Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards
Related
What can we do? I dont want to mess with anything again because i know if anything goes wrong i cant get in to download mode.. But i too want to flash the new roms and gps fixes. Is there anyway to make the hardware buttons unlocked?
Why not use adb? I used it and Odin for the first time two days ago flashing this new patch and it was quite simple. I, like you, have a hardware locked handset. Let's hope it didn't take you nearly the same two hours that it took me.
You can root using clockworks and run some of the patch through clockworks too. Try not to use odin unless you really know what you're doing. A lot have odin hang on them. Other than that, you can flash rom using clockworks.
Sent from my SGH-T959 using XDA App
jonathan3579 said:
Why not use adb? I used it and Odin for the first time two days ago flashing this new patch and it was quite simple. I, like you, have a hardware locked handset. Let's hope it didn't take you nearly the same two hours that it took me.
Click to expand...
Click to collapse
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
TWO HOURS! Lucky SOB, took me over 4 hours, but I was at work with nothing better to do then to play with it on and off, google some more, crawl xda, play some more....rinse repeat...
But I don't think there will be an official "fix" as in their eyes nothing is broken. It is as they intended. I'm not really sure if this move was by tmo or samsung, but regardless it's a PITA. I used ADB. The hardest part is getting the drivers in, after that it's easy cake walk thanks to the wealth of knowledge here at xda.
glensta said:
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
Click to expand...
Click to collapse
exactly my point. this is what happened to me. but think about this lets say i flash a rom right and you know how sometimes it hangs on the vibrant screen and just stays there. and in order to get it back i am going have to use odin. which i cant.......... so i think i wont mess with anything anymore. Rather just wait for official 2.2 ota update.
Chief Geek said:
TWO HOURS! Lucky SOB, took me over 4 hours, but I was at work with nothing better to do then to play with it on and off, google some more, crawl xda, play some more....rinse repeat...
But I don't think there will be an official "fix" as in their eyes nothing is broken. It is as they intended. I'm not really sure if this move was by tmo or samsung, but regardless it's a PITA. I used ADB. The hardest part is getting the drivers in, after that it's easy cake walk thanks to the wealth of knowledge here at xda.
Click to expand...
Click to collapse
Take it back and do a warranty exchange cause the buttons arent working correctly.
I've never tried it because I could never get Kies to connect to my phone, but isn't there a way to update firmware through Kies? I know the i9000 guys use Kies to upgrade, but I think that's only to get drivers and the updates though. I wish Samsung had a better interface than Odin to flash firmware. It's absolute garbage.
Hello, I am new to this android stuff but think I may have a problem and no hardware keys may come into play.
I rooted my phone for no other reason than to remove bloatware
I removed what I new was safe and left alot on the phone just because I was not sure what to remove
Phone was working great and had no problems
I decided I wanted to do a factory reset to remove all my apps and user data etc.....
I did do a titanium back up of my apps so I could easily resinstall if I wanted
I did the reset and now as soon as the phone boots I get TWLauncher force close and just about any other app that tries to load just continuose force close loop
I did not remove the original launcher so I am not sure why this is happening but I cant flash since I cant get into download mode and I cant use ADB since my phone wont let me put into debug what to do?????????????
glensta said:
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
Click to expand...
Click to collapse
This is how I got out of "phone to pc"
get into download mode (i went through it manually, as in plug in the phone, and pressing the volume buttons together at the same time)
Connected to ODIN, and by perfect accident, I clicked on "start" without placing ANY files in ANY spots.
This is what I thought "OMG $h!t" Well my phone was already bricked enough, so i just let it run its course through ODIN. My phone magically rebooted, and it booted into the ROM i had installed before I got the "phone to pc" problem.
Whats the disadvantage of having a hardware locked phone?
From what I'm reading i cant load custom roms? or can use Oden?
Also I just got mine and im sure its hardware locked but how can I tell
TIA
demo23019 said:
Whats the disadvantage of having a hardware locked phone?
From what I'm reading i cant load custom roms? or can use Oden?
Also I just got mine and im sure its hardware locked but how can I tell
TIA
Click to expand...
Click to collapse
The disadvantage is that it is harder (maybe impossible in some situations?) to get into the Download mode if something goes wrong during a ROM update. You can still load custom ROMS but if something goes wrong, you might not be able to get to Download mode to be able to fix it.
I had the phone ! PC screen on mine when I first tried to unsuccessfully flash Vibrant8. Luckily, my Vibrant doesn't seem to be hardware locked and I was able to get back into Download mode and re-flash it with Odin.
I'm able to access download mode with volume keys and i can access recovery mode so i guess im ok
also date on box is 8/27/10
How do you know whether you have a hardware locked Vibrant or not?
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
I trust what you're saying.. but is there any way to test that out without having an already bricked phone? I want to make sure I can recover my phone before flashing your Vibrant hybrid ROM. So after Step 6 do you get the download mode screen? Or does ODIN now show a COM port and it works, even without the little digger guy?
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
First off, absolutely no disrespect Eugene, you are an amazing developer and a HUGE contribution to this forum, I personally love your work and have tried many of your ROM's (actually looking at switching up to your newest hybrid rom next), but there are most certainly some of these phones that are hardware locked to the point that you can not get in to download mode, regardless of what you do. The steps you posted definitely work for some, and for non-hardware locked phones, they work beautifully, however, there are some phones that no matter what you do, no matter what order you do it in, you will never get in to download mode short of using ADB. The good news is, the lockout was not intentional, and exchanging your hardware locked Vibrant will generally result in a non-hardware locked phone (from mine, and many other's personal experience).
johnny12times said:
First off, absolutely no disrespect Eugene, you are an amazing developer and a HUGE contribution to this forum, I personally love your work and have tried many of your ROM's (actually looking at switching up to your newest hybrid rom next), but there are most certainly some of these phones that are hardware locked to the point that you can not get in to download mode, regardless of what you do. The steps you posted definitely work for some, and for non-hardware locked phones, they work beautifully, however, there are some phones that no matter what you do, no matter what order you do it in, you will never get in to download mode short of using ADB. The good news is, the lockout was not intentional, and exchanging your hardware locked Vibrant will generally result in a non-hardware locked phone (from mine, and many other's personal experience).
Click to expand...
Click to collapse
Download Mode is controlled by SBL, so if they truly changed anything that would be the cause.
I would think you could target redbend to update the SBL or even boot.bin bml /stl location.. I've not tried this, nor do I need too.. Just tossing options out there for people to try & don't mind risking a brick..
If you can get the SBL / Boot.bin for the Stock to flash via redbend, then this will solve the HW locks.. Now, Regarding my Phone, I can still get into Download Mode however, only by doing the USB trick &/or ADB reboot download.
I can not get into recovery unless I use clockwork Manager or ADB into
By the way, this is not a Hardware Lock issue as the thread states.. Not being able to get into download Mode like described, is a zImage issue & not the SBL / BOOT.bin
just as a FYI.
~Eugene
Hello, I am new to this android stuff but think I may have a problem and no hardware keys may come into play.
I rooted my phone for no other reason than to remove bloatware
I removed what I new was safe and left alot on the phone just because I was not sure what to remove
Phone was working great and had no problems
I decided I wanted to do a factory reset to remove all my apps and user data etc.....
I did do a titanium back up of my apps so I could easily resinstall if I wanted
I did the reset and now as soon as the phone boots I get TWLauncher force close and just about any other app that tries to load just continuose force close loop
I did not remove the original launcher so I am not sure why this is happening but I cant flash since I cant get into download mode and I cant use ADB since my phone wont let me put into debug what to do?????????????
Click to expand...
Click to collapse
Its happening because you ran a full titanium backup including system data. Yeah, dont do that. Reflash, then reinstall user apps with data, and pick and choose the system ones that are obvious (mms, bluetooth settings, wireless settings, etc.) Then reboot for changes to take effect. When in doubt, dont restore.
Good luck. Although you won't need it if you do what I just told you.
Sent from my SGH-T959 using Tapatalk
Just to share...
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
I had the phone!computer bricked Vibrant, and just got my replacement from Asurion (in fact, of the phones in front of me are from Asurion since my original got stolen 2days after it came out ).
On phone1: The original TMO date is 8/12/2010, while the Asurion date is 8/19/2010. Also the ID is GJ/HLP. This one was HW Locked.
On phone2: The original TMO date is 9/2/2010, while the Asurion date is 9/10/2010. Also the ID is SM/HLP. This one doesn't seem to be HW Loocked, I can get into recovery easily, DL Mode ... not so much . Booting with vol+&- gets me into recovery, but booting with just vol- does nothing ...
Any thoughts?
I Need help i bricked my phone trying to flash kernel and then i started up clockwork and messed with it and formated everything and now the phone stays at Samsung Vibrant screen and like flashes on and off and now the clockwork wont come up
get into download mode.
-Remove battery
-Plug in USB
-Press Both volume buttons
-While holding the buttons, put in Battery.
If youg et to a yellow android digging screen, you can get fixed.
After making sure all this works for you. read this thread and download necessary things.
http://forum.xda-developers.com/showthread.php?t=848737
Thanks for helping him xriderx66
You are not bricked just looped out buddy, follow the posting by xriderx66 or go to S15274N Bible it has more information to read up on
Download mode wont come up ether i formated wiped and formatted everything when i got in there originally i made it worst is there and thing else i can do
Do i have to accses phone or is it sd card cuz i have had trouble with getting it to cennect to my pc
umm..
keep trying Download mode should work as long as your phone has some-sort of lighting up and stuff.
You might be HARDWARE LOCKED, meaning that the volume buttons won't work for you.
You may want to try a JIG. you can see how to build or buy here: http://www.youtube.com/watch?v=Rdn5GoRjhn0
it says captivate but its the same.
a question to you; has you ever been into download mode, or recovery mode without being in the rom, but using the volume buttons to get into it?
I Fixed my phone thanks so much if my mom would have found out she would have killed me i only had phone for 5 days now thanks so much i am back up and running no more flashing for me i am just gonna root now until i learn more about it
My G2 suddenly just stopped working yesterday. When I try to power it on the phone either freezes shortly after the boot screen, gets to the homescreen then shuts off, or boots to an all blue screen. I can access TWRP but haven't been able to fix it with anything I've found. My pc isn't recognizing the phone so don't know if I can flash another rom. Also tried factory reset with no luck. Any help please this is driving me crazy!!!
The same thing just happened to me! Someone please help us! IS there a solution to this?
dsljk2009 said:
My G2 suddenly just stopped working yesterday. When I try to power it on the phone either freezes shortly after the boot screen, gets to the homescreen then shuts off, or boots to an all blue screen. I can access TWRP but haven't been able to fix it with anything I've found. My pc isn't recognizing the phone so don't know if I can flash another rom. Also tried factory reset with no luck. Any help please this is driving me crazy!!!
Click to expand...
Click to collapse
colbyrainey said:
The same thing just happened to me! Someone please help us! IS there a solution to this?
Click to expand...
Click to collapse
Ok, since there is little to no information out there I thought I would share how I created and fixed this problem.
I received a new phone under warranty because of a failing sim card reader. Naturally, the first thing I did once I received it was root it. Next, I thought I would be slick and use flashify to flash a custom recovery (TWRP). Little did I know, with the new version of Android, our phones have a locked bootloader. I freaked out when I saw some weird error messages about it and tried to power off the device in the middle of it booting. BIG MISTAKE. In hindsight, I am assuming that it was re-flashing the factory recovery when I powered it off.
It gave me a solid blue screen for two hours, unless I held the power button for 10 seconds, which would just repeat the process from black screen to solid blue screen repeatedly. I tried to reboot into recovery for 2 hours by holding volume down and power. 2 HOURS!
At that point, I realized that I may have some luck getting it into download mode by powering it off, then powering it on with volume up and power and plugging in a USB cable. VOILA! It booted up normally (somehow) and I got it running the OS.
After that, I made sure that I did a factory reset by reverting to stock using the LG Software Upgrade tool.
The moral of this story is, if you are going to try to install a custom recovery on 4.4.2, make sure you know what you're doing. It turns out an app called AutoRec did the trick for me.
dsljk2009 - I hope this message helps you, or anyone else who may think they've bricked their phones.
CHEERS LADS!
If this post helped you be sure to hit thanks!
colbyrainey said:
Ok, since there is little to no information out there I thought I would share how I created and fixed this problem.
I received a new phone under warranty because of a failing sim card reader. Naturally, the first thing I did once I received it was root it. Next, I thought I would be slick and use flashify to flash a custom recovery (TWRP). Little did I know, with the new version of Android, our phones have a locked bootloader. I freaked out when I saw some weird error messages about it and tried to power off the device in the middle of it booting. BIG MISTAKE. In hindsight, I am assuming that it was re-flashing the factory recovery when I powered it off.
It gave me a solid blue screen for two hours, unless I held the power button for 10 seconds, which would just repeat the process from black screen to solid blue screen repeatedly. I tried to reboot into recovery for 2 hours by holding volume down and power. 2 HOURS!
At that point, I realized that I may have some luck getting it into download mode by powering it off, then powering it on with volume up and power and plugging in a USB cable. VOILA! It booted up normally (somehow) and I got it running the OS.
After that, I made sure that I did a factory reset by reverting to stock using the LG Software Upgrade tool.
The moral of this story is, if you are going to try to install a custom recovery on 4.4.2, make sure you know what you're doing. It turns out an app called AutoRec did the trick for me.
dsljk2009 - I hope this message helps you, or anyone else who may think they've bricked their phones.
CHEERS LADS!
If this post helped you be sure to hit thanks!
Click to expand...
Click to collapse
Hey,
How did you power off your G2 before putting it into download mode? Im experiencing the same problem.
Please assist me.
jocyrus said:
Hey,
How did you power off your G2 before putting it into download mode? Im experiencing the same problem.
Please assist me.
Click to expand...
Click to collapse
I didn't get the blue screen but I kept getting the security error screen on my d802. To turn it off, I kept holding down the power button for about 10 seconds after the screen went blank. This caused the phone to remain powered off. After that, I was able to boot into download mode. Maybe this method will work for your phone.
audit13 said:
I didn't get the blue screen but I kept getting the security error screen on my d802. To turn it off, I kept holding down the power button for about 10 seconds after the screen went blank. This caused the phone to remain powered off. After that, I was able to boot into download mode. Maybe this method will work for your phone.
Click to expand...
Click to collapse
It didn't work. Any other suggestions? :|
jocyrus said:
It didn't work. Any other suggestions? :|
Click to expand...
Click to collapse
Don't know of any other methods because holding down the power button got the phone to turn off and allow me to get into download mode. From download mode, I was able to restore a stock 5.01 ROM to my phone via LG Mobile Support Tools.
LG G2 Bluescreen then no boot after disconnecting battery
Found my LG G2 with a completely blue screen. It would not turn off. Took it apart and disconnected the battery. Reconnected the battery and there was only a blank black screen and the phone would not boot. Zilch. Even with pressing the power button with the volume down to boot into recovery.....still zilch.
I sucessfully got my phone to work again using a hair dryer trick on an LG G3, which I found here.
1. I took the back off the phone, disconnected the battery, and removed the SIM card.
2. I then used a hairdryer on high heat and blew the heat over the uncovered areas for 10 minutes.
3. I let the phone from hot to warm, reconnected the battery and put it all back together with the SIM card replaced.
4. I booted into recovery and restored a TWRP backup, and my LG G2 is working like a champ again.
I have the S7 Edge originally the ATT version but I rooted and flashed the unlocked version firmware. I was trying to unroot the device and restore everything to the factory settings since I am using the trade in program through Samsung and have to send it back in stock. I tried to flash it using Zodin, the Mac version of Odin, but was unable to get it to work because I was not able to get the proper pit file, it always returned with the error that there is a corrupt file. Since I do not have Windows, I could not Flash the firmware using Odin. Out of desperation, I looked online and a website (the article was on Android forums with the title restore stock with flashfire no PC) said that I could use the Android app Flashfire to flash a firmware and return to the factory unrooted settings. I downloaded and inputted the full firmware file for the original AT&T firmware version and checked the boxes to wipe boot, system, internal data, and trusted Zone and also maintain everroot. It seemed to work and was processing with the fast scrolling command text on the black screen but after a few minutes it said there was an error at the very bottom of the screen. Eventually, it restarted but nothing has come up and the screen is black without any light from the LED indicator. I tried to restart it with the power button several times, holding down the power button and the volume down, holding down the home button and the power button, and holding down the power button, volume down, and home button. I left the phone unplugged overnight and plugged it in this morning to see if it would turn on but nothing happens. Any help would be greatly appreciated and I am hoping that I did not brick the phone.
Since Im not sure now if you also tryed to go in download mode again but ussualy you are always able to do that.
If not try to remove battery and put it back in after 10 minuts. And connect it to your laptop and let it charge for a few minuts. Next Hold buttons for dowload mode. Hold em for 5 secconds. Even if still have a blackscreen open samsung kies or switch. One of them has the emergency recovery option. It will detect it then and will say something like you need to repair the software want to continue etc. Lwt it do its thing and make sure you are on the internet. You drink some coffee and give it 30 minuts atleast.
Still not work? Try to put in a spare battery or charge it with another phone. If that not even works. I cant help you.
First of all, I do not have a battery that I can remove. I tried to enter download mode and recovery mode but nothing worked. It will not boot up into any mode.
Just hold the button combination for download mode for 10sec and connect it to a PC with installed smart switch on it. Smart switch should detect your phone, even if the display of the phone stays black.
I tried what you recommended but nothing works still.
I seem to have encountered the same problem, albeit not through exactly the same method. Essentially I managed a full stock firmware flash through ODIN, all the right messages came up and I got a pass from Odin. The phone rebooted and brought up the blue "updating" screen, which very quickly changed to a "removing" screen, at which point the phone froze. When I tried to reboot, the screen went black and now.... nothing. No recovery, no download, no light to indicate that its charging... nothing. My computer doesn't register there is even a device attached.
I've done heaps of flashing and never seen anything like this!
Would greatly appreciate any advice or assistance!
same issue here accept i was just using odin like usual. anyone figure this out yet? the phone was not rooted or anything. i had flashed the g935u firmware and then decided to put it back to stock g935t firmware. then it started doing this.
reflash but this time it check nand erase all
NEVVER EVER CHECK NAND ERASE ALL, dont advise others what you don't know yourself. This is for manufacturer and is not intended for repairing, if you nand erase your phone its just a paper weight then, beyond recoverable. But this issue is caused by wrong partitioning i suppose, but still it must go in download mode, try plugging it in when smartswitch is open in pc while holding home+vol down+power , if it wont detect then i suppose its nand failure due to any reason. And motherboard replacement is required.
Sent from my S7 Edge using XDA Labs
I recommended it because I had the same experience of the black screen and blue led that lights up and I flashed more than 50 times without any result and the solution that was given to me and which walked it's this one
stootie said:
I recommended it because I had the same experience of the black screen and blue led that lights up and I flashed more than 50 times without any result and the solution that was given to me and which walked it's this one
Click to expand...
Click to collapse
If it really did nand erased all, your phone wouldn't even boot, your phone working is a proof it isn't nand erased. What people don't understand is that nand isn't the internal memory, its the non volatile memory holding vital info about functioning of phone just like a bios of computer, so if it is erased you are beyond recoverable damage. Here , i must say i dont know if odin can really nand erase all, because if your phone is working, nand is definitely not erased. And as far as what fixed your issues, there must have been some other reason. But for everyone, leave that option empty just to be safe.
Sent from my S7 Edge using XDA Labs
I was trying to install 935U firmware in my 935V US verizon s7 edge. After installation completed using odin phone rebooted and showed new sim setting something.... after that it went off and now its turning up.
Any help please?
did you find any solution?...plzzz help me i also got the same problem
HEY BRO...FIRST OF ALL , WHOEVER SAID THAT NAND ERASE OPTION AFFECTS PHONE... IM HERE FOR ANSWER. IHAVE FLASHED AND EVERYTIME used nanderase ...my phone feels brand new ..it jst repartitions the size of nand... also adding pit doesnt effect ...your problem is something other ... plug your phone to a good charger whole night.make sure charger is working...then try volume down and home and power into download mode..gudluck
zaighumjawad said:
HEY BRO...FIRST OF ALL , WHOEVER SAID THAT NAND ERASE OPTION AFFECTS PHONE... IM HERE FOR ANSWER. IHAVE FLASHED AND EVERYTIME used nanderase ...my phone feels brand new ..it jst repartitions the size of nand... also adding pit doesnt effect ...your problem is something other ... plug your phone to a good charger whole night.make sure charger is working...then try volume down and home and power into download mode..gudluck
Click to expand...
Click to collapse
Ofcourse it doesn't effect S7 edge, because it DOESNOT wipes the nand.. so its not working simply..
On older phones it will wipe nand totally and thats a dead brick..
First search what nand is.. its the non volatile memory.. or simply nand chip .. if you delete it.. your phone won't be a phone anymore.. its the non volatile memory that is equal to a bios of a computer.. delete non volatile memory and your phone is completely dead..
Thanks to the latest phones that don't erase non volatile memory and instead selecting nand erase with s7 edge simply deletes userdata before flashing.. which is equal to a normal hard reset ..
Sent from my S7 Edge using XDA Labs
Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!