I had an energy rom on my hd 2 until the weekend,
The phone was off so when I powerd it up the screen went straight to volume up, (like the up volume button was stuck.)
I tried doing a hard reset but couldnt get it to work, like the buttons werent working, so I reflashed with a stock rom.
Now the volume buttons , phone button and back button dont work anymore.
Even tried to put phone into bootloader mode but no joy there either.
Anyone one think this is hardware, or is it software.
Thanks for any help.
Hi,
I have a similar problem describe here. My problem seems to be a software issue cause my volume buttons work perfect on software but they don't work during startup.
Related
ok i have a mogul 6800 and have not used my hard buttons for some time now. the scroll wheel works, round nav. button and power button. nothing else works while normal use. but heres what i dont understand, i can still hard reset my phone, and also put it in bootloader mode. but under normal circumstances they do not work. can some one help. i have taken it completely apart to see if by some chance something come lose, but nothing. also have tried a stock rom, several custom roms,and still get the same out come. is there a hardware upgrade by chance that might restore button function .
anybody?
not even a little help? something?
Wish someone smarter than I could help us out on this because mine is doing the same exact thing.
At first, I thought maybe the chip that worked those buttons failed but they work...for some things?? An example is my camera button will not open the camera but when I hold it and the power button and press reset, it will go to bootloader. My softkeys do not select and start the assigned program but when I hold both softkeys and press reset, I will do a hard reset.
I have tried reflashing my DCD 3.2.6 ROM, as well as several other DCD ROMs and Ryan's ROMs but the problem persists.
For no apperant reason volume and send(call) buttons stop working. When I press the buttons can only hear the clicks but nothing is hapening. Powering phone off and turning it back on, sorts the problem out for a wile but then it comes back again. Can any one help sort this problem out please?
installed any button binding programs? flashed a custom rom? tried hard reset?
Today I bought a HTC HD2 with the newest Winmo 6.5 rom.
The buttons: left call button, home button and lower volume button were working
I previously had bought a HTC HD2 and flashed Android on it.
Today I did the same steps, flashing Hardspl, new radio, ... but after installing Magldr I couldn't get into step 5 USB Flash mode because the call button didn't work. Strangely I was able to get into the bootloader mode with the lower volume button and then suddenly for 5 minutes all the buttons were working.
Installed Android and now it isn't working anymore. I tried to flash back the original Winmo rom but in that case the buttons weren't working either.
Anyone a solution ?
Sorry, but this really sounds like a hardware problem. Dismantle the phone and take a look in there, it may be quite fixable.
Hi,
i have a htc touch hd with energy rom installed, i have read about the volume problem with this rom but i would like to make sure this is software related before i got any further, anyway heres my problem - as soon as i switch the phone on, everything loads then the volume up button presses itself constantly, causing the phone to constantly beep, if i then restart the phone, it vibrates 3 times and fails to come on, i have to remove the battery for a minute or so to get the phone back on then the same happens again.
so i installed the latest version of energy rom and it still happens except the volume control screen has been removed so now whenever im in a menu or drop box, it constantly changes the selected item to the option above (as if im physically pressing the volume up button).
is this software related or is the volume button physically broken.
the reason i ask before trying the patch is because the phone will need reflashin to be able to install the patch (because it will not work with the vol button stuck) and if i reflash with a stuck volume button it might crash and brick the phone. if its a hardware fault i am capable of fixing it myself.
This is my very first post, so I hope you can forgive me for any mistakes.
I buyed an secondhand ZUK Z1 from eBay. Everything was fine and dandy.
But after a week I encountered a problem. Firstly the Volume Down button did not respond properly then it utterly stopped working.
I buyed spare parts (side key) from the official ZUK-Store.
These are the contacts to connect with the "motherboard"(?)
I opened the the Z1 and even replaced the side key contacts myself.
After putting everything back together and powering on, the Volume Down Button still didn't work.
Volume Up button and Power-Button works perfectly but Volume Down does not...
I can press the Button normaly and hear the *click* noise.
I guess it's either a manufacturing error or some Software detecting error. Or something burned up inside. Well I don't know.
I can't access to recovery without the Volume Key. So yeah... i'm pretty frustated.
I'm typing this to find others with the same problem and would appreciate it when somebody knows more.
The device is not rooted
ROM: CyanogenOS 12.1-YOG4PAS60J
Phone struck
I too have the same volume down key problem. Because of that the phone enters boot menu and it becomes very difficult to come out of it till the phone shows some mercy on us. Once by chance if it works then the phone works absolutely normal. But it is a potential problem.