[Q] Trouble rooting MT3g Fender - Cannot verify signature - myTouch 3G, Magic General

I have looked through all of the threads dealing with this and I cannot find the answer I am looking for.
I am trying to root the MyTouch Fender and have gotten as far as the sappimg.img
However, once I am in command prompt and I try to flash the radio, I am getting that it cannot verify the signature.
All of the instructions/files I am using are from theunlockr.com
Moderators, if this is in the wrong section, please feel free to move it.

Forget about the sappimg... follow my guide... it's much more simple...
Check out my signature

Ok, I have two questions. First, will this method work with the Fender/1.2 model?
Also, as I have already mentioned, I have ran the sappimg and now the phone is stuck with a non working touch screen. I have no way of running the app. Everything has to be done through adb now.

Do you have access to the system/OS ?

Not at all.

Post here ALL your fastboot info.. ALL
Also the output from this command
Code:
fastboot getvar version-main

Ok, a new problem, now when I plug the phone in, it is not showing up in adb devices like it did two days ago.
Here is the fastboot info:
Sapphire Unknown 32b ship 2-on h
hboot-1.33.0009 (sapp31000)
cpld-13
radio-3.22.20.17
may 8 2009, 21:02:32
Fastboot USB
<Vol down> HBoot Mode
<Send> Reset Device
<Action> Restart to HBoot
<Menu> Power down
I do not know if it is any help but I punched in the command anyways and this is what it said:
version-main: 2.16.151.1
finished. total time: 0.00s

Follow this guide:
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
I just checked out the numbers... you should be good to go!
Just use this rom instead when you reach step 9:
http://cyanogenmod-mirror.local.host.name/ds/cm/stable/update-cm-6.0.0-DS-signed.zip

That was the guide that I was using to begin with. My original problem is that I cannot get past step 6. Every time I try to flash anything (the radio, hboot, recovery, etc) it tells me that it has failed, the signature could not be verified. Why would it be doing this?

Well.. you have been using the wrong sappimg.zip
Use this: http://rapidshare.com/files/436753940/2.53.707.2_-_sappimg.zip
Just rename it to sappimg.zip
Then follow the guide again... From step 2 :0)

Ok, I'll give it a shot and let you know!

Ok, I just tried it again and here is what I am getting:
sending 'radio' <21504 KB>...OKAY [35.703s]
writing 'radio'... INFOsignature checking...
FAILED <remote: signature verify fail>
finished. total time: 41.875s
This is where I have been stuck.

You need to follow the steps...
Like the goldcard og hboot mode are essentials for success...
Try again without using fastboot commands :0)

What do you mean about not using fastboot commands?

Chris.Thompson said:
Ok, I just tried it again and here is what I am getting:
sending 'radio' <21504 KB>...OKAY [35.703s]
writing 'radio'... INFOsignature checking...
FAILED <remote: signature verify fail>
finished. total time: 41.875s
This is where I have been stuck.
Click to expand...
Click to collapse
This is what i mean with fastboot commands...
Don't do the commands... use a goldcard and the right sappimg.zip

I need you to be a little more specific. What steps need to be taken when you say just use a gold card and the right sappimg? I am using a working gold card and the sappimg that you recommended but when the phone starts back up, I do not have a working touch screen.
To my knowledge, the way to correct this is to flash the proper recovery image. How can I do this without using fastboot commands?
Is there a writeup on the method you are recommending?

Ok, when in fasboot, at the top of the screen it says "s-on". Does this need to say "off" before it will stop rejecting the signature? Am I even on the right track?

Still haven't solved it. Any additional help would be very much appreciated! Thanks.

Hey. I had a similar problem and I fixed it by downloading a new SPL from this thread http://forum.xda-developers.com/showthread.php?t=529019 and putting it onto my SD Card.
Using Clockworkmod recovery, I installed the SPL from my SD Card (I chose Engineering SPL 1.33.2010) and then used the recovery to reboot, which completed the installation. When I later rebooted into fastboot mode, my info had changed to S-OFF. Then I had no problem upgrading the radio and SPL to the newer versions (which is what I was trying to do in the first place).
Hope that helps you.

Chris.Thompson said:
Still haven't solved it. Any additional help would be very much appreciated! Thanks.
Click to expand...
Click to collapse
What is your fastboot info now? I know this is kind of dead, but we'll see.

Related

[Q] Can i unbrick my magic 32a?

i think i brick my phone...how when i power on,it only keeps on boot into htc magic...so is there any think i can do or?
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
mumilover said:
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
Click to expand...
Click to collapse
i dont have a fasboot & recovery access...
i root my phone with universal androot,using rom manager i successfully flash recovery,then i download rom..i kinda like want to look around the rom manager app and i accidentally press ok with the backup & clear cache?the phone start to restart and now i cant turn on my phone
my phone is...
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
its because of the perfected spl right?
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
ekie84 said:
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
Click to expand...
Click to collapse
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
TheBladeofFate said:
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
Click to expand...
Click to collapse
yes it say s-on H
mumilover said:
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
Click to expand...
Click to collapse
when i hold back+power (recovery) & hold menu+power (fastboot) nothing happen...all i can see is the "htc magic"
its ok then...i've email the service centre & their say if they can reflash the rom successfully their will charge me rm80
Similar Issue
Hey Guys and Girls,
This is my first time posting on this site. I have run into a similar issue and have attempted to post on numerous sites without having any luck solving the problem.
The quick version: I ran z4root to root my phone; it said successful. I then installed Rom Manager and switched my recovery to Clockwork (the most recent one). Next I downloaded the latest CM6 from the Rom Manager with GApps. After having unsuccessful attempts at backing up and wiping first, I decided to try installing the Rom without backing up or wiping data. The Rom install worked this time (I got installation successful). However, when the phone rebooted itself, it never got past the Rogers screen. It is now in a constant state of rebooting until I pull the battery.
I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAP50000)
CPLD-12
RADIO-6.35.16.19
Some other info that may help:
-my PC recognizes my phone (I have been trying the Radio Switcher v.GUI 4.1 and it says the phone is connected) but it is not allowing me to flash anything.
-When I try "adb devices" it gives error: no device attached but "fastboot devices" gives me a number.
-I have tried putting "recovery-RA-sapphire-v1.7.0H" on my sdcard, but the HBoot says no image or wrong image
-The Radio Switcher v.GUI 4.1 says my phone is not rooted
-I tried the goldcard method of rooting, but because I can't get the phone to recognize the sdcard, I can't get a proper CID for the goldcard creator
Hopefully I've provided enough info to get some help. I am waiting patiently, but am starting to get sick of the old Sony Ericsson Anything helps!
Run this 2 commands in fastboot and post here the ourput.
Code:
fastboot oem h
fastboot getvar version-main
Here is the info you required.
C:\AndroidSDK\platform-tools>fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.009s]
finished. total time: 0.009s
C:\AndroidSDK\platform-tools>fastboot getvar version-main
version-main: 3.54.631.3
finished. total time: 0.001s
run this command to activate the sdcard:
Code:
fastboot oem enableqxdm 1
You have to make a goldcard... if you can't make it using your device, then do it using any other android device.
When you have made the goldcard come back here, and i'll guide through the rest :0)
Done. I made a gold card previously...hopefully it still works. Once it's made into a goldcard, is it always a goldcard?
Actually... re-checking your info - you don't need a goldcard..
No need for sdcard either...
Download this sappimg.zip :
http://rapidshare.com/files/437924840/sappimg.zip
Then run this command from a command prompt:
Code:
fastboot flash zip sappimg.zip
Make sure that the sappimg.img is in the same folder as fastboot.exe
The sappimg.zip is the newest rogers update... the same version as you currently have...
No need for goldcard or anything :0)
if you get any troubles, then post here the outcome of the command prompt..
When all is done, you should be back on stock 2.1...
From there you follow my guide (check my signature) to root and get custom recovery.
Good luck
hi guys,
i got the same problem, here im my country nobody knows how to solve (im from brazil)
when a tryed to updade with sapping file, in the radio part, the screen became dark, then white.
now I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008 (SAP60000)
CPLD-12
RADIO-3.22.20.17
my PC recognizes my phone but it is not allowing me to flash anything.
When I try "adb devices" it gives error: no device attached but fastboot command works fine.
i have my first goldcard.
this forum is my last hope... if anyone know how to proced, help me pls
I had the same problem as a few of you and after trying everything I eventually decided to try installing SAPPIMG.zip from hboot and it worked fine. Took me a while to find the correct SAPPIMG but you should be able to find it on the forums here. You have to put the SAPPIMG.zip on the root of your SD card from your computer, put it in the phone, boot into fastboot and go into hboot and it'll load the SAPPIMG file. If you have the wrong SAPPIMG it'll usually give you an error when trying to install it'll say someting like update failed or wrong device ID. It took me about 4-5 different SAPPIMG to find the correct one for my phone.
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
The phone starts the box with the arrow and then after a few seconds it shutdowns
Dear Mumi,
Dear All Please help me...
my htc magic white before flashed is :
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_ NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Root build RA-sapphire-v1.6.2H
After Flashing and update both of radio and SPL
RUU_Sapphire_HTC_Asia_WWE_3.03.728.4_SEA_release_s igned_NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
At the time My HTC Magic is working, but I can't root and also in the ROM it self missing android market.
then installed Universal androd and working...Last night i just tried to factory reset and The phone starts the box with the arrow and then after a few seconds it shutdowns, any idea to get in fastboot or just make HTC start normally
Thank in advance
cj.smith14 said:
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
Click to expand...
Click to collapse
Hmm... try this:
Code:
fastboot oem rebootRUU
The above will set the device into RUU mode.
Then download the official rogers RUU..
Run it and it should install just fine... no need for goldcard or sdcard..
I hope this will work.
atrix.suhendra said:
....
Click to expand...
Click to collapse
fastlan said:
.....
Click to expand...
Click to collapse
Please start your own thread or else the OP will loose his opportunity to get proper help!
I will try to help where i can :0)
Hey,
I just wanted to say I appreciate all the time you are putting in to helping me. I just did the RUU install, but once it gets to the updating signature part I get:
ERROR [132]: SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.

[Q] MT3G 1.2 -the process android.process.acore has stopped unexpectedly at startup

Hi,
I have a tmobile mytouch 3g 1.2 (3.5mm jack phone). I tried to root my phone and it failed during the SYSTEM---UnZipping process. (it stuck there forever). I then looked at options of unrooting it. When I apply SAPPIMG.zip it says Main Version Older! Update Fail!
Then I reboot the phone in recovery mode (tried to reset to factory settings and then reboot). The phone gives me the below error upon startup. The only thing i can see is an notification bar.
the process android.process.acore has stopped unexpectedly. "FORCE CLOSE"
Please can someone help me how to get my phone working? Appreciate all your help!
If you go to tmobile.com then go to there forum under android development you will see a topic called how to unroot the mytouch. In that topic they have a link for the original sappimg .. download to your zip cars in the root of the card (no folders) then just boot into hboot and apply the sappimg. I have done it many times so I know it works. Then when you go to root your just us the universal androot method. Feel few to pm me i
ent from my HTC Magic using XDA App
Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)
I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.
mumilover said:
Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)
Click to expand...
Click to collapse
I tried the command - fastboot getvar version-main
it just says < waiting for device > and then nothing happens...
also when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...) can this number be used in any manner for anything
housry23 said:
I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.
Click to expand...
Click to collapse
i did not take any nandroid backup ...i got into revovery boot...but whn i did the wipe clean option and reboot i get this error.
to make a gold card i would need to have the USB debugging enabled right? I am not able to go past the error screen (Home does not work, settings does not work )
and when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...)
is there any other way to enable the USB Debugging as I am not able to open settings or even see anything on my phone...?
Would there be any option that's something like doing a System Restore to an earlier date on Windows OS on the computer?
please let me know the next steps...appreciate all of your help...
It's driver related.
Fix the drivers and try again to run the commands.
mumilover said:
It's driver related.
Fix the drivers and try again to run the commands.
Click to expand...
Click to collapse
You mean re-install the USB drivers for mytouch 3g? i tried that but still nothing happens...
Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...
mumilover said:
Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...
Click to expand...
Click to collapse
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?
ganesh.raj.ms said:
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?
Click to expand...
Click to collapse
Hey, i tried the below. can you please let me know if this is correct? and what do i do next?
userdebug-img-14721_1.zip
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 1.33.0013
Baseband Version.....: 2.22.23.02
Serial Number........: HT03TPB01582
--------------------------------------------
checking product... FAILED
Device product is 'sapphire'.
Update requires 'trout'.
finished. total time: 0.042s
how do i try to rectify the checking product...FAILED???
OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...
mumilover said:
OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...
Click to expand...
Click to collapse
Is it the below that you want?
[FONT=&quot]SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27[/FONT]
Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices
mumilover said:
Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices
Click to expand...
Click to collapse
adb devices does not give me anything...its not working
Does the computer recognise the device?
Maybe it's driver related...
PS: check your pm

need help on rooting mt3g 3.5mm

sapphire pvt 32a ship s-on g
hboot-1.33.0013 sapp31000
cpld-13
radio-6.35.16.19
oct 21 2009 22:33:27
the method i use to create a gold card from theunlockr.com i follow every step and even do a full format to fat32 before using hexeditor. save it and when i remove the micro sd card from my laptop it didnt read and need to be format in order to use it.
i use GoldCardTool_0.0.5 to create a gold card and i download sappimg.zip from http://forum.xda-developers.com/showthread.php?t=547133
the main version is older error
could anybody explain to me what i did wrong. i could access hboot and fastboot menu but no recovery menu
Asumbod1 said:
sapphire pvt 32a ship s-on g
hboot-1.33.0013 sapp31000
cpld-13
radio-6.35.16.19
oct 21 2009 22:33:27
the method i use to create a gold card from theunlockr.com i follow every step and even do a full format to fat32 before using hexeditor. save it and when i remove the micro sd card from my laptop it didnt read and need to be format in order to use it.
i use GoldCardTool_0.0.5 to create a gold card and i download sappimg.zip from http://forum.xda-developers.com/showthread.php?t=547133
the main version is older error
could anybody explain to me what i did wrong. i could access hboot and fastboot menu but no recovery menu
Click to expand...
Click to collapse
ummm, use universal androot to get root. then just use terminal emulator to flash a custom recovery! You can find the .apk online or on the market (if it is still there)
You have a perfected spl so no fastboot access.
thank for the tip but is that method for the old mt3g only. im stuck at the boot screen and it wont boot up. do you think because there norom were flash that why it didn't boot up
i tried sappimg image again it still got the same error. i would like to know what is the best method for creating a gold cards. the type of card i was using is a kingston 2gb micro sd
please help root or unroot my phone i been doing research but still no progress try alot of tutorial
This has happened to me before and what i did is I looked for another sappimg.zip file on Google. The one on the link you said would always tell me that the main version was older.
cmacia06 said:
This has happened to me before and what i did is I looked for another sappimg.zip file on Google. The one on the link you said would always tell me that the main version was older.
Click to expand...
Click to collapse
Easy with this. You load the wrong sappimg and your phone will turn into a paperweight. Your either doing something wrong in the goldcard process or your SD card isn't going to work. Got another to try and use? Your in a boot loop because your using the wrong radio BTW.
Sent from my HTC Magic using Tapatalk
thank you guy for helping. can you guy provide me a link to the right sappimg.zip for my phone and how could i make a gold card if my phone doesn't boot up. I would like to know is there a way of making a gold card without a phone.
now that i found a sappimg .zip that read in my phone
sapphire unknown 32a eng s-off h
hboot-1.33.2010 sappp31000
cpl
radio-6.35.16.19
jun 2 2009 17:27:13
im stuck at the radi0v2 part i let it load until the battery ran out. Please help what can i do to wipe out that radio that was mention to me it was the wrong radio.
You are VERY close to BRICK your device...
Follow my instructions, and you will be safe... READ ALL BEFORE YOU DO ANYTHING
You have a very bad spl/radio combo.
But luckily, you have eng spl, so we can still fix this!
1) Flash the 1.76.2007 spl to match the radio or else we will no be able to do ****!
Download my fastboot commander tool (from my signature, magic version).
Boot into fastboot mode
In the first tab(using the tool), select SPL, and navigate to "magicFiles" folder and find the spl version above (tagget "NewSPL").
Flash ONLY the SPL.
Reboot and verify that your hboot info changed.
2) Flash the right radio/spl/recovery combo.
Download this file:
http://rapidshare.com/files/432674806/MagicFenderCombo.zip
Still using the tool and the first tab, make sure that you now fill all 3 options. The "Flash all" button should be enabled by now. Go ahead and push it. If all goes well, then the only thing left is to flash a good rom using the custom recovery. I recommend cm6 to start with.
So, download this:
Download rom: http://cyanogenmod-mirror.local.host.name/ds/cm/stable/update-cm-6.1.0-DS-signed.zip
Download gapps: http://cyanogenmod-mirror.local.host...020-signed.zip
Reboot into recovery and flash the rom + gapps right after each other. Now reboot into system and enjoy.
IF you get ANY problems flashing the radio or spl... then DO NOT reboot the device, DO NOT close the tool. Take all the text from "Actual output" tab and post it here and wait for help. Or you could try to reflash ( some times the second time it works). Or try to flash only the parts which failed!
NB: Make sure that you have FULL battery before you continue!
Good luck
###Calling fastboot with: getvar version-baseband###
version-baseband: 6.35.16.19
finished. total time: 0.002s
********************************
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.33.2010
finished. total time: 0.002s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: 0.003s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP31000
finished. total time: 0.003s
********************************
###Calling fastboot with: getvar security###
security: off
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: ENG
finished. total time: 0.004s
********************************
###Calling fastboot with: flash radio C:\Users\T\Documents\FastbootCommanderV1.0_Magic_\MagicFiles\hboot-1.76.2007NewSPL.img###
sending 'radio' (512 KB)... OKAY [ 0.436s]
writing 'radio'... FAILED (remote: image update error)
finished. total time: 0.773s
********************************
please help
Why the FU*K are you flashing the spl on the radio partition...
Flash spl/hboot image on spl/hboot partition!!!!!!!!!!
that was my fault loading the wrong file but thank you for helping me out now my phone work again
I swore that he was going to brick his phone.
You need to be more careful while flashing a radio and spl. For your phone you can only have 1 radio and 1 spl (perfected spl). No other option. Anything else and you could end up having a bad day.
If you are getting Main Version Is Older when using the sappimg.nbh you will need to replace it with the 2.53.707.2 sappimg zip file. I cant post links yet so just google it. Dont extract it just leave it as a zip and make sure its just named sappimg. as long as you made your gold card correctly and your computer reads it, this will get you back to where you need to be to root.

HTC Magic 32B, unable to boot or flash from fastboot

I tried to upgrade my Radio with http://forum.xda-developers.com/showpost.php?p=9055790&postcount=1
Now (after 6 hours) I'm frustrated and I dont know what to do.
My Phone says:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013d (SAPP10000)
CPLD-10
RADIO-2.22.16.19
I can enter fastboot, but I'm not able to boot into the recovery. Also I'm not able to flash a new recovery, radio, hboot, boot, system or userdata.
If i try to flash something:
"INFOsignatur checking... FAILED (remote: signatur verify fail)"
If i try to boot into recovery:
"downloading 'boot.img' ... OKAY [1.703s]
booting...."
but nothing happens.
If i try to flash SAPPIMG.nbh it stucks on flashing radio.
Im really really frustrated and I hope someone can help me.
I've never seen that radio before. What I can tell you is that your going to have to downgrade using the goldcard method. You'll have to borrow a friends Android phone to make the goldcard. I'm sure by the time you get it made someone will be able to give more in depth directions or I'll be back in front of a computer.
Sent from my T-Mobile myTouch 3G using Tapatalk
I have created a Goldcard, but with a CID from a German forum, because non of my friends have a Android Phone
I tried to orange-1.58.73.2.nbh and sappimg.nbh from http://forum.xda-developers.com/showpost.php?p=9055790&postcount=1 but nothing works. Both stuck on "INFOstart image[radio] flushing ..."
You can't use the CID from another user. The CID is unique to the SD card, you need the CID for the SD card your using.
Sent from my T-Mobile myTouch 3G using Tapatalk
UPDATE:
Now i was able to flash a engineering SPL from an 32A sappimg.nbh . (android-hilfe.de/239127-post7.html for all german Magic users)
I can enter recovery *whuhuu* but still I'm not able to flash a new/other radio. Is there any solution for that?
UPDATE:
BRICKED ...
Deadspeller said:
UPDATE:
Now i was able to flash a engineering SPL from an 32A sappimg.nbh . (android-hilfe.de/239127-post7.html for all german Magic users)
I can enter recovery *whuhuu* but still I'm not able to flash a new/other radio. Is there any solution for that?
UPDATE:
BRICKED ...
Click to expand...
Click to collapse
Try putting the sappimg.nbh on your sdcard and then holding down the volume down + the power button and it should ask you to install and just press the scroll ball and it should fix your problem.
No its Bricked ;-)
But i found someone with an JTAG Interface.
Plz close
i am having similar trouble after:
* Format the Micro SD Card to FAT32.
* Copy the SAPPIMG.nbh file to the Micro SD Card.
* With the phone off, hold volume down and press power to boot into the bootloader.
* Once the bootloader is loaded, press power to install.
* Press the trackball to continue and press talk+menu+power to reboot.
I get:
parsing...[sapping.nbh]
1]radio_v2
2]bootloader
3]splash
4]recovery
5]boot
6]system
7]userdata
Do you want to start update?
yes
no
so i select yes and it says:
update in progress...
reading images...
checking signiture...
model id incorrect!
update fail!
i have magic 32b
please help
You need a goldcard.
Sent from my T-Mobile myTouch 3G using Tapatalk
I also have a magic (32B) and with the 1.33.0013d SPL I had a similar problem.
You need to read the first message of the 2708+ thread to the end to read how to flash to an old SPL (but you found that already).
I can only guess why you should try a G1 SPL or an 32A SPL on your phone since it seems like a recipe to brick the device. I reverted back to the SPL available from:
http://forum.xda-developers.com/showthread.php?t=529019
Since I had previous experience with the 2005 engineering-version I went for that one.
Did you also try to 2708+ to upgrade to Gingerbread?
All you did was correct but as DonJuan692006 said, you need a goldcard.
If you are running ubuntu you'll find a very simple tutorial (but in french) looking for didier.misson.net and golcard with google.
Good luck.
O-p
I have a similar problem.
I can't start ADB and I have no boot partition. Only FASTBOOT and HBOOT can be started.
Info of my phone (Google Developer Phone):
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.27.08
Oct 21 2009,22:33:27
Not boot partition:
$ fastboot oem boot
... INFO[ERR] boot image does not exist!!!
FAILED (status read failed (No such device))
finished. total time: 5.208s
No recovery can be started:
$ fastboot boot recovery-RA-magic-v1.2.3G.img
downloading 'boot.img'... FAILED (remote: not allow)
finished. total time: 0.001s
Then I downloaded the vf-sappimg-crc24-1.33.0007.nbh for the "Magic 32B" and copied it to the sd-card. I renamed it into sappimg.nbh and started HBOOT. But I only get the well know messages:
SD Checking ...
Loading...[SAPPDIAG.zip]
No image!
Loading...[SAPPDIA3.nbh]
No image or wrong image!
Loading...[SAPPDIA2.nbh]
No image or wrong image!
Loading...[SAPPDIAG.nbh]
No image or wrong image!
Loading...[SAPPIMG.zip]
No image!
Loading...[SAPPIMG.nbh]
No image or wrong image!
Has anybody an idea what I can do now?
Thank's a lot!!
Felix
Now I know my fault.
HBOOT ist case sensetive. The correct name for the SAPPING.nbh is "SAPPIMG" with capital letters and ".nbh" with small letters.

Mytouch 3g accidently flashed using wrong tutorial

I have read through for or so hours of everything I can find. I have a MT3G 3.5mm and thought I was following the proper steps to be able to flash ginger yoshi so I started to update.
I had this:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT 1.33.0013 (SAPP31000)
CPLD-13
RADIO 2.22.23.024
Now I have:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT 1.33.0013 (SAPP31000)
CPLD-13
RADIO 6.35.08.29
I have a sappimg.zip that is actually trying to flash except it starts to hang when it updates the radio. It will sit there for forever. I have left it going and the battery will die before it will finish updating the radio. I have been at this for quite a while now and really need help. I know I am supposed to be able to find a matching radio and spl. I tried flashing just the eng spl first, doesn't really do anything it just goes back to hboot. I have tried using fast boot and because it s-on it says no remote. I have tried going into the RUU usb mode and tried booting a recovery but it just sits there. It says it's booting but nothing happens. I did flash a recovery but that was with a 2.22 radio so I am guessing that the new radio that shouldn't be on there is messing it up. What else can i do here? I really need help!
You need read this topic: http://forum.xda-developers.com/showthread.php?t=1169301
##Calling fastboot with: flash zip C:\Users\Adonis\Downloads\special_sappimg.zip###
sending 'zip' (11094 KB)... OKAY [ 3.166s]
writing 'zip'... INFOadopting the signature contained in this image...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 6.384s
********************************
This is what I get when I try the first step. However, my situation is even more screwed. I am stuck at the RUU screen so all i have now is access via usb fastboot and fastboot commander. I can't get access through android commander. I have been trying to flash everything under the sun and when I do flash the proper sappimg.zip it just hangs when updating the radio and it hangs at like 97 percent and will not go any further no matter how long it's there.
To sum up. Followed this tutorial before and that's how I got here in the first place, because I thought I was following the right instructions to be able to get ginger yoshi but it turns out, my phone isn't what I thought it was.
Did you create goldcard properly?
Sent from my A7-040 using Tapatalk
HAAAAAAAA! SCREW ALL THAT .
I have the Mytouch 3G 1.2 (3.5mm Headphone jack) .
it was running android 2.2.1 and i used SuperoneClick root, then downloaded Rom Manager changed my Recovery and flashed ezGingerbread .
SIMPLE!
That's great and all but I would like help. I do not care about how awesome you are. I was unable to do superoneclick for some reason when I downgraded to 1.6. Nothing would work right. Rom manager would force close, universal androot would say that the phone was rooted and superoneclick would say that it wasn't.
Stuck in Ruu can't flash anything. Gets stuck on radio flash. Help. Accidentally flashed 32b board and chip files.
I did create a goldcard properly because i've used it over and over again without fail. It just hangs when flashing and doesn't finish flashing the radio.
Adonisd said:
##Calling fastboot with: flash zip C:\Users\Adonis\Downloads\special_sappimg.zip###
sending 'zip' (11094 KB)... OKAY [ 3.166s]
writing 'zip'... INFOadopting the signature contained in this image...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 6.384s
********************************
Click to expand...
Click to collapse
Did you ever read tutorial?
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
The device should reboot by it's self. If you get any error saying model id is no correct, you have a faulty goldcard. Also, please verify that the spl has changed to 1.76.xxxx. (flash by holding volume decrease (-) together with power and wait for the hboot to automatically pick up the file)
4) Once the device has rebooted, you should rename the 2.53.707.2_-_sappimg.zip to sappimg.zip and flash it using the goldcard. This image should give you an eng spl. If you device will not accept it/or you wish to have stock image, then rename the stock sappimg(2.10.531.4) to sappimg.zip and flash it the same way as the special sappimg.
5) If you indeed get the eng spl, then you have full control and we can do almost anything we want. Just post here and we can take it from there. The eng spl has the following nr: 1.33.2010.
If you flashed the stock sappimg, then you only need to root and flash custom recovery and you should almost be there... also here post the progress and we will take it from there.
After item 2 you must flash in hboot-mode (Turn off, then turn on by pressing VolumeDown + Power)
Please read always carefully, try to understand process and don't rush...
I cannot follow those steps to the T. I am stuck in RUU mode on my phone. So I cannot get back to the Hboot. I have been trying to flash everything with fastboot commander. I have a working gold card, just can't get back to where i can access it via phone. When I did have it working though, it was giving the same problem. It would just hang when trying to update the radio.
I have read and understood this particular tutorial. Infact it was the first I found after this particular problem started to occur. However, when I renamed and tried the files it would give the same error with the gold card. I have even, formatted and redone the gold card, which has always worked. Now I am stuck in Ruu and I do not think i can get access back to the bootloader.
Turn phone off (Remove battery, wait 2-3 minutes, place it back)
Turn on by pressing and holding Volumedown + power
What happening in this moment?
Sent from my A7-040 using Tapatalk
It goes straight to Ruu mode, no matter what i press or what buttons I hold down or no matter how long I leave the battery out.
Adonisd said:
It goes straight to Ruu mode, no matter what i press or what buttons I hold down or no matter how long I leave the battery out.
Click to expand...
Click to collapse
Try to run (it should escape from ruu-mode)
Code:
fastboot oem boot
Then turn off (cause phone is bootlooping) and load into hboot-mode
i got a bunch of text in the command prompt when I tried to run it that made it look like it was going to do it, then it just hung and did nothing.
Still in Ruu mode.
Once you are stock in ruu mode, you kinda fu*ked.
You need hboot and goldcard to fix the problem.
There is a command called: fastboot oem resetRUUflag
Try it out, but most likely it is not permitted...
Adonisd said:
I cannot follow those steps to the T. I am stuck in RUU mode on my phone. So I cannot get back to the Hboot. I have been trying to flash everything with fastboot commander. I have a working gold card, just can't get back to where i can access it via phone. When I did have it working though, it was giving the same problem. It would just hang when trying to update the radio.
I have read and understood this particular tutorial. Infact it was the first I found after this particular problem started to occur. However, when I renamed and tried the files it would give the same error with the gold card. I have even, formatted and redone the gold card, which has always worked. Now I am stuck in Ruu and I do not think i can get access back to the bootloader.
Click to expand...
Click to collapse
hmm if by now you havnt been able to access your phone, then maby perhaps you can do so by the commmand "" fastboot oem boot""
i have the same problem with this. STUCK IN RUU MODE!!!!
BUT I can open my phone via "fastboot oem boot". The only problem is whenever my phone has been turned off, it STUCKED in RUU MODE, so I need to go through "fastboot oem boot" again just to open my phone.
here's my device:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
=======HELP====ME======PLS==========
If this is not too late. Adonisd you need to stay on the 2.22 radio with that mt3g 1.2
Sent from my Dream/Sapphire using Tapatalk

Categories

Resources