Today I bought a HTC HD2 with the newest Winmo 6.5 rom.
The buttons: left call button, home button and lower volume button were working
I previously had bought a HTC HD2 and flashed Android on it.
Today I did the same steps, flashing Hardspl, new radio, ... but after installing Magldr I couldn't get into step 5 USB Flash mode because the call button didn't work. Strangely I was able to get into the bootloader mode with the lower volume button and then suddenly for 5 minutes all the buttons were working.
Installed Android and now it isn't working anymore. I tried to flash back the original Winmo rom but in that case the buttons weren't working either.
Anyone a solution ?
Sorry, but this really sounds like a hardware problem. Dismantle the phone and take a look in there, it may be quite fixable.
Related
I had an energy rom on my hd 2 until the weekend,
The phone was off so when I powerd it up the screen went straight to volume up, (like the up volume button was stuck.)
I tried doing a hard reset but couldnt get it to work, like the buttons werent working, so I reflashed with a stock rom.
Now the volume buttons , phone button and back button dont work anymore.
Even tried to put phone into bootloader mode but no joy there either.
Anyone one think this is hardware, or is it software.
Thanks for any help.
Hi,
I have a similar problem describe here. My problem seems to be a software issue cause my volume buttons work perfect on software but they don't work during startup.
Help!
guys... i ran into a problem yday ... was using the TyphooN CyanogenMod 7 v2.5 standard build when it occurred... after setting up the rom, tried the new cam with zoom function for vol keys... cam worked nicely and that was that for the time being... some time later, the home, windows key and backspace key became non-responsive and the vol key behaved as if it was always pressed down.. it wont increase the vol but will only decrease....except for the non-responsive keys, rom was fine...to correct it, i tried everything from rebooting to reloading diff roms... later tried a a wp7 build hoping it would alter the key mapping.. but nothing worked... also, when inside a rom (android or wp7), green button wont wake up the screen...
in magldr menu, there is a slight screen flicker... looks like screen focus is always moving down in a cyclic manner... as if the vol down key is kept pressed... i could hold the vol up key n select menu options with green button but only have to wait for the selection to come to the correct menu option n then quickly select it...
has anyone seen this issue before? any suggestion on how i could recover? is it a hardware error?
all suggestions n comments are welcome...
thanks!
Intro morning when I start my HD2 in Win ( I have Android on SD), on the screen appear permanently the volume controller (1-3 refresh per second) and I can't do nothing( touch button or touch screen, volume controller reappears) . In finily I removed volume controll from windows and I return to classic volume controll and now I can controll the screen.
But, but, but... The battery drain faster than before.Even if the phone is off, over night the battery is discharged.
I have all time UP volume button press, aparently. But in real , I remove flex cable and efect is similar. I think the problem is one shortcircuit (but I don't see nothing wrong) or motherboard is faulty ( the controller I/O inside the CPU). I check voltage and I have 1.86V for button volume up permanently.
What you think? You can help me?
Hi,
Could you tell me how you removed volume control from windows and returned to classic volume control? I am in to similar situation where it appears as though the volume-up button is stuck. I don't know how I got in to this. In desparation, I am in the process of flashing an Android ROM, hoping that it will fix the issue. As of now, I have flashed HardSPL and MAGLDR 1.13, but the problem still persists. The Android ROM is being downloaded now. After seeing that the issue did not get resolved till now, I feel that flashing the ROM too may not solve this problem. I am desperately looking for a solution. I cannot afford another HD2 phone. Please help.
Hi,
i have a htc touch hd with energy rom installed, i have read about the volume problem with this rom but i would like to make sure this is software related before i got any further, anyway heres my problem - as soon as i switch the phone on, everything loads then the volume up button presses itself constantly, causing the phone to constantly beep, if i then restart the phone, it vibrates 3 times and fails to come on, i have to remove the battery for a minute or so to get the phone back on then the same happens again.
so i installed the latest version of energy rom and it still happens except the volume control screen has been removed so now whenever im in a menu or drop box, it constantly changes the selected item to the option above (as if im physically pressing the volume up button).
is this software related or is the volume button physically broken.
the reason i ask before trying the patch is because the phone will need reflashin to be able to install the patch (because it will not work with the vol button stuck) and if i reflash with a stuck volume button it might crash and brick the phone. if its a hardware fault i am capable of fixing it myself.
Hello guys,
I have a question regarding HD2 hardware volume up button and ← back button malfunctions. The problem started a week ago when these 2 buttons were first working the other way around (when i pressed ← it was the volume button and volumbe button was ←) and now both of these have stopped working at all. I know that the problem is in ribbon cable and has to be changed. I have already ordered a new cable from EBAY. But tille then my problem is that the volume is down (not possible to turn up the volume) and I cannot hear the ringer tone or any sound. Right now I use vibrate for answering calls but iti is very Can I somehow turn the volume up via Registry? I have WP7 7.5 Mango installed on the device.
THank you in advance.
I just can tell you that in DFT Ultrafruit Rom you can easily remap keys with an app, also for volume up. Without reboot, so you can remap again after voluming up.
Is my first week and I haven't got deep into the Registry yet, so I can't say nothing else.
Sent from my Schubert using Board Express