Hello guys,
I have a question regarding HD2 hardware volume up button and ← back button malfunctions. The problem started a week ago when these 2 buttons were first working the other way around (when i pressed ← it was the volume button and volumbe button was ←) and now both of these have stopped working at all. I know that the problem is in ribbon cable and has to be changed. I have already ordered a new cable from EBAY. But tille then my problem is that the volume is down (not possible to turn up the volume) and I cannot hear the ringer tone or any sound. Right now I use vibrate for answering calls but iti is very Can I somehow turn the volume up via Registry? I have WP7 7.5 Mango installed on the device.
THank you in advance.
I just can tell you that in DFT Ultrafruit Rom you can easily remap keys with an app, also for volume up. Without reboot, so you can remap again after voluming up.
Is my first week and I haven't got deep into the Registry yet, so I can't say nothing else.
Sent from my Schubert using Board Express
Related
I've got a problem with my hd2. The volume buttons don't work (i found replacement on ebay but it will take some time to arrive).
How can i change the volume from windows, from software, without pressing the dedicated hardware buttons? i can't seem to find anything to press while in a call, and i can't hear the other person, especially while i'm outdoor.
anyone?
Today I bought a HTC HD2 with the newest Winmo 6.5 rom.
The buttons: left call button, home button and lower volume button were working
I previously had bought a HTC HD2 and flashed Android on it.
Today I did the same steps, flashing Hardspl, new radio, ... but after installing Magldr I couldn't get into step 5 USB Flash mode because the call button didn't work. Strangely I was able to get into the bootloader mode with the lower volume button and then suddenly for 5 minutes all the buttons were working.
Installed Android and now it isn't working anymore. I tried to flash back the original Winmo rom but in that case the buttons weren't working either.
Anyone a solution ?
Sorry, but this really sounds like a hardware problem. Dismantle the phone and take a look in there, it may be quite fixable.
Hello all,
I have recently done an upgrade to WM6.5 (Energy ROM) and now, when listening to music in PocketMusic 5.3.5, screen turns on by pressing the volume buttons to change volume, and the "ding" sound is played as when changing the volume manually. Also the Manila screen for changing volume is displayed and I have to cancel it. In stock WM6.1 it just changed the volume and screen stayed off. I have already tried playing with PocketMusic settings (like using system volume enabled/disabled, or key compatibility mode) and nothing helped.
I don't know if this is an issue with WM6.5 itself or with the particular ROM so I posted my question here (hopefully ok).
I liked to have the phone in my pocket and change volume just using my hand without taking the phone out. Well, those are the small annoyances that get me, but maybe someone has an idea or fix here, please? I already searched (on google and on these forums as well) but that didn't yield any results...
Mek7 said:
Hello all,
I have recently done an upgrade to WM6.5 (Energy ROM) and now, when listening to music in PocketMusic 5.3.5, screen turns on by pressing the volume buttons to change volume, and the "ding" sound is played as when changing the volume manually. Also the Manila screen for changing volume is displayed and I have to cancel it. In stock WM6.1 it just changed the volume and screen stayed off. I have already tried playing with PocketMusic settings (like using system volume enabled/disabled, or key compatibility mode) and nothing helped.
I don't know if this is an issue with WM6.5 itself or with the particular ROM so I posted my question here (hopefully ok).
I liked to have the phone in my pocket and change volume just using my hand without taking the phone out. Well, those are the small annoyances that get me, but maybe someone has an idea or fix here, please? I already searched (on google and on these forums as well) but that didn't yield any results...
Click to expand...
Click to collapse
you should try to re-mapping volume buttons with AEB Plus
Thank you for your reply.
I have installed the app but I am afraid it cannot do what I want.
I don't want to remap volume keys permanently - I still want to control the volume as it is now - but only when the screen is on. When screen is off, volume should be changed "on background" - without the ding sound and without turning the screen on. Hopefully I explained it right. Any more suggestions, please?
Hi every1,
Recently i have faced a lot of problems after my hd2 falled and screen braked - including the fact that mobile phone repair "fixed" my volume control buttons so good that after 1 week "volume -" button isn't working.
Atleast volume+ is working, so no problems with magldr and software rewriting will be faced.
So i have a q: can i do remapping of my hardware keys? I would like that the volume- and "search" button on hd2 wp7 would change their places, so i would be able to turn volume down when required(30/30 is very very loud), also would be nice to found out how to change the current system volume via registry editor(i think so it's possible). Also mb it's possible instead of doing things that i mentioned before - creating and easy app which would have 2 buttons Volume+ and Volume- so i could control whole system volume
So, i'm looking forward to hear from you soon guys and i hope so i would be able to enjoy music over headphones again,
Paul
This is my very first post, so I hope you can forgive me for any mistakes.
I buyed an secondhand ZUK Z1 from eBay. Everything was fine and dandy.
But after a week I encountered a problem. Firstly the Volume Down button did not respond properly then it utterly stopped working.
I buyed spare parts (side key) from the official ZUK-Store.
These are the contacts to connect with the "motherboard"(?)
I opened the the Z1 and even replaced the side key contacts myself.
After putting everything back together and powering on, the Volume Down Button still didn't work.
Volume Up button and Power-Button works perfectly but Volume Down does not...
I can press the Button normaly and hear the *click* noise.
I guess it's either a manufacturing error or some Software detecting error. Or something burned up inside. Well I don't know.
I can't access to recovery without the Volume Key. So yeah... i'm pretty frustated.
I'm typing this to find others with the same problem and would appreciate it when somebody knows more.
The device is not rooted
ROM: CyanogenOS 12.1-YOG4PAS60J
Phone struck
I too have the same volume down key problem. Because of that the phone enters boot menu and it becomes very difficult to come out of it till the phone shows some mercy on us. Once by chance if it works then the phone works absolutely normal. But it is a potential problem.