't fastboot anything over to my phone.
Edit: Flashed the sappimg.nbh, sappimg 2.16.707.3, sappimg 2.53.707.2, via gold card but I now get the error: Main Version is older!

I have answered similar questions before...
Use the search function.
But to get you started here is a quick solution.
1) flash eng spl that starts with 1.33.20XX where XX can be 05,09 or 10.
Restart into fastboot.
2) flash the right spl/radio/recovery combo.
This is confirmed to work....
Next time post ALL fastboot info... there are some info mission in your post!

all the fastboot info...
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I have just tried flashing hboot-1.33.2010 via fastboot.
However, I get the error message:
sending 'hboot' (512 KB)... FAILED (remote: not allow)

do this:
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
in http://forum.xda-developers.com/showthread.php?t=605239

Unfortunately... I can't boot into recovery either, nor can i push a recovery image to the phone. I get the same error: "fastboot:remote not allow".

ok... you are very limited...
Do this:
Find a suitable sappimg.nbh... Not sappimg.zip...
Use this which i just uploaded for you:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Using your goldcard flash the sappimg.nbh in fastboot.
The sappimg.nbh does not need any unzipping... it's a complete img of the nand and overwrites everything.

I can't seem to find the answer to this anywhere....
is there a way to create a goldcard at this point for me?
I can't get into debug mode on the phone (for obvious reasons) and therefore can't do adb....

Find ANY android device and make a goldcard...
Then use the goldcard on your device...

wouldn't suppose anyone have the goldcard.img from their email that they could send me...

1)Download the -G magic RA recovery
2) rename it to recoveryG.img
3) run 'fastboot boot recoveryG.img' (with the phone in fastboot mode)
4) allow recovery to boot then run the following adb commands
Code:
adb push recoveryG.img /tmp/recoveryG.img
adb flash_image recovery /tmp/recoveryG.img
5) Now power down the phone
6) boot into recovery by holding home+power
10) flash 1.33.2009 or 1.33.2010
Now you will have fastboot again
Most likely you will want to find and flash via fastboot radio 3.22.20.17 if you are not a Rogers/Fido customer or have signed the e911 wavier, otherwise you want 3.22.26.17..
After flashing the 3.x radio flash RA -h recovery via fastboot (and while in fastboot run 'fastboot erase system -w'); this will let you flash the ebi1 rom of choice

I just downloaded the recovery-RA-sapphire-v1.7.0G.img
renamed it so recoveryG.img.
When i try to run the command: fastboot boot recoveryG.img
I get the error message:
downloading 'boot.img'...FAILED (remote: not allow)

Then its best to just install the official e911 ruu from rogers and re-root

I have tried that, but it doesn't work...

What's your fastboot info?
Sent from my HTC Magic using XDA App

isn't the info on my first post the fastboot info?

bigbrotherbear said:
isn't the info on my first post the fastboot info?
Click to expand...
Click to collapse
Yes, I'm also not sure why people are ignoring that fact that you can't use fastboot either :-S

My bad, using my phone and completely missed the first page.
EDIT: I think mum was on the right track. Your going to need a goldcard. No one will be able to send you their .img because its SD card specific. You don't know anyone with a Android based phone?
Sent from my HTC Magic using XDA App

Looks like i'm getting progress....?
I have a gold card now thanks to my friend, however...
when I try to flash the SAPPIMG.nbh I get a Main Version is older!
I also tried the 2.53.707.2 SAPPIMG.zip and I still get this error.
I also just tried 2.16.707.3 SAPPIMG.zip and I still get this error.

YOU ARE STILL MAKING THE GOLDCARD THE WRONG WAY...
You should not get that error msg...
Try to remake the goldcard.

Did it on two different SD cards, the same way I did it before to get my phone off perfected SPL... not sure what I could've done to do it wrong this time around.....
a mmc CID can't change right?
followed this guide:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/

[Q] Can i unbrick my magic 32a?

i think i brick my phone...how when i power on,it only keeps on boot into htc magic...so is there any think i can do or?

Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?

mumilover said:
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
Click to expand...
Click to collapse
i dont have a fasboot & recovery access...
i root my phone with universal androot,using rom manager i successfully flash recovery,then i download rom..i kinda like want to look around the rom manager app and i accidentally press ok with the backup & clear cache?the phone start to restart and now i cant turn on my phone
my phone is...
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
its because of the perfected spl right?

From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...

ekie84 said:
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
Click to expand...
Click to collapse
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!

TheBladeofFate said:
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
Click to expand...
Click to collapse
yes it say s-on H

mumilover said:
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
Click to expand...
Click to collapse
when i hold back+power (recovery) & hold menu+power (fastboot) nothing happen...all i can see is the "htc magic"
its ok then...i've email the service centre & their say if they can reflash the rom successfully their will charge me rm80

Similar Issue
Hey Guys and Girls,
This is my first time posting on this site. I have run into a similar issue and have attempted to post on numerous sites without having any luck solving the problem.
The quick version: I ran z4root to root my phone; it said successful. I then installed Rom Manager and switched my recovery to Clockwork (the most recent one). Next I downloaded the latest CM6 from the Rom Manager with GApps. After having unsuccessful attempts at backing up and wiping first, I decided to try installing the Rom without backing up or wiping data. The Rom install worked this time (I got installation successful). However, when the phone rebooted itself, it never got past the Rogers screen. It is now in a constant state of rebooting until I pull the battery.
I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAP50000)
CPLD-12
RADIO-6.35.16.19
Some other info that may help:
-my PC recognizes my phone (I have been trying the Radio Switcher v.GUI 4.1 and it says the phone is connected) but it is not allowing me to flash anything.
-When I try "adb devices" it gives error: no device attached but "fastboot devices" gives me a number.
-I have tried putting "recovery-RA-sapphire-v1.7.0H" on my sdcard, but the HBoot says no image or wrong image
-The Radio Switcher v.GUI 4.1 says my phone is not rooted
-I tried the goldcard method of rooting, but because I can't get the phone to recognize the sdcard, I can't get a proper CID for the goldcard creator
Hopefully I've provided enough info to get some help. I am waiting patiently, but am starting to get sick of the old Sony Ericsson Anything helps!

Run this 2 commands in fastboot and post here the ourput.
Code:
fastboot oem h
fastboot getvar version-main

Here is the info you required.
C:\AndroidSDK\platform-tools>fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.009s]
finished. total time: 0.009s
C:\AndroidSDK\platform-tools>fastboot getvar version-main
version-main: 3.54.631.3
finished. total time: 0.001s

run this command to activate the sdcard:
Code:
fastboot oem enableqxdm 1
You have to make a goldcard... if you can't make it using your device, then do it using any other android device.
When you have made the goldcard come back here, and i'll guide through the rest :0)

Done. I made a gold card previously...hopefully it still works. Once it's made into a goldcard, is it always a goldcard?

Actually... re-checking your info - you don't need a goldcard..
No need for sdcard either...
Download this sappimg.zip :
http://rapidshare.com/files/437924840/sappimg.zip
Then run this command from a command prompt:
Code:
fastboot flash zip sappimg.zip
Make sure that the sappimg.img is in the same folder as fastboot.exe
The sappimg.zip is the newest rogers update... the same version as you currently have...
No need for goldcard or anything :0)
if you get any troubles, then post here the outcome of the command prompt..
When all is done, you should be back on stock 2.1...
From there you follow my guide (check my signature) to root and get custom recovery.
Good luck

hi guys,
i got the same problem, here im my country nobody knows how to solve (im from brazil)
when a tryed to updade with sapping file, in the radio part, the screen became dark, then white.
now I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008 (SAP60000)
CPLD-12
RADIO-3.22.20.17
my PC recognizes my phone but it is not allowing me to flash anything.
When I try "adb devices" it gives error: no device attached but fastboot command works fine.
i have my first goldcard.
this forum is my last hope... if anyone know how to proced, help me pls

I had the same problem as a few of you and after trying everything I eventually decided to try installing SAPPIMG.zip from hboot and it worked fine. Took me a while to find the correct SAPPIMG but you should be able to find it on the forums here. You have to put the SAPPIMG.zip on the root of your SD card from your computer, put it in the phone, boot into fastboot and go into hboot and it'll load the SAPPIMG file. If you have the wrong SAPPIMG it'll usually give you an error when trying to install it'll say someting like update failed or wrong device ID. It took me about 4-5 different SAPPIMG to find the correct one for my phone.

Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s

The phone starts the box with the arrow and then after a few seconds it shutdowns
Dear Mumi,
Dear All Please help me...
my htc magic white before flashed is :
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_ NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Root build RA-sapphire-v1.6.2H
After Flashing and update both of radio and SPL
RUU_Sapphire_HTC_Asia_WWE_3.03.728.4_SEA_release_s igned_NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
At the time My HTC Magic is working, but I can't root and also in the ROM it self missing android market.
then installed Universal androd and working...Last night i just tried to factory reset and The phone starts the box with the arrow and then after a few seconds it shutdowns, any idea to get in fastboot or just make HTC start normally
Thank in advance

cj.smith14 said:
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
Click to expand...
Click to collapse
Hmm... try this:
Code:
fastboot oem rebootRUU
The above will set the device into RUU mode.
Then download the official rogers RUU..
Run it and it should install just fine... no need for goldcard or sdcard..
I hope this will work.

atrix.suhendra said:
....
Click to expand...
Click to collapse
fastlan said:
.....
Click to expand...
Click to collapse
Please start your own thread or else the OP will loose his opportunity to get proper help!
I will try to help where i can :0)

Hey,
I just wanted to say I appreciate all the time you are putting in to helping me. I just did the RUU install, but once it gets to the updating signature part I get:
ERROR [132]: SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.

[Q] Trouble rooting MT3g Fender - Cannot verify signature

I have looked through all of the threads dealing with this and I cannot find the answer I am looking for.
I am trying to root the MyTouch Fender and have gotten as far as the sappimg.img
However, once I am in command prompt and I try to flash the radio, I am getting that it cannot verify the signature.
All of the instructions/files I am using are from theunlockr.com
Moderators, if this is in the wrong section, please feel free to move it.

Forget about the sappimg... follow my guide... it's much more simple...
Check out my signature

Ok, I have two questions. First, will this method work with the Fender/1.2 model?
Also, as I have already mentioned, I have ran the sappimg and now the phone is stuck with a non working touch screen. I have no way of running the app. Everything has to be done through adb now.

Do you have access to the system/OS ?

Not at all.

Post here ALL your fastboot info.. ALL
Also the output from this command
Code:
fastboot getvar version-main

Ok, a new problem, now when I plug the phone in, it is not showing up in adb devices like it did two days ago.
Here is the fastboot info:
Sapphire Unknown 32b ship 2-on h
hboot-1.33.0009 (sapp31000)
cpld-13
radio-3.22.20.17
may 8 2009, 21:02:32
Fastboot USB
<Vol down> HBoot Mode
<Send> Reset Device
<Action> Restart to HBoot
<Menu> Power down
I do not know if it is any help but I punched in the command anyways and this is what it said:
version-main: 2.16.151.1
finished. total time: 0.00s

Follow this guide:
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
I just checked out the numbers... you should be good to go!
Just use this rom instead when you reach step 9:
http://cyanogenmod-mirror.local.host.name/ds/cm/stable/update-cm-6.0.0-DS-signed.zip

That was the guide that I was using to begin with. My original problem is that I cannot get past step 6. Every time I try to flash anything (the radio, hboot, recovery, etc) it tells me that it has failed, the signature could not be verified. Why would it be doing this?

Well.. you have been using the wrong sappimg.zip
Use this: http://rapidshare.com/files/436753940/2.53.707.2_-_sappimg.zip
Just rename it to sappimg.zip
Then follow the guide again... From step 2 :0)

Ok, I'll give it a shot and let you know!

Ok, I just tried it again and here is what I am getting:
sending 'radio' <21504 KB>...OKAY [35.703s]
writing 'radio'... INFOsignature checking...
FAILED <remote: signature verify fail>
finished. total time: 41.875s
This is where I have been stuck.

You need to follow the steps...
Like the goldcard og hboot mode are essentials for success...
Try again without using fastboot commands :0)

What do you mean about not using fastboot commands?

Chris.Thompson said:
Ok, I just tried it again and here is what I am getting:
sending 'radio' <21504 KB>...OKAY [35.703s]
writing 'radio'... INFOsignature checking...
FAILED <remote: signature verify fail>
finished. total time: 41.875s
This is where I have been stuck.
Click to expand...
Click to collapse
This is what i mean with fastboot commands...
Don't do the commands... use a goldcard and the right sappimg.zip

I need you to be a little more specific. What steps need to be taken when you say just use a gold card and the right sappimg? I am using a working gold card and the sappimg that you recommended but when the phone starts back up, I do not have a working touch screen.
To my knowledge, the way to correct this is to flash the proper recovery image. How can I do this without using fastboot commands?
Is there a writeup on the method you are recommending?

Ok, when in fasboot, at the top of the screen it says "s-on". Does this need to say "off" before it will stop rejecting the signature? Am I even on the right track?

Still haven't solved it. Any additional help would be very much appreciated! Thanks.

Hey. I had a similar problem and I fixed it by downloading a new SPL from this thread http://forum.xda-developers.com/showthread.php?t=529019 and putting it onto my SD Card.
Using Clockworkmod recovery, I installed the SPL from my SD Card (I chose Engineering SPL 1.33.2010) and then used the recovery to reboot, which completed the installation. When I later rebooted into fastboot mode, my info had changed to S-OFF. Then I had no problem upgrading the radio and SPL to the newer versions (which is what I was trying to do in the first place).
Hope that helps you.

Chris.Thompson said:
Still haven't solved it. Any additional help would be very much appreciated! Thanks.
Click to expand...
Click to collapse
What is your fastboot info now? I know this is kind of dead, but we'll see.

32B radio on a 32A, perfect SPL, no boot, only fastboot and stock recovery!

Hi to all! Sorry for my bad english!
I have a big problem with my Magic 32A. It can't boot (it stay on the splash screen when I try to boot), it can only go in fastboot and stock recovery. I have this words in bootloader:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
CPLD-12
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
FASTBOOT
<VOL DOWN> HBoot Mode
<SEND> Reset Device
<ACTION> Restart to HBoot
<MENU> Power Down
When I try to flash the engineering spl or a custom recovery or only boot into a custom recovery, it give always the same error:
"REMOTE: NOT ALLOW"
I read that someone used a goldcard but i don't now what is it and however I can't do one because I can't use any ADB commands (phone doesn't boot).
I read also that to solve my problem you need to know the version-main and the CID; these are mine:
version-main: 1.88.531.1
CID:TIM__401
So I can't do anything (the fastboot commands don't work because they give me the error remote:not allow) and I'm disperate! I hope someone will help me...Please write in this thread only if you can help me
Fede

Yo... got your pm.
It's always better to search or start a new thread... this way, my help is visible to everybody and all can benefit from it. All help over pm is lost and is a shame if anybody else is in the same problem.
The fix:
Download this file:https://rapidshare.com/files/191906182/2.15.901.4.zip
Download my fastboot commander tool found in my signature (not the magic version)
Using the tool, flash the file using the "Full zip" tab and do so inside fastboot mode.
It can take some time to finish....
Once done you should be back to stock 2.15.901.4 TIM Italy rom.
From there, follow my root guide which is found in my signature...
Good luck

Hi Mumilover!! Thank you a lot for you help but i can't boot yet. Fastboot Commander give me:
###Calling fastboot with: getvar version-baseband###
********************************
###Calling fastboot with: flash zip C:\Users\Fede\Downloads\2.15.901.4.zip###
********************************
Flashing "zip" - PLEASE WAIT.
Status of zip flash can only be seen on the "Actual-Output" tab!.
Did i do something wrong? i did what you said to me.
Please

nothing is wrong... it's gona take around 5 min to finish... All good

I have renamed the zip "sappimg" and i have applied it by hboot mode...it works!! Thank ou a lot Mumilover!! You saved me

No problem...

[Q] Semi Bricked Htc Magic 32B

Okay basically i got a htc magic,and on the first day of getting it,i rooted it and started playing around with the software,then i tried install the 2.2.1 rom but sadly failed,my mobile gets stuck on the vodafone uk splash screen
Heres the info you might need to know about it
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0004
CPLD - 10
RADIO - 2.22.28.25
apr 9 2009,23:30:40
The stuff i can do with it is
volume down+power=HBOOT
home+power which comes up with a triangle and a question mark in the middle
back+power which is fastboot
AND I ALSO CAN ACCESS THE FASTBOOT USB
I have tried installing differant vodafone uk sappimg's and update.zips but none work,i also have a program called HTC Android Phone ROM Update Utility 1.0.1.30 Which near to the end comes with the:
ERROR[131]:CUSTOMER ID ERROR
The ROM Update utility cannot update your Android Phone
Please get the correct ROM update Utility and try again
Can someone help me please ,my phone has been like this for 2 weeks now and its really ennoying

Anybody There
Hello can someone help me please,i have been to 3 differant vodafone stores all saying they cant help,iv been to carphone warehouse and Fones4U also saying there is nothing they can do,iv sent it to htc saying i have no warrenty and the phone stores like stalls are saying they wont be responsible if they accidently mess up my phone,i really need it fixed

Dont worry
Omfg i brought my phone back from the dead,i found the right ruu updater now its working

@Artic: tell me what the file is!

cereal86 said:
@Artic: tell me what the file is!
Click to expand...
Click to collapse
cereal86: do you have the exact same device? What errors are you getting?

i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!

cereal86 said:
i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!
Click to expand...
Click to collapse
Goldcard will only help if your error is related to the CID. If you have a branded phone (Rogers, for example) and you want to flash a ROM that is only meant for a different carrier (Vodafone, for example), the goldcard overrides the CID check and continues the process.
A checksum error could mean that the file has been altered.
Could you tell us exactly what information you see on your phone's FASTBOOT page? Model, HBOOT version, RADIO, S-ON/S-OFF, etc.
Thanks.

Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0

cereal86 said:
Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0
Click to expand...
Click to collapse
Okay, there at two issues to deal with first. You have a perfected SPL, 1.33.0014, and you are S-ON. The perfected SPL means that fastboot is crippled and won't let you do most things, and S-ON means it will only let you flash signed images.
***
*** This is one way to fix things, but I'm sure someone knows a better way. If someone knows a better way, please post ***
***
The first step is to unlock the bootloader. This will at least let you flash a custom recovery.
Go to HTC Dev and make an account. Once you've logged in, click on "Unlock Bootloader", then the "Get Started" button. You should be able to skip the RUU installation step, but, if you must do it, the file you want is at this link: SAPP10000 hboot 1.33.0014G. Follow the steps, send your ID token, receive the Unlock_code.bin, and flash it.
Once all of that is done, the bootloader should be unlocked (but still S-ON). You should now be able to flash a custom recovery using this guide: RA sapphire recovery. Scroll down to where it says "via fastboot". It says that is requires an ENG spl, but the unlocked bootloader should be enough. The file you want is: recovery-RA-sapphire-v1.7.0G.img
If you get into the custom recovery alright, you can try updating to an engineering SPL using a signed zip file. Go to this thread and download "roottools". Open it up and get "hboot_2010_signed.zip". Put it in the root (not in a folder) of an sdcard, put the sdcard into your phone and boot into recovery. Look for an option to install a zip file from your sdcard.
If that doesn't work, try renaming the hboot_2010_signed.zip to SAPPIMG.zip, put it on the sdcard and boot into HBOOT mode (Volume Down + Power). It will scan the sdcard and try to install SAPPIMG.zip.
If all of that goes well, let us know.

1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!

cereal86 said:
1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!
Click to expand...
Click to collapse
But did you actually try to flash a recovery image from fastboot?
Download this image: AmonRA 1.7.0G Recovery image
Put your phone into fastboot USB
Open a Command Prompt, cd to the recovery-RA-blahblah.img location, then type this:
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Let us know if that works.

impossible, when i send a command, i receive a error message "remote: not allow"

cereal86 said:
impossible, when i send a command, i receive a error message "remote: not allow"
Click to expand...
Click to collapse
How about:
fastboot boot recovery-RA-sapphire-v1.7.0G.img

i receive a error message "remote: not allow"

cereal86 said:
i receive a error message "remote: not allow"
Click to expand...
Click to collapse
Hmmm. Are you able to enter HBOOT mode? Turn the phone completely off (or pull the battery), then hold VOLUME DOWN and POWER until it says HBOOT.

Yes, i can enter hboot and fastboot

cereal86 said:
Yes, i can enter hboot and fastboot
Click to expand...
Click to collapse
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.

DasBub said:
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.
Click to expand...
Click to collapse
BTW, if it gives you a "main version is older" error, we can fix that.

as soon i tested all the ways, i'll report to you! BIG THANKS to you! cheers!

Let's catch up: i have an sapphire 32B S-ON G, spl 1.33.0014 unlocked, radio 2.22.19.23
1. when i run RUU i get error "bootloader version"
2. all the things i do with fastboot, receive error "remote: not allow"
2.1 when use fastboot oem rebootRUU and then use fastboot flash nbh rom.nbh, received error "Failed (remote: 43 main version check fail)"
3. using sdcard SAPPIMG.nbh (from RUU):
3.1 Non goldcard: transcend 8GB "Main Version is older!"
3.2 Goldcard: kingston 4GB "Main Version is older!"
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
is there any tool to edit the edit NBH file and "fool" the phone?
I'll need to buy a 2gb kingston sdcard?
can i flash ruu hboot 1.76.0013 and try all the process?