Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!
Related
Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
LG G2 Stuck @ 49%
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
try with x86
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
i had exact same issue that progress stucked on 49%. if you are using 64bit OS, try to flash it with 32bit(x86) OS
good luck
tinydynamite00 said:
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
Click to expand...
Click to collapse
still no luck
El Killer said:
still no luck
Click to expand...
Click to collapse
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
tinydynamite00 said:
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
Click to expand...
Click to collapse
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
El Killer said:
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
Click to expand...
Click to collapse
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Please READ CAREFULLY
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
Esteef said:
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers. (FROM HERE http://forum.xda-developers.com/showthread.php?t=2471370
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer in download mode, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Click to expand...
Click to collapse
THIS WILL WIPE YOUR PHONE COMPLETELY...
tinydynamite00 said:
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Click to expand...
Click to collapse
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
El Killer said:
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
Click to expand...
Click to collapse
Sounds good. A full charge can make all the difference. I learnt the hard way! One or more of us will be along should you need further help.
I do hope you get this sorted! I've come back from the brink too many times to not believe you won't.
tinydynamite00
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Falaco147 said:
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im trying but i get a battery to low error. i guess i need to charge it longer
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
El Killer said:
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
Click to expand...
Click to collapse
You are welcome... The first time I did it too my battery was at 28% and I panicked since I got the low battery error.
I could of sworn that my phone officially became a paper weight. My heart dropped.
I'm glad you are up and running with the rest of us!
-Esteef
1732359994
hey !
I have the same problem, but... I can't acces to the recovery :/ i tried to install CWM (with Freegee) over Team win recovery and... boot loop :
The rom 4.2.2 flex was gone, no boot animation
-When i pres volum down + power, i have the reset menu, but after that, there is a black screen and it's written at the top left "started usb_start Fastboot Mode ()"
Please, i need your help, i'm so afraid !!
Thx !
Esteef said:
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
THIS WILL WIPE YOUR PHONE COMPLETELY...
Click to expand...
Click to collapse
I know this thread is a bit old, but it saved my butt. Your method worked perfectly. Thank you for this post.
My LG F460 was bricked (error 570), only download mode was working. Esteef method works fine even my pictures and programs was saved. Thanks!
sorry to bother you all. i bricked my device and it's only a few hours old. I rooted it using the io root method. that was painless.
anyway, it didn't brick then. i got a notification from verizon for the 4.4.2 update so I clicked download update it never installed and that's when the bricking started. Anytime I connect it to the computer it opens up like 40 disks and it says cannot be used unless it's formatted so I have to spend a while canceling those out. when I restart the phone it says the lg logo then the screen goes black . im stuck. i've been trying for hours. if i get the phone back i won't root it or do anything. ill deal with the bloatware, whatever. i've tried a lot of different things but to no avail. any help is appreciated. thank you for your time...and wont go into download mode....help please anyone....
i have no recovery installed....every time i try to cut the phone off it vibrates screen goes off and on showing the lg logo very quickly then goes black but remains on until battery drains
Im in the same boat
xdavelope said:
sorry to bother you all. i bricked my device and it's only a few hours old. I rooted it using the io root method. that was painless.
anyway, it didn't brick then. i got a notification from verizon for the 4.4.2 update so I clicked download update it never installed and that's when the bricking started. Anytime I connect it to the computer it opens up like 40 disks and it says cannot be used unless it's formatted so I have to spend a while canceling those out. when I restart the phone it says the lg logo then the screen goes black . im stuck. i've been trying for hours. if i get the phone back i won't root it or do anything. ill deal with the bloatware, whatever. i've tried a lot of different things but to no avail. any help is appreciated. thank you for your time...and wont go into download mode....help please anyone....
i have no recovery installed....every time i try to cut the phone off it vibrates screen goes off and on showing the lg logo very quickly then goes black but remains on until battery drains
Click to expand...
Click to collapse
Did just like you with OTA today and now bricked. Guess I will have to call Verizon and see what they can do.
xdavelope said:
sorry to bother you all. i bricked my device and it's only a few hours old. I rooted it using the io root method. that was painless.
anyway, it didn't brick then. i got a notification from verizon for the 4.4.2 update so I clicked download update it never installed and that's when the bricking started. Anytime I connect it to the computer it opens up like 40 disks and it says cannot be used unless it's formatted so I have to spend a while canceling those out. when I restart the phone it says the lg logo then the screen goes black . im stuck. i've been trying for hours. if i get the phone back i won't root it or do anything. ill deal with the bloatware, whatever. i've tried a lot of different things but to no avail. any help is appreciated. thank you for your time...and wont go into download mode....help please anyone....
i have no recovery installed....every time i try to cut the phone off it vibrates screen goes off and on showing the lg logo very quickly then goes black but remains on until battery drains
Click to expand...
Click to collapse
BAYOUREBEL said:
Did just like you with OTA today and now bricked. Guess I will have to call Verizon and see what they can do.
Click to expand...
Click to collapse
DId you not try and go back to stock?...
http://forum.xda-developers.com/showthread.php?t=2432476
xdavelope said:
sorry to bother you all. i bricked my device and it's only a few hours old. I rooted it using the io root method. that was painless.
anyway, it didn't brick then. i got a notification from verizon for the 4.4.2 update so I clicked download update it never installed and that's when the bricking started. Anytime I connect it to the computer it opens up like 40 disks and it says cannot be used unless it's formatted so I have to spend a while canceling those out. when I restart the phone it says the lg logo then the screen goes black . im stuck. i've been trying for hours. if i get the phone back i won't root it or do anything. ill deal with the bloatware, whatever. i've tried a lot of different things but to no avail. any help is appreciated. thank you for your time...and wont go into download mode....help please anyone....
i have no recovery installed....every time i try to cut the phone off it vibrates screen goes off and on showing the lg logo very quickly then goes black but remains on until battery drains
Click to expand...
Click to collapse
If you can't boot into stock recovery (vol down + power key) and can't get into download mode (this is where they detect root once FW update shows up and the bottom left corner says Bootloader: ROOTED) then you can rest assure as long as you are under warranty, send it in to LG directly.
Do not send it to Verizon as you may incur charges for replacement. There's insurance from Verizon, but the real "replace with no charge" warranty is sending it to LG directly. Make an account on their website, register your G2, and make a Repair request by online chat or phone.
I just got my T-mobile G2 back after 2 weeks with the same issues and while it took a while to get repaired, I didn't pay a penny and it works without T-Mobile ever knowing its different hardware (all they replace is the flash memory that is corrupted in the phone).
Only downside is that it came back with KitKat and unrooted which means I have to wait for a working root procedure for it unlike with JB (I'm not afraid to root it again since I know what messed it up before was custom recovery TWRP version 2.6.3.2 that doesn't support KitKat lol).
hyelton said:
DId you not try and go back to stock?...
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
He can't get into download mode which means no KDZ flashing.
MDA400 said:
If you can't boot into stock recovery (vol down + power key) and can't get into download mode (this is where they detect root once FW update shows up and the bottom left corner says Bootloader: ROOTED) then you can rest assure as long as you are under warranty, send it in to LG directly.
Do not send it to Verizon as you may incur charges for replacement. There's insurance from Verizon, but the real "replace with no charge" warranty is sending it to LG directly. Make an account on their website, register your G2, and make a Repair request by online chat or phone.
I just got my T-mobile G2 back after 2 weeks with the same issues and while it took a while to get repaired, I didn't pay a penny and it works without T-Mobile ever knowing its different hardware (all they replace is the flash memory that is corrupted in the phone).
Only downside is that it came back with KitKat and unrooted which means I have to wait for a working root procedure for it unlike with JB (I'm not afraid to root it again since I know what messed it up before was custom recovery TWRP version 2.6.3.2 that doesn't support KitKat lol).
He can't get into download mode which means no KDZ flashing.
Click to expand...
Click to collapse
Not getting into download mode is odd especially for just accepting a OTA update. Remember since they accepted the OTA its gonna take a special way of getting into download mode as the phone will be constantly on in boot loop. not all of the time but most of the time when people say they cant get into bootloader they have to keep trying due to the phone has to be "Turned off" OR rebooted at the same time of holding down the key combo.
hyelton said:
Not getting into download mode is odd especially for just accepting a OTA update. Remember since they accepted the OTA its gonna take a special way of getting into download mode as the phone will be constantly on in boot loop. not all of the time but most of the time when people say they cant get into bootloader they have to keep trying due to the phone has to be "Turned off" OR rebooted at the same time of holding down the key combo.
Click to expand...
Click to collapse
To get the phone to turn off, one has to reboot the phone (power key for 10 seconds) while holding volume up WITHOUT having the USB cable plugged in.
Recovery mode is a bit trickier by having to hold the power key for 10 seconds, then just as the phone reboots, hold PWR + VOL DWN and while holding VOL DWN, release PWR and press it again (gets to that factory reset screen where you press PWR 3 times).
Not trying to teach you this if you already know how, just stating it if the OP looks at this then he can try again with the above.
Also, Download mode is essentially the "bootloader" and it is locked meaning unless you have certified software (KDZ FW updater), you can't adb anything just in download mode unlike some LG phones that have emergency mode which is unlocked bootloader.
MDA400 said:
To get the phone to turn off, one has to reboot the phone (power key for 10 seconds) while holding volume up WITHOUT having the USB cable plugged in.
Recovery mode is a bit trickier by having to hold the power key for 10 seconds, then just as the phone reboots, hold PWR + VOL DWN and while holding VOL DWN, release PWR and press it again (gets to that factory reset screen where you press PWR 3 times).
Not trying to teach you this if you already know how, just stating it if the OP looks at this then he can try again with the above.
Also, Download mode is essentially the "bootloader" and it is locked meaning unless you have certified software (KDZ FW updater), you can't adb anything just in download mode unlike some LG phones that have emergency mode which is unlocked bootloader.
Click to expand...
Click to collapse
Yea I know the commands, The guide for going back to stock was created by me for the G2 haha, Hopefully the OP will see your post and try that
ive tried
ive tried factory reset "vol down & power"...its just goes black and stays the same
I'm having about the exact same problem. I rooted my phone a while back, I left it stock and just used some modules (xposed). When I noticed the update I of course was stupid enough to hit the update... My phone is doing the same as his. I can get to the factory reset screen but even if I go through there I get the same black screen (though backlit). I can't boot into download. I'm downloading the .tot needed for stock, but I'm not sure if that'll be a lot of good without download mode. I have everything on my phone backed up from when I rooted it (I'm missing a few pictures but nothing major.) Any and all help would be appreciated. I've got a bunch of precalc homework and Prom in a couple days so I'm willing to sacrifice sleep tonight. Thanks! (Made this account just for this, though I've used the site a bit before.)
xdavelope said:
ive tried factory reset "vol down & power"...its just goes black and stays the same
Click to expand...
Click to collapse
It's cuz you're not doing it correctly.
Yes, you're supposed to depress "vol down & power" but once you see LG logo, let go of both buttons and then immediately hold down only the "power" button.
After a few secs, a white factory reset screen will appear. Ignore the warning and press power button. I know, its kinda scary at first, but then phone will load into recovery.
I can get to the factory data reset screen but when i choose yes it just gives me the secure boot error. I am able to put my phone into download mode by pressing up volume and power when plugging to pc, but cant get pc to recognize it. I am sure I am missing something.
i am also bricked. i cant get into download mode or recovery. i have twrp installed, cant get to that either. i have tried every button combination and all i get is a black screen and vibrations, no lg logo. need help.
Dont
BAYOUREBEL said:
Did just like you with OTA today and now bricked. Guess I will have to call Verizon and see what they can do.
Click to expand...
Click to collapse
Call LG verizon will void your warranty
Has anyone made any progress or did all just send back to LG?
I am in similar shape, can get to the white factory reset screen - which does nothing once I accept.
I can also get into download mode, but the phone isn't recognized.
Wanted to confirm before I try to send it back that I can't fix myself.
Thanks!
Also, did anyone who was able to get back to the hard reset screen have luck sending to LG? Or did it have to be completely bricked?
Im also bricked. And there is no recovery mode. download mode is usable. but when i in twrp before brick i deleted efs because i have a back up after that recovery had corrupted and driver in the rom memory to talk to pc had also deleted with efs(i think). I have an idea to fix but im not sure
If I can change rom from mainboard and replace it other rom from other lg g2? Will it solve my and our problem??????
thanks to reply.
My G2 suddenly just stopped working yesterday. When I try to power it on the phone either freezes shortly after the boot screen, gets to the homescreen then shuts off, or boots to an all blue screen. I can access TWRP but haven't been able to fix it with anything I've found. My pc isn't recognizing the phone so don't know if I can flash another rom. Also tried factory reset with no luck. Any help please this is driving me crazy!!!
The same thing just happened to me! Someone please help us! IS there a solution to this?
dsljk2009 said:
My G2 suddenly just stopped working yesterday. When I try to power it on the phone either freezes shortly after the boot screen, gets to the homescreen then shuts off, or boots to an all blue screen. I can access TWRP but haven't been able to fix it with anything I've found. My pc isn't recognizing the phone so don't know if I can flash another rom. Also tried factory reset with no luck. Any help please this is driving me crazy!!!
Click to expand...
Click to collapse
colbyrainey said:
The same thing just happened to me! Someone please help us! IS there a solution to this?
Click to expand...
Click to collapse
Ok, since there is little to no information out there I thought I would share how I created and fixed this problem.
I received a new phone under warranty because of a failing sim card reader. Naturally, the first thing I did once I received it was root it. Next, I thought I would be slick and use flashify to flash a custom recovery (TWRP). Little did I know, with the new version of Android, our phones have a locked bootloader. I freaked out when I saw some weird error messages about it and tried to power off the device in the middle of it booting. BIG MISTAKE. In hindsight, I am assuming that it was re-flashing the factory recovery when I powered it off.
It gave me a solid blue screen for two hours, unless I held the power button for 10 seconds, which would just repeat the process from black screen to solid blue screen repeatedly. I tried to reboot into recovery for 2 hours by holding volume down and power. 2 HOURS!
At that point, I realized that I may have some luck getting it into download mode by powering it off, then powering it on with volume up and power and plugging in a USB cable. VOILA! It booted up normally (somehow) and I got it running the OS.
After that, I made sure that I did a factory reset by reverting to stock using the LG Software Upgrade tool.
The moral of this story is, if you are going to try to install a custom recovery on 4.4.2, make sure you know what you're doing. It turns out an app called AutoRec did the trick for me.
dsljk2009 - I hope this message helps you, or anyone else who may think they've bricked their phones.
CHEERS LADS!
If this post helped you be sure to hit thanks!
colbyrainey said:
Ok, since there is little to no information out there I thought I would share how I created and fixed this problem.
I received a new phone under warranty because of a failing sim card reader. Naturally, the first thing I did once I received it was root it. Next, I thought I would be slick and use flashify to flash a custom recovery (TWRP). Little did I know, with the new version of Android, our phones have a locked bootloader. I freaked out when I saw some weird error messages about it and tried to power off the device in the middle of it booting. BIG MISTAKE. In hindsight, I am assuming that it was re-flashing the factory recovery when I powered it off.
It gave me a solid blue screen for two hours, unless I held the power button for 10 seconds, which would just repeat the process from black screen to solid blue screen repeatedly. I tried to reboot into recovery for 2 hours by holding volume down and power. 2 HOURS!
At that point, I realized that I may have some luck getting it into download mode by powering it off, then powering it on with volume up and power and plugging in a USB cable. VOILA! It booted up normally (somehow) and I got it running the OS.
After that, I made sure that I did a factory reset by reverting to stock using the LG Software Upgrade tool.
The moral of this story is, if you are going to try to install a custom recovery on 4.4.2, make sure you know what you're doing. It turns out an app called AutoRec did the trick for me.
dsljk2009 - I hope this message helps you, or anyone else who may think they've bricked their phones.
CHEERS LADS!
If this post helped you be sure to hit thanks!
Click to expand...
Click to collapse
Hey,
How did you power off your G2 before putting it into download mode? Im experiencing the same problem.
Please assist me.
jocyrus said:
Hey,
How did you power off your G2 before putting it into download mode? Im experiencing the same problem.
Please assist me.
Click to expand...
Click to collapse
I didn't get the blue screen but I kept getting the security error screen on my d802. To turn it off, I kept holding down the power button for about 10 seconds after the screen went blank. This caused the phone to remain powered off. After that, I was able to boot into download mode. Maybe this method will work for your phone.
audit13 said:
I didn't get the blue screen but I kept getting the security error screen on my d802. To turn it off, I kept holding down the power button for about 10 seconds after the screen went blank. This caused the phone to remain powered off. After that, I was able to boot into download mode. Maybe this method will work for your phone.
Click to expand...
Click to collapse
It didn't work. Any other suggestions? :|
jocyrus said:
It didn't work. Any other suggestions? :|
Click to expand...
Click to collapse
Don't know of any other methods because holding down the power button got the phone to turn off and allow me to get into download mode. From download mode, I was able to restore a stock 5.01 ROM to my phone via LG Mobile Support Tools.
LG G2 Bluescreen then no boot after disconnecting battery
Found my LG G2 with a completely blue screen. It would not turn off. Took it apart and disconnected the battery. Reconnected the battery and there was only a blank black screen and the phone would not boot. Zilch. Even with pressing the power button with the volume down to boot into recovery.....still zilch.
I sucessfully got my phone to work again using a hair dryer trick on an LG G3, which I found here.
1. I took the back off the phone, disconnected the battery, and removed the SIM card.
2. I then used a hairdryer on high heat and blew the heat over the uncovered areas for 10 minutes.
3. I let the phone from hot to warm, reconnected the battery and put it all back together with the SIM card replaced.
4. I booted into recovery and restored a TWRP backup, and my LG G2 is working like a champ again.
My 6T is currently a paperweight (bricked, screen won't turn on, no fastboot, no nothing) and here's the succession of events that led to it:
I live in the US and bought the unlocked 6T.
1) A few weeks ago I rooted it with same steps described in this post --> https://www.xda-developers.com/oneplus-6t-unlock-bootloader-root/. Everything seemed to go well, I had Magisk and my phone worked just fine.
2) About a week later I got a notification that my phone had a software update ready. I idiotically obliged and installed it. After the install, I still got the bootloader unlocked screen at start up so I thought my phone might still be rooted. However, I couldn't download any mods on Magisk and my root checker said I was no longer rooted. So basically, my phone appeared rooted (apps like Google Pay wouldn't work, I got the warning about the Bootloader at start-up, etc.) but I no longer had the benefit of being able to install mods through Magisk.
3) A few weeks later (yesterday) I decided I would explore options for un-rooting, mainly so I could use Google Pay again. Remember, my phone wasn't actually rooted anymore, since the update. So I thought locking the bootloader should fix my problems. I did that with fastboot oem lock and then my phone was stuck in a fastboot loop. I tried every option in fastboot and would just end up right back there. I started looking for fixes and came across the MSMDownload Tool --> http://https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892. I downloaded the driver, it recognized my device, I downloaded the tool, then ran it. At 16 seconds, the download stopped and I got an error saying "Sahara communication failed." After looking up a fix that involved holding down the volume+ button, I decided I'd try again. This is where I f*cked up. I unplugged my phone without stopping the download, and that leads us to this very moment. My phone does not turn on at all. I have no access to fastboot or anything. My computer does recognize it when I plug it back in (I'm on Windows).
If you read this it's probably obvious that I only know enough to be dangerous and bricking my phone was inevitable. Feel free to call me an idiot, I only ask that you provide some useful information, preferably on the subject of getting my phone working again. Thank you all in advance. I hope this post isn't redundant. I didn't find anything on here that was a fix for my situation. I'm also open to contacting OnePlus if anyone thinks I should do that first. I genuinely thank anyone that takes the time to read/help! xd
Use the msm tool...doesn't use fastboot
Edit...nevermind
You need to get your phone to show up as "US8_BULK" like in the MSM thread you linked. You can do this even if your phone wont boot properly. I have done it multiple times before. When in the Qualcom flashing mode the screen will not light up at all.
Hold all the buttons until it resets. This could take up to 30 seconds of holding the buttons. The just follow the steps in the MSM thread starting with this one:
Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process - (https://www.youtube.com/watch?v=PpLvmID1wdI)
Edit: It can take some practice to get the timing down, especially if your screen is not coming on at all. Just keep trying as you will be able to get into that Qualcom flashing mode unless there is physical hardware damage to your phone.
Jager said:
You need to get your phone to show up as "US8_BULK" like in the MSM thread you linked. You can do this even if your phone wont boot properly. I have done it multiple times before. When in the Qualcom flashing mode the screen will not light up at all.
Hold all the buttons until it resets. This could take up to 30 seconds of holding the buttons. The just follow the steps in the MSM thread starting with this one:
Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process -
Edit: It can take some practice to get the timing down, especially if your screen is not coming on at all. Just keep trying as you will be able to get into that Qualcom flashing mode unless there is physical hardware damage to your phone.
Click to expand...
Click to collapse
Awesome, that worked! I kept seeing I needed to hold volume+ and power but holding both and power is what actually worked for me. Thanks a lot my friend
@lapitman, glad to see that you finally got it to work!