Related
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
Hi all,
I thought I'd consult the brains trust to see if anyone thinks this is salvageable. Was using my A500 about 2 hours ago, suddenly the screen powered off. Thinking nothing of it, I held down the power button to restart it. When powering back on, nothing appears to happen except for the power button lighting up. No screen on, no vibe, nothing except the power light on.
Tried power cycling a few times to no avail. Tried the reset button. Tried the Vol+ Power and Rotation switch reset. Nothing.
Out of morbid curiousity, I plugged it into the PC and switched it on and I get an APX driver being installed. So, clearly something is happening here.
It has done this once before and came back to life of its own accord very shortly afterwards, this time it's been dead for quite some time.
Any suggestions? It's well out of warranty now, so I doubt Acer would be interested in it at all.
Dopius_Fishius said:
Hi all,
I thought I'd consult the brains trust to see if anyone thinks this is salvageable. Was using my A500 about 2 hours ago, suddenly the screen powered off. Thinking nothing of it, I held down the power button to restart it. When powering back on, nothing appears to happen except for the power button lighting up. No screen on, no vibe, nothing except the power light on.
Tried power cycling a few times to no avail. Tried the reset button. Tried the Vol+ Power and Rotation switch reset. Nothing.
Out of morbid curiousity, I plugged it into the PC and switched it on and I get an APX driver being installed. So, clearly something is happening here.
It has done this once before and came back to life of its own accord very shortly afterwards, this time it's been dead for quite some time.
Any suggestions? It's well out of warranty now, so I doubt Acer would be interested in it at all.
Click to expand...
Click to collapse
In the Dev threads, or possibly Q&A, there is a thread called "stuck in APX mode". In there I believe are some steps to see if you can recover.
But, if you're in APX mode, you could probably try NVFlashing the bootloader and recovery the old fashioned way manually.
But look up that APX thread first. Will probably have the answer. I'll see if I can find it in a little while, if you don't find it first.
MD
Moscow Desire said:
In the Dev threads, or possibly Q&A, there is a thread called "stuck in APX mode". In there I believe are some steps to see if you can recover.
But, if you're in APX mode, you could probably try NVFlashing the bootloader and recovery the old fashioned way manually.
But look up that APX thread first. Will probably have the answer. I'll see if I can find it in a little while, if you don't find it first.
MD
Click to expand...
Click to collapse
Thanks MD. I looked up the threads you suggested, and after a lot of screwing around I have installed the APX drivers and used blackthund3r's APX Flash Util 0.3 (The link is broken to the current version) to attempt a recovery of my tab.
Its now sitting at an Acer screen, "Entering Acer Download Mode" while the flash util is sitting at:
Nvflash started
[resume mode]
It's been there for about 10 minutes now, no progress to report. Is it worth just sitting it out, or now that the damn tab shows SOME signs of life, can I just restart it and reset to factory?
And then most bizarre of all. I declared no progress, rebooted it. It went back to APX mode.
Re-ran the blackthund3r tool, it didnt do much so I bailed that. Restarted tab and attempted to load recovery (vol + and power) and it booted normally.
What the hell...
Dopius_Fishius said:
And then most bizarre of all. I declared no progress, rebooted it. It went back to APX mode.
Re-ran the blackthund3r tool, it didnt do much so I bailed that. Restarted tab and attempted to load recovery (vol + and power) and it booted normally.
What the hell...
Click to expand...
Click to collapse
erm for now i would make sure you have all backups of data, cpud etc,.. just incase. you can just sit em on your computer i always try to keep a nandroid of all 3 of my devices each month or so.:good:
edit: and of course keep the link for the thread MD recommended.
Gee. Sounds exactly like mine....
The only thing I haven't tried is an update .zip, but I don't hold out much hope.
Considering parting out at this point....
Yeah, I dont have high hopes that it will last a whole lot longer. Up to this point it has been running Acer OTA updates only, no custom ROMs and no root.
I restarted the tab a little while ago and it went back into APX mode again and stayed there. Some more furious button mashing and attempted restore-mode boots, and it booted normally.
I made the point of wiping it this time using the Vol+ & Power & Rotation Lock trick and its been ok so far.
Dopius_Fishius said:
Yeah, I dont have high hopes that it will last a whole lot longer. Up to this point it has been running Acer OTA updates only, no custom ROMs and no root.
I restarted the tab a little while ago and it went back into APX mode again and stayed there. Some more furious button mashing and attempted restore-mode boots, and it booted normally.
I made the point of wiping it this time using the Vol+ & Power & Rotation Lock trick and its been ok so far.
Click to expand...
Click to collapse
I have a cousin in Jamaica. She might possibly help (chicken foot and some frogs blood...voodoo you know)
Here's What I think.
You got some corrupt data or a partially bad devblock. This might explain the strange behavior on boot.
Like the tab really doesn't know how to boot.
Personally I would do 1 of 2 things at this point. Either;
1. Root that thing, and try running Timmy Deans root back to 3.2. This should reset your partitions back to normal. Then work your way back to an ICS rooted, Bootloader, and custom rom.
2. Leave it alone, and don;t turn the tab off. Clearly some partitions are messed up at this point. The toggle of the lock usually wipes user data. But the core issue is still there.
If it were me, I would pull out the nuclear missile and go for it all.
MD
Moscow Desire said:
I have a cousin in Jamaica. She might possibly help (chicken foot and some frogs blood...voodoo you know)
Here's What I think.
You got some corrupt data or a partially bad devblock. This might explain the strange behavior on boot.
Like the tab really doesn't know how to boot.
Personally I would do 1 of 2 things at this point. Either;
1. Root that thing, and try running Timmy Deans root back to 3.2. This should reset your partitions back to normal. Then work your way back to an ICS rooted, Bootloader, and custom rom.
2. Leave it alone, and don;t turn the tab off. Clearly some partitions are messed up at this point. The toggle of the lock usually wipes user data. But the core issue is still there.
If it were me, I would pull out the nuclear missile and go for it all.
MD
Click to expand...
Click to collapse
Tried the update.zip - nada
Tried timmiedean yesterday, went into Acer Download mode OK, failed....
If dolps is like mien, the first time he tries to go into recovery, it will crash again...
It's baaaack!
Tried blackthunder flash again, failed.
Went to turn off to get out of APX, and it booted!
Now boots, boots to recovery and boots to primary.
I have no explanation.
We will see.
I am suspicious....
tennessee_titan said:
It's baaaack!
Tried blackthunder flash again, failed.
Went to turn off to get out of APX, and it booted!
Now boots, boots to recovery and boots to primary.
I have no explanation.
We will see.
I am suspicious....
Click to expand...
Click to collapse
I told you maaaannnn, go see me cousin in Jamaica maaaannnnn. She do some good things you see
Glad it's running again.
MD
First, is this a SOD?
I can kill it by booting into recovery and get it back by using Blackthunder flash tool to go into APX and letting it sit for 20 minutes or so. Close the program, unplug, reboot and it is back. I would like to use timmiedean (td) and go back to square 1, but it fails at the image detect ( displays ICS 4.0.3 Civato as the current image, a red X for the new image). Has td been proven to work reverting from ICS? Will a boot recovery reflash and a new ROM flash solve this? Is there another way to get out of ICS back to HC?
Any suggestions/comments welcome!
EDIT: I flashed FLEXxx V4. Shut it off, problem still there....
Really frustrated. Trying to use the timmiedean tool, but it requires that the unit be shut off in the middle of the process, which kills it. Does anyone know the whereabouts of the blackthund3r revert tool, or the .apx package for his flash tool. I can't find it...
I'm done with this one. On Ebay for parts.... GONE!!!
Have an A100 now, rooted, unlocked,. on Relix
1 more A500 coming next week
Hello everyone This is my first time posting so I hope this is in the correct spot.
I have a Transformer TF101.
I rooted it months ago and can not remember what method I used.
I installed CyanogenMod 10 and everything was fine.
I did an update to one of the nightly builds and now my Transformer is stuck in CWM.
When I plug it into my Windows 7 pc it comes up with a unknown device code 43. I have tried it on several other devices having vista and xp and the same thing happens.
For the heck of it I tried placing the stock FW on the SD card but the transformer does not see it.
I tried placing it in adb mode but the pc still comes up with unknown device.
I have factory reset, wiped cache, and delvik, it is just stuck on CWM.
Can anyone help me with this or did I just totally break the thing? Thank You.
what did you use to flash the rom?
Try doing a cold boot......volume down and power (like you would to boot into recover) but release the keys when the white writting comes up on screen and press nothing.
use v+ and v- to toggle and select the Android or let it kick in itself.
sounds like youve used rom manager
Broke my TF101
scottyf79 said:
what did you use to flash the rom?
Try doing a cold boot......volume down and power (like you would to boot into recover) but release the keys when the white writting comes up on screen and press nothing.
use v+ and v- to toggle and select the Android or let it kick in itself.
sounds like youve used rom manager [/QUOTE
Thank You Scotty: That did get me back so it boots up. None of my computers will see it. Wondering if maybe the cable took a dump. I did use rom Manager. At this point I would like to bring everything back to stock and start over. Any suggestions on how to bring back to stock with sync cable not working?
Click to expand...
Click to collapse
best just to get the sync cable and use one of the tools available to make sure it gets done right.
just dont use rom manager bud.....:good:
try this to see if you can fix the recovery loop
Recovery Loop fix with terminal emulator
Hi guys,
I had Pure nexus rom installed:
http://forum.xda-developers.com/nexus-4/development/rom-pure-nexus-project-layers-t3237366
and everything worked fine for weeks. Yesterday I noticed that my nexus 4 is using battery too much, without any reason.. Then my phone turned off, try to restart but it was stuck on google logo. At that point there was 20 or 30% battery left. I boot it to recovery, wipe everything and tried to restore factory settings, cos I didnt have any backup on phone. But again it was stuck on google logo.
So now I cant boot it cos there's no system installed on it, basicaly there is nothing on my phone. I tried Nexus Root Toolkit, but my pc dont recognize my phone, when I boot to recovery it's still the same, so I cant install drivers..
At this point, I have no idea what to do.. Can anyone help pls?
Thx
Can you get into fastboot? Are you using Win7? Tried different USB ports and cables?
audit13 said:
Can you get into fastboot? Are you using Win7? Tried different USB ports and cables?
Click to expand...
Click to collapse
Thx for quick reply !
Yes, I'm using win7 64x, I tried all usb ports and 3 different cables and nothing. I can get into fastboot and recovery, but pc still don't recognize anything..
i am currently under the same situation
only difference is i can still fastboot and flash a recovery (twrp for that matter)
afterwards, when booting to recovery - i can install a rom
once the rom is installed, reboot does not boot into the ROM and instead just displays the google logo - then vibrates a little - then the screen turns off
I just tried on 2 other win7 pc's, still nothing.. Nexus root toolkit just can't establish adb/fastboot connection..
edit: other thing I tried is to copy ROM file on usb stick, and then connect usb stick with micro usb cable to phone, and when I'm in recovery (twrp 3.0.2-0) there is just ''internal storage'' option.. Is that normal, should twrp see external USB drive? Cos I'm thinking that maybe something is wrong with usb charging port (I replaced that board month ago).
Hi,
I have a similar problem:
I had my mobile in working condition and once when upgrading the OS to 5.0.1, it downloaded the OS and was upgrading. During that process, the charge got over and hence the phone was shutdown. There after, it was not proceeding further from Google screen when trying to reboot. So, i thought battery is dead and replaced the battery with a new one. Now, i am getting the following problem:
The phone doesn't turn on(not even getting GOOGLE screen now). But, If I keep holding power button and Volume down button and try to insert the charging cable immediately then i get the boot menu but it wont stay there for even a second and goes to GOOGLE logo screen and gets shut down. Please help me with this.
Hi guys,
I menaged to fix the problem, my problem was charging port (smal L shaped board) that I replaced month ago. That's why there was no connection.
I got another one this morning from ebay, and Nexus Root Toolkit established connection immediately.
guruhg said:
Hi,
I have a similar problem:
I had my mobile in working condition and once when upgrading the OS to 5.0.1, it downloaded the OS and was upgrading. During that process, the charge got over and hence the phone was shutdown. There after, it was not proceeding further from Google screen when trying to reboot. So, i thought battery is dead and replaced the battery with a new one. Now, i am getting the following problem:
The phone doesn't turn on(not even getting GOOGLE screen now). But, If I keep holding power button and Volume down button and try to insert the charging cable immediately then i get the boot menu but it wont stay there for even a second and goes to GOOGLE logo screen and gets shut down. Please help me with this.
Click to expand...
Click to collapse
That looks like a stuck power button.
Try just holding the volume down button and plugging the charger.
If you see the fastboot screen, you have a stuck power button.
Just experienced this issue on a Nexus 5 and I was able to recover from it by "massaging" the power button for a while.
Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!